When sending `Key`s, there's no need for an extra separator, because
`send(key.raw)` will send one anyway. Not sending one results in 10 bytes less
PROGMEM used, and plenty of bytes less spent over the wire.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
When we use `lookup()`, we're looking up from the cache, not from the active
layer. If the cache gets updated later than we're called, we won't notice. So do
an explicit lookup.
Fixes#507.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Due to the plugin needing a key coordinate -> geometric space mapping, it
depends on the keyboard used. As such, restrict it to the Keyboard.io Model01,
for which the mapping was set up.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
While the rainbow colors are great, some may want to restrict the colors to a
single hue. For this purpose, the `ripple_hue` property was introduced. It
defaults to `Wavepool.rainbow_hue` (a special value that tells the plugin to use
multiple hues).
Inspired by @bjc's ToyKeeper/Kaleidoscope-LED-Wavepool#8.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Based largely on ToyKeeper/Kaleidoscope-LED-Wavepool#8, this smooths out the hue
transitions, so that the ripple is a nice rainbow, without oddly flashing colors
while cycling through the effect.
Thanks @bjc for the change!
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Methods that originate from the `kaleidoscope::Hardware` base class need not be
documented every time they're being overridden. That leads to duplication, and
higher chance of documentation going stale. As such, remove such cases, and rely
on the base class having plenty of documentation instead.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Since all implementations of detachFromHost/attachToHost are the same for all
our current keyboards, move it to the base class as a default.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This is basically the old Kaleidoscope-Hardware plugin pulled in, and made into
a base class. The purpose is documentation (#167) mostly. The base class has
default implementations for all methods (most do nothing), and can be overridden
by derived classes. Since the hardware object is always going to be called
through `KeyboardHardware`, which has the exact type of the hardware, we do not
need to use virtual functions. The derived class will just shadow the default
implementations.
All hardware plugins were updated to use this (directly or indirectly). The
resulting compiled binary is the same, but we were able to remove a few
boilerplate lines from here and there.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Apparently, the shellcheck on Travis does not like comments after a disable
command, while the one I used locally didn't have a problem with it. Lets make
the one on Travis happy.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
When calling avr-size, we want to expand ${AVR_SIZE_FLAGS}, not pass it as a
single argument, hence, we do not need to - and do not want to! - quote it.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
In general, we want method names to be verbs, because they convey actions. The
`Layer.on()`, `Layer.off()`, etc family of functions weren't like that. It
wasn't immediately obvious that they turn layers on and off.
Furthermore, `Layer.next()` and `Layer.previous()` were even more confusing,
because one could easily think they implied moving to the selected layers, while
in practice, they just activated them.
All of these have new names, that better describe what they do. The old names
are still present, but emit a deprecation warning.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
In the original `KeyboardioFirmware`, this was used to store the default keymap
index in EEPROM. When we removed the EEPROM storage, it was meant to be used by
sketches to set a default layer (the minimum layer one can switch to), which was
not nearly as useful. Even worse, the behaviour was complicated to reason about,
and it wasn't used anyway.
For these reasons, it is now deprecated, and will eventually be removed.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
The examples were recently reorganized, but the documentation was not updated,
so some of them were pointing to dangling, obsolete places. This updates them
all to point to the correct locations.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
As the name implies, this makes it possible to set all leds to the same color
depending on which layer is the topmost active one.
Fixes#492.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
The ATMega32u4 chip Splitography does not have the JTAG interface disabled in
fuses, so we must do so from the firmware. Otherwise PIN_F4 - PIN_F7 would not
be usable for I/O.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
To work around an issue on OSX, initalize Serial as the very first thing in
`Kaleidoscope.setup`. This is a - hopefully - temporary workaround, until we can
track down the real issue.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Based on a discussion on Discord, this implements a simple plugin that can
temporarily disable the Windows (GUI) keys.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
When I did the GPLv3+ -> GPLv3-only change, and assigned my copyright to
Keyboard.io, some of the plugins were missed. This updates those too.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
The ErgoDox typically uses a Teensy, and the Atreus has the option to as well.
In both cases, the flashing procedure (whether through the IDE or CLI) will
require the `teensy_loader_cli` tool installed.
Fixes#479.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
* Uses usbconfig to determine the Model 01's USB modem port.
* Works around incompatibe avrsize flags.
You need to be able to run usbconfig to flash the firmware from the
buildtools. This can be accomplished with appropriate groups and devfs
rules.
Requires gmake, perl, avrdude, and (probably) arduino18 from ports.
The version of avrdude in ports uses an avr-size command that doesn't
understand the -C or --mcu flags. From what I can tell, these flags
are uneccessary, as the size computed with them is the same as what
you get from adding up the appropriate segments from the standard
output of avr-size without any flags. However, since the size is only
informative, I've opted to simply check to see if the command
succeeded, and if not, output a string saying it could not be.
It would probably be better to:
* Determine appropriate flags based on build tools, or,
* Just not use the flags at all, and grab the .text, etc., segment
sizes from the standard output and add them up via `dc` for
display.
I've been using this toolchain to build successfully on FreeBSD 12 for
the Model 01 without issue. It should work with earlier versions of
FreeBSD as well.
Signed-off-by: Brian Cully <bjc@kublai.com>
Gergely Nagy
Gergely Nagy
Brian Almeida
Jesse Vincent
Brian Almeida
Brian Cully