WARP + Button makes no sense together, so reuse the _BUTTON bit for _WARP_END.
This will allow us to use the free'd up bit for something else.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
While it was a neat optimization to only turn LEDs off at init time, that is not
enough if there are other plugins in play, that work with the LEDs independently
of the active LED mode. Such a plugin is LED-ActiveModColor, which never turns
LEDs off, and relies on the LED mode to do that.
Since LEDOff did not turn things off on update(), when used together with
LED-ActiveModColor, the LEDs under the modifiers stayed active, even after the
modifiers went inactive.
With this simple change, LEDOff will now update, and the problem's gone.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
There are - and will be - better ways to turn a plugin on and off, than
having to implement on/off methods on the plugin itself. As such, remove
them.
Fixes#3.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The on/off functions were meant to make it easier to experiment, but
there are - and will be - better ways to achieve the same thing. So
remove them, lest anyone ends up using them.
Fixes#2.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
There are - or will be - better ways to experiment, drop these, lest
anyone starts depending on them.
Fixes#7.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When using AlphaSquareEffect, in the event handler hook, return early if the
currently active LED mode is not us.
Fixes#2.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
If we start with isLEDChanged unset, then after flashing, the `R0C0` key will
remain lit, because we think it is off, while it is not. Setting this flag
results in the first update cycle updating everything, no matter what, which is
the safest thing we can do.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Since we keep the eventHandler on at all times, even when we are not active,
clear the map when switching to the layer. It's easier this way than trying to
turn the eventHandler off.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When we light up a new key, clear the previous one (but only if it isn't the
same, to avoid flickering).
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The new singleton objects implements a LED mode where each pressed key
will light up the appropriate symbol on the LEDs, on the side it was
pressed on. We use different timers for each half.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
While it is possible to play with the ->color property, sometimes one
just wants to override the color once. In this case, saving the previous
value, and changing it back would be an overkill.
Instead, add a few functions that take a color argument as well, and
make the color-less arities use the global property.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of using the supplied linear color component values as-is,
convert them to gamma-corrected, non-linear values first. This way, we
can use numbers like 127 to mean half brightness, and have it
automatically translated to the correct, gamma-corrected value.
Table copied from:
https://learn.adafruit.com/led-tricks-gamma-correction/the-quick-fix
This adds a bit over 256 bytes of code, but makes working with colors a
lot easier.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Call `macroAction` for all `keyState`s, not only when a key toggled on. This
lets the macro itself decide when to act, and makes it possible to have macro
effects on the other states.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
We want to allow plugins to change how keys are looked up - or where they are
looked up from -, and for this, the way we do that final lookup from `keymaps`
or elsewhere, must be overrideable.
We do this by having a `getKey` function pointer in the `Layer_` class, which
defaults to `getKeyFromPROGMEM`. Any plugin, or sketch, can change where
`getKey` points to, and thereby change the way keys are looked up.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
If we want to allow plugins to implement EEPROM storage, it is best if we don't
do anything with EEPROM in the core firmware. As such, remove the
`Layer.defaultLayer` call from `Kaleidoscope.setup`.
With that gone, the `keymap_count` argument is obsolete, so drop it from
`Kaleidoscope.setup()` - but we keep an temporary `setup()` with the old arity,
so that plugins can be updated at a slower pace.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Drop the `load_primary_layer` and `save_primary_layer` methods, because
`save_primary_layer` is not used anywhere, and as such, the whole thing is
pointless at this time.
Furthermore, if we want to allow plugins to implement EEPROM storage, then its
best if we leave the default layer save/load to the plugins too.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To further improve the LED performance, sync only when there is a change. We do
this by tracking when change happens, assuming everyone uses the provided
accessors.
While we do a bit of extra work each cycle to do the tracking, that pales in
comparison to what we gain by not having to transfer data needlessly.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calculating a time delta every time we want to check for a
timeout, compute the projected end ahead of time.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calculating time deltas every time we want to check a
timeout, calculate the projected end ahead of time.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calculating the time delta each time we want to check for a
timeout, calculate the projected ending time ahead of time.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calculating the time delta each time we check for a timeout,
pre-calculate the projected ending time, and compare against that.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calculating the time delta every time we want to check if the
timer elapsed, calculate the projected ending time at the start, and
compare against that.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calculating the elapsed time every time we check the timer,
calculate the projected end-time when we start the timer, and just
compare millis() against that.
Also removes the `.configure()` method, in favour of making the
`timeOut` property public.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of doing a substraction and a compare in the if check, whenever we reset
the timer, add `syncDelay`, and compare against the timer only. Should result in
marginally better performing code.
Thanks @obra for the suggestion!
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Because `led_sync` is a major cause of slowness, do not sync every cycle. In
most cases, it is pointless to sync 100 times a second, about 60 - or even 30 -
may be more than enough.
For this reason, introduce a timer, and a settable delay: we'll only call
`led_sync` once the delay's up. It can be set to 0 to call it every time, but
defaults to 16 (for about 62 syncs/sec), as a safe bet.
This speeds the loop up dramatically, except for the few exceptions where sync
is called.
Fixes#1.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The `CRGB` macro takes rgb values as arguments, in this order, and creates a
`cRGB` instance with the components rearranged to fit the ordering of the
hardware (in the case of the Model01, bgr).
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The `USE_PLUGINS()` macro is a clever hack, to make it seem like
`Kaleidoscope.use()` is type-safe. It pushes its arguments into an appropriately
typed array, so anything that does not fit the criteria, will trigger a compiler
error.
It then never uses the array, and passes the plugins over to
`Kaleidoscope.use`, adding the trailing `NULL`, making it even easier to
use.
Since the array this macro creates is never used, the compiler will
optimize it out fully. As such, by using this macro, we incur neither
any size penalties, nor any run-time penalties. Everything happens at
compile-time.
Fixes#100.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Do not store the previous layer state, and instead of updating only when
the layer changes, just update anyway. It's not that costy anymore, with
the recent `Layer.lookup` optimisations.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To make things easier, just include the main header. It includes
everything else we need, and this way we do not need to cherry pick, nor
care if any of the other headers move, disappear, etc.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Having the hooks, and the hook methods in the Kaleidoscope object means
we don't have to litter the definitions of the arrays around, and that
the hooks are more tied to the object. We pollute the global namespace
less, and having them in the object means that the hook helper functions
will not be optimized out if not used within the Kaleidoscope repo.
All in all, this saves us about 56 bytes of code, allows us to remove
some hacks, and pulls things that are closely knit, closer together.
While there, also changed the name of the `custom_handler_t` and
`custom_loop_t` types to `eventHandlerHook` and `loopHook` (both under
the `Kaleidoscope_` class), to better reflect what they are for.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The plugin.h header only defined the KaleidoscopePlugin class, and while
there was a reason it was separate from Kaleidoscope.h, that reason is
long gone. Merge it there, and remove any reference to plugin.h, as it
is not needed anymore.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Since we pre-fill the cached `keyMap` with the value of `DefaultLayer`, there is
no need to check that layer again, looking for a non-transparent key. Whatever
is there, will be used anyway.
This way we save a cycle for keys that are transparent everywhere but the
default layer.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
We fill the cached `keyMap` with the value of `DefaultLayer`, so if that is the
only layer active, then we can bail out early.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of going through all the active layers each time we are looking for a
key, whenever we switch layers, compute the effective keymap, and store the
indexes. This makes the lookup a considerably faster operation, and lookups
happen far more often than layer switching.
This comes at a cost of ROWS*COLS amount of memory, and a bit of code, but on
the flip side, the lookup operation is now O(1), which is a very nice property
to have, if you want responsiveness. Changing layers is marginally slower,
however, but even with 32 active layers, doing the computation once, instead of
potentially many dozens of time, is still worth it.
We could further reduce the memory requirements if we stored more columns per
byte, but that's for a future optimization.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Renamed the library to Kaleidoscope-LED-ActiveModColor, and followed up with
other renames.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Renamed the library to Kaleidoscope-LEDEffect-SolidColor, and followed up with
other renames.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Renamed the library to Kaleidoscope-GhostInTheFirmware, and followed up with
other renames.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Not all keyboard hardware has per-key LEDs, and not all of them define the LED_*
helpers. To make the LEDControl at least compile for these, guard the
BootAnimation with a Model01-specific ifdef.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of counting loops for the purpose of calculating acceleration, use
timers and steps instead. This means that we can now tune how often the mouse
moves (`speedDelay`), how much it moves when it does (`speed`), how fast
acceleration is (`accelSpeed`), and how often we accelerate (`accelDelay`).
By default, the movement speed is one, and there is no delay, while acceleration
has an 50ms delay, and a speed of one.
But all of these can be tuned at run-time: we can turn off acceleration
completely, or slow down the mouse considerably - the possibilities are almost
endless!
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
As loop counters are not a reliable substitute for timers, because they are
unreliable, use proper timers instead.
Fixes#3.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
With the recent speedup of the scan cycle, we need some delays for the animation
to look nice.
Fixes#2.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Loop counter depends on the speed of the loop, timers don't. As such, timers are
much more reliable, even at the cost of using more data space.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of always iterating through all layers, which slows us down
considerably, keep track of the highest active one, and start from there.
This has a VERY noticeable impact on the speed at which we finish a scan cycle.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Momentary layer switchers were broken, because they had the flags/keyCode parts
swapped. Apparently, I missed these when swapping the rest.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Moved over the primary layer read/write code from KeyboardioFirmware, and
renamed them to `load_primary_layer`/`save_primary_layer`, because they deal
with layers, not keymaps now.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
It had the COLS & ROWS defines, which are hardware-specific, and were moved to
the hardware lib.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Moved all of the hardware-specific code to a separate library. As such, use the
special `KEYBOARDIO_HARDWARE_H` define to include the appropriate header, as set
by the board's `boards.txt`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This is a library that implements the hardware-specific pieces for the
Keyboardio Model01, to be used with KeyboardioFirmware.
It's the same as `src/Model01.cpp`, `src/Model01.h`, `src/KeyboardConfig.cpp`,
`src/KeyboardConfig.h`, `src/utils.cpp`, and `src/utils.h` from
KeyboardioFirmware, merged into two files.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This works both when the hardware bits are still in KeyboardioFirmware, and when
lifted out, too.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When acting on `moveIntent`, set up the direction first, and move the cursor
only once, instead of twice (once for each axis). This makes the movement even
smoother, and also saves us a few bytes of code.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Only pass INJECTED keys through, if we are already active. This way, another
plugin can trigger us by injecting a SYSTER key.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Move the hooks inside the `MouseKeys_` object, and drop the
`handle_mouse_key_event` function, by inlining it into the event handler hook.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calculating separate acceleration for the x and y axes, use only a
single one, that applies to both axes. Thus, holding mouse up, and then pressing
and holding right will move the mouse cursor in a straight diagonal line,
instead of a curve.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of acting on mouse movement keys immediately in the event handler hook,
just store them, and act on them during a loop hook. This has the effect of
collecting all movement intents noticed in a full scan, and acting on them in
one go, rather than acting individually.
This makes diagonal movement (up & right keys pressed at the same time) a lot
smoother, at the cost of a few ms of delay. The delay is not noticeable, and the
smoothing would be a good trade anyway. No more jerky diagonal movements!
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Bail out if the key did NOT toggle on, instead of bailing out only if it did.
This addresses the key count computation part of #1. (Shifting looks fine, after
this change)
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
`TOGGLENUMLOCK` is the index of the macro, to be used in the `macroAction`
function, and `Key_ToggleNumlock` is to be used in the keymap, instead of
`M(0)`. This is considerably friendlier than before.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To make the signature of `macroAction` simple, the `row` and `col` properties
are not passed in every time anymore, but they are available as `Macros.row` and
`Macros.col`, respectively.
This keeps the function simple, but still allows access to these properties for
the rarer case of needing them.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This way the end-user does not have to explicitly call
`Keyboardio.use(&LEDControl)`, it is enough to use a LED effect.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
All of the plugins have been updated, there is no need to keep the deprecated
functions around anymore.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
First of all, to disallow switching to LEDNumlock, we need to do the check in
the `.init()` method, not in `.setup()`. Second, tracking the previous LED mode
can be done a lot simpler - and a lot reliably.
With these changes, the NumLock LED effect works as it is expected to.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When toggling a layer, the same keycode should toggle the layer off, too.
Without this, toggling layers won't work at all, because the target layer will
never be turned off.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Turn the `event_handler_hook_add` and `loop_hook_add` aliases into real
functions, that emit a deprecation warning during compilation. This makes it a
little bit easier to see what needs to be updated still.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
In most cases, one only wants a single copy of a hook. On the other hand,
plugins that depend on other plugins, may want to make it easier for the
end-user to use the plugin, and call the setup function of the dependent plugins
too. In case the end-user calls the same setup function, we'd end up with hooks
registered multiple times.
To avoid this, protection against double-registration has been introduced. The
new `event_handler_hook_use` and `loop_hook_use` functions will only allow one
copy of the hook. The `event_handler_hook_append` and `loop_hook_append`
functions will, on the other hand, just append the hooks, and not care about
protection.
The `event_handler_hook_add` and `loop_hook_add` functions are gone, but for the
time being, they are aliases to the `_use` functions, until all plugins have
been updated, and the aliases can be removed.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Moves the LED control code, along with the built-in effects into the
Keyboardio-LEDControl plugin.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This is a slightly tweaked version of LEDControl from core
KeyboardioFirmware, along with the built-in LED effects.
The one major change is that LED sync is now called just before the update,
instead of at the end of the main loop. This, however, should not be a
noticeable change.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When a key interrupts the one-shot, mask the position out until a key release.
This is needed, because even a short tap usually results in a short hold, which
in turn - without the mask - handles the key.
Instead, we now mask the position out until it is released, so no such problems
arise. Fixes#4.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
I forgot to update the `LCTRL`, `LALT`, etc macros, and they still assumed the
previous order. This little patch fixes that.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
We want to treat the one-shot keys as active even when they were interrupted -
as long as their state is not cleared. This is because when using isActive from
another plugin, or macro, that is usually in response to a key press that
already sets up `shouldCancel` - yet, the modifier is technically active still!
So `isActive` does not check the to-be-cancelled flag anymore. This makes the
Escape-OneShot plugin much more reliable as a consequence.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Useful when writing an event handler that needs to check if a modifier is
active, but may run before OneShot has a chance to re-register the given
modifier.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When another one-shot key is pressed, reset the timer, and handle it as if
starting anew, but without cancelling any previous one-shots. This allows one to
chain one-shots together.
Fixes#3.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
With the swap, using `raw` becomes more straightforward, because the flags will
occupy the higher bits, and the keyCode the lower ones. This makes range checks
much more intuitive.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This is the same Keyboardio-MouseKeys that lived in core KeyboardioFirmware up
until this point. It has been lifted out, the same GPL-2 license file added,
along with a README, and the URL in library.properties has been updated.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This is the same plugin that was in KeyboardioFirmware before, with a README,
and a license file attached, and the URL corrected in library.properties.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
For some delays, the holding was not long enough, or it never triggered. Do that
independently of the other cases, in a separate branch, instead of chaining it
into an else branch.
This makes the example work as desired.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Only turn the LED off if it was on before. Otherwise we will turn off those too
that were not in the map yet.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of relying on the active effect to turn the LED off, do so
ourselves at the end.
Fixes#1.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The macro needs to check `.keyCode` and `.flags` separately, due to byte
ordering. If it does not, it will easily catch other things.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To be able to change the LEDs under a tap-dance key - for example - we need to
know its position. For this reason, remember the position, and use it when
injecting events, and pass them to `tapDanceAction`, too.
Fixes#3.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
If we find a partial match, do not abort, but continue until we either find a
full match, a mismatch, or until we time out. This make it possible to have gaps
in the sequence, where a partial sequence has no explicit handler.
Fixes#1.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Having a long timeout for tap-dance is counter-intuitive, unlike for the other
special keys with timeouts. Use a short one instead.
Fixes#2.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When tapping a tap-dance key handled by `TapDance::actionKeys` more times than
the amount of keys available, treat it as if the last action was to be
triggered. This feels not only more intuitive, but it also allows the counter
and state to reset as soon as possible, resulting in a better typing experience.
Fixes#1.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When a shift is not pressed, press it when a TopsyTurvy key is pressed, and keep
it down as long as the TopsyTurvy key is held, too. Release it when the key
toggles off. This fixes the jitter of #1 in the case where the key is pressed
without a modifier.
In the other case, when a TopsyTurvy key is pressed while a Shift is active too,
send a report after releasing the shifts, to make sure we do not jitter here,
either.
Fixes#1.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of tracking the modifiers in a loop hook, track them in the event
handler. We catch all modifiers, even injected ones. This makes things more
reliable, because the loop hook can also catch modifiers that TopsyTurvy
injected, which is not desirable.
Oh, yeah, we do not catch TopsyTurvy-injected modifiers, because we use the
Keyboard singleton directly, instead of injecting the keys back into the
workflow.
This reduces the jitter described in #1, but does not fix it on its own.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
We are not going to support other firmware than KeyboardioFirmware - if need be,
KeyboardioFirmware will be ported to other hardware instead. As such, remove the
traces of code that suggest otherwise.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Cancel the one-shot state when the interruptor is pressed, not when it is
released. Otherwise, when typing fast, other keys pressed while the interruptor
is still releasing, may have the one-shot effect applied too.
For this to work, we need to do the cancellation post-clear, otherwise the
one-shot modifiers are cleared before they register with the interruptor.
Fixes#1, which used to be keyboardio/Akela#121.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of syncing right after updating, sync at the end of the loop. This
allows hooks (both loop and event handler hooks) to override LED colors, without
cooperation from the active LED effect, and without flickering.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Because we have `raw`, `rawKey` was confusing. Rename it to `keyCode` instead,
which better conveys what the byte is for.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Makes some code not only easier to follow (by not having to use `.raw`
all the time), but for some odd reason, smaller too, in many cases.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
We want the `Keyboardio` object to be a singleton. If it is static, then
each library that gets compiled separately, and uses it in one way or
the other, will have a copy of it.
Making it extern, we'll only have one copy, as it should be.
I don't think there were any bugs caused by it being static, but it was
certainly a tiny bit of wasted code and memory.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
With the Layer code not using the hooks anymore, the Arduino builder will tell
the linker to remove any unreferenced code. As we are using dot_a_linkage, that
means that the hook functions will be removed due to being unreferenced before
plugins had a chance to reference them.
Add a dummy call in Keyboardio_::setup() to prevent this case.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The layer handling is a core functionality, it should be active at all times,
and should be at the very end, before the default event handler. Otherwise there
may be ordering issues, when a plugin wants to return layer keys from its own
event handler.
This also saves us a couple of bytes of both code and data, as an additional
bonus!
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Makes it obvious when one forgets to close the arguments with a sentinel, by
giving the compiler a hint.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When trying to update the LEDs, do not unconditionally call `modes[mode]->init`
and `modes[mode]->update`: we may have no effects installed. This change stops
the firmware from crashing with an NPE if no LED effects are enabled.
Also sets mode and previousMode to zero in the constructor, so we start with a
deterministic state.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of returning a bool, to signal whether further processing should be
done, return a Key. Reason being, if we want to replace a key with another, for
subsequent handlers, it is a lot easier if we can modify what gets passed along,
than it is to inject a key, and try to avoid loops and infinite recursion.
Nevertheless, injecting keys is still possible.
This is not immediately useful for the core firmware, but makes it trivially
easy to upgrade keys from their normal behaviour to something special: for
example, a one-shot handler can auto-promote modifiers to one-shot, simply by
scheduling a promoter handler before the real one.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Some behaviour would benefit from knowing the last report, some would want a
clear report and a way to pre-fill the next one. For this reason, we need two
places to call loop hooks from: one after scanning the matrix and updating LEDs,
and another after sending and clearing the report.
To save space and sanity, we call the same hooks twice, but the second time, we
set the `postClear` flag, which is false the first time.
All users have been updated.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To make keymaps look nicer, easier to read, introduce the `___` and `XXX`
aliases. The former is an alias to `Key_Transparent`, the latter to `Key_NoKey`.
The `genetare_keymaps.pl` tool was updated to support these, too, with the
additional functionality, that all strings that are made up entirely of
underscore or Xes, and are two or more characters long, will be treated as
`___`/`XXX`, respectively. This makes it possible to space keys in a nicer way
in the source layout files.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
`keymapEntry.rawKey` contains the target layer, but offset by
`MOMENTARY_OFFSET`. That value must be subtracted from the value before
comparing it to anything, or switching to another layer.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of having a primary and a temporary layer, store the state of at
most 32 layers in a bitfield. These can be individually turned on and
off, and key lookup starts from the top, and goes downwards until the
default layer to find a non-transparent key.
This allows one to reuse a partially transparent layer: set the default,
and the transparent parts will be reused. The numpad layer was updated
accordingly.
Having an interface to the layer switching things also makes it easier
to build other behaviour on top of these.
As part of the rework, layer handling was moved to a separate file, and into its
own, full-blown handler. Furthermore, we now use a single bit for all keymap
events.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of registering the default handler late, always call it at the end if no
other handler took care of the event. This makes it less of an issue to order
`Keyboardio.use()` and `Keyboardio.setup()`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Introduces the RESERVED bit, a bit reserved for plugins. If it is set, the core
handlers will not handle the event.
Also rearranges the SYNTHETIC bits, to make slightly more sense. In practice,
this means that LED_TOGGLE was promoted to a flag bit, under IS_INTERNAL.
The handler that deals with synthetic events was updated to look at the flag
bits in an order that does not cause confusion, and preparations were also made
to turn it into an independent handler on its own (but that step has not been
taken yet).
This is just groundwork to clean things up, and make the event flow easier to
follow.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
We can't register hooks from constructors, because there is no guaranteed order
in which the objects will be created. So it may well happen that the Keyboardio
object gets created later, and zeroes out everything. Or it gets created first,
and registers the default handler as the first one, making all the others
pointless.
Instead, we create a KeyboardioPlugin class, that has a `begin` method. This is
responsible for setting up the hooks and whatnot. To make things simpler (for
some values of simple), a `Keyboardio.use` method is introduced, which, when
given a NULL-terminated list of plugin object pointers, will call the begin
method of each.
All LED effects and other plugins that used to register a static object now use
an extern, and had their initialization moved to the `begin` method.
The end result is not the nicest thing, but it works. We can try figuring out
something nicer later.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Wraps the value LCTRL & friends in parens, so that they can be easily passed on
to other macros without the compiler getting confused.
Also moved the definition up, just below the _HELD bits, so that these macros
can be used for other key definitions, such as `Key_Pipe`, and so on.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Add a number of helper macros that aid in constructing the Key code for
keys with modifiers held. These can, of course, be embedded in each
other, so to have a key on the keymap that has all currently supported
modifiers pressed, along with `X`, one would write:
`LCTRL(LALT(RALT(LSHIFT(LGUI(X)))))`
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calling loop hooks before anything else, including scanning
the matrix, call it after all that, at the end of `Keyboardio_::loop()`.
This is less surprising, and should not have any ill side-effects,
either.
(Based on a discussion with @obra on IRC.)
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Since macros and other injected keys do not clear the report, we need a way to
release keys. The new `release_key` function does just that, similar to how
`press_key` does it for key presses. It is called by the default event handler
when the `keyState` toggles off, and has the `INJECTED` bit set.
The reason behind this is that keys that will need this special treatment will
always be injected keys. And those injected keys that do not need this
treatment, can be handled by an event handler prior to the default.
This should fix the macros not releasing keys issue.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of hardcoding the macro actions into the core firmware, use a
`macroAction` function that is marked weak. This makes it possible to override
the function from Sketches, and implement the handlers there.
While there, also made sure that the `macroAction` is always called, with
`keyState` argument appropriately set. With this, macro actions can trigger on
keyup, or while held, or anytime the implementor wants, not just on keypress.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of having a previousState and a currentState, of which at most
two bits are used, use a single byte. This saves us a lot of code space,
and makes a number of things easier, too.
The helpers were redone as macros, since they are just bit checks now.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
They are not used anywhere, and as such, are a distraction. The states
will be reworked into something similar that was now dropped, but that's
a separate patch.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To make the code in the keyswitch state checking functions clearer, use
a macro instead of repeating the same constant everywhere.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of abusing `Key_NoKey`, use the new `INJECTED` flag in
`handle_key_event` and `handle_key_event_default` to check if the event
is an original, or an injected one.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The INJECTED flag can be used by handlers to determine where the event
originated from: as a result of a direct keypress, or if it was injected
into the event loop some other way.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When one adds or removes a layer from a keymap, the keymap size has to
be adjusted in the call to `Keyboardio.setup()`. This is easy to forget,
so as a helper, introduce `KEYMAP_SIZE`, a macro that automatically
computes the size at compile time.
This way, one does not need to remember to update the size anywhere.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Save the seen state in EEPROM, so that the boot animation is displayed
only on first boot, and not every time the keyboard boots, or is plugged
in.
This way, we still have a nice welcome animation on first boot, but it
won't become an annoying delay every time the keyboard boots.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The primary reason for the move is to be able to disable mouse keys
completely, and not even compile them in. For this to work, it needs to
be in a separate library, otherwise it will always be included, even if
not active.
So, this patch turns mouse-keys into a simple plugin, included with the
core firmware! This makes the default event handler a bit simpler, the
code marginally smaller, and the feature completely optional.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
With the BootAnimation not functioning as a LED effect anymore, ship a
dedicated off effect.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Having the boot animation as a LED effect, making it function as an
"off" state, while a novel idea, is confusing. For this reason, make it
just a simple function we can call from the Sketch's `setup()` method.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
For those who'd like to work with C arrays, instead of generating
layouts from some other source, the `KEYMAP` macro makes it easier to
define a layer. The parameters in the macro arguments are arranged in
such a way that they can be formatted in a way that matches each hand
more closely. Similarly, a `KEYMAP_STACKED` is introduced, where the
hands are under each other, not side-by-side.
This is just aesthetics, for the C-savvier users.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
It would be nice if LED effects could be activated via their object, not
just their number, so that one could write - say, in a macro -
`myEffect.activate()`, and have it become the active mode.
To implement this, `LEDControl_` gains an `activate` method, that takes
a pointer, finds it in the mode array, and switches to its index (if
found). `LEDMode` gains an `activate` method too, which uses
`LEDControl`s new method of the same name to activate itself.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
While this function had a declaration in the header, it lacked an
implementation. With this patch, `key_led_map` moves to the cpp from the
header, and the function gains an implementation.
An additional helper, `led_set_crgb_at(row, col, color)` is added too,
similarly to the other arities.
This makes it a lot easier to address LEDs when knowing the key
position.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Recreate LEDControl as a class with pluggable parts, similar in vein to
the event handler and loop hooks. Except in this case, only the current
effect runs at any one time, the current one.
All existing effects were separated out into plugins, and the default
firmware example was updated too. All of them were pretty trivial, save
the special NumLock effect: that one also installs a loop hook, and
switches the LED mode if need be. Its setup function also skips to the
next effect, if the mode was selected manually.
Behaviour should be the same as before, but LED effects are now
pluggable, at the cost of some code and data size increase.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of not handling the case where the LED index is out of range,
and thus producing a warning, return a black color instead. It's as good
as anything else, but at least gets rid of the warning.
And, it goes hand-in-hand with the set counterpart, which, in a similar
case, does nothing: thus the out-of-range LED remains black forever.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
After writing the row to Serial, return false, so that the key will be
further processed by the next handler. Also fixes a compile-time warning
with -Wall.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Do the mappedKey lookup earlier, in handle_key_event, so that if any of
our handlers need to look at the mapped key, they do not have to look it
up themselves. This simplifies plugged hooks considerably, as they can
always assume that the mapped key they receive is correct. They still
receive enough information to do the lookup themselves, though, if they
ever need that.
Additionally, in handle_key_event_default, baseKey is only looked up if
mappedKey was NoKey. This is so that hooks can defer to this function,
via handle_key_event, setting their own mappedKey, without having to
worry about setting a row/col that would map to a special key on the
base layer.
Fixes#39.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To make replacing work sanely, we first NULL out both the eventHandlers
and loopHooks arrays in the Keyboardio_ constructor. This allows the
replace functions to just run through the whole array, and either see
hook pointers there, or NULL. So they don't need to be afraid of garbage
being there.
This makes the replacing very easy: run through the array, and replace
the first occurrence of the old hook with the new. This further
simplifies addition: the old hook we pass in, will be NULL. If we run
out of space, it silently fails, like before.
Replacing hooks is important for cases where one wants to build features
that can be toggled off, or their behaviour otherwise changed at
run-time. In this case, the most efficent way is to replace the hook,
which is what these new helpers allow us to do.
This closes#36.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Briefly document the key event handling flow, to make it clearer how the
functions can be used.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
There are scenarios where one would want to inject a keycode into the
event handler chain, restart the processing from scratch, but with a
keycode different than what the lookup would normally yield. For
example, with one-shot modifiers, a feature one may wish is to be able
to turn the one-shotness off, and have them act as normal modifiers.
This is easily done, if we can remove the one-shot markup, and let the
event handler process the resulting code as-is.
This makes that possible: in a custom event handler, just call
handle_key_event() with the first argument set to the desired code, and
the rest left unchanged. This makes it possible to inject events: not
just register keycodes with the HID, but inject synthetic events,
something much more powerful.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This moves the layouts to the sketch directory, so that other sketches
can easily use a different keymap. In the process, not much had to be
changed, and a number of things still remain in the core that assume the
default keymap (such as the NUMPAD_KEYMAP thing in LEDControl.cpp), but
this is a first step.
The downside is that the keymap is no longer static, because that would
conflict with the extern declaration, and the NUMPAD_KEYMAP is a byte,
instead of a compile-time define.
Alltogether, the difference is small enough to be acceptable.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Naively using the "1 << n" shifting will default to 8 bits, because 1
fits in there. To make it 32-bit aware, not just by context (at which
point the damage may have already be done), force the "1" into a
uint32_t.
This silences the warnings, and also corrects the defines.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The RxCx set of macros help addressing key positions within the keydata
the Scanner returns for us. These can be ORed together to form a pattern
to match against, for example, or to look for a certain key by address,
and so on.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Having the default handler in the list by default prevents other things
to hook up before it. Add it in Keyboardio_::setup instead, so that
others have a chance to add themselves first.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Moved the library sources into src/, and the sketch into examples/. This
makes it easier to use the project as a library, and the default
firmware sketch shows up in Arduino IDE's Files/Examples menu. This in
turn, has a very neat side effect: an end user can start from this
example, and when they save it, it will be saved to their Sketchbook,
and the library can be updated independently, without having to worry
about conflicts.
Having the Sketch separate from the sources also paves the way for
moving the keymap there.
As far as Arduino IDE dependencies go: this requires Arduino IDE 1.6.7+,
the same minimum version required previously.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Gergely Nagy
Jesse Vincent
Jesse Vincent