Add a googletest-based test harness & tests

This adds a googletest-based test harness (with googletest pulled into
`testing/googletest`, so we have a fixed state of it), and a few test
cases that demonstrate its use.

Original work by Eric Paniagua in #898, with minor cleanups by Gergely
Nagy.

Signed-off-by: Eric Paniagua <epaniagua@google.com>
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
pull/908/head
Eric Paniagua 4 years ago committed by Gergely Nagy
parent 57814671a5
commit fad1b7e051
No known key found for this signature in database
GPG Key ID: AC1E90BAC433F68F

@ -510,6 +510,11 @@ decompile () {
clean () { clean () {
rm -rf -- "${OUTPUT_PATH}" rm -rf -- "${OUTPUT_PATH}"
kaleidoscope_dir="$(dirname "$0")/.."
(install -d "${kaleidoscope_dir}/testing/googletest/build" &&
cd "${kaleidoscope_dir}/testing/googletest/build" &&
cmake .. &&
make clean)
} }
reset_device() { reset_device() {
@ -573,6 +578,25 @@ EOF
fi fi
} }
build_gtest_gmock() {
kaleidoscope_dir="$(dirname "$0")/.."
(cd "${kaleidoscope_dir}/testing/googletest" && cmake . && make)
}
run_tests() {
(cd "${BOARD_HARDWARE_PATH}/keyboardio" && make prepare-virtual)
build_gtest_gmock
kaleidoscope_dir="$(dirname "$0")/.."
cd "${kaleidoscope_dir}/tests"
${MAKE:-make}
}
docker_tests() {
kaleidoscope_dir="$(dirname "$0")/.."
cd "${kaleidoscope_dir}"
bin/run-docker make -C tests all
}
usage () { usage () {
cat <<- EOF cat <<- EOF
Usage: $0 SKETCH commands... Usage: $0 SKETCH commands...
@ -610,6 +634,9 @@ usage () {
build-all build-all
Build all Sketches we can find. Build all Sketches we can find.
run-tests | docker-tests
Builds and runs the test suite, on the host, and in docker, respectively.
EOF EOF
} }

@ -7,6 +7,10 @@ It is, as yet, incredibly incomplete.
Entries should be included in dictionary order. When describing an identifier of any kind from the codebase, it should be Entries should be included in dictionary order. When describing an identifier of any kind from the codebase, it should be
written using identical capitalization to its use in the code and surrounded by backticks: `identifierName` written using identical capitalization to its use in the code and surrounded by backticks: `identifierName`
## Firmware Terminology
These terms commonly arise when discussing the firmware.
### Cycle ### Cycle
The `loop` method in one's sketch file is the heart of the firmware. It runs - The `loop` method in one's sketch file is the heart of the firmware. It runs -
@ -40,3 +44,54 @@ A point where the core firmware calls [event handlers](#event-handler), allowing
An Arduino library prepared to work with Kaleidoscope. They implement methods An Arduino library prepared to work with Kaleidoscope. They implement methods
from the `kaleidoscope::Plugin` (usually a subset of them). See [event from the `kaleidoscope::Plugin` (usually a subset of them). See [event
handlers](#event-handler) above for a list of methods. handlers](#event-handler) above for a list of methods.
## Testing
These terms arise when discussing the testing framworks and related tests.
### Sim Harness
An abstraction used in testing to inject events into or invoke actions on the
simulated firmware. This abstraction comprises half of the interface to the
[test simulator](#test-simulator).
### Sim State
An abstraction used in testing to encapsulate, snapshot, and examine firmware
state. This abstraction comprises half of the interface to the [test
simulator](#test-simulator).
### Test
An indivial assertion or expectation that must hold for a [test
case](#test-case) to pass.
### Test Case
An indivual `TEST*` macro invocation. Its body consists of one or [tests](#test)
and optionally other code, e.g. to invoke the [test harness](#test-harness).
Note that gtest uses the non-standard term _Test_ for what we call a [Test
Case](#test-case).
### Test File
An individual file containing one or more [test suites](#test-suite).
### Test Fixture
A class comprising setup, teardown, and other code and common state to make
writing [test cases](#test-case) easieer. A fresh object of the fixture class
associated with a [test suite](#test-suite) is constructed for each run of each
[teset case](#test-case) in the [test suite](#test-suite).
### Test Simulator
An abstraction wrapping a virtual firmware build that allows performing
actions against the virtual firmware and reading state out of the virtual
firmware. The interface to the test simular is comprised of the [sim
harness](#sim-harness) and the [sim state](#sim-state).
### Test Suite
A collection of related [test cases](#test-case), optionally with an associated
[test fixture](#test-fixture).

@ -0,0 +1,56 @@
# Automated Testing
## Testing with gtest/gmock
Before feature requests or bug fixes can be merged into master, the folowing
steps should be taken:
- Create a new test suite named after the issue, e.g. `Issue840`.
- Add a test case named `Reproduces` that reproduces the bug. It should fail if
the bug is present and pass if the bug is fixed.
- Merge the proposed fix into a temporary testing branch.
- The reproduction test should fail.
- Add a test called "HasNotRegresed" that detects a potential regression.
It should pass with the fix and fail before the fix.
- Comment out and keep the `Reproduces` test case as documentation.
For an example, see keyboardio:Kaleidoscope/tests/issue_840.
### Adding a New Test Case
For general information on writing test with gtest/gmock see [gtest
docs](https://github.com/google/googletest/tree/master/googletest/docs) and
[gmock docs](https://github.com/google/googletest/tree/master/googlemock/docs).
1. Create a new test file, if appropriate.
1. Choose a new test suite name and create a new test fixture, if appropriate.
1. Write your test case.
The final include in any test file should be `#include
"testing/setup-googletest.h"` which should be followed by the macro
invocation `SETUP_GOOGLETEST()`. This will take care of including headers
commonly used in tests in addtion to gtest and gmock headers.
Any test fixtures should inherit from `VirtualDeviceTest` which wraps the test
sim APIs and provides common setup and teardown functionality. The appropriate
header is already imported by `setup-googletest.h`
### Test Infrastructure
If you need to modify or extend test infrastructure to support your use case,
it can currently be found under `keyboardio:Kaleidoscope/testing`.
### Style
TODO(obra): Fill out this section to your liking.
You can see samples of the desired test style in the [example tests](#examples).
### Examples
All existing tests are examples and may be found under
`keyboardio:Kaleidoscope/tests`.
## Testing with Aglais/Papilio
TODO(obra): Write (or delegate the writing of) this section.

@ -0,0 +1,99 @@
# Release testing
Before a new release of Kaleidoscope, the following test process should be run through on all supported operating systems.
Always run all of the [automated tests](automated-testing.md) to verify there are no regressions.
(As of August 2017, this whole thing really applies to Model01-Firmware, but we hope to generalize it to Kaleidoscope)
# Tested operating systems
* The latest stable Ubuntu Linux release running X11. (We _should_ eventually be testing both X11 and Wayland)
* The latest stable release of macOS
* An older Mac OS X release TBD. (There were major USB stack changes in 10.9 or so)
* Windows 10
* Windows 7
* The current release of ChromeOS
* A currentish android tablet that supports USB Host
* an iOS device (once we fix the usb connection issue to limit power draw)
# Test process
## Basic testing
1. Plug the keyboard in
1. Make sure the host OS doesn't throw an error
1. Make sure the LED in the top left doesn't glow red
1. Make sure the LED in the top-right corner of the left side breathes blue for ~10s
1. Bring up some sort of notepad app or text editor
## Basic testing, part 2
1. Test typing of shifted and unshifted letters and numbers with and without key repeat
1. Test typing of fn-shifted characters: []{}|\ with and without key repeat
1. Test that 'Any' key generates a random letter or number and that key repeat works
1. Test fn-hjkl to move the cursor
1. Test Fn-WASD to move the mouse
1. Test Fn-RFV for the three mouse buttons
1. Test Fn-BGTabEsc for mouse warp
1. Test that LeftFn+RightFn + hjkl move the cursor
1. Verify that leftfn+rightfn do not light up the numpad
## NKRO
1. Open the platform's native key event viewer
(If not available, visit https://www.microsoft.com/appliedsciences/KeyboardGhostingDemo.mspx in a browser)
1. Press as many keys as your fingers will let you
1. Verify that the keymap reports all the keys you're pressing
## Test media keys
1. Fn-Any: previous track
1. Fn-Y: next-track
1. Fn-Enter: play/pause
1. Fn-Butterfly: Windows 'menu' key
1. Fn-n: mute
1. Fn-m: volume down
1. Fn-,: volume up
## Test numlock
1. Tap "Num"
1. Verify that the numpad lights up red
1. Verify that the num key is breathing blue
1. Verify that numpad keys generate numbers
1. Tap the Num key
1. Verify that the numpad keys stop being lit up
1 Verify that 'jkl' don't generate numbers.
## Test LED Effects
1. Tap the LED key
1. Verify that there is a rainbow effect
1. Tap the LED key a few more times and verify that other LED effects show up
1. Verify that you can still type.
## Second connection
1. Unplug the keyboard
1. Plug the keyboard back in
1. Make sure you can still type
## Programming
1. If the OS has a way to show serial port devices, verify that the keyboard's serial port shows up.
1. If you can run stty, as you can on linux and macos, make sure you can tickle the serial port at 1200 bps.
Linux: stty -F /dev/ttyACM0 1200
Mac:
1. If you tickle the serial port without holding down the prog key, verify that the Prog key does not light up red
1. If you hold down the prog key before tickling the serial port, verify that the Prog key's LED lights up red.
1. Unplug the keyboard
1. While holding down prog, plug the keyboard in
1. Verify that the prog key is glowing red.
1. Unplug the keyboard
1. Plug the keyboard in
1. Verify that the prog key is not glowing red.
# If the current platform supports the Arduino IDE (Win/Lin/Mac)
1. use the Arduino IDE to reflash the current version of the software.
1. Verify that you can type a few keys
1. Verify that the LED key toggles between LED effects

@ -0,0 +1,3 @@
**/bin/
**/lib/
**/obj/

@ -0,0 +1,56 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "testing/AbsoluteMouseReport.h"
#include <cstring>
#include "MouseButtons.h"
namespace kaleidoscope {
namespace testing {
AbsoluteMouseReport::AbsoluteMouseReport(const void* data) {
const ReportData& report_data =
*static_cast<const ReportData*>(data);
memcpy(&report_data_, &report_data, sizeof(report_data_));
}
std::vector<uint8_t> AbsoluteMouseReport::Buttons() const {
std::vector<uint8_t> buttons;
const uint8_t bs = report_data_.buttons;
if (bs & MOUSE_LEFT) buttons.push_back(MOUSE_LEFT);
if (bs & MOUSE_RIGHT) buttons.push_back(MOUSE_RIGHT);
if (bs & MOUSE_MIDDLE) buttons.push_back(MOUSE_MIDDLE);
if (bs & MOUSE_PREV) buttons.push_back(MOUSE_PREV);
if (bs & MOUSE_NEXT) buttons.push_back(MOUSE_NEXT);
return buttons;
}
uint16_t AbsoluteMouseReport::XAxis() const {
return report_data_.xAxis;
}
uint16_t AbsoluteMouseReport::YAxis() const {
return report_data_.yAxis;
}
int8_t AbsoluteMouseReport::Wheel() const {
return report_data_.wheel;
}
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,46 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <cstdint>
#include <vector>
#include "DeviceAPIs/AbsoluteMouseAPI.h"
#include "HID-Settings.h"
namespace kaleidoscope {
namespace testing {
class AbsoluteMouseReport {
public:
typedef HID_MouseAbsoluteReport_Data_t ReportData;
static constexpr uint8_t kHidReportType = HID_REPORTID_MOUSE_ABSOLUTE;
AbsoluteMouseReport(const void* data);
std::vector<uint8_t> Buttons() const;
uint16_t XAxis() const;
uint16_t YAxis() const;
int8_t Wheel() const;
private:
ReportData report_data_;
};
} // namespace testing
} // namespce kaleidoscope

@ -0,0 +1,40 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "testing/ConsumerControlReport.h"
#include <cstring>
namespace kaleidoscope {
namespace testing {
ConsumerControlReport::ConsumerControlReport(const void *data) {
const ReportData& report_data =
*static_cast<const ReportData*>(data);
memcpy(&report_data_, &report_data, sizeof(report_data_));
}
std::vector<uint16_t> ConsumerControlReport::Keys() const {
std::vector<uint16_t> keys;
if (report_data_.key1) keys.push_back(report_data_.key1);
if (report_data_.key2) keys.push_back(report_data_.key2);
if (report_data_.key3) keys.push_back(report_data_.key3);
if (report_data_.key4) keys.push_back(report_data_.key4);
return keys;
}
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,43 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <cstdint>
#include <vector>
#include "HID-Settings.h"
#include "MultiReport/ConsumerControl.h"
namespace kaleidoscope {
namespace testing {
class ConsumerControlReport {
public:
typedef HID_ConsumerControlReport_Data_t ReportData;
static constexpr uint8_t kHidReportType = HID_REPORTID_CONSUMERCONTROL;
ConsumerControlReport(const void *data);
std::vector<uint16_t> Keys() const;
private:
ReportData report_data_;
};
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,155 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "testing/HIDState.h"
#include "HID-Settings.h"
#include "testing/fix-macros.h"
// TODO(epan): Add proper logging.
#include <iostream>
#define LOG(x) std::cout
namespace kaleidoscope {
namespace testing {
const std::vector<AbsoluteMouseReport>& HIDState::AbsoluteMouse() const {
return absolute_mouse_reports_;
}
const AbsoluteMouseReport& HIDState::AbsoluteMouse(size_t i) const {
return absolute_mouse_reports_.at(i);
}
const std::vector<ConsumerControlReport>& HIDState::ConsumerControl() const {
return consumer_control_reports_;
}
const ConsumerControlReport& HIDState::ConsumerControl(size_t i) const {
return consumer_control_reports_.at(i);
}
const std::vector<KeyboardReport>& HIDState::Keyboard() const {
return keyboard_reports_;
}
const KeyboardReport& HIDState::Keyboard(size_t i) const {
return keyboard_reports_.at(i);
}
const std::vector<SystemControlReport>& HIDState::SystemControl() const {
return system_control_reports_;
}
const SystemControlReport& HIDState::SystemControl(size_t i) const {
return system_control_reports_.at(i);
}
namespace internal {
// static
void HIDStateBuilder::ProcessHidReport(
uint8_t id, const void* data, int len, int result) {
switch (id) {
case HID_REPORTID_MOUSE: {
LOG(ERROR) << "Dropped MouseReport: unimplemented";
break;
}
case HID_REPORTID_KEYBOARD: {
LOG(ERROR) << "Dropped BootKeyboardReport: unimplemented";
break;
}
case HID_REPORTID_GAMEPAD: {
LOG(ERROR) << "Dropped GamePadReport: unimplemented";
break;
}
case HID_REPORTID_CONSUMERCONTROL: {
ProcessConsumerControlReport(ConsumerControlReport{data});
break;
}
case HID_REPORTID_SYSTEMCONTROL: {
ProcessSystemControlReport(SystemControlReport{data});
break;
}
case HID_REPORTID_MOUSE_ABSOLUTE: {
ProcessAbsoluteMouseReport(AbsoluteMouseReport{data});
break;
}
case HID_REPORTID_NKRO_KEYBOARD: {
ProcessKeyboardReport(KeyboardReport{data});
break;
}
default:
LOG(ERROR) << "Encountered unknown HID report with id = " << id;
}
}
// static
std::unique_ptr<HIDState> HIDStateBuilder::Snapshot() {
auto hid_state = std::make_unique<HIDState>();
// Populate state.
// TODO: Grab a copy of current instantaneous state, like:
// key states, layer stack, led states
hid_state->absolute_mouse_reports_ = std::move(absolute_mouse_reports_);
hid_state->consumer_control_reports_ = std::move(consumer_control_reports_);
hid_state->keyboard_reports_ = std::move(keyboard_reports_);
hid_state->system_control_reports_ = std::move(system_control_reports_);
Clear(); // Clear global state.
return hid_state;
}
// static
void HIDStateBuilder::Clear() {
absolute_mouse_reports_.clear();
consumer_control_reports_.clear();
keyboard_reports_.clear();
system_control_reports_.clear();
}
// static
void HIDStateBuilder::ProcessAbsoluteMouseReport(const AbsoluteMouseReport& report) {
absolute_mouse_reports_.push_back(report);
}
// static
void HIDStateBuilder::ProcessConsumerControlReport(const ConsumerControlReport& report) {
consumer_control_reports_.push_back(report);
}
// static
void HIDStateBuilder::ProcessKeyboardReport(const KeyboardReport& report) {
keyboard_reports_.push_back(report);
}
// static
void HIDStateBuilder::ProcessSystemControlReport(const SystemControlReport& report) {
system_control_reports_.push_back(report);
}
// static
std::vector<AbsoluteMouseReport> HIDStateBuilder::absolute_mouse_reports_;
// static
std::vector<ConsumerControlReport> HIDStateBuilder::consumer_control_reports_;
// static
std::vector<KeyboardReport> HIDStateBuilder::keyboard_reports_;
// static
std::vector<SystemControlReport> HIDStateBuilder::system_control_reports_;
} // namesapce internal
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,81 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "testing/AbsoluteMouseReport.h"
#include "testing/ConsumerControlReport.h"
#include "testing/KeyboardReport.h"
#include "testing/SystemControlReport.h"
// Out of order due to macro conflicts.
#include "testing/fix-macros.h"
#include <memory>
namespace kaleidoscope {
namespace testing {
namespace internal {
class HIDStateBuilder;
}
class HIDState {
public:
const std::vector<AbsoluteMouseReport>& AbsoluteMouse() const;
const AbsoluteMouseReport& AbsoluteMouse(size_t i) const;
const std::vector<ConsumerControlReport>& ConsumerControl() const;
const ConsumerControlReport& ConsumerControl(size_t i) const;
const std::vector<KeyboardReport>& Keyboard() const;
const KeyboardReport& Keyboard(size_t i) const;
const std::vector<SystemControlReport>& SystemControl() const;
const SystemControlReport& SystemControl(size_t i) const;
private:
friend class internal::HIDStateBuilder;
std::vector<AbsoluteMouseReport> absolute_mouse_reports_;
std::vector<ConsumerControlReport> consumer_control_reports_;
std::vector<KeyboardReport> keyboard_reports_;
std::vector<SystemControlReport> system_control_reports_;
};
namespace internal {
class HIDStateBuilder {
public:
static void ProcessHidReport(
uint8_t id, const void* data, int len, int result);
static std::unique_ptr<HIDState> Snapshot();
private:
static void Clear();
static void ProcessAbsoluteMouseReport(const AbsoluteMouseReport& report);
static void ProcessConsumerControlReport(const ConsumerControlReport& report);
static void ProcessKeyboardReport(const KeyboardReport& report);
static void ProcessSystemControlReport(const SystemControlReport& report);
static std::vector<AbsoluteMouseReport> absolute_mouse_reports_;
static std::vector<ConsumerControlReport> consumer_control_reports_;
static std::vector<KeyboardReport> keyboard_reports_;
static std::vector<SystemControlReport> system_control_reports_;
};
} // namespace internal
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,41 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "testing/KeyboardReport.h"
#include <cstring>
namespace kaleidoscope {
namespace testing {
KeyboardReport::KeyboardReport(const void* data) {
const ReportData& report_data =
*static_cast<const ReportData*>(data);
memcpy(&report_data_, &report_data, sizeof(report_data_));
}
std::vector<uint8_t> KeyboardReport::ActiveKeycodes() const {
std::vector<uint8_t> active_keys;
for (uint8_t i = 0; i < HID_LAST_KEY; ++i) {
uint8_t bit = 1 << (uint8_t(i) % 8);
uint8_t key_code = report_data_.keys[i / 8] & bit;
if (key_code) active_keys.push_back(i);
}
return active_keys;
}
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,43 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <cstdint>
#include <vector>
#include "HID-Settings.h"
#include "MultiReport/Keyboard.h"
namespace kaleidoscope {
namespace testing {
class KeyboardReport {
public:
typedef HID_KeyboardReport_Data_t ReportData;
static constexpr uint8_t kHidReportType = HID_REPORTID_NKRO_KEYBOARD;
KeyboardReport(const void* data);
std::vector<uint8_t> ActiveKeycodes() const;
private:
ReportData report_data_;
};
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,47 @@
/* kailedoscope::sim - Harness for Unit Testing Kaleidoscope
* Copyright (C) 2020 Eric Paniagua <epaniagua@google.com>
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "Kaleidoscope.h"
#include "testing/SimHarness.h"
#include "testing/fix-macros.h"
#include <iostream>
namespace kaleidoscope {
namespace testing {
void SimHarness::RunCycle() {
Kaleidoscope.loop();
}
void SimHarness::RunCycles(size_t n) {
for (size_t i = 0; i < n; ++i) RunCycle();
}
void SimHarness::Press(uint8_t row, uint8_t col) {
Kaleidoscope.device().keyScanner().setKeystate(
KeyAddr{row, col},
kaleidoscope::Device::Props::KeyScanner::KeyState::Pressed);
}
void SimHarness::Release(uint8_t row, uint8_t col) {
Kaleidoscope.device().keyScanner().setKeystate(
KeyAddr{row, col},
kaleidoscope::Device::Props::KeyScanner::KeyState::NotPressed);
}
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,35 @@
/* kailedoscope::sim - Simulator for Unit Testing Kaleidoscope
* Copyright (C) 2020 Eric Paniagua <epaniagua@google.com>
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <cstddef>
#include <cstdint>
namespace kaleidoscope {
namespace testing {
class SimHarness {
public:
void RunCycle();
void RunCycles(size_t n);
void Press(uint8_t row, uint8_t col);
void Release(uint8_t row, uint8_t col);
};
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,34 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "testing/State.h"
namespace kaleidoscope {
namespace testing {
// static
std::unique_ptr<State> State::Snapshot() {
auto state = std::make_unique<State>();
state->hid_state_ = internal::HIDStateBuilder::Snapshot();
return state;
}
const HIDState* State::HIDReports() const {
return hid_state_.get();
}
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,43 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <cstddef>
#include <cstdint>
#include <vector>
#include "testing/HIDState.h"
// Out of order due to macro conflicts.
#include "testing/fix-macros.h"
#include <memory>
namespace kaleidoscope {
namespace testing {
class State {
public:
static std::unique_ptr<State> Snapshot();
const HIDState* HIDReports() const;
private:
std::unique_ptr<HIDState> hid_state_;
};
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,38 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "testing/SystemControlReport.h"
#include <cstring>
namespace kaleidoscope {
namespace testing {
SystemControlReport::SystemControlReport(const void* data) {
const ReportData& report_data =
*static_cast<const ReportData*>(data);
memcpy(&report_data_, &report_data, sizeof(report_data_));
if (report_data_.key != 0) {
this->push_back(report_data_.key);
}
}
uint8_t SystemControlReport::Key() const {
return report_data_.key;
}
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,43 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <cstdint>
#include <vector>
#include "HID-Settings.h"
#include "MultiReport/SystemControl.h"
namespace kaleidoscope {
namespace testing {
class SystemControlReport : public std::vector<uint8_t> {
public:
typedef HID_SystemControlReport_Data_t ReportData;
static constexpr uint8_t kHidReportType = HID_REPORTID_SYSTEMCONTROL;
SystemControlReport(const void* data);
uint8_t Key() const;
private:
ReportData report_data_;
};
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,87 @@
Build System
============
Directory structure
- Test infrastructure should be able to be hierarchically organized
Future Work
===========
Issue 867
- Infra changes: none needed
- Testing 867
- Design a set of layers that allows all the test cases you would like, and configure them in a sketch.
- If you need multiple sets of layers, the current build mechanism requires splitting
the test code in two, each with its corresponding sketch.
- Navigate between layers using sim_.Press(row, col) and sim_.Release(row, col) as a user
would with the test sketch loaded.
- Verify that the right keys are pressed (based on the current layer) using
EXPECT_THAT(state->HidReports()->Keyboard(0), Contains(Key_A))
- See issue_840 for example usage.
Testing LED activation
- Infra changes
- Create an LedState class to hold a snapshot of LED activations.
- Add an led_state_ member to State together with whatever accessors are convenient.
- If the accessors are complicated or you just want to namespace that part of the global state,
create a state module for LEDs following the pattern implemented for HIDState.
- Of course, the HIDReportObserver stuff doesn't apply here.
- Modify State::Snapshot to copy the current LED state into led_state_
- This must be a copy, not a reference, as it may be desirable to compare state objects
generated at different times.
- Consider whether there are any sensible LED-specific "matchers" (in the gmock sense) that could
be added to make LED tests more readable.
- See https://github.com/google/googletest/blob/master/googlemock/docs/cook_book.md for instructions
and examples on writing new matchers
- Add USB simulation, eg to test Focus and FocusSerial
- It would be nice if there were a way to specify the test firmware configuration directly in the test
(ie *_test.cpp) files
Design of the Testing Simulator
===============================
Two halves of the simulator, each an abstraction to isolate tests from firmware implementation details
and thereby decrease the maintence cost of tests.
- SimHarness
- This is what lets you prod the firmware, e.g. with a change in keyswitch state
- Any new ways of feeding input to the simulated firmware should do so through this abstraction
- State
- This is a snapshot of the global firmware state. It is currently only intended to be accessible via
the snapshot returned by RunCycle.
- Should always be a copy of firmware state, never a reference or pointer to it.
- In general it is desirable to be able to compare aspects of state from two different "times" in
the simulation.
Both halves may end up with modular structure as complexity grows. This is fine as long as the basic
abstractions and division of responsibilities are maintained.
BEFORE MERGING
==============
- The bundle repo should merge branch `epan/build/justlib`. The test infra depends on the changes in
that branch.
- Consider whether you want to add the following before or after merging (and delay merging if appropriate):
- Fleshing out the coverage of HID reports by HID state.
- Adding LED output capture to State.
- Please impement a proper logging solution (rather than dumping almost everything to stdout/stderr and
needing to sort through it manually at fixed verbosity)
- Some desirable properties of a logging system
- Global verbosity levels (e.g. INFO, WARNING, ERROR, FATAL)
- Custom verbosity levels
- Local verbosity levels, eg per file, ideally configurable in a central and obvious location like the command line
- See parseCommandLine in virtual/cores/main.cpp for the hook that would need to be overridden
- Logging macros that compile away to nothing in production builds (ie where NDEBUG is defined)
- This allows logging directly from the firmware code at no space or time cost to the real firmware
- glog is a good example of some desirable capabilities in a logging system, if not a good system to adopt.
For portability for developers, please get the test build system to play well with Docker
- (right now, cmake isn't playing well with Docker)
Update testing documentation as appropriate to relfect changes to test infra or to directory structures.
- See docs/codebase/testing/automated-testing.md
- Add links into the codebase as appropriate
What I'd do with Another Solid Week
===================================
- Add coverage of remaining HID report types
- Add capture of LED state
- Pick several reported bugs and write up tests to reproduce them and then regression tests once they've been fixed
- My main goal here would be to exercise the framwork to identify pain points or other areas for improvement
- Write a test-specific plugin that supports snapshotting state each time one of its event handlers is called
- More formally document the test simulator's design and usage
- If there were time left and earlier steps were to bear out the need...
- Add the ability to inject synthetic events or events at a given delay into the future
- Improve the simulator's concept of time and trigger events against the firmware, interleaving them in the right
order with a time-based priority queue

@ -0,0 +1,35 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "testing/VirtualDeviceTest.h"
#include "HIDReportObserver.h"
#include "testing/HIDState.h"
namespace kaleidoscope {
namespace testing {
void VirtualDeviceTest::SetUp() {
HIDReportObserver::resetHook(&internal::HIDStateBuilder::ProcessHidReport);
}
std::unique_ptr<State> VirtualDeviceTest::RunCycle() {
sim_.RunCycle();
return State::Snapshot();
}
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,42 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <cstddef>
#include "testing/SimHarness.h"
#include "testing/State.h"
// Out of order due to macro conflicts.
#include "testing/fix-macros.h"
#include "gtest/gtest.h"
#include <memory>
namespace kaleidoscope {
namespace testing {
class VirtualDeviceTest : public ::testing::Test {
protected:
void SetUp();
std::unique_ptr<State> RunCycle();
SimHarness sim_;
};
} // namespace testing
} // namespace kaleidoscope

@ -0,0 +1,26 @@
/* -*- mode: c++ -*-
* Copyright (C) 2020 Eric Paniagua (epaniagua@google.com)
*
* This program is free software: you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free Software
* Foundation, version 3.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
* FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
// No `#pragma once` since these undefs need to have every time a Kaleidoscope/
// Arduino header is included before non-Kaleidoscope/Arduino header.
// #pragma once
#undef min
#undef max
#undef T
#undef U
#undef TEST

@ -0,0 +1,4 @@
# Run manually to reformat a file:
# clang-format -i --style=file <file>
Language: Cpp
BasedOnStyle: Google

@ -0,0 +1,84 @@
# Ignore CI build directory
build/
xcuserdata
cmake-build-debug/
.idea/
bazel-bin
bazel-genfiles
bazel-googletest
bazel-out
bazel-testlogs
# python
*.pyc
# Visual Studio files
.vs
*.sdf
*.opensdf
*.VC.opendb
*.suo
*.user
_ReSharper.Caches/
Win32-Debug/
Win32-Release/
x64-Debug/
x64-Release/
# Ignore autoconf / automake files
Makefile.in
aclocal.m4
configure
build-aux/
autom4te.cache/
googletest/m4/libtool.m4
googletest/m4/ltoptions.m4
googletest/m4/ltsugar.m4
googletest/m4/ltversion.m4
googletest/m4/lt~obsolete.m4
googlemock/m4
# Ignore generated directories.
googlemock/fused-src/
googletest/fused-src/
# macOS files
.DS_Store
googletest/.DS_Store
googletest/xcode/.DS_Store
# Ignore cmake generated directories and files.
CMakeFiles
CTestTestfile.cmake
Makefile
cmake_install.cmake
googlemock/CMakeFiles
googlemock/CTestTestfile.cmake
googlemock/Makefile
googlemock/cmake_install.cmake
googlemock/gtest
/bin
/googlemock/gmock.dir
/googlemock/gmock_main.dir
/googlemock/RUN_TESTS.vcxproj.filters
/googlemock/RUN_TESTS.vcxproj
/googlemock/INSTALL.vcxproj.filters
/googlemock/INSTALL.vcxproj
/googlemock/gmock_main.vcxproj.filters
/googlemock/gmock_main.vcxproj
/googlemock/gmock.vcxproj.filters
/googlemock/gmock.vcxproj
/googlemock/gmock.sln
/googlemock/ALL_BUILD.vcxproj.filters
/googlemock/ALL_BUILD.vcxproj
/lib
/Win32
/ZERO_CHECK.vcxproj.filters
/ZERO_CHECK.vcxproj
/RUN_TESTS.vcxproj.filters
/RUN_TESTS.vcxproj
/INSTALL.vcxproj.filters
/INSTALL.vcxproj
/googletest-distribution.sln
/CMakeCache.txt
/ALL_BUILD.vcxproj.filters
/ALL_BUILD.vcxproj

@ -0,0 +1,73 @@
# Build matrix / environment variable are explained on:
# https://docs.travis-ci.com/user/customizing-the-build/
# This file can be validated on:
# http://lint.travis-ci.org/
language: cpp
# Define the matrix explicitly, manually expanding the combinations of (os, compiler, env).
# It is more tedious, but grants us far more flexibility.
matrix:
include:
- os: linux
before_install: chmod -R +x ./ci/*platformio.sh
install: ./ci/install-platformio.sh
script: ./ci/build-platformio.sh
- os: linux
dist: xenial
compiler: gcc
install: ./ci/install-linux.sh && ./ci/log-config.sh
script: ./ci/build-linux-bazel.sh
- os: linux
dist: xenial
compiler: clang
install: ./ci/install-linux.sh && ./ci/log-config.sh
script: ./ci/build-linux-bazel.sh
- os: linux
compiler: gcc
env: BUILD_TYPE=Debug VERBOSE=1 CXX_FLAGS=-std=c++11
- os: linux
compiler: clang
env: BUILD_TYPE=Release VERBOSE=1 CXX_FLAGS=-std=c++11 -Wgnu-zero-variadic-macro-arguments
- os: linux
compiler: clang
env: BUILD_TYPE=Release VERBOSE=1 CXX_FLAGS=-std=c++11 NO_EXCEPTION=ON NO_RTTI=ON COMPILER_IS_GNUCXX=ON
- os: osx
compiler: gcc
env: BUILD_TYPE=Release VERBOSE=1 CXX_FLAGS=-std=c++11 HOMEBREW_LOGS=~/homebrew-logs HOMEBREW_TEMP=~/homebrew-temp
- os: osx
compiler: clang
env: BUILD_TYPE=Release VERBOSE=1 CXX_FLAGS=-std=c++11 HOMEBREW_LOGS=~/homebrew-logs HOMEBREW_TEMP=~/homebrew-temp
# These are the install and build (script) phases for the most common entries in the matrix. They could be included
# in each entry in the matrix, but that is just repetitive.
install:
- ./ci/install-${TRAVIS_OS_NAME}.sh
- . ./ci/env-${TRAVIS_OS_NAME}.sh
- ./ci/log-config.sh
script: ./ci/travis.sh
# This section installs the necessary dependencies.
addons:
apt:
# List of whitelisted in travis packages for ubuntu-precise can be found here:
# https://github.com/travis-ci/apt-package-whitelist/blob/master/ubuntu-precise
# List of whitelisted in travis apt-sources:
# https://github.com/travis-ci/apt-source-whitelist/blob/master/ubuntu.json
sources:
- ubuntu-toolchain-r-test
- llvm-toolchain-precise-3.9
packages:
- g++-4.9
- clang-3.9
update: true
homebrew:
packages:
- ccache
- gcc@4.9
- llvm@4
update: true
notifications:
email: false

@ -0,0 +1,179 @@
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Bazel Build for Google C++ Testing Framework(Google Test)
load("@rules_cc//cc:defs.bzl", "cc_library", "cc_test")
package(default_visibility = ["//visibility:public"])
licenses(["notice"])
config_setting(
name = "windows",
constraint_values = ["@bazel_tools//platforms:windows"],
)
config_setting(
name = "has_absl",
values = {"define": "absl=1"},
)
# Library that defines the FRIEND_TEST macro.
cc_library(
name = "gtest_prod",
hdrs = ["googletest/include/gtest/gtest_prod.h"],
includes = ["googletest/include"],
)
# Google Test including Google Mock
cc_library(
name = "gtest",
srcs = glob(
include = [
"googletest/src/*.cc",
"googletest/src/*.h",
"googletest/include/gtest/**/*.h",
"googlemock/src/*.cc",
"googlemock/include/gmock/**/*.h",
],
exclude = [
"googletest/src/gtest-all.cc",
"googletest/src/gtest_main.cc",
"googlemock/src/gmock-all.cc",
"googlemock/src/gmock_main.cc",
],
),
hdrs = glob([
"googletest/include/gtest/*.h",
"googlemock/include/gmock/*.h",
]),
copts = select({
":windows": [],
"//conditions:default": ["-pthread"],
}),
defines = select({
":has_absl": ["GTEST_HAS_ABSL=1"],
"//conditions:default": [],
}),
features = select({
":windows": ["windows_export_all_symbols"],
"//conditions:default": [],
}),
includes = [
"googlemock",
"googlemock/include",
"googletest",
"googletest/include",
],
linkopts = select({
":windows": [],
"//conditions:default": ["-pthread"],
}),
deps = select({
":has_absl": [
"@com_google_absl//absl/debugging:failure_signal_handler",
"@com_google_absl//absl/debugging:stacktrace",
"@com_google_absl//absl/debugging:symbolize",
"@com_google_absl//absl/strings",
"@com_google_absl//absl/types:optional",
"@com_google_absl//absl/types:variant",
],
"//conditions:default": [],
}),
)
cc_library(
name = "gtest_main",
srcs = ["googlemock/src/gmock_main.cc"],
features = select({
":windows": ["windows_export_all_symbols"],
"//conditions:default": [],
}),
deps = [":gtest"],
)
# The following rules build samples of how to use gTest.
cc_library(
name = "gtest_sample_lib",
srcs = [
"googletest/samples/sample1.cc",
"googletest/samples/sample2.cc",
"googletest/samples/sample4.cc",
],
hdrs = [
"googletest/samples/prime_tables.h",
"googletest/samples/sample1.h",
"googletest/samples/sample2.h",
"googletest/samples/sample3-inl.h",
"googletest/samples/sample4.h",
],
features = select({
":windows": ["windows_export_all_symbols"],
"//conditions:default": [],
}),
)
cc_test(
name = "gtest_samples",
size = "small",
# All Samples except:
# sample9 (main)
# sample10 (main and takes a command line option and needs to be separate)
srcs = [
"googletest/samples/sample1_unittest.cc",
"googletest/samples/sample2_unittest.cc",
"googletest/samples/sample3_unittest.cc",
"googletest/samples/sample4_unittest.cc",
"googletest/samples/sample5_unittest.cc",
"googletest/samples/sample6_unittest.cc",
"googletest/samples/sample7_unittest.cc",
"googletest/samples/sample8_unittest.cc",
],
linkstatic = 0,
deps = [
"gtest_sample_lib",
":gtest_main",
],
)
cc_test(
name = "sample9_unittest",
size = "small",
srcs = ["googletest/samples/sample9_unittest.cc"],
deps = [":gtest"],
)
cc_test(
name = "sample10_unittest",
size = "small",
srcs = ["googletest/samples/sample10_unittest.cc"],
deps = [":gtest"],
)

@ -0,0 +1,36 @@
# Note: CMake support is community-based. The maintainers do not use CMake
# internally.
cmake_minimum_required(VERSION 2.8.8)
if (POLICY CMP0048)
cmake_policy(SET CMP0048 NEW)
endif (POLICY CMP0048)
project(googletest-distribution)
set(GOOGLETEST_VERSION 1.10.0)
if (CMAKE_VERSION VERSION_LESS "3.1")
add_definitions(-std=c++11)
else()
set(CMAKE_CXX_STANDARD 11)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
if(NOT CYGWIN)
set(CMAKE_CXX_EXTENSIONS OFF)
endif()
endif()
enable_testing()
include(CMakeDependentOption)
include(GNUInstallDirs)
#Note that googlemock target already builds googletest
option(BUILD_GMOCK "Builds the googlemock subproject" ON)
option(INSTALL_GTEST "Enable installation of googletest. (Projects embedding googletest may want to turn this OFF.)" ON)
if(BUILD_GMOCK)
add_subdirectory( googlemock )
else()
add_subdirectory( googletest )
endif()

@ -0,0 +1,142 @@
# How to become a contributor and submit your own code
## Contributor License Agreements
We'd love to accept your patches! Before we can take them, we have to jump a
couple of legal hurdles.
Please fill out either the individual or corporate Contributor License Agreement
(CLA).
* If you are an individual writing original source code and you're sure you
own the intellectual property, then you'll need to sign an
[individual CLA](https://developers.google.com/open-source/cla/individual).
* If you work for a company that wants to allow you to contribute your work,
then you'll need to sign a
[corporate CLA](https://developers.google.com/open-source/cla/corporate).
Follow either of the two links above to access the appropriate CLA and
instructions for how to sign and return it. Once we receive it, we'll be able to
accept your pull requests.
## Are you a Googler?
If you are a Googler, please make an attempt to submit an internal change rather
than a GitHub Pull Request. If you are not able to submit an internal change a
PR is acceptable as an alternative.
## Contributing A Patch
1. Submit an issue describing your proposed change to the
[issue tracker](https://github.com/google/googletest).
2. Please don't mix more than one logical change per submittal, because it
makes the history hard to follow. If you want to make a change that doesn't
have a corresponding issue in the issue tracker, please create one.
3. Also, coordinate with team members that are listed on the issue in question.
This ensures that work isn't being duplicated and communicating your plan
early also generally leads to better patches.
4. If your proposed change is accepted, and you haven't already done so, sign a
Contributor License Agreement (see details above).
5. Fork the desired repo, develop and test your code changes.
6. Ensure that your code adheres to the existing style in the sample to which
you are contributing.
7. Ensure that your code has an appropriate set of unit tests which all pass.
8. Submit a pull request.
## The Google Test and Google Mock Communities
The Google Test community exists primarily through the
[discussion group](http://groups.google.com/group/googletestframework) and the
GitHub repository. Likewise, the Google Mock community exists primarily through
their own [discussion group](http://groups.google.com/group/googlemock). You are
definitely encouraged to contribute to the discussion and you can also help us
to keep the effectiveness of the group high by following and promoting the
guidelines listed here.
### Please Be Friendly
Showing courtesy and respect to others is a vital part of the Google culture,
and we strongly encourage everyone participating in Google Test development to
join us in accepting nothing less. Of course, being courteous is not the same as
failing to constructively disagree with each other, but it does mean that we
should be respectful of each other when enumerating the 42 technical reasons
that a particular proposal may not be the best choice. There's never a reason to
be antagonistic or dismissive toward anyone who is sincerely trying to
contribute to a discussion.
Sure, C++ testing is serious business and all that, but it's also a lot of fun.
Let's keep it that way. Let's strive to be one of the friendliest communities in
all of open source.
As always, discuss Google Test in the official GoogleTest discussion group. You
don't have to actually submit code in order to sign up. Your participation
itself is a valuable contribution.
## Style
To keep the source consistent, readable, diffable and easy to merge, we use a
fairly rigid coding style, as defined by the
[google-styleguide](https://github.com/google/styleguide) project. All patches
will be expected to conform to the style outlined
[here](https://google.github.io/styleguide/cppguide.html). Use
[.clang-format](https://github.com/google/googletest/blob/master/.clang-format)
to check your formatting
## Requirements for Contributors
If you plan to contribute a patch, you need to build Google Test, Google Mock,
and their own tests from a git checkout, which has further requirements:
* [Python](https://www.python.org/) v2.3 or newer (for running some of the
tests and re-generating certain source files from templates)
* [CMake](https://cmake.org/) v2.6.4 or newer
## Developing Google Test and Google Mock
This section discusses how to make your own changes to the Google Test project.
### Testing Google Test and Google Mock Themselves
To make sure your changes work as intended and don't break existing
functionality, you'll want to compile and run Google Test and GoogleMock's own
tests. For that you can use CMake:
mkdir mybuild
cd mybuild
cmake -Dgtest_build_tests=ON -Dgmock_build_tests=ON ${GTEST_REPO_DIR}
To choose between building only Google Test or Google Mock, you may modify your
cmake command to be one of each
cmake -Dgtest_build_tests=ON ${GTEST_DIR} # sets up Google Test tests
cmake -Dgmock_build_tests=ON ${GMOCK_DIR} # sets up Google Mock tests
Make sure you have Python installed, as some of Google Test's tests are written
in Python. If the cmake command complains about not being able to find Python
(`Could NOT find PythonInterp (missing: PYTHON_EXECUTABLE)`), try telling it
explicitly where your Python executable can be found:
cmake -DPYTHON_EXECUTABLE=path/to/python ...
Next, you can build Google Test and / or Google Mock and all desired tests. On
\*nix, this is usually done by
make
To run the tests, do
make test
All tests should pass.
### Regenerating Source Files
Some of Google Test's source files are generated from templates (not in the C++
sense) using a script. For example, the file
include/gtest/internal/gtest-type-util.h.pump is used to generate
gtest-type-util.h in the same directory.
You don't need to worry about regenerating the source files unless you need to
modify them. You would then modify the corresponding `.pump` files and run the
'[pump.py](googletest/scripts/pump.py)' generator script. See the
[Pump Manual](googletest/docs/pump_manual.md).

@ -0,0 +1,28 @@
Copyright 2008, Google Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
* Neither the name of Google Inc. nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

@ -0,0 +1,134 @@
# Google Test
#### OSS Builds Status:
[![Build Status](https://api.travis-ci.org/google/googletest.svg?branch=master)](https://travis-ci.org/google/googletest)
[![Build status](https://ci.appveyor.com/api/projects/status/4o38plt0xbo1ubc8/branch/master?svg=true)](https://ci.appveyor.com/project/GoogleTestAppVeyor/googletest/branch/master)
### Future Plans
#### 1.8.x Release:
[the 1.8.x](https://github.com/google/googletest/releases/tag/release-1.8.1) is
the last release that works with pre-C++11 compilers. The 1.8.x will not accept
any requests for any new features and any bugfix requests will only be accepted
if proven "critical"
#### Post 1.8.x:
On-going work to improve/cleanup/pay technical debt. When this work is completed
there will be a 1.9.x tagged release
#### Post 1.9.x
Post 1.9.x googletest will follow
[Abseil Live at Head philosophy](https://abseil.io/about/philosophy)
## Welcome to **Google Test**, Google's C++ test framework!
This repository is a merger of the formerly separate GoogleTest and GoogleMock
projects. These were so closely related that it makes sense to maintain and
release them together.
Please subscribe to the mailing list at googletestframework@googlegroups.com for
questions, discussions, and development.
### Getting started:
The information for **Google Test** is available in the
[Google Test Primer](googletest/docs/primer.md) documentation.
**Google Mock** is an extension to Google Test for writing and using C++ mock
classes. See the separate [Google Mock documentation](googlemock/README.md).
More detailed documentation for googletest is in its interior
[googletest/README.md](googletest/README.md) file.
## Features
* An [xUnit](https://en.wikipedia.org/wiki/XUnit) test framework.
* Test discovery.
* A rich set of assertions.
* User-defined assertions.
* Death tests.
* Fatal and non-fatal failures.
* Value-parameterized tests.
* Type-parameterized tests.
* Various options for running the tests.
* XML test report generation.
## Platforms
Google test has been used on a variety of platforms:
* Linux
* Mac OS X
* Windows
* Cygwin
* MinGW
* Windows Mobile
* Symbian
* PlatformIO
## Who Is Using Google Test?
In addition to many internal projects at Google, Google Test is also used by the
following notable projects:
* The [Chromium projects](http://www.chromium.org/) (behind the Chrome browser
and Chrome OS).
* The [LLVM](http://llvm.org/) compiler.
* [Protocol Buffers](https://github.com/google/protobuf), Google's data
interchange format.
* The [OpenCV](http://opencv.org/) computer vision library.
* [tiny-dnn](https://github.com/tiny-dnn/tiny-dnn): header only,
dependency-free deep learning framework in C++11.
## Related Open Source Projects
[GTest Runner](https://github.com/nholthaus/gtest-runner) is a Qt5 based
automated test-runner and Graphical User Interface with powerful features for
Windows and Linux platforms.
[Google Test UI](https://github.com/ospector/gtest-gbar) is test runner that
runs your test binary, allows you to track its progress via a progress bar, and
displays a list of test failures. Clicking on one shows failure text. Google
Test UI is written in C#.
[GTest TAP Listener](https://github.com/kinow/gtest-tap-listener) is an event
listener for Google Test that implements the
[TAP protocol](https://en.wikipedia.org/wiki/Test_Anything_Protocol) for test
result output. If your test runner understands TAP, you may find it useful.
[gtest-parallel](https://github.com/google/gtest-parallel) is a test runner that
runs tests from your binary in parallel to provide significant speed-up.
[GoogleTest Adapter](https://marketplace.visualstudio.com/items?itemName=DavidSchuldenfrei.gtest-adapter)
is a VS Code extension allowing to view Google Tests in a tree view, and
run/debug your tests.
## Requirements
Google Test is designed to have fairly minimal requirements to build and use
with your projects, but there are some. If you notice any problems on your
platform, please notify
[googletestframework@googlegroups.com](https://groups.google.com/forum/#!forum/googletestframework).
Patches for fixing them are welcome!
### Build Requirements
These are the base requirements to build and use Google Test from a source
package:
* [Bazel](https://bazel.build/) or [CMake](https://cmake.org/). NOTE: Bazel is
the build system that googletest is using internally and tests against.
CMake is community-supported.
* a C++11-standard-compliant compiler
## Contributing change
Please read the [`CONTRIBUTING.md`](CONTRIBUTING.md) for details on how to
contribute to this project.
Happy testing!

@ -0,0 +1,23 @@
workspace(name = "com_google_googletest")
load("@bazel_tools//tools/build_defs/repo:http.bzl", "http_archive")
# Abseil
http_archive(
name = "com_google_absl",
urls = ["https://github.com/abseil/abseil-cpp/archive/master.zip"],
strip_prefix = "abseil-cpp-master",
)
http_archive(
name = "rules_cc",
strip_prefix = "rules_cc-master",
urls = ["https://github.com/bazelbuild/rules_cc/archive/master.zip"],
)
http_archive(
name = "rules_python",
strip_prefix = "rules_python-master",
urls = ["https://github.com/bazelbuild/rules_python/archive/master.zip"],
)

@ -0,0 +1,154 @@
version: '{build}'
os: Visual Studio 2015
environment:
matrix:
- compiler: msvc-15-seh
generator: "Visual Studio 15 2017"
build_system: cmake
APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
- compiler: msvc-15-seh
generator: "Visual Studio 15 2017 Win64"
build_system: cmake
APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
enabled_on_pr: yes
- compiler: msvc-15-seh
build_system: bazel
APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
enabled_on_pr: yes
- compiler: msvc-14-seh
build_system: cmake
generator: "Visual Studio 14 2015"
enabled_on_pr: yes
- compiler: msvc-14-seh
build_system: cmake
generator: "Visual Studio 14 2015 Win64"
- compiler: gcc-6.3.0-posix
build_system: cmake
generator: "MinGW Makefiles"
cxx_path: 'C:\mingw-w64\i686-6.3.0-posix-dwarf-rt_v5-rev1\mingw32\bin'
enabled_on_pr: yes
configuration:
- Debug
build:
verbosity: minimal
install:
- ps: |
Write-Output "Compiler: $env:compiler"
Write-Output "Generator: $env:generator"
Write-Output "Env:Configuation: $env:configuration"
Write-Output "Env: $env"
if (-not (Test-Path env:APPVEYOR_PULL_REQUEST_NUMBER)) {
Write-Output "This is *NOT* a pull request build"
} else {
Write-Output "This is a pull request build"
if (-not (Test-Path env:enabled_on_pr) -or $env:enabled_on_pr -ne "yes") {
Write-Output "PR builds are *NOT* explicitly enabled"
}
}
# install Bazel
if ($env:build_system -eq "bazel") {
appveyor DownloadFile https://github.com/bazelbuild/bazel/releases/download/0.28.1/bazel-0.28.1-windows-x86_64.exe -FileName bazel.exe
}
if ($env:build_system -eq "cmake") {
# git bash conflicts with MinGW makefiles
if ($env:generator -eq "MinGW Makefiles") {
$env:path = $env:path.replace("C:\Program Files\Git\usr\bin;", "")
if ($env:cxx_path -ne "") {
$env:path += ";$env:cxx_path"
}
}
}
before_build:
- ps: |
$env:root=$env:APPVEYOR_BUILD_FOLDER
Write-Output "env:root: $env:root"
build_script:
- ps: |
# Only enable some builds for pull requests, the AppVeyor queue is too long.
if ((Test-Path env:APPVEYOR_PULL_REQUEST_NUMBER) -And (-not (Test-Path env:enabled_on_pr) -or $env:enabled_on_pr -ne "yes")) {
return
} else {
# special case - build with Bazel
if ($env:build_system -eq "bazel") {
& $env:root\bazel.exe build -c opt //:gtest_samples
if ($LastExitCode -eq 0) { # bazel writes to StdErr and PowerShell interprets it as an error
$host.SetShouldExit(0)
} else { # a real error
throw "Exec: $ErrorMessage"
}
return
}
}
# by default build with CMake
md _build -Force | Out-Null
cd _build
$conf = if ($env:generator -eq "MinGW Makefiles") {"-DCMAKE_BUILD_TYPE=$env:configuration"} else {"-DCMAKE_CONFIGURATION_TYPES=Debug;Release"}
# Disable test for MinGW (gtest tests fail, gmock tests can not build)
$gtest_build_tests = if ($env:generator -eq "MinGW Makefiles") {"-Dgtest_build_tests=OFF"} else {"-Dgtest_build_tests=ON"}
$gmock_build_tests = if ($env:generator -eq "MinGW Makefiles") {"-Dgmock_build_tests=OFF"} else {"-Dgmock_build_tests=ON"}
& cmake -G "$env:generator" $conf -Dgtest_build_samples=ON $gtest_build_tests $gmock_build_tests ..
if ($LastExitCode -ne 0) {
throw "Exec: $ErrorMessage"
}
$cmake_parallel = if ($env:generator -eq "MinGW Makefiles") {"-j2"} else {"/m"}
& cmake --build . --config $env:configuration -- $cmake_parallel
if ($LastExitCode -ne 0) {
throw "Exec: $ErrorMessage"
}
skip_commits:
files:
- '**/*.md'
test_script:
- ps: |
# Only enable some builds for pull requests, the AppVeyor queue is too long.
if ((Test-Path env:APPVEYOR_PULL_REQUEST_NUMBER) -And (-not (Test-Path env:enabled_on_pr) -or $env:enabled_on_pr -ne "yes")) {
return
}
if ($env:build_system -eq "bazel") {
# special case - testing with Bazel
& $env:root\bazel.exe test //:gtest_samples
if ($LastExitCode -eq 0) { # bazel writes to StdErr and PowerShell interprets it as an error
$host.SetShouldExit(0)
} else { # a real error
throw "Exec: $ErrorMessage"
}
}
if ($env:build_system -eq "cmake") {
# built with CMake - test with CTest
if ($env:generator -eq "MinGW Makefiles") {
return # No test available for MinGW
}
& ctest -C $env:configuration --timeout 600 --output-on-failure
if ($LastExitCode -ne 0) {
throw "Exec: $ErrorMessage"
}
}
artifacts:
- path: '_build/CMakeFiles/*.log'
name: logs
- path: '_build/Testing/**/*.xml'
name: test_results
- path: 'bazel-testlogs/**/test.log'
name: test_logs
- path: 'bazel-testlogs/**/test.xml'
name: test_results

@ -0,0 +1,37 @@
#!/usr/bin/env bash
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
set -e
bazel version
bazel build --curses=no //...:all
bazel test --curses=no //...:all
bazel test --curses=no //...:all --define absl=1

@ -0,0 +1,2 @@
# run PlatformIO builds
platformio run

@ -0,0 +1,41 @@
#!/usr/bin/env bash
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# This file should be sourced, and not executed as a standalone script.
#
# TODO() - we can check if this is being sourced using $BASH_VERSION and $BASH_SOURCE[0] != ${0}.
if [ "${TRAVIS_OS_NAME}" = "linux" ]; then
if [ "$CXX" = "g++" ]; then export CXX="g++-4.9" CC="gcc-4.9"; fi
if [ "$CXX" = "clang++" ]; then export CXX="clang++-3.9" CC="clang-3.9"; fi
fi

@ -0,0 +1,47 @@
#!/usr/bin/env bash
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# This file should be sourced, and not executed as a standalone script.
#
# TODO() - we can check if this is being sourced using $BASH_VERSION and $BASH_SOURCE[0] != ${0}.
#
if [ "${TRAVIS_OS_NAME}" = "osx" ]; then
if [ "$CXX" = "clang++" ]; then
# $PATH needs to be adjusted because the llvm tap doesn't install the
# package to /usr/local/bin, etc, like the gcc tap does.
# See: https://github.com/Homebrew/legacy-homebrew/issues/29733
clang_version=3.9
export PATH="/usr/local/opt/llvm@${clang_version}/bin:$PATH";
fi
fi

@ -0,0 +1,48 @@
#!/usr/bin/env bash
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# This file is typically sourced by another script.
# if possible, ask for the precise number of processors,
# otherwise take 2 processors as reasonable default; see
# https://docs.travis-ci.com/user/speeding-up-the-build/#Makefile-optimization
if [ -x /usr/bin/getconf ]; then
NPROCESSORS=$(/usr/bin/getconf _NPROCESSORS_ONLN)
else
NPROCESSORS=2
fi
# as of 2017-09-04 Travis CI reports 32 processors, but GCC build
# crashes if parallelized too much (maybe memory consumption problem),
# so limit to 4 processors for the time being.
if [ $NPROCESSORS -gt 4 ] ; then
echo "$0:Note: Limiting processors to use by make from $NPROCESSORS to 4."
NPROCESSORS=4
fi

@ -0,0 +1,49 @@
#!/usr/bin/env bash
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
set -eu
if [ "${TRAVIS_OS_NAME}" != linux ]; then
echo "Not a Linux build; skipping installation"
exit 0
fi
if [ "${TRAVIS_SUDO}" = "true" ]; then
echo "deb [arch=amd64] http://storage.googleapis.com/bazel-apt stable jdk1.8" | \
sudo tee /etc/apt/sources.list.d/bazel.list
curl https://bazel.build/bazel-release.pub.gpg | sudo apt-key add -
sudo apt-get update && sudo apt-get install -y bazel gcc-4.9 g++-4.9 clang-3.9
elif [ "${CXX}" = "clang++" ]; then
# Use ccache, assuming $HOME/bin is in the path, which is true in the Travis build environment.
ln -sf /usr/bin/ccache $HOME/bin/${CXX};
ln -sf /usr/bin/ccache $HOME/bin/${CC};
fi

@ -0,0 +1,40 @@
#!/usr/bin/env bash
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
set -eu
if [ "${TRAVIS_OS_NAME}" != "osx" ]; then
echo "Not a macOS build; skipping installation"
exit 0
fi
brew update
brew install ccache gcc@4.9

@ -0,0 +1,5 @@
# install PlatformIO
sudo pip install -U platformio
# update PlatformIO
platformio update

@ -0,0 +1,51 @@
#!/usr/bin/env bash
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
set -e
# ccache on OS X needs installation first
# reset ccache statistics
ccache --zero-stats
echo PATH=${PATH}
echo "Compiler configuration:"
echo CXX=${CXX}
echo CC=${CC}
echo CXXFLAGS=${CXXFLAGS}
echo "C++ compiler version:"
${CXX} --version || echo "${CXX} does not seem to support the --version flag"
${CXX} -v || echo "${CXX} does not seem to support the -v flag"
echo "C compiler version:"
${CC} --version || echo "${CXX} does not seem to support the --version flag"
${CC} -v || echo "${CXX} does not seem to support the -v flag"

@ -0,0 +1,44 @@
#!/usr/bin/env sh
set -evx
. ci/get-nprocessors.sh
# if possible, ask for the precise number of processors,
# otherwise take 2 processors as reasonable default; see
# https://docs.travis-ci.com/user/speeding-up-the-build/#Makefile-optimization
if [ -x /usr/bin/getconf ]; then
NPROCESSORS=$(/usr/bin/getconf _NPROCESSORS_ONLN)
else
NPROCESSORS=2
fi
# as of 2017-09-04 Travis CI reports 32 processors, but GCC build
# crashes if parallelized too much (maybe memory consumption problem),
# so limit to 4 processors for the time being.
if [ $NPROCESSORS -gt 4 ] ; then
echo "$0:Note: Limiting processors to use by make from $NPROCESSORS to 4."
NPROCESSORS=4
fi
# Tell make to use the processors. No preceding '-' required.
MAKEFLAGS="j${NPROCESSORS}"
export MAKEFLAGS
env | sort
# Set default values to OFF for these variables if not specified.
: "${NO_EXCEPTION:=OFF}"
: "${NO_RTTI:=OFF}"
: "${COMPILER_IS_GNUCXX:=OFF}"
mkdir build || true
cd build
cmake -Dgtest_build_samples=ON \
-Dgtest_build_tests=ON \
-Dgmock_build_tests=ON \
-Dcxx_no_exception=$NO_EXCEPTION \
-Dcxx_no_rtti=$NO_RTTI \
-DCMAKE_COMPILER_IS_GNUCXX=$COMPILER_IS_GNUCXX \
-DCMAKE_CXX_FLAGS=$CXX_FLAGS \
-DCMAKE_BUILD_TYPE=$BUILD_TYPE \
..
make
CTEST_OUTPUT_ON_FAILURE=1 make test

@ -0,0 +1,233 @@
########################################################################
# Note: CMake support is community-based. The maintainers do not use CMake
# internally.
#
# CMake build script for Google Mock.
#
# To run the tests for Google Mock itself on Linux, use 'make test' or
# ctest. You can select which tests to run using 'ctest -R regex'.
# For more options, run 'ctest --help'.
option(gmock_build_tests "Build all of Google Mock's own tests." OFF)
# A directory to find Google Test sources.
if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/gtest/CMakeLists.txt")
set(gtest_dir gtest)
else()
set(gtest_dir ../googletest)
endif()
# Defines pre_project_set_up_hermetic_build() and set_up_hermetic_build().
include("${gtest_dir}/cmake/hermetic_build.cmake" OPTIONAL)
if (COMMAND pre_project_set_up_hermetic_build)
# Google Test also calls hermetic setup functions from add_subdirectory,
# although its changes will not affect things at the current scope.
pre_project_set_up_hermetic_build()
endif()
########################################################################
#
# Project-wide settings
# Name of the project.
#
# CMake files in this project can refer to the root source directory
# as ${gmock_SOURCE_DIR} and to the root binary directory as
# ${gmock_BINARY_DIR}.
# Language "C" is required for find_package(Threads).
if (CMAKE_VERSION VERSION_LESS 3.0)
project(gmock CXX C)
else()
cmake_policy(SET CMP0048 NEW)
project(gmock VERSION ${GOOGLETEST_VERSION} LANGUAGES CXX C)
endif()
cmake_minimum_required(VERSION 2.6.4)
if (COMMAND set_up_hermetic_build)
set_up_hermetic_build()
endif()
# Instructs CMake to process Google Test's CMakeLists.txt and add its
# targets to the current scope. We are placing Google Test's binary
# directory in a subdirectory of our own as VC compilation may break
# if they are the same (the default).
add_subdirectory("${gtest_dir}" "${gmock_BINARY_DIR}/${gtest_dir}")
# These commands only run if this is the main project
if(CMAKE_PROJECT_NAME STREQUAL "gmock" OR CMAKE_PROJECT_NAME STREQUAL "googletest-distribution")
# BUILD_SHARED_LIBS is a standard CMake variable, but we declare it here to
# make it prominent in the GUI.
option(BUILD_SHARED_LIBS "Build shared libraries (DLLs)." OFF)
else()
mark_as_advanced(gmock_build_tests)
endif()
# Although Google Test's CMakeLists.txt calls this function, the
# changes there don't affect the current scope. Therefore we have to
# call it again here.
config_compiler_and_linker() # from ${gtest_dir}/cmake/internal_utils.cmake
# Adds Google Mock's and Google Test's header directories to the search path.
set(gmock_build_include_dirs
"${gmock_SOURCE_DIR}/include"
"${gmock_SOURCE_DIR}"
"${gtest_SOURCE_DIR}/include"
# This directory is needed to build directly from Google Test sources.
"${gtest_SOURCE_DIR}")
include_directories(${gmock_build_include_dirs})
########################################################################
#
# Defines the gmock & gmock_main libraries. User tests should link
# with one of them.
# Google Mock libraries. We build them using more strict warnings than what
# are used for other targets, to ensure that Google Mock can be compiled by
# a user aggressive about warnings.
if (MSVC)
cxx_library(gmock
"${cxx_strict}"
"${gtest_dir}/src/gtest-all.cc"
src/gmock-all.cc)
cxx_library(gmock_main
"${cxx_strict}"
"${gtest_dir}/src/gtest-all.cc"
src/gmock-all.cc
src/gmock_main.cc)
else()
cxx_library(gmock "${cxx_strict}" src/gmock-all.cc)
target_link_libraries(gmock PUBLIC gtest)
cxx_library(gmock_main "${cxx_strict}" src/gmock_main.cc)
target_link_libraries(gmock_main PUBLIC gmock)
endif()
# If the CMake version supports it, attach header directory information
# to the targets for when we are part of a parent build (ie being pulled
# in via add_subdirectory() rather than being a standalone build).
if (DEFINED CMAKE_VERSION AND NOT "${CMAKE_VERSION}" VERSION_LESS "2.8.11")
target_include_directories(gmock SYSTEM INTERFACE
"$<BUILD_INTERFACE:${gmock_build_include_dirs}>"
"$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/${CMAKE_INSTALL_INCLUDEDIR}>")
target_include_directories(gmock_main SYSTEM INTERFACE
"$<BUILD_INTERFACE:${gmock_build_include_dirs}>"
"$<INSTALL_INTERFACE:$<INSTALL_PREFIX>/${CMAKE_INSTALL_INCLUDEDIR}>")
endif()
########################################################################
#
# Install rules
install_project(gmock gmock_main)
########################################################################
#
# Google Mock's own tests.
#
# You can skip this section if you aren't interested in testing
# Google Mock itself.
#
# The tests are not built by default. To build them, set the
# gmock_build_tests option to ON. You can do it by running ccmake
# or specifying the -Dgmock_build_tests=ON flag when running cmake.
if (gmock_build_tests)
# This must be set in the root directory for the tests to be run by
# 'make test' or ctest.
enable_testing()
if (WIN32)
file(GENERATE OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/$<CONFIG>/RunTest.ps1"
CONTENT
"$project_bin = \"${CMAKE_BINARY_DIR}/bin/$<CONFIG>\"
$env:Path = \"$project_bin;$env:Path\"
& $args")
elseif (MINGW OR CYGWIN)
file(GENERATE OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/RunTest.ps1"
CONTENT
"$project_bin = (cygpath --windows ${CMAKE_BINARY_DIR}/bin)
$env:Path = \"$project_bin;$env:Path\"
& $args")
endif()
if (MINGW OR CYGWIN)
if (CMAKE_VERSION VERSION_LESS "2.8.12")
add_compile_options("-Wa,-mbig-obj")
else()
add_definitions("-Wa,-mbig-obj")
endif()
endif()
############################################################
# C++ tests built with standard compiler flags.
cxx_test(gmock-actions_test gmock_main)
cxx_test(gmock-cardinalities_test gmock_main)
cxx_test(gmock_ex_test gmock_main)
cxx_test(gmock-function-mocker_test gmock_main)
cxx_test(gmock-generated-actions_test gmock_main)
cxx_test(gmock-generated-function-mockers_test gmock_main)
cxx_test(gmock-generated-matchers_test gmock_main)
cxx_test(gmock-internal-utils_test gmock_main)
cxx_test(gmock-matchers_test gmock_main)
cxx_test(gmock-more-actions_test gmock_main)
cxx_test(gmock-nice-strict_test gmock_main)
cxx_test(gmock-port_test gmock_main)
cxx_test(gmock-spec-builders_test gmock_main)
cxx_test(gmock_link_test gmock_main test/gmock_link2_test.cc)
cxx_test(gmock_test gmock_main)
if (DEFINED GTEST_HAS_PTHREAD)
cxx_test(gmock_stress_test gmock)
endif()
# gmock_all_test is commented to save time building and running tests.
# Uncomment if necessary.
# cxx_test(gmock_all_test gmock_main)
############################################################
# C++ tests built with non-standard compiler flags.
if (MSVC)
cxx_library(gmock_main_no_exception "${cxx_no_exception}"
"${gtest_dir}/src/gtest-all.cc" src/gmock-all.cc src/gmock_main.cc)
cxx_library(gmock_main_no_rtti "${cxx_no_rtti}"
"${gtest_dir}/src/gtest-all.cc" src/gmock-all.cc src/gmock_main.cc)
else()
cxx_library(gmock_main_no_exception "${cxx_no_exception}" src/gmock_main.cc)
target_link_libraries(gmock_main_no_exception PUBLIC gmock)
cxx_library(gmock_main_no_rtti "${cxx_no_rtti}" src/gmock_main.cc)
target_link_libraries(gmock_main_no_rtti PUBLIC gmock)
endif()
cxx_test_with_flags(gmock-more-actions_no_exception_test "${cxx_no_exception}"
gmock_main_no_exception test/gmock-more-actions_test.cc)
cxx_test_with_flags(gmock_no_rtti_test "${cxx_no_rtti}"
gmock_main_no_rtti test/gmock-spec-builders_test.cc)
cxx_shared_library(shared_gmock_main "${cxx_default}"
"${gtest_dir}/src/gtest-all.cc" src/gmock-all.cc src/gmock_main.cc)
# Tests that a binary can be built with Google Mock as a shared library. On
# some system configurations, it may not possible to run the binary without
# knowing more details about the system configurations. We do not try to run
# this binary. To get a more robust shared library coverage, configure with
# -DBUILD_SHARED_LIBS=ON.
cxx_executable_with_flags(shared_gmock_test_ "${cxx_default}"
shared_gmock_main test/gmock-spec-builders_test.cc)
set_target_properties(shared_gmock_test_
PROPERTIES
COMPILE_DEFINITIONS "GTEST_LINKED_AS_SHARED_LIBRARY=1")
############################################################
# Python tests.
cxx_executable(gmock_leak_test_ test gmock_main)
py_test(gmock_leak_test)
cxx_executable(gmock_output_test_ test gmock)
py_test(gmock_output_test)
endif()

@ -0,0 +1,40 @@
# This file contains a list of people who've made non-trivial
# contribution to the Google C++ Mocking Framework project. People
# who commit code to the project are encouraged to add their names
# here. Please keep the list sorted by first names.
Benoit Sigoure <tsuna@google.com>
Bogdan Piloca <boo@google.com>
Chandler Carruth <chandlerc@google.com>
Dave MacLachlan <dmaclach@gmail.com>
David Anderson <danderson@google.com>
Dean Sturtevant
Gene Volovich <gv@cite.com>
Hal Burch <gmock@hburch.com>
Jeffrey Yasskin <jyasskin@google.com>
Jim Keller <jimkeller@google.com>
Joe Walnes <joe@truemesh.com>
Jon Wray <jwray@google.com>
Keir Mierle <mierle@gmail.com>
Keith Ray <keith.ray@gmail.com>
Kostya Serebryany <kcc@google.com>
Lev Makhlis
Manuel Klimek <klimek@google.com>
Mario Tanev <radix@google.com>
Mark Paskin
Markus Heule <markus.heule@gmail.com>
Matthew Simmons <simmonmt@acm.org>
Mike Bland <mbland@google.com>
Neal Norwitz <nnorwitz@gmail.com>
Nermin Ozkiranartli <nermin@google.com>
Owen Carlsen <ocarlsen@google.com>
Paneendra Ba <paneendra@google.com>
Paul Menage <menage@google.com>
Piotr Kaminski <piotrk@google.com>
Russ Rufer <russ@pentad.com>
Sverre Sundsdal <sundsdal@gmail.com>
Takeshi Yoshino <tyoshino@google.com>
Vadim Berman <vadimb@google.com>
Vlad Losev <vladl@google.com>
Wolfgang Klier <wklier@google.com>
Zhanyong Wan <wan@google.com>

@ -0,0 +1,28 @@
Copyright 2008, Google Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
* Neither the name of Google Inc. nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

@ -0,0 +1,44 @@
# Googletest Mocking (gMock) Framework
### Overview
Google's framework for writing and using C++ mock classes. It can help you
derive better designs of your system and write better tests.
It is inspired by:
* [jMock](http://www.jmock.org/),
* [EasyMock](http://www.easymock.org/), and
* [Hamcrest](http://code.google.com/p/hamcrest/),
and designed with C++'s specifics in mind.
gMock:
- provides a declarative syntax for defining mocks,
- can define partial (hybrid) mocks, which are a cross of real and mock
objects,
- handles functions of arbitrary types and overloaded functions,
- comes with a rich set of matchers for validating function arguments,
- uses an intuitive syntax for controlling the behavior of a mock,
- does automatic verification of expectations (no record-and-replay needed),
- allows arbitrary (partial) ordering constraints on function calls to be
expressed,
- lets a user extend it by defining new matchers and actions.
- does not use exceptions, and
- is easy to learn and use.
Details and examples can be found here:
* [gMock for Dummies](docs/for_dummies.md)
* [Legacy gMock FAQ](docs/gmock_faq.md)
* [gMock Cookbook](docs/cook_book.md)
* [gMock Cheat Sheet](docs/cheat_sheet.md)
Please note that code under scripts/generator/ is from the [cppclean
project](http://code.google.com/p/cppclean/) and under the Apache
License, which is different from Google Mock's license.
Google Mock is a part of
[Google Test C++ testing framework](http://github.com/google/googletest/) and a
subject to the same requirements.

@ -0,0 +1,11 @@
prefix=${pcfiledir}/../..
libdir=${prefix}/@CMAKE_INSTALL_LIBDIR@
includedir=${prefix}/@CMAKE_INSTALL_INCLUDEDIR@
Name: gmock
Description: GoogleMock (without main() function)
Version: @PROJECT_VERSION@
URL: https://github.com/google/googletest
Requires: gtest
Libs: -L${libdir} -lgmock @CMAKE_THREAD_LIBS_INIT@
Cflags: -I${includedir} @GTEST_HAS_PTHREAD_MACRO@ @CMAKE_THREAD_LIBS_INIT@

@ -0,0 +1,11 @@
prefix=${pcfiledir}/../..
libdir=${prefix}/@CMAKE_INSTALL_LIBDIR@
includedir=${prefix}/@CMAKE_INSTALL_INCLUDEDIR@
Name: gmock_main
Description: GoogleMock (with main() function)
Version: @PROJECT_VERSION@
URL: https://github.com/google/googletest
Requires: gmock
Libs: -L${libdir} -lgmock_main @CMAKE_THREAD_LIBS_INIT@
Cflags: -I${includedir} @GTEST_HAS_PTHREAD_MACRO@ @CMAKE_THREAD_LIBS_INIT@

@ -0,0 +1,781 @@
## gMock Cheat Sheet
<!-- GOOGLETEST_CM0019 DO NOT DELETE -->
<!-- GOOGLETEST_CM0033 DO NOT DELETE -->
### Defining a Mock Class
#### Mocking a Normal Class {#MockClass}
Given
```cpp
class Foo {
...
virtual ~Foo();
virtual int GetSize() const = 0;
virtual string Describe(const char* name) = 0;
virtual string Describe(int type) = 0;
virtual bool Process(Bar elem, int count) = 0;
};
```
(note that `~Foo()` **must** be virtual) we can define its mock as
```cpp
#include "gmock/gmock.h"
class MockFoo : public Foo {
...
MOCK_METHOD(int, GetSize, (), (const, override));
MOCK_METHOD(string, Describe, (const char* name), (override));
MOCK_METHOD(string, Describe, (int type), (override));
MOCK_METHOD(bool, Process, (Bar elem, int count), (override));
};
```
To create a "nice" mock, which ignores all uninteresting calls, a "naggy" mock,
which warns on all uninteresting calls, or a "strict" mock, which treats them as
failures:
```cpp
using ::testing::NiceMock;
using ::testing::NaggyMock;
using ::testing::StrictMock;
NiceMock<MockFoo> nice_foo; // The type is a subclass of MockFoo.
NaggyMock<MockFoo> naggy_foo; // The type is a subclass of MockFoo.
StrictMock<MockFoo> strict_foo; // The type is a subclass of MockFoo.
```
**Note:** A mock object is currently naggy by default. We may make it nice by
default in the future.
#### Mocking a Class Template {#MockTemplate}
Class templates can be mocked just like any class.
To mock
```cpp
template <typename Elem>
class StackInterface {
...
virtual ~StackInterface();
virtual int GetSize() const = 0;
virtual void Push(const Elem& x) = 0;
};
```
(note that all member functions that are mocked, including `~StackInterface()`
**must** be virtual).
```cpp
template <typename Elem>
class MockStack : public StackInterface<Elem> {
...
MOCK_METHOD(int, GetSize, (), (const, override));
MOCK_METHOD(void, Push, (const Elem& x), (override));
};
```
#### Specifying Calling Conventions for Mock Functions
If your mock function doesn't use the default calling convention, you can
specify it by adding `Calltype(convention)` to `MOCK_METHOD`'s 4th parameter.
For example,
```cpp
MOCK_METHOD(bool, Foo, (int n), (Calltype(STDMETHODCALLTYPE)));
MOCK_METHOD(int, Bar, (double x, double y),
(const, Calltype(STDMETHODCALLTYPE)));
```
where `STDMETHODCALLTYPE` is defined by `<objbase.h>` on Windows.
### Using Mocks in Tests {#UsingMocks}
The typical work flow is:
1. Import the gMock names you need to use. All gMock symbols are in the
`testing` namespace unless they are macros or otherwise noted.
2. Create the mock objects.
3. Optionally, set the default actions of the mock objects.
4. Set your expectations on the mock objects (How will they be called? What
will they do?).
5. Exercise code that uses the mock objects; if necessary, check the result
using googletest assertions.
6. When a mock object is destructed, gMock automatically verifies that all
expectations on it have been satisfied.
Here's an example:
```cpp
using ::testing::Return; // #1
TEST(BarTest, DoesThis) {
MockFoo foo; // #2
ON_CALL(foo, GetSize()) // #3
.WillByDefault(Return(1));
// ... other default actions ...
EXPECT_CALL(foo, Describe(5)) // #4
.Times(3)
.WillRepeatedly(Return("Category 5"));
// ... other expectations ...
EXPECT_EQ("good", MyProductionFunction(&foo)); // #5
} // #6
```
### Setting Default Actions {#OnCall}
gMock has a **built-in default action** for any function that returns `void`,
`bool`, a numeric value, or a pointer. In C++11, it will additionally returns
the default-constructed value, if one exists for the given type.
To customize the default action for functions with return type *`T`*:
```cpp
using ::testing::DefaultValue;
// Sets the default value to be returned. T must be CopyConstructible.
DefaultValue<T>::Set(value);
// Sets a factory. Will be invoked on demand. T must be MoveConstructible.
// T MakeT();
DefaultValue<T>::SetFactory(&MakeT);
// ... use the mocks ...
// Resets the default value.
DefaultValue<T>::Clear();
```
Example usage:
```cpp
// Sets the default action for return type std::unique_ptr<Buzz> to
// creating a new Buzz every time.
DefaultValue<std::unique_ptr<Buzz>>::SetFactory(
[] { return MakeUnique<Buzz>(AccessLevel::kInternal); });
// When this fires, the default action of MakeBuzz() will run, which
// will return a new Buzz object.
EXPECT_CALL(mock_buzzer_, MakeBuzz("hello")).Times(AnyNumber());
auto buzz1 = mock_buzzer_.MakeBuzz("hello");
auto buzz2 = mock_buzzer_.MakeBuzz("hello");
EXPECT_NE(nullptr, buzz1);
EXPECT_NE(nullptr, buzz2);
EXPECT_NE(buzz1, buzz2);
// Resets the default action for return type std::unique_ptr<Buzz>,
// to avoid interfere with other tests.
DefaultValue<std::unique_ptr<Buzz>>::Clear();
```
To customize the default action for a particular method of a specific mock
object, use `ON_CALL()`. `ON_CALL()` has a similar syntax to `EXPECT_CALL()`,
but it is used for setting default behaviors (when you do not require that the
mock method is called). See [here](cook_book.md#UseOnCall) for a more detailed
discussion.
```cpp
ON_CALL(mock-object, method(matchers))
.With(multi-argument-matcher) ?
.WillByDefault(action);
```
### Setting Expectations {#ExpectCall}
`EXPECT_CALL()` sets **expectations** on a mock method (How will it be called?
What will it do?):
```cpp
EXPECT_CALL(mock-object, method (matchers)?)
.With(multi-argument-matcher) ?
.Times(cardinality) ?
.InSequence(sequences) *
.After(expectations) *
.WillOnce(action) *
.WillRepeatedly(action) ?
.RetiresOnSaturation(); ?
```
For each item above, `?` means it can be used at most once, while `*` means it
can be used any number of times.
In order to pass, `EXPECT_CALL` must be used before the calls are actually made.
The `(matchers)` is a comma-separated list of matchers that correspond to each
of the arguments of `method`, and sets the expectation only for calls of
`method` that matches all of the matchers.
If `(matchers)` is omitted, the expectation is the same as if the matchers were
set to anything matchers (for example, `(_, _, _, _)` for a four-arg method).
If `Times()` is omitted, the cardinality is assumed to be:
* `Times(1)` when there is neither `WillOnce()` nor `WillRepeatedly()`;
* `Times(n)` when there are `n` `WillOnce()`s but no `WillRepeatedly()`, where
`n` >= 1; or
* `Times(AtLeast(n))` when there are `n` `WillOnce()`s and a
`WillRepeatedly()`, where `n` >= 0.
A method with no `EXPECT_CALL()` is free to be invoked *any number of times*,
and the default action will be taken each time.
### Matchers {#MatcherList}
<!-- GOOGLETEST_CM0020 DO NOT DELETE -->
A **matcher** matches a *single* argument. You can use it inside `ON_CALL()` or
`EXPECT_CALL()`, or use it to validate a value directly using two macros:
<!-- mdformat off(github rendering does not support multiline tables) -->
| Macro | Description |
| :----------------------------------- | :------------------------------------ |
| `EXPECT_THAT(actual_value, matcher)` | Asserts that `actual_value` matches `matcher`. |
| `ASSERT_THAT(actual_value, matcher)` | The same as `EXPECT_THAT(actual_value, matcher)`, except that it generates a **fatal** failure. |
<!-- mdformat on -->
Built-in matchers (where `argument` is the function argument, e.g.
`actual_value` in the example above, or when used in the context of
`EXPECT_CALL(mock_object, method(matchers))`, the arguments of `method`) are
divided into several categories:
#### Wildcard
Matcher | Description
:-------------------------- | :-----------------------------------------------
`_` | `argument` can be any value of the correct type.
`A<type>()` or `An<type>()` | `argument` can be any value of type `type`.
#### Generic Comparison
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :--------------------- | :-------------------------------------------------- |
| `Eq(value)` or `value` | `argument == value` |
| `Ge(value)` | `argument >= value` |
| `Gt(value)` | `argument > value` |
| `Le(value)` | `argument <= value` |
| `Lt(value)` | `argument < value` |
| `Ne(value)` | `argument != value` |
| `IsFalse()` | `argument` evaluates to `false` in a Boolean context. |
| `IsTrue()` | `argument` evaluates to `true` in a Boolean context. |
| `IsNull()` | `argument` is a `NULL` pointer (raw or smart). |
| `NotNull()` | `argument` is a non-null pointer (raw or smart). |
| `Optional(m)` | `argument` is `optional<>` that contains a value matching `m`. |
| `VariantWith<T>(m)` | `argument` is `variant<>` that holds the alternative of type T with a value matching `m`. |
| `Ref(variable)` | `argument` is a reference to `variable`. |
| `TypedEq<type>(value)` | `argument` has type `type` and is equal to `value`. You may need to use this instead of `Eq(value)` when the mock function is overloaded. |
<!-- mdformat on -->
Except `Ref()`, these matchers make a *copy* of `value` in case it's modified or
destructed later. If the compiler complains that `value` doesn't have a public
copy constructor, try wrap it in `ByRef()`, e.g.
`Eq(ByRef(non_copyable_value))`. If you do that, make sure `non_copyable_value`
is not changed afterwards, or the meaning of your matcher will be changed.
#### Floating-Point Matchers {#FpMatchers}
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :------------------------------- | :--------------------------------- |
| `DoubleEq(a_double)` | `argument` is a `double` value approximately equal to `a_double`, treating two NaNs as unequal. |
| `FloatEq(a_float)` | `argument` is a `float` value approximately equal to `a_float`, treating two NaNs as unequal. |
| `NanSensitiveDoubleEq(a_double)` | `argument` is a `double` value approximately equal to `a_double`, treating two NaNs as equal. |
| `NanSensitiveFloatEq(a_float)` | `argument` is a `float` value approximately equal to `a_float`, treating two NaNs as equal. |
<!-- mdformat on -->
The above matchers use ULP-based comparison (the same as used in googletest).
They automatically pick a reasonable error bound based on the absolute value of
the expected value. `DoubleEq()` and `FloatEq()` conform to the IEEE standard,
which requires comparing two NaNs for equality to return false. The
`NanSensitive*` version instead treats two NaNs as equal, which is often what a
user wants.
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :------------------------------------------------ | :----------------------- |
| `DoubleNear(a_double, max_abs_error)` | `argument` is a `double` value close to `a_double` (absolute error <= `max_abs_error`), treating two NaNs as unequal. |
| `FloatNear(a_float, max_abs_error)` | `argument` is a `float` value close to `a_float` (absolute error <= `max_abs_error`), treating two NaNs as unequal. |
| `NanSensitiveDoubleNear(a_double, max_abs_error)` | `argument` is a `double` value close to `a_double` (absolute error <= `max_abs_error`), treating two NaNs as equal. |
| `NanSensitiveFloatNear(a_float, max_abs_error)` | `argument` is a `float` value close to `a_float` (absolute error <= `max_abs_error`), treating two NaNs as equal. |
<!-- mdformat on -->
#### String Matchers
The `argument` can be either a C string or a C++ string object:
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :---------------------- | :------------------------------------------------- |
| `ContainsRegex(string)` | `argument` matches the given regular expression. |
| `EndsWith(suffix)` | `argument` ends with string `suffix`. |
| `HasSubstr(string)` | `argument` contains `string` as a sub-string. |
| `MatchesRegex(string)` | `argument` matches the given regular expression with the match starting at the first character and ending at the last character. |
| `StartsWith(prefix)` | `argument` starts with string `prefix`. |
| `StrCaseEq(string)` | `argument` is equal to `string`, ignoring case. |
| `StrCaseNe(string)` | `argument` is not equal to `string`, ignoring case. |
| `StrEq(string)` | `argument` is equal to `string`. |
| `StrNe(string)` | `argument` is not equal to `string`. |
<!-- mdformat on -->
`ContainsRegex()` and `MatchesRegex()` take ownership of the `RE` object. They
use the regular expression syntax defined
[here](../../googletest/docs/advanced.md#regular-expression-syntax).
`StrCaseEq()`, `StrCaseNe()`, `StrEq()`, and `StrNe()` work for wide strings as
well.
#### Container Matchers
Most STL-style containers support `==`, so you can use `Eq(expected_container)`
or simply `expected_container` to match a container exactly. If you want to
write the elements in-line, match them more flexibly, or get more informative
messages, you can use:
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :---------------------------------------- | :------------------------------- |
| `BeginEndDistanceIs(m)` | `argument` is a container whose `begin()` and `end()` iterators are separated by a number of increments matching `m`. E.g. `BeginEndDistanceIs(2)` or `BeginEndDistanceIs(Lt(2))`. For containers that define a `size()` method, `SizeIs(m)` may be more efficient. |
| `ContainerEq(container)` | The same as `Eq(container)` except that the failure message also includes which elements are in one container but not the other. |
| `Contains(e)` | `argument` contains an element that matches `e`, which can be either a value or a matcher. |
| `Each(e)` | `argument` is a container where *every* element matches `e`, which can be either a value or a matcher. |
| `ElementsAre(e0, e1, ..., en)` | `argument` has `n + 1` elements, where the *i*-th element matches `ei`, which can be a value or a matcher. |
| `ElementsAreArray({e0, e1, ..., en})`, `ElementsAreArray(a_container)`, `ElementsAreArray(begin, end)`, `ElementsAreArray(array)`, or `ElementsAreArray(array, count)` | The same as `ElementsAre()` except that the expected element values/matchers come from an initializer list, STL-style container, iterator range, or C-style array. |
| `IsEmpty()` | `argument` is an empty container (`container.empty()`). |
| `IsSubsetOf({e0, e1, ..., en})`, `IsSubsetOf(a_container)`, `IsSubsetOf(begin, end)`, `IsSubsetOf(array)`, or `IsSubsetOf(array, count)` | `argument` matches `UnorderedElementsAre(x0, x1, ..., xk)` for some subset `{x0, x1, ..., xk}` of the expected matchers. |
| `IsSupersetOf({e0, e1, ..., en})`, `IsSupersetOf(a_container)`, `IsSupersetOf(begin, end)`, `IsSupersetOf(array)`, or `IsSupersetOf(array, count)` | Some subset of `argument` matches `UnorderedElementsAre(`expected matchers`)`. |
| `Pointwise(m, container)`, `Pointwise(m, {e0, e1, ..., en})` | `argument` contains the same number of elements as in `container`, and for all i, (the i-th element in `argument`, the i-th element in `container`) match `m`, which is a matcher on 2-tuples. E.g. `Pointwise(Le(), upper_bounds)` verifies that each element in `argument` doesn't exceed the corresponding element in `upper_bounds`. See more detail below. |
| `SizeIs(m)` | `argument` is a container whose size matches `m`. E.g. `SizeIs(2)` or `SizeIs(Lt(2))`. |
| `UnorderedElementsAre(e0, e1, ..., en)` | `argument` has `n + 1` elements, and under *some* permutation of the elements, each element matches an `ei` (for a different `i`), which can be a value or a matcher. |
| `UnorderedElementsAreArray({e0, e1, ..., en})`, `UnorderedElementsAreArray(a_container)`, `UnorderedElementsAreArray(begin, end)`, `UnorderedElementsAreArray(array)`, or `UnorderedElementsAreArray(array, count)` | The same as `UnorderedElementsAre()` except that the expected element values/matchers come from an initializer list, STL-style container, iterator range, or C-style array. |
| `UnorderedPointwise(m, container)`, `UnorderedPointwise(m, {e0, e1, ..., en})` | Like `Pointwise(m, container)`, but ignores the order of elements. |
| `WhenSorted(m)` | When `argument` is sorted using the `<` operator, it matches container matcher `m`. E.g. `WhenSorted(ElementsAre(1, 2, 3))` verifies that `argument` contains elements 1, 2, and 3, ignoring order. |
| `WhenSortedBy(comparator, m)` | The same as `WhenSorted(m)`, except that the given comparator instead of `<` is used to sort `argument`. E.g. `WhenSortedBy(std::greater(), ElementsAre(3, 2, 1))`. |
<!-- mdformat on -->
**Notes:**
* These matchers can also match:
1. a native array passed by reference (e.g. in `Foo(const int (&a)[5])`),
and
2. an array passed as a pointer and a count (e.g. in `Bar(const T* buffer,
int len)` -- see [Multi-argument Matchers](#MultiArgMatchers)).
* The array being matched may be multi-dimensional (i.e. its elements can be
arrays).
* `m` in `Pointwise(m, ...)` should be a matcher for `::std::tuple<T, U>`
where `T` and `U` are the element type of the actual container and the
expected container, respectively. For example, to compare two `Foo`
containers where `Foo` doesn't support `operator==`, one might write:
```cpp
using ::std::get;
MATCHER(FooEq, "") {
return std::get<0>(arg).Equals(std::get<1>(arg));
}
...
EXPECT_THAT(actual_foos, Pointwise(FooEq(), expected_foos));
```
#### Member Matchers
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :------------------------------ | :----------------------------------------- |
| `Field(&class::field, m)` | `argument.field` (or `argument->field` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_. |
| `Key(e)` | `argument.first` matches `e`, which can be either a value or a matcher. E.g. `Contains(Key(Le(5)))` can verify that a `map` contains a key `<= 5`. |
| `Pair(m1, m2)` | `argument` is an `std::pair` whose `first` field matches `m1` and `second` field matches `m2`. |
| `Property(&class::property, m)` | `argument.property()` (or `argument->property()` when `argument` is a plain pointer) matches matcher `m`, where `argument` is an object of type _class_. |
<!-- mdformat on -->
#### Matching the Result of a Function, Functor, or Callback
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :--------------- | :------------------------------------------------ |
| `ResultOf(f, m)` | `f(argument)` matches matcher `m`, where `f` is a function or functor. |
<!-- mdformat on -->
#### Pointer Matchers
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :------------------------ | :---------------------------------------------- |
| `Pointee(m)` | `argument` (either a smart pointer or a raw pointer) points to a value that matches matcher `m`. |
| `WhenDynamicCastTo<T>(m)` | when `argument` is passed through `dynamic_cast<T>()`, it matches matcher `m`. |
<!-- mdformat on -->
<!-- GOOGLETEST_CM0026 DO NOT DELETE -->
<!-- GOOGLETEST_CM0027 DO NOT DELETE -->
#### Multi-argument Matchers {#MultiArgMatchers}
Technically, all matchers match a *single* value. A "multi-argument" matcher is
just one that matches a *tuple*. The following matchers can be used to match a
tuple `(x, y)`:
Matcher | Description
:------ | :----------
`Eq()` | `x == y`
`Ge()` | `x >= y`
`Gt()` | `x > y`
`Le()` | `x <= y`
`Lt()` | `x < y`
`Ne()` | `x != y`
You can use the following selectors to pick a subset of the arguments (or
reorder them) to participate in the matching:
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :------------------------- | :---------------------------------------------- |
| `AllArgs(m)` | Equivalent to `m`. Useful as syntactic sugar in `.With(AllArgs(m))`. |
| `Args<N1, N2, ..., Nk>(m)` | The tuple of the `k` selected (using 0-based indices) arguments matches `m`, e.g. `Args<1, 2>(Eq())`. |
<!-- mdformat on -->
#### Composite Matchers
You can make a matcher from one or more other matchers:
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :------------------------------- | :-------------------------------------- |
| `AllOf(m1, m2, ..., mn)` | `argument` matches all of the matchers `m1` to `mn`. |
| `AllOfArray({m0, m1, ..., mn})`, `AllOfArray(a_container)`, `AllOfArray(begin, end)`, `AllOfArray(array)`, or `AllOfArray(array, count)` | The same as `AllOf()` except that the matchers come from an initializer list, STL-style container, iterator range, or C-style array. |
| `AnyOf(m1, m2, ..., mn)` | `argument` matches at least one of the matchers `m1` to `mn`. |
| `AnyOfArray({m0, m1, ..., mn})`, `AnyOfArray(a_container)`, `AnyOfArray(begin, end)`, `AnyOfArray(array)`, or `AnyOfArray(array, count)` | The same as `AnyOf()` except that the matchers come from an initializer list, STL-style container, iterator range, or C-style array. |
| `Not(m)` | `argument` doesn't match matcher `m`. |
<!-- mdformat on -->
<!-- GOOGLETEST_CM0028 DO NOT DELETE -->
#### Adapters for Matchers
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :---------------------- | :------------------------------------ |
| `MatcherCast<T>(m)` | casts matcher `m` to type `Matcher<T>`. |
| `SafeMatcherCast<T>(m)` | [safely casts](cook_book.md#casting-matchers) matcher `m` to type `Matcher<T>`. |
| `Truly(predicate)` | `predicate(argument)` returns something considered by C++ to be true, where `predicate` is a function or functor. |
<!-- mdformat on -->
`AddressSatisfies(callback)` and `Truly(callback)` take ownership of `callback`,
which must be a permanent callback.
#### Using Matchers as Predicates {#MatchersAsPredicatesCheat}
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :---------------------------- | :------------------------------------------ |
| `Matches(m)(value)` | evaluates to `true` if `value` matches `m`. You can use `Matches(m)` alone as a unary functor. |
| `ExplainMatchResult(m, value, result_listener)` | evaluates to `true` if `value` matches `m`, explaining the result to `result_listener`. |
| `Value(value, m)` | evaluates to `true` if `value` matches `m`. |
<!-- mdformat on -->
#### Defining Matchers
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :----------------------------------- | :------------------------------------ |
| `MATCHER(IsEven, "") { return (arg % 2) == 0; }` | Defines a matcher `IsEven()` to match an even number. |
| `MATCHER_P(IsDivisibleBy, n, "") { *result_listener << "where the remainder is " << (arg % n); return (arg % n) == 0; }` | Defines a macher `IsDivisibleBy(n)` to match a number divisible by `n`. |
| `MATCHER_P2(IsBetween, a, b, std::string(negation ? "isn't" : "is") + " between " + PrintToString(a) + " and " + PrintToString(b)) { return a <= arg && arg <= b; }` | Defines a matcher `IsBetween(a, b)` to match a value in the range [`a`, `b`]. |
<!-- mdformat on -->
**Notes:**
1. The `MATCHER*` macros cannot be used inside a function or class.
2. The matcher body must be *purely functional* (i.e. it cannot have any side
effect, and the result must not depend on anything other than the value
being matched and the matcher parameters).
3. You can use `PrintToString(x)` to convert a value `x` of any type to a
string.
### Actions {#ActionList}
**Actions** specify what a mock function should do when invoked.
#### Returning a Value
<!-- mdformat off(no multiline tables) -->
| | |
| :-------------------------- | :-------------------------------------------- |
| `Return()` | Return from a `void` mock function. |
| `Return(value)` | Return `value`. If the type of `value` is different to the mock function's return type, `value` is converted to the latter type <i>at the time the expectation is set</i>, not when the action is executed. |
| `ReturnArg<N>()` | Return the `N`-th (0-based) argument. |
| `ReturnNew<T>(a1, ..., ak)` | Return `new T(a1, ..., ak)`; a different object is created each time. |
| `ReturnNull()` | Return a null pointer. |
| `ReturnPointee(ptr)` | Return the value pointed to by `ptr`. |
| `ReturnRef(variable)` | Return a reference to `variable`. |
| `ReturnRefOfCopy(value)` | Return a reference to a copy of `value`; the copy lives as long as the action. |
<!-- mdformat on -->
#### Side Effects
<!-- mdformat off(no multiline tables) -->
| | |
| :--------------------------------- | :-------------------------------------- |
| `Assign(&variable, value)` | Assign `value` to variable. |
| `DeleteArg<N>()` | Delete the `N`-th (0-based) argument, which must be a pointer. |
| `SaveArg<N>(pointer)` | Save the `N`-th (0-based) argument to `*pointer`. |
| `SaveArgPointee<N>(pointer)` | Save the value pointed to by the `N`-th (0-based) argument to `*pointer`. |
| `SetArgReferee<N>(value)` | Assign value to the variable referenced by the `N`-th (0-based) argument. |
| `SetArgPointee<N>(value)` | Assign `value` to the variable pointed by the `N`-th (0-based) argument. |
| `SetArgumentPointee<N>(value)` | Same as `SetArgPointee<N>(value)`. Deprecated. Will be removed in v1.7.0. |
| `SetArrayArgument<N>(first, last)` | Copies the elements in source range [`first`, `last`) to the array pointed to by the `N`-th (0-based) argument, which can be either a pointer or an iterator. The action does not take ownership of the elements in the source range. |
| `SetErrnoAndReturn(error, value)` | Set `errno` to `error` and return `value`. |
| `Throw(exception)` | Throws the given exception, which can be any copyable value. Available since v1.1.0. |
<!-- mdformat on -->
#### Using a Function, Functor, or Lambda as an Action
In the following, by "callable" we mean a free function, `std::function`,
functor, or lambda.
<!-- mdformat off(no multiline tables) -->
| | |
| :---------------------------------- | :------------------------------------- |
| `f` | Invoke f with the arguments passed to the mock function, where f is a callable. |
| `Invoke(f)` | Invoke `f` with the arguments passed to the mock function, where `f` can be a global/static function or a functor. |
| `Invoke(object_pointer, &class::method)` | Invoke the method on the object with the arguments passed to the mock function. |
| `InvokeWithoutArgs(f)` | Invoke `f`, which can be a global/static function or a functor. `f` must take no arguments. |
| `InvokeWithoutArgs(object_pointer, &class::method)` | Invoke the method on the object, which takes no arguments. |
| `InvokeArgument<N>(arg1, arg2, ..., argk)` | Invoke the mock function's `N`-th (0-based) argument, which must be a function or a functor, with the `k` arguments. |
<!-- mdformat on -->
The return value of the invoked function is used as the return value of the
action.
When defining a callable to be used with `Invoke*()`, you can declare any unused
parameters as `Unused`:
```cpp
using ::testing::Invoke;
double Distance(Unused, double x, double y) { return sqrt(x*x + y*y); }
...
EXPECT_CALL(mock, Foo("Hi", _, _)).WillOnce(Invoke(Distance));
```
`Invoke(callback)` and `InvokeWithoutArgs(callback)` take ownership of
`callback`, which must be permanent. The type of `callback` must be a base
callback type instead of a derived one, e.g.
```cpp
BlockingClosure* done = new BlockingClosure;
... Invoke(done) ...; // This won't compile!
Closure* done2 = new BlockingClosure;
... Invoke(done2) ...; // This works.
```
In `InvokeArgument<N>(...)`, if an argument needs to be passed by reference,
wrap it inside `ByRef()`. For example,
```cpp
using ::testing::ByRef;
using ::testing::InvokeArgument;
...
InvokeArgument<2>(5, string("Hi"), ByRef(foo))
```
calls the mock function's #2 argument, passing to it `5` and `string("Hi")` by
value, and `foo` by reference.
#### Default Action
<!-- mdformat off(no multiline tables) -->
| Matcher | Description |
| :------------ | :----------------------------------------------------- |
| `DoDefault()` | Do the default action (specified by `ON_CALL()` or the built-in one). |
<!-- mdformat on -->
**Note:** due to technical reasons, `DoDefault()` cannot be used inside a
composite action - trying to do so will result in a run-time error.
<!-- GOOGLETEST_CM0032 DO NOT DELETE -->
#### Composite Actions
<!-- mdformat off(no multiline tables) -->
| | |
| :----------------------------- | :------------------------------------------ |
| `DoAll(a1, a2, ..., an)` | Do all actions `a1` to `an` and return the result of `an` in each invocation. The first `n - 1` sub-actions must return void. |
| `IgnoreResult(a)` | Perform action `a` and ignore its result. `a` must not return void. |
| `WithArg<N>(a)` | Pass the `N`-th (0-based) argument of the mock function to action `a` and perform it. |
| `WithArgs<N1, N2, ..., Nk>(a)` | Pass the selected (0-based) arguments of the mock function to action `a` and perform it. |
| `WithoutArgs(a)` | Perform action `a` without any arguments. |
<!-- mdformat on -->
#### Defining Actions
<table border="1" cellspacing="0" cellpadding="1">
<tr>
<td>`struct SumAction {` <br>
&emsp;`template <typename T>` <br>
&emsp;`T operator()(T x, Ty) { return x + y; }` <br>
`};`
</td>
<td> Defines a generic functor that can be used as an action summing its
arguments. </td> </tr>
<tr>
</tr>
</table>
<!-- mdformat off(no multiline tables) -->
| | |
| :--------------------------------- | :-------------------------------------- |
| `ACTION(Sum) { return arg0 + arg1; }` | Defines an action `Sum()` to return the sum of the mock function's argument #0 and #1. |
| `ACTION_P(Plus, n) { return arg0 + n; }` | Defines an action `Plus(n)` to return the sum of the mock function's argument #0 and `n`. |
| `ACTION_Pk(Foo, p1, ..., pk) { statements; }` | Defines a parameterized action `Foo(p1, ..., pk)` to execute the given `statements`. |
<!-- mdformat on -->
The `ACTION*` macros cannot be used inside a function or class.
### Cardinalities {#CardinalityList}
These are used in `Times()` to specify how many times a mock function will be
called:
<!-- mdformat off(no multiline tables) -->
| | |
| :---------------- | :----------------------------------------------------- |
| `AnyNumber()` | The function can be called any number of times. |
| `AtLeast(n)` | The call is expected at least `n` times. |
| `AtMost(n)` | The call is expected at most `n` times. |
| `Between(m, n)` | The call is expected between `m` and `n` (inclusive) times. |
| `Exactly(n) or n` | The call is expected exactly `n` times. In particular, the call should never happen when `n` is 0. |
<!-- mdformat on -->
### Expectation Order
By default, the expectations can be matched in *any* order. If some or all
expectations must be matched in a given order, there are two ways to specify it.
They can be used either independently or together.
#### The After Clause {#AfterClause}
```cpp
using ::testing::Expectation;
...
Expectation init_x = EXPECT_CALL(foo, InitX());
Expectation init_y = EXPECT_CALL(foo, InitY());
EXPECT_CALL(foo, Bar())
.After(init_x, init_y);
```
says that `Bar()` can be called only after both `InitX()` and `InitY()` have
been called.
If you don't know how many pre-requisites an expectation has when you write it,
you can use an `ExpectationSet` to collect them:
```cpp
using ::testing::ExpectationSet;
...
ExpectationSet all_inits;
for (int i = 0; i < element_count; i++) {
all_inits += EXPECT_CALL(foo, InitElement(i));
}
EXPECT_CALL(foo, Bar())
.After(all_inits);
```
says that `Bar()` can be called only after all elements have been initialized
(but we don't care about which elements get initialized before the others).
Modifying an `ExpectationSet` after using it in an `.After()` doesn't affect the
meaning of the `.After()`.
#### Sequences {#UsingSequences}
When you have a long chain of sequential expectations, it's easier to specify
the order using **sequences**, which don't require you to given each expectation
in the chain a different name. *All expected calls* in the same sequence must
occur in the order they are specified.
```cpp
using ::testing::Return;
using ::testing::Sequence;
Sequence s1, s2;
...
EXPECT_CALL(foo, Reset())
.InSequence(s1, s2)
.WillOnce(Return(true));
EXPECT_CALL(foo, GetSize())
.InSequence(s1)
.WillOnce(Return(1));
EXPECT_CALL(foo, Describe(A<const char*>()))
.InSequence(s2)
.WillOnce(Return("dummy"));
```
says that `Reset()` must be called before *both* `GetSize()` *and* `Describe()`,
and the latter two can occur in any order.
To put many expectations in a sequence conveniently:
```cpp
using ::testing::InSequence;
{
InSequence seq;
EXPECT_CALL(...)...;
EXPECT_CALL(...)...;
...
EXPECT_CALL(...)...;
}
```
says that all expected calls in the scope of `seq` must occur in strict order.
The name `seq` is irrelevant.
### Verifying and Resetting a Mock
gMock will verify the expectations on a mock object when it is destructed, or
you can do it earlier:
```cpp
using ::testing::Mock;
...
// Verifies and removes the expectations on mock_obj;
// returns true if and only if successful.
Mock::VerifyAndClearExpectations(&mock_obj);
...
// Verifies and removes the expectations on mock_obj;
// also removes the default actions set by ON_CALL();
// returns true if and only if successful.
Mock::VerifyAndClear(&mock_obj);
```
You can also tell gMock that a mock object can be leaked and doesn't need to be
verified:
```cpp
Mock::AllowLeak(&mock_obj);
```
### Mock Classes
gMock defines a convenient mock class template
```cpp
class MockFunction<R(A1, ..., An)> {
public:
MOCK_METHOD(R, Call, (A1, ..., An));
};
```
See this [recipe](cook_book.md#using-check-points) for one application of it.
### Flags
<!-- mdformat off(no multiline tables) -->
| Flag | Description |
| :----------------------------- | :---------------------------------------- |
| `--gmock_catch_leaked_mocks=0` | Don't report leaked mock objects as failures. |
| `--gmock_verbose=LEVEL` | Sets the default verbosity level (`info`, `warning`, or `error`) of Google Mock messages. |
<!-- mdformat on -->

File diff suppressed because it is too large Load Diff

@ -0,0 +1,700 @@
## gMock for Dummies {#GMockForDummies}
<!-- GOOGLETEST_CM0013 DO NOT DELETE -->
### What Is gMock?
When you write a prototype or test, often it's not feasible or wise to rely on
real objects entirely. A **mock object** implements the same interface as a real
object (so it can be used as one), but lets you specify at run time how it will
be used and what it should do (which methods will be called? in which order? how
many times? with what arguments? what will they return? etc).
**Note:** It is easy to confuse the term *fake objects* with mock objects. Fakes
and mocks actually mean very different things in the Test-Driven Development
(TDD) community:
* **Fake** objects have working implementations, but usually take some
shortcut (perhaps to make the operations less expensive), which makes them
not suitable for production. An in-memory file system would be an example of
a fake.
* **Mocks** are objects pre-programmed with *expectations*, which form a
specification of the calls they are expected to receive.
If all this seems too abstract for you, don't worry - the most important thing
to remember is that a mock allows you to check the *interaction* between itself
and code that uses it. The difference between fakes and mocks shall become much
clearer once you start to use mocks.
**gMock** is a library (sometimes we also call it a "framework" to make it sound
cool) for creating mock classes and using them. It does to C++ what
jMock/EasyMock does to Java (well, more or less).
When using gMock,
1. first, you use some simple macros to describe the interface you want to
mock, and they will expand to the implementation of your mock class;
2. next, you create some mock objects and specify its expectations and behavior
using an intuitive syntax;
3. then you exercise code that uses the mock objects. gMock will catch any
violation to the expectations as soon as it arises.
### Why gMock?
While mock objects help you remove unnecessary dependencies in tests and make
them fast and reliable, using mocks manually in C++ is *hard*:
* Someone has to implement the mocks. The job is usually tedious and
error-prone. No wonder people go great distance to avoid it.
* The quality of those manually written mocks is a bit, uh, unpredictable. You
may see some really polished ones, but you may also see some that were
hacked up in a hurry and have all sorts of ad hoc restrictions.
* The knowledge you gained from using one mock doesn't transfer to the next
one.
In contrast, Java and Python programmers have some fine mock frameworks (jMock,
EasyMock, [Mox](http://wtf/mox), etc), which automate the creation of mocks. As
a result, mocking is a proven effective technique and widely adopted practice in
those communities. Having the right tool absolutely makes the difference.
gMock was built to help C++ programmers. It was inspired by jMock and EasyMock,
but designed with C++'s specifics in mind. It is your friend if any of the
following problems is bothering you:
* You are stuck with a sub-optimal design and wish you had done more
prototyping before it was too late, but prototyping in C++ is by no means
"rapid".
* Your tests are slow as they depend on too many libraries or use expensive
resources (e.g. a database).
* Your tests are brittle as some resources they use are unreliable (e.g. the
network).
* You want to test how your code handles a failure (e.g. a file checksum
error), but it's not easy to cause one.
* You need to make sure that your module interacts with other modules in the
right way, but it's hard to observe the interaction; therefore you resort to
observing the side effects at the end of the action, but it's awkward at
best.
* You want to "mock out" your dependencies, except that they don't have mock
implementations yet; and, frankly, you aren't thrilled by some of those
hand-written mocks.
We encourage you to use gMock as
* a *design* tool, for it lets you experiment with your interface design early
and often. More iterations lead to better designs!
* a *testing* tool to cut your tests' outbound dependencies and probe the
interaction between your module and its collaborators.
### Getting Started
gMock is bundled with googletest.
### A Case for Mock Turtles
Let's look at an example. Suppose you are developing a graphics program that
relies on a [LOGO](http://en.wikipedia.org/wiki/Logo_programming_language)-like
API for drawing. How would you test that it does the right thing? Well, you can
run it and compare the screen with a golden screen snapshot, but let's admit it:
tests like this are expensive to run and fragile (What if you just upgraded to a
shiny new graphics card that has better anti-aliasing? Suddenly you have to
update all your golden images.). It would be too painful if all your tests are
like this. Fortunately, you learned about
[Dependency Injection](http://en.wikipedia.org/wiki/Dependency_injection) and know the right thing
to do: instead of having your application talk to the system API directly, wrap
the API in an interface (say, `Turtle`) and code to that interface:
```cpp
class Turtle {
...
virtual ~Turtle() {};
virtual void PenUp() = 0;
virtual void PenDown() = 0;
virtual void Forward(int distance) = 0;
virtual void Turn(int degrees) = 0;
virtual void GoTo(int x, int y) = 0;
virtual int GetX() const = 0;
virtual int GetY() const = 0;
};
```
(Note that the destructor of `Turtle` **must** be virtual, as is the case for
**all** classes you intend to inherit from - otherwise the destructor of the
derived class will not be called when you delete an object through a base
pointer, and you'll get corrupted program states like memory leaks.)
You can control whether the turtle's movement will leave a trace using `PenUp()`
and `PenDown()`, and control its movement using `Forward()`, `Turn()`, and
`GoTo()`. Finally, `GetX()` and `GetY()` tell you the current position of the
turtle.
Your program will normally use a real implementation of this interface. In
tests, you can use a mock implementation instead. This allows you to easily
check what drawing primitives your program is calling, with what arguments, and
in which order. Tests written this way are much more robust (they won't break
because your new machine does anti-aliasing differently), easier to read and
maintain (the intent of a test is expressed in the code, not in some binary
images), and run *much, much faster*.
### Writing the Mock Class
If you are lucky, the mocks you need to use have already been implemented by
some nice people. If, however, you find yourself in the position to write a mock
class, relax - gMock turns this task into a fun game! (Well, almost.)
#### How to Define It
Using the `Turtle` interface as example, here are the simple steps you need to
follow:
* Derive a class `MockTurtle` from `Turtle`.
* Take a *virtual* function of `Turtle` (while it's possible to
[mock non-virtual methods using templates](cook_book.md#MockingNonVirtualMethods),
it's much more involved).
* In the `public:` section of the child class, write `MOCK_METHOD();`
* Now comes the fun part: you take the function signature, cut-and-paste it
into the macro, and add two commas - one between the return type and the
name, another between the name and the argument list.
* If you're mocking a const method, add a 4th parameter containing `(const)`
(the parentheses are required).
* Since you're overriding a virtual method, we suggest adding the `override`
keyword. For const methods the 4th parameter becomes `(const, override)`,
for non-const methods just `(override)`. This isn't mandatory.
* Repeat until all virtual functions you want to mock are done. (It goes
without saying that *all* pure virtual methods in your abstract class must
be either mocked or overridden.)
After the process, you should have something like:
```cpp
#include "gmock/gmock.h" // Brings in gMock.
class MockTurtle : public Turtle {
public:
...
MOCK_METHOD(void, PenUp, (), (override));
MOCK_METHOD(void, PenDown, (), (override));
MOCK_METHOD(void, Forward, (int distance), (override));
MOCK_METHOD(void, Turn, (int degrees), (override));
MOCK_METHOD(void, GoTo, (int x, int y), (override));
MOCK_METHOD(int, GetX, (), (const, override));
MOCK_METHOD(int, GetY, (), (const, override));
};
```
You don't need to define these mock methods somewhere else - the `MOCK_METHOD`
macro will generate the definitions for you. It's that simple!
#### Where to Put It
When you define a mock class, you need to decide where to put its definition.
Some people put it in a `_test.cc`. This is fine when the interface being mocked
(say, `Foo`) is owned by the same person or team. Otherwise, when the owner of
`Foo` changes it, your test could break. (You can't really expect `Foo`'s
maintainer to fix every test that uses `Foo`, can you?)
So, the rule of thumb is: if you need to mock `Foo` and it's owned by others,
define the mock class in `Foo`'s package (better, in a `testing` sub-package
such that you can clearly separate production code and testing utilities), put
it in a `.h` and a `cc_library`. Then everyone can reference them from their
tests. If `Foo` ever changes, there is only one copy of `MockFoo` to change, and
only tests that depend on the changed methods need to be fixed.
Another way to do it: you can introduce a thin layer `FooAdaptor` on top of
`Foo` and code to this new interface. Since you own `FooAdaptor`, you can absorb
changes in `Foo` much more easily. While this is more work initially, carefully
choosing the adaptor interface can make your code easier to write and more
readable (a net win in the long run), as you can choose `FooAdaptor` to fit your
specific domain much better than `Foo` does.
<!-- GOOGLETEST_CM0029 DO NOT DELETE -->
### Using Mocks in Tests
Once you have a mock class, using it is easy. The typical work flow is:
1. Import the gMock names from the `testing` namespace such that you can use
them unqualified (You only have to do it once per file. Remember that
namespaces are a good idea.
2. Create some mock objects.
3. Specify your expectations on them (How many times will a method be called?
With what arguments? What should it do? etc.).
4. Exercise some code that uses the mocks; optionally, check the result using
googletest assertions. If a mock method is called more than expected or with
wrong arguments, you'll get an error immediately.
5. When a mock is destructed, gMock will automatically check whether all
expectations on it have been satisfied.
Here's an example:
```cpp
#include "path/to/mock-turtle.h"
#include "gmock/gmock.h"
#include "gtest/gtest.h"
using ::testing::AtLeast; // #1
TEST(PainterTest, CanDrawSomething) {
MockTurtle turtle; // #2
EXPECT_CALL(turtle, PenDown()) // #3
.Times(AtLeast(1));
Painter painter(&turtle); // #4
EXPECT_TRUE(painter.DrawCircle(0, 0, 10)); // #5
}
```
As you might have guessed, this test checks that `PenDown()` is called at least
once. If the `painter` object didn't call this method, your test will fail with
a message like this:
```text
path/to/my_test.cc:119: Failure
Actual function call count doesn't match this expectation:
Actually: never called;
Expected: called at least once.
Stack trace:
...
```
**Tip 1:** If you run the test from an Emacs buffer, you can hit <Enter> on the
line number to jump right to the failed expectation.
**Tip 2:** If your mock objects are never deleted, the final verification won't
happen. Therefore it's a good idea to turn on the heap checker in your tests
when you allocate mocks on the heap. You get that automatically if you use the
`gtest_main` library already.
**Important note:** gMock requires expectations to be set **before** the mock
functions are called, otherwise the behavior is **undefined**. In particular,
you mustn't interleave `EXPECT_CALL()s` and calls to the mock functions.
This means `EXPECT_CALL()` should be read as expecting that a call will occur
*in the future*, not that a call has occurred. Why does gMock work like that?
Well, specifying the expectation beforehand allows gMock to report a violation
as soon as it rises, when the context (stack trace, etc) is still available.
This makes debugging much easier.
Admittedly, this test is contrived and doesn't do much. You can easily achieve
the same effect without using gMock. However, as we shall reveal soon, gMock
allows you to do *so much more* with the mocks.
### Setting Expectations
The key to using a mock object successfully is to set the *right expectations*
on it. If you set the expectations too strict, your test will fail as the result
of unrelated changes. If you set them too loose, bugs can slip through. You want
to do it just right such that your test can catch exactly the kind of bugs you
intend it to catch. gMock provides the necessary means for you to do it "just
right."
#### General Syntax
In gMock we use the `EXPECT_CALL()` macro to set an expectation on a mock
method. The general syntax is:
```cpp
EXPECT_CALL(mock_object, method(matchers))
.Times(cardinality)
.WillOnce(action)
.WillRepeatedly(action);
```
The macro has two arguments: first the mock object, and then the method and its
arguments. Note that the two are separated by a comma (`,`), not a period (`.`).
(Why using a comma? The answer is that it was necessary for technical reasons.)
If the method is not overloaded, the macro can also be called without matchers:
```cpp
EXPECT_CALL(mock_object, non-overloaded-method)
.Times(cardinality)
.WillOnce(action)
.WillRepeatedly(action);
```
This syntax allows the test writer to specify "called with any arguments"
without explicitly specifying the number or types of arguments. To avoid
unintended ambiguity, this syntax may only be used for methods which are not
overloaded
Either form of the macro can be followed by some optional *clauses* that provide
more information about the expectation. We'll discuss how each clause works in
the coming sections.
This syntax is designed to make an expectation read like English. For example,
you can probably guess that
```cpp
using ::testing::Return;
...
EXPECT_CALL(turtle, GetX())
.Times(5)
.WillOnce(Return(100))
.WillOnce(Return(150))
.WillRepeatedly(Return(200));
```
says that the `turtle` object's `GetX()` method will be called five times, it
will return 100 the first time, 150 the second time, and then 200 every time.
Some people like to call this style of syntax a Domain-Specific Language (DSL).
**Note:** Why do we use a macro to do this? Well it serves two purposes: first
it makes expectations easily identifiable (either by `gsearch` or by a human
reader), and second it allows gMock to include the source file location of a
failed expectation in messages, making debugging easier.
#### Matchers: What Arguments Do We Expect?
When a mock function takes arguments, we may specify what arguments we are
expecting, for example:
```cpp
// Expects the turtle to move forward by 100 units.
EXPECT_CALL(turtle, Forward(100));
```
Oftentimes you do not want to be too specific. Remember that talk about tests
being too rigid? Over specification leads to brittle tests and obscures the
intent of tests. Therefore we encourage you to specify only what's necessary—no
more, no less. If you aren't interested in the value of an argument, write `_`
as the argument, which means "anything goes":
```cpp
using ::testing::_;
...
// Expects that the turtle jumps to somewhere on the x=50 line.
EXPECT_CALL(turtle, GoTo(50, _));
```
`_` is an instance of what we call **matchers**. A matcher is like a predicate
and can test whether an argument is what we'd expect. You can use a matcher
inside `EXPECT_CALL()` wherever a function argument is expected. `_` is a
convenient way of saying "any value".
In the above examples, `100` and `50` are also matchers; implicitly, they are
the same as `Eq(100)` and `Eq(50)`, which specify that the argument must be
equal (using `operator==`) to the matcher argument. There are many
[built-in matchers](#MatcherList) for common types (as well as
[custom matchers](cook_book.md#NewMatchers)); for example:
```cpp
using ::testing::Ge;
...
// Expects the turtle moves forward by at least 100.
EXPECT_CALL(turtle, Forward(Ge(100)));
```
If you don't care about *any* arguments, rather than specify `_` for each of
them you may instead omit the parameter list:
```cpp
// Expects the turtle to move forward.
EXPECT_CALL(turtle, Forward);
// Expects the turtle to jump somewhere.
EXPECT_CALL(turtle, GoTo);
```
This works for all non-overloaded methods; if a method is overloaded, you need
to help gMock resolve which overload is expected by specifying the number of
arguments and possibly also the
[types of the arguments](cook_book.md#SelectOverload).
#### Cardinalities: How Many Times Will It Be Called?
The first clause we can specify following an `EXPECT_CALL()` is `Times()`. We
call its argument a **cardinality** as it tells *how many times* the call should
occur. It allows us to repeat an expectation many times without actually writing
it as many times. More importantly, a cardinality can be "fuzzy", just like a
matcher can be. This allows a user to express the intent of a test exactly.
An interesting special case is when we say `Times(0)`. You may have guessed - it
means that the function shouldn't be called with the given arguments at all, and
gMock will report a googletest failure whenever the function is (wrongfully)
called.
We've seen `AtLeast(n)` as an example of fuzzy cardinalities earlier. For the
list of built-in cardinalities you can use, see
[here](cheat_sheet.md#CardinalityList).
The `Times()` clause can be omitted. **If you omit `Times()`, gMock will infer
the cardinality for you.** The rules are easy to remember:
* If **neither** `WillOnce()` **nor** `WillRepeatedly()` is in the
`EXPECT_CALL()`, the inferred cardinality is `Times(1)`.
* If there are *n* `WillOnce()`'s but **no** `WillRepeatedly()`, where *n* >=
1, the cardinality is `Times(n)`.
* If there are *n* `WillOnce()`'s and **one** `WillRepeatedly()`, where *n* >=
0, the cardinality is `Times(AtLeast(n))`.
**Quick quiz:** what do you think will happen if a function is expected to be
called twice but actually called four times?
#### Actions: What Should It Do?
Remember that a mock object doesn't really have a working implementation? We as
users have to tell it what to do when a method is invoked. This is easy in
gMock.
First, if the return type of a mock function is a built-in type or a pointer,
the function has a **default action** (a `void` function will just return, a
`bool` function will return `false`, and other functions will return 0). In
addition, in C++ 11 and above, a mock function whose return type is
default-constructible (i.e. has a default constructor) has a default action of
returning a default-constructed value. If you don't say anything, this behavior
will be used.
Second, if a mock function doesn't have a default action, or the default action
doesn't suit you, you can specify the action to be taken each time the
expectation matches using a series of `WillOnce()` clauses followed by an
optional `WillRepeatedly()`. For example,
```cpp
using ::testing::Return;
...
EXPECT_CALL(turtle, GetX())
.WillOnce(Return(100))
.WillOnce(Return(200))
.WillOnce(Return(300));
```
says that `turtle.GetX()` will be called *exactly three times* (gMock inferred
this from how many `WillOnce()` clauses we've written, since we didn't
explicitly write `Times()`), and will return 100, 200, and 300 respectively.
```cpp
using ::testing::Return;
...
EXPECT_CALL(turtle, GetY())
.WillOnce(Return(100))
.WillOnce(Return(200))
.WillRepeatedly(Return(300));
```
says that `turtle.GetY()` will be called *at least twice* (gMock knows this as
we've written two `WillOnce()` clauses and a `WillRepeatedly()` while having no
explicit `Times()`), will return 100 and 200 respectively the first two times,
and 300 from the third time on.
Of course, if you explicitly write a `Times()`, gMock will not try to infer the
cardinality itself. What if the number you specified is larger than there are
`WillOnce()` clauses? Well, after all `WillOnce()`s are used up, gMock will do
the *default* action for the function every time (unless, of course, you have a
`WillRepeatedly()`.).
What can we do inside `WillOnce()` besides `Return()`? You can return a
reference using `ReturnRef(*variable*)`, or invoke a pre-defined function, among
[others](cook_book.md#using-actions).
**Important note:** The `EXPECT_CALL()` statement evaluates the action clause
only once, even though the action may be performed many times. Therefore you
must be careful about side effects. The following may not do what you want:
```cpp
using ::testing::Return;
...
int n = 100;
EXPECT_CALL(turtle, GetX())
.Times(4)
.WillRepeatedly(Return(n++));
```
Instead of returning 100, 101, 102, ..., consecutively, this mock function will
always return 100 as `n++` is only evaluated once. Similarly, `Return(new Foo)`
will create a new `Foo` object when the `EXPECT_CALL()` is executed, and will
return the same pointer every time. If you want the side effect to happen every
time, you need to define a custom action, which we'll teach in the
[cook book](http://<!-- GOOGLETEST_CM0012 DO NOT DELETE -->).
Time for another quiz! What do you think the following means?
```cpp
using ::testing::Return;
...
EXPECT_CALL(turtle, GetY())
.Times(4)
.WillOnce(Return(100));
```
Obviously `turtle.GetY()` is expected to be called four times. But if you think
it will return 100 every time, think twice! Remember that one `WillOnce()`
clause will be consumed each time the function is invoked and the default action
will be taken afterwards. So the right answer is that `turtle.GetY()` will
return 100 the first time, but **return 0 from the second time on**, as
returning 0 is the default action for `int` functions.
#### Using Multiple Expectations {#MultiExpectations}
So far we've only shown examples where you have a single expectation. More
realistically, you'll specify expectations on multiple mock methods which may be
from multiple mock objects.
By default, when a mock method is invoked, gMock will search the expectations in
the **reverse order** they are defined, and stop when an active expectation that
matches the arguments is found (you can think of it as "newer rules override
older ones."). If the matching expectation cannot take any more calls, you will
get an upper-bound-violated failure. Here's an example:
```cpp
using ::testing::_;
...
EXPECT_CALL(turtle, Forward(_)); // #1
EXPECT_CALL(turtle, Forward(10)) // #2
.Times(2);
```
If `Forward(10)` is called three times in a row, the third time it will be an
error, as the last matching expectation (#2) has been saturated. If, however,
the third `Forward(10)` call is replaced by `Forward(20)`, then it would be OK,
as now #1 will be the matching expectation.
**Note:** Why does gMock search for a match in the *reverse* order of the
expectations? The reason is that this allows a user to set up the default
expectations in a mock object's constructor or the test fixture's set-up phase
and then customize the mock by writing more specific expectations in the test
body. So, if you have two expectations on the same method, you want to put the
one with more specific matchers **after** the other, or the more specific rule
would be shadowed by the more general one that comes after it.
**Tip:** It is very common to start with a catch-all expectation for a method
and `Times(AnyNumber())` (omitting arguments, or with `_` for all arguments, if
overloaded). This makes any calls to the method expected. This is not necessary
for methods that are not mentioned at all (these are "uninteresting"), but is
useful for methods that have some expectations, but for which other calls are
ok. See
[Understanding Uninteresting vs Unexpected Calls](cook_book.md#uninteresting-vs-unexpected).
#### Ordered vs Unordered Calls {#OrderedCalls}
By default, an expectation can match a call even though an earlier expectation
hasn't been satisfied. In other words, the calls don't have to occur in the
order the expectations are specified.
Sometimes, you may want all the expected calls to occur in a strict order. To
say this in gMock is easy:
```cpp
using ::testing::InSequence;
...
TEST(FooTest, DrawsLineSegment) {
...
{
InSequence seq;
EXPECT_CALL(turtle, PenDown());
EXPECT_CALL(turtle, Forward(100));
EXPECT_CALL(turtle, PenUp());
}
Foo();
}
```
By creating an object of type `InSequence`, all expectations in its scope are
put into a *sequence* and have to occur *sequentially*. Since we are just
relying on the constructor and destructor of this object to do the actual work,
its name is really irrelevant.
In this example, we test that `Foo()` calls the three expected functions in the
order as written. If a call is made out-of-order, it will be an error.
(What if you care about the relative order of some of the calls, but not all of
them? Can you specify an arbitrary partial order? The answer is ... yes! The
details can be found [here](cook_book.md#OrderedCalls).)
#### All Expectations Are Sticky (Unless Said Otherwise) {#StickyExpectations}
Now let's do a quick quiz to see how well you can use this mock stuff already.
How would you test that the turtle is asked to go to the origin *exactly twice*
(you want to ignore any other instructions it receives)?
After you've come up with your answer, take a look at ours and compare notes
(solve it yourself first - don't cheat!):
```cpp
using ::testing::_;
using ::testing::AnyNumber;
...
EXPECT_CALL(turtle, GoTo(_, _)) // #1
.Times(AnyNumber());
EXPECT_CALL(turtle, GoTo(0, 0)) // #2
.Times(2);
```
Suppose `turtle.GoTo(0, 0)` is called three times. In the third time, gMock will
see that the arguments match expectation #2 (remember that we always pick the
last matching expectation). Now, since we said that there should be only two
such calls, gMock will report an error immediately. This is basically what we've
told you in the [Using Multiple Expectations](#MultiExpectations) section above.
This example shows that **expectations in gMock are "sticky" by default**, in
the sense that they remain active even after we have reached their invocation
upper bounds. This is an important rule to remember, as it affects the meaning
of the spec, and is **different** to how it's done in many other mocking
frameworks (Why'd we do that? Because we think our rule makes the common cases
easier to express and understand.).
Simple? Let's see if you've really understood it: what does the following code
say?
```cpp
using ::testing::Return;
...
for (int i = n; i > 0; i--) {
EXPECT_CALL(turtle, GetX())
.WillOnce(Return(10*i));
}
```
If you think it says that `turtle.GetX()` will be called `n` times and will
return 10, 20, 30, ..., consecutively, think twice! The problem is that, as we
said, expectations are sticky. So, the second time `turtle.GetX()` is called,
the last (latest) `EXPECT_CALL()` statement will match, and will immediately
lead to an "upper bound violated" error - this piece of code is not very useful!
One correct way of saying that `turtle.GetX()` will return 10, 20, 30, ..., is
to explicitly say that the expectations are *not* sticky. In other words, they
should *retire* as soon as they are saturated:
```cpp
using ::testing::Return;
...
for (int i = n; i > 0; i--) {
EXPECT_CALL(turtle, GetX())
.WillOnce(Return(10*i))
.RetiresOnSaturation();
}
```
And, there's a better way to do it: in this case, we expect the calls to occur
in a specific order, and we line up the actions to match the order. Since the
order is important here, we should make it explicit using a sequence:
```cpp
using ::testing::InSequence;
using ::testing::Return;
...
{
InSequence s;
for (int i = 1; i <= n; i++) {
EXPECT_CALL(turtle, GetX())
.WillOnce(Return(10*i))
.RetiresOnSaturation();
}
}
```
By the way, the other situation where an expectation may *not* be sticky is when
it's in a sequence - as soon as another expectation that comes after it in the
sequence has been used, it automatically retires (and will never be used to
match any call).
#### Uninteresting Calls
A mock object may have many methods, and not all of them are that interesting.
For example, in some tests we may not care about how many times `GetX()` and
`GetY()` get called.
In gMock, if you are not interested in a method, just don't say anything about
it. If a call to this method occurs, you'll see a warning in the test output,
but it won't be a failure. This is called "naggy" behavior; to change, see
[The Nice, the Strict, and the Naggy](cook_book.md#NiceStrictNaggy).

@ -0,0 +1,396 @@
## Legacy gMock FAQ {#GMockFaq}
<!-- GOOGLETEST_CM0021 DO NOT DELETE -->
### When I call a method on my mock object, the method for the real object is invoked instead. What's the problem?
In order for a method to be mocked, it must be *virtual*, unless you use the
[high-perf dependency injection technique](#MockingNonVirtualMethods).
### Can I mock a variadic function?
You cannot mock a variadic function (i.e. a function taking ellipsis (`...`)
arguments) directly in gMock.
The problem is that in general, there is *no way* for a mock object to know how
many arguments are passed to the variadic method, and what the arguments' types
are. Only the *author of the base class* knows the protocol, and we cannot look
into his or her head.
Therefore, to mock such a function, the *user* must teach the mock object how to
figure out the number of arguments and their types. One way to do it is to
provide overloaded versions of the function.
Ellipsis arguments are inherited from C and not really a C++ feature. They are
unsafe to use and don't work with arguments that have constructors or
destructors. Therefore we recommend to avoid them in C++ as much as possible.
### MSVC gives me warning C4301 or C4373 when I define a mock method with a const parameter. Why?
If you compile this using Microsoft Visual C++ 2005 SP1:
```cpp
class Foo {
...
virtual void Bar(const int i) = 0;
};
class MockFoo : public Foo {
...
MOCK_METHOD(void, Bar, (const int i), (override));
};
```
You may get the following warning:
```shell
warning C4301: 'MockFoo::Bar': overriding virtual function only differs from 'Foo::Bar' by const/volatile qualifier
```
This is a MSVC bug. The same code compiles fine with gcc, for example. If you
use Visual C++ 2008 SP1, you would get the warning:
```shell
warning C4373: 'MockFoo::Bar': virtual function overrides 'Foo::Bar', previous versions of the compiler did not override when parameters only differed by const/volatile qualifiers
```
In C++, if you *declare* a function with a `const` parameter, the `const`
modifier is ignored. Therefore, the `Foo` base class above is equivalent to:
```cpp
class Foo {
...
virtual void Bar(int i) = 0; // int or const int? Makes no difference.
};
```
In fact, you can *declare* `Bar()` with an `int` parameter, and define it with a
`const int` parameter. The compiler will still match them up.
Since making a parameter `const` is meaningless in the method declaration, we
recommend to remove it in both `Foo` and `MockFoo`. That should workaround the
VC bug.
Note that we are talking about the *top-level* `const` modifier here. If the
function parameter is passed by pointer or reference, declaring the pointee or
referee as `const` is still meaningful. For example, the following two
declarations are *not* equivalent:
```cpp
void Bar(int* p); // Neither p nor *p is const.
void Bar(const int* p); // p is not const, but *p is.
```
<!-- GOOGLETEST_CM0030 DO NOT DELETE -->
### I can't figure out why gMock thinks my expectations are not satisfied. What should I do?
You might want to run your test with `--gmock_verbose=info`. This flag lets
gMock print a trace of every mock function call it receives. By studying the
trace, you'll gain insights on why the expectations you set are not met.
If you see the message "The mock function has no default action set, and its
return type has no default value set.", then try
[adding a default action](for_dummies.md#DefaultValue). Due to a known issue,
unexpected calls on mocks without default actions don't print out a detailed
comparison between the actual arguments and the expected arguments.
### My program crashed and `ScopedMockLog` spit out tons of messages. Is it a gMock bug?
gMock and `ScopedMockLog` are likely doing the right thing here.
When a test crashes, the failure signal handler will try to log a lot of
information (the stack trace, and the address map, for example). The messages
are compounded if you have many threads with depth stacks. When `ScopedMockLog`
intercepts these messages and finds that they don't match any expectations, it
prints an error for each of them.
You can learn to ignore the errors, or you can rewrite your expectations to make
your test more robust, for example, by adding something like:
```cpp
using ::testing::AnyNumber;
using ::testing::Not;
...
// Ignores any log not done by us.
EXPECT_CALL(log, Log(_, Not(EndsWith("/my_file.cc")), _))
.Times(AnyNumber());
```
### How can I assert that a function is NEVER called?
```cpp
using ::testing::_;
...
EXPECT_CALL(foo, Bar(_))
.Times(0);
```
<!-- GOOGLETEST_CM0031 DO NOT DELETE -->
### I have a failed test where gMock tells me TWICE that a particular expectation is not satisfied. Isn't this redundant?
When gMock detects a failure, it prints relevant information (the mock function
arguments, the state of relevant expectations, and etc) to help the user debug.
If another failure is detected, gMock will do the same, including printing the
state of relevant expectations.
Sometimes an expectation's state didn't change between two failures, and you'll
see the same description of the state twice. They are however *not* redundant,
as they refer to *different points in time*. The fact they are the same *is*
interesting information.
### I get a heapcheck failure when using a mock object, but using a real object is fine. What can be wrong?
Does the class (hopefully a pure interface) you are mocking have a virtual
destructor?
Whenever you derive from a base class, make sure its destructor is virtual.
Otherwise Bad Things will happen. Consider the following code:
```cpp
class Base {
public:
// Not virtual, but should be.
~Base() { ... }
...
};
class Derived : public Base {
public:
...
private:
std::string value_;
};
...
Base* p = new Derived;
...
delete p; // Surprise! ~Base() will be called, but ~Derived() will not
// - value_ is leaked.
```
By changing `~Base()` to virtual, `~Derived()` will be correctly called when
`delete p` is executed, and the heap checker will be happy.
### The "newer expectations override older ones" rule makes writing expectations awkward. Why does gMock do that?
When people complain about this, often they are referring to code like:
```cpp
using ::testing::Return;
...
// foo.Bar() should be called twice, return 1 the first time, and return
// 2 the second time. However, I have to write the expectations in the
// reverse order. This sucks big time!!!
EXPECT_CALL(foo, Bar())
.WillOnce(Return(2))
.RetiresOnSaturation();
EXPECT_CALL(foo, Bar())
.WillOnce(Return(1))
.RetiresOnSaturation();
```
The problem, is that they didn't pick the **best** way to express the test's
intent.
By default, expectations don't have to be matched in *any* particular order. If
you want them to match in a certain order, you need to be explicit. This is
gMock's (and jMock's) fundamental philosophy: it's easy to accidentally
over-specify your tests, and we want to make it harder to do so.
There are two better ways to write the test spec. You could either put the
expectations in sequence:
```cpp
using ::testing::Return;
...
// foo.Bar() should be called twice, return 1 the first time, and return
// 2 the second time. Using a sequence, we can write the expectations
// in their natural order.
{
InSequence s;
EXPECT_CALL(foo, Bar())
.WillOnce(Return(1))
.RetiresOnSaturation();
EXPECT_CALL(foo, Bar())
.WillOnce(Return(2))
.RetiresOnSaturation();
}
```
or you can put the sequence of actions in the same expectation:
```cpp
using ::testing::Return;
...
// foo.Bar() should be called twice, return 1 the first time, and return
// 2 the second time.
EXPECT_CALL(foo, Bar())
.WillOnce(Return(1))
.WillOnce(Return(2))
.RetiresOnSaturation();
```
Back to the original questions: why does gMock search the expectations (and
`ON_CALL`s) from back to front? Because this allows a user to set up a mock's
behavior for the common case early (e.g. in the mock's constructor or the test
fixture's set-up phase) and customize it with more specific rules later. If
gMock searches from front to back, this very useful pattern won't be possible.
### gMock prints a warning when a function without EXPECT_CALL is called, even if I have set its behavior using ON_CALL. Would it be reasonable not to show the warning in this case?
When choosing between being neat and being safe, we lean toward the latter. So
the answer is that we think it's better to show the warning.
Often people write `ON_CALL`s in the mock object's constructor or `SetUp()`, as
the default behavior rarely changes from test to test. Then in the test body
they set the expectations, which are often different for each test. Having an
`ON_CALL` in the set-up part of a test doesn't mean that the calls are expected.
If there's no `EXPECT_CALL` and the method is called, it's possibly an error. If
we quietly let the call go through without notifying the user, bugs may creep in
unnoticed.
If, however, you are sure that the calls are OK, you can write
```cpp
using ::testing::_;
...
EXPECT_CALL(foo, Bar(_))
.WillRepeatedly(...);
```
instead of
```cpp
using ::testing::_;
...
ON_CALL(foo, Bar(_))
.WillByDefault(...);
```
This tells gMock that you do expect the calls and no warning should be printed.
Also, you can control the verbosity by specifying `--gmock_verbose=error`. Other
values are `info` and `warning`. If you find the output too noisy when
debugging, just choose a less verbose level.
### How can I delete the mock function's argument in an action?
If your mock function takes a pointer argument and you want to delete that
argument, you can use testing::DeleteArg<N>() to delete the N'th (zero-indexed)
argument:
```cpp
using ::testing::_;
...
MOCK_METHOD(void, Bar, (X* x, const Y& y));
...
EXPECT_CALL(mock_foo_, Bar(_, _))
.WillOnce(testing::DeleteArg<0>()));
```
### How can I perform an arbitrary action on a mock function's argument?
If you find yourself needing to perform some action that's not supported by
gMock directly, remember that you can define your own actions using
[`MakeAction()`](#NewMonoActions) or
[`MakePolymorphicAction()`](#NewPolyActions), or you can write a stub function
and invoke it using [`Invoke()`](#FunctionsAsActions).
```cpp
using ::testing::_;
using ::testing::Invoke;
...
MOCK_METHOD(void, Bar, (X* p));
...
EXPECT_CALL(mock_foo_, Bar(_))
.WillOnce(Invoke(MyAction(...)));
```
### My code calls a static/global function. Can I mock it?
You can, but you need to make some changes.
In general, if you find yourself needing to mock a static function, it's a sign
that your modules are too tightly coupled (and less flexible, less reusable,
less testable, etc). You are probably better off defining a small interface and
call the function through that interface, which then can be easily mocked. It's
a bit of work initially, but usually pays for itself quickly.
This Google Testing Blog
[post](https://testing.googleblog.com/2008/06/defeat-static-cling.html) says it
excellently. Check it out.
### My mock object needs to do complex stuff. It's a lot of pain to specify the actions. gMock sucks!
I know it's not a question, but you get an answer for free any way. :-)
With gMock, you can create mocks in C++ easily. And people might be tempted to
use them everywhere. Sometimes they work great, and sometimes you may find them,
well, a pain to use. So, what's wrong in the latter case?
When you write a test without using mocks, you exercise the code and assert that
it returns the correct value or that the system is in an expected state. This is
sometimes called "state-based testing".
Mocks are great for what some call "interaction-based" testing: instead of
checking the system state at the very end, mock objects verify that they are
invoked the right way and report an error as soon as it arises, giving you a
handle on the precise context in which the error was triggered. This is often
more effective and economical to do than state-based testing.
If you are doing state-based testing and using a test double just to simulate
the real object, you are probably better off using a fake. Using a mock in this
case causes pain, as it's not a strong point for mocks to perform complex
actions. If you experience this and think that mocks suck, you are just not
using the right tool for your problem. Or, you might be trying to solve the
wrong problem. :-)
### I got a warning "Uninteresting function call encountered - default action taken.." Should I panic?
By all means, NO! It's just an FYI. :-)
What it means is that you have a mock function, you haven't set any expectations
on it (by gMock's rule this means that you are not interested in calls to this
function and therefore it can be called any number of times), and it is called.
That's OK - you didn't say it's not OK to call the function!
What if you actually meant to disallow this function to be called, but forgot to
write `EXPECT_CALL(foo, Bar()).Times(0)`? While one can argue that it's the
user's fault, gMock tries to be nice and prints you a note.
So, when you see the message and believe that there shouldn't be any
uninteresting calls, you should investigate what's going on. To make your life
easier, gMock dumps the stack trace when an uninteresting call is encountered.
From that you can figure out which mock function it is, and how it is called.
### I want to define a custom action. Should I use Invoke() or implement the ActionInterface interface?
Either way is fine - you want to choose the one that's more convenient for your
circumstance.
Usually, if your action is for a particular function type, defining it using
`Invoke()` should be easier; if your action can be used in functions of
different types (e.g. if you are defining `Return(*value*)`),
`MakePolymorphicAction()` is easiest. Sometimes you want precise control on what
types of functions the action can be used in, and implementing `ActionInterface`
is the way to go here. See the implementation of `Return()` in
`testing/base/public/gmock-actions.h` for an example.
### I use SetArgPointee() in WillOnce(), but gcc complains about "conflicting return type specified". What does it mean?
You got this error as gMock has no idea what value it should return when the
mock method is called. `SetArgPointee()` says what the side effect is, but
doesn't say what the return value should be. You need `DoAll()` to chain a
`SetArgPointee()` with a `Return()` that provides a value appropriate to the API
being mocked.
See this [recipe](cook_book.md#mocking-side-effects) for more details and an
example.
### I have a huge mock class, and Microsoft Visual C++ runs out of memory when compiling it. What can I do?
We've noticed that when the `/clr` compiler flag is used, Visual C++ uses 5~6
times as much memory when compiling a mock class. We suggest to avoid `/clr`
when compiling native C++ mocks.

File diff suppressed because it is too large Load Diff

@ -0,0 +1,157 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements some commonly used cardinalities. More
// cardinalities can be defined by the user implementing the
// CardinalityInterface interface if necessary.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_CARDINALITIES_H_
#define GMOCK_INCLUDE_GMOCK_GMOCK_CARDINALITIES_H_
#include <limits.h>
#include <memory>
#include <ostream> // NOLINT
#include "gmock/internal/gmock-port.h"
#include "gtest/gtest.h"
GTEST_DISABLE_MSC_WARNINGS_PUSH_(4251 \
/* class A needs to have dll-interface to be used by clients of class B */)
namespace testing {
// To implement a cardinality Foo, define:
// 1. a class FooCardinality that implements the
// CardinalityInterface interface, and
// 2. a factory function that creates a Cardinality object from a
// const FooCardinality*.
//
// The two-level delegation design follows that of Matcher, providing
// consistency for extension developers. It also eases ownership
// management as Cardinality objects can now be copied like plain values.
// The implementation of a cardinality.
class CardinalityInterface {
public:
virtual ~CardinalityInterface() {}
// Conservative estimate on the lower/upper bound of the number of
// calls allowed.
virtual int ConservativeLowerBound() const { return 0; }
virtual int ConservativeUpperBound() const { return INT_MAX; }
// Returns true if and only if call_count calls will satisfy this
// cardinality.
virtual bool IsSatisfiedByCallCount(int call_count) const = 0;
// Returns true if and only if call_count calls will saturate this
// cardinality.
virtual bool IsSaturatedByCallCount(int call_count) const = 0;
// Describes self to an ostream.
virtual void DescribeTo(::std::ostream* os) const = 0;
};
// A Cardinality is a copyable and IMMUTABLE (except by assignment)
// object that specifies how many times a mock function is expected to
// be called. The implementation of Cardinality is just a std::shared_ptr
// to const CardinalityInterface. Don't inherit from Cardinality!
class GTEST_API_ Cardinality {
public:
// Constructs a null cardinality. Needed for storing Cardinality
// objects in STL containers.
Cardinality() {}
// Constructs a Cardinality from its implementation.
explicit Cardinality(const CardinalityInterface* impl) : impl_(impl) {}
// Conservative estimate on the lower/upper bound of the number of
// calls allowed.
int ConservativeLowerBound() const { return impl_->ConservativeLowerBound(); }
int ConservativeUpperBound() const { return impl_->ConservativeUpperBound(); }
// Returns true if and only if call_count calls will satisfy this
// cardinality.
bool IsSatisfiedByCallCount(int call_count) const {
return impl_->IsSatisfiedByCallCount(call_count);
}
// Returns true if and only if call_count calls will saturate this
// cardinality.
bool IsSaturatedByCallCount(int call_count) const {
return impl_->IsSaturatedByCallCount(call_count);
}
// Returns true if and only if call_count calls will over-saturate this
// cardinality, i.e. exceed the maximum number of allowed calls.
bool IsOverSaturatedByCallCount(int call_count) const {
return impl_->IsSaturatedByCallCount(call_count) &&
!impl_->IsSatisfiedByCallCount(call_count);
}
// Describes self to an ostream
void DescribeTo(::std::ostream* os) const { impl_->DescribeTo(os); }
// Describes the given actual call count to an ostream.
static void DescribeActualCallCountTo(int actual_call_count,
::std::ostream* os);
private:
std::shared_ptr<const CardinalityInterface> impl_;
};
// Creates a cardinality that allows at least n calls.
GTEST_API_ Cardinality AtLeast(int n);
// Creates a cardinality that allows at most n calls.
GTEST_API_ Cardinality AtMost(int n);
// Creates a cardinality that allows any number of calls.
GTEST_API_ Cardinality AnyNumber();
// Creates a cardinality that allows between min and max calls.
GTEST_API_ Cardinality Between(int min, int max);
// Creates a cardinality that allows exactly n calls.
GTEST_API_ Cardinality Exactly(int n);
// Creates a cardinality from its implementation.
inline Cardinality MakeCardinality(const CardinalityInterface* c) {
return Cardinality(c);
}
} // namespace testing
GTEST_DISABLE_MSC_WARNINGS_POP_() // 4251
#endif // GMOCK_INCLUDE_GMOCK_GMOCK_CARDINALITIES_H_

@ -0,0 +1,253 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements MOCK_METHOD.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef THIRD_PARTY_GOOGLETEST_GOOGLEMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_FUNCTION_MOCKER_H_ // NOLINT
#define THIRD_PARTY_GOOGLETEST_GOOGLEMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_FUNCTION_MOCKER_H_ // NOLINT
#include "gmock/gmock-generated-function-mockers.h" // NOLINT
#include "gmock/internal/gmock-pp.h"
#define MOCK_METHOD(...) \
GMOCK_PP_VARIADIC_CALL(GMOCK_INTERNAL_MOCK_METHOD_ARG_, __VA_ARGS__)
#define GMOCK_INTERNAL_MOCK_METHOD_ARG_1(...) \
GMOCK_INTERNAL_WRONG_ARITY(__VA_ARGS__)
#define GMOCK_INTERNAL_MOCK_METHOD_ARG_2(...) \
GMOCK_INTERNAL_WRONG_ARITY(__VA_ARGS__)
#define GMOCK_INTERNAL_MOCK_METHOD_ARG_3(_Ret, _MethodName, _Args) \
GMOCK_INTERNAL_MOCK_METHOD_ARG_4(_Ret, _MethodName, _Args, ())
#define GMOCK_INTERNAL_MOCK_METHOD_ARG_4(_Ret, _MethodName, _Args, _Spec) \
GMOCK_INTERNAL_ASSERT_PARENTHESIS(_Args); \
GMOCK_INTERNAL_ASSERT_PARENTHESIS(_Spec); \
GMOCK_INTERNAL_ASSERT_VALID_SIGNATURE( \
GMOCK_PP_NARG0 _Args, GMOCK_INTERNAL_SIGNATURE(_Ret, _Args)); \
GMOCK_INTERNAL_ASSERT_VALID_SPEC(_Spec) \
GMOCK_INTERNAL_MOCK_METHOD_IMPL( \
GMOCK_PP_NARG0 _Args, _MethodName, GMOCK_INTERNAL_HAS_CONST(_Spec), \
GMOCK_INTERNAL_HAS_OVERRIDE(_Spec), GMOCK_INTERNAL_HAS_FINAL(_Spec), \
GMOCK_INTERNAL_HAS_NOEXCEPT(_Spec), GMOCK_INTERNAL_GET_CALLTYPE(_Spec), \
(GMOCK_INTERNAL_SIGNATURE(_Ret, _Args)))
#define GMOCK_INTERNAL_MOCK_METHOD_ARG_5(...) \
GMOCK_INTERNAL_WRONG_ARITY(__VA_ARGS__)
#define GMOCK_INTERNAL_MOCK_METHOD_ARG_6(...) \
GMOCK_INTERNAL_WRONG_ARITY(__VA_ARGS__)
#define GMOCK_INTERNAL_MOCK_METHOD_ARG_7(...) \
GMOCK_INTERNAL_WRONG_ARITY(__VA_ARGS__)
#define GMOCK_INTERNAL_WRONG_ARITY(...) \
static_assert( \
false, \
"MOCK_METHOD must be called with 3 or 4 arguments. _Ret, " \
"_MethodName, _Args and optionally _Spec. _Args and _Spec must be " \
"enclosed in parentheses. If _Ret is a type with unprotected commas, " \
"it must also be enclosed in parentheses.")
#define GMOCK_INTERNAL_ASSERT_PARENTHESIS(_Tuple) \
static_assert( \
GMOCK_PP_IS_ENCLOSED_PARENS(_Tuple), \
GMOCK_PP_STRINGIZE(_Tuple) " should be enclosed in parentheses.")
#define GMOCK_INTERNAL_ASSERT_VALID_SIGNATURE(_N, ...) \
static_assert( \
std::is_function<__VA_ARGS__>::value, \
"Signature must be a function type, maybe return type contains " \
"unprotected comma."); \
static_assert( \
::testing::tuple_size<typename ::testing::internal::Function< \
__VA_ARGS__>::ArgumentTuple>::value == _N, \
"This method does not take " GMOCK_PP_STRINGIZE( \
_N) " arguments. Parenthesize all types with unproctected commas.")
#define GMOCK_INTERNAL_ASSERT_VALID_SPEC(_Spec) \
GMOCK_PP_FOR_EACH(GMOCK_INTERNAL_ASSERT_VALID_SPEC_ELEMENT, ~, _Spec)
#define GMOCK_INTERNAL_MOCK_METHOD_IMPL(_N, _MethodName, _Constness, \
_Override, _Final, _Noexcept, \
_CallType, _Signature) \
typename ::testing::internal::Function<GMOCK_PP_REMOVE_PARENS( \
_Signature)>::Result \
GMOCK_INTERNAL_EXPAND(_CallType) \
_MethodName(GMOCK_PP_REPEAT(GMOCK_INTERNAL_PARAMETER, _Signature, _N)) \
GMOCK_PP_IF(_Constness, const, ) GMOCK_PP_IF(_Noexcept, noexcept, ) \
GMOCK_PP_IF(_Override, override, ) \
GMOCK_PP_IF(_Final, final, ) { \
GMOCK_MOCKER_(_N, _Constness, _MethodName) \
.SetOwnerAndName(this, #_MethodName); \
return GMOCK_MOCKER_(_N, _Constness, _MethodName) \
.Invoke(GMOCK_PP_REPEAT(GMOCK_INTERNAL_FORWARD_ARG, _Signature, _N)); \
} \
::testing::MockSpec<GMOCK_PP_REMOVE_PARENS(_Signature)> gmock_##_MethodName( \
GMOCK_PP_REPEAT(GMOCK_INTERNAL_MATCHER_PARAMETER, _Signature, _N)) \
GMOCK_PP_IF(_Constness, const, ) { \
GMOCK_MOCKER_(_N, _Constness, _MethodName).RegisterOwner(this); \
return GMOCK_MOCKER_(_N, _Constness, _MethodName) \
.With(GMOCK_PP_REPEAT(GMOCK_INTERNAL_MATCHER_ARGUMENT, , _N)); \
} \
::testing::MockSpec<GMOCK_PP_REMOVE_PARENS(_Signature)> gmock_##_MethodName( \
const ::testing::internal::WithoutMatchers&, \
GMOCK_PP_IF(_Constness, const, )::testing::internal::Function< \
GMOCK_PP_REMOVE_PARENS(_Signature)>*) \
const GMOCK_PP_IF(_Noexcept, noexcept, ) { \
return GMOCK_PP_CAT(::testing::internal::AdjustConstness_, \
GMOCK_PP_IF(_Constness, const, ))(this) \
->gmock_##_MethodName(GMOCK_PP_REPEAT( \
GMOCK_INTERNAL_A_MATCHER_ARGUMENT, _Signature, _N)); \
} \
mutable ::testing::FunctionMocker<GMOCK_PP_REMOVE_PARENS(_Signature)> \
GMOCK_MOCKER_(_N, _Constness, _MethodName)
#define GMOCK_INTERNAL_EXPAND(...) __VA_ARGS__
// Five Valid modifiers.
#define GMOCK_INTERNAL_HAS_CONST(_Tuple) \
GMOCK_PP_HAS_COMMA(GMOCK_PP_FOR_EACH(GMOCK_INTERNAL_DETECT_CONST, ~, _Tuple))
#define GMOCK_INTERNAL_HAS_OVERRIDE(_Tuple) \
GMOCK_PP_HAS_COMMA( \
GMOCK_PP_FOR_EACH(GMOCK_INTERNAL_DETECT_OVERRIDE, ~, _Tuple))
#define GMOCK_INTERNAL_HAS_FINAL(_Tuple) \
GMOCK_PP_HAS_COMMA(GMOCK_PP_FOR_EACH(GMOCK_INTERNAL_DETECT_FINAL, ~, _Tuple))
#define GMOCK_INTERNAL_HAS_NOEXCEPT(_Tuple) \
GMOCK_PP_HAS_COMMA( \
GMOCK_PP_FOR_EACH(GMOCK_INTERNAL_DETECT_NOEXCEPT, ~, _Tuple))
#define GMOCK_INTERNAL_GET_CALLTYPE(_Tuple) \
GMOCK_PP_FOR_EACH(GMOCK_INTERNAL_GET_CALLTYPE_IMPL, ~, _Tuple)
#define GMOCK_INTERNAL_ASSERT_VALID_SPEC_ELEMENT(_i, _, _elem) \
static_assert( \
(GMOCK_PP_HAS_COMMA(GMOCK_INTERNAL_DETECT_CONST(_i, _, _elem)) + \
GMOCK_PP_HAS_COMMA(GMOCK_INTERNAL_DETECT_OVERRIDE(_i, _, _elem)) + \
GMOCK_PP_HAS_COMMA(GMOCK_INTERNAL_DETECT_FINAL(_i, _, _elem)) + \
GMOCK_PP_HAS_COMMA(GMOCK_INTERNAL_DETECT_NOEXCEPT(_i, _, _elem)) + \
GMOCK_INTERNAL_IS_CALLTYPE(_elem)) == 1, \
GMOCK_PP_STRINGIZE( \
_elem) " cannot be recognized as a valid specification modifier.");
// Modifiers implementation.
#define GMOCK_INTERNAL_DETECT_CONST(_i, _, _elem) \
GMOCK_PP_CAT(GMOCK_INTERNAL_DETECT_CONST_I_, _elem)
#define GMOCK_INTERNAL_DETECT_CONST_I_const ,
#define GMOCK_INTERNAL_DETECT_OVERRIDE(_i, _, _elem) \
GMOCK_PP_CAT(GMOCK_INTERNAL_DETECT_OVERRIDE_I_, _elem)
#define GMOCK_INTERNAL_DETECT_OVERRIDE_I_override ,
#define GMOCK_INTERNAL_DETECT_FINAL(_i, _, _elem) \
GMOCK_PP_CAT(GMOCK_INTERNAL_DETECT_FINAL_I_, _elem)
#define GMOCK_INTERNAL_DETECT_FINAL_I_final ,
// TODO(iserna): Maybe noexcept should accept an argument here as well.
#define GMOCK_INTERNAL_DETECT_NOEXCEPT(_i, _, _elem) \
GMOCK_PP_CAT(GMOCK_INTERNAL_DETECT_NOEXCEPT_I_, _elem)
#define GMOCK_INTERNAL_DETECT_NOEXCEPT_I_noexcept ,
#define GMOCK_INTERNAL_GET_CALLTYPE_IMPL(_i, _, _elem) \
GMOCK_PP_IF(GMOCK_INTERNAL_IS_CALLTYPE(_elem), \
GMOCK_INTERNAL_GET_VALUE_CALLTYPE, GMOCK_PP_EMPTY) \
(_elem)
// TODO(iserna): GMOCK_INTERNAL_IS_CALLTYPE and
// GMOCK_INTERNAL_GET_VALUE_CALLTYPE needed more expansions to work on windows
// maybe they can be simplified somehow.
#define GMOCK_INTERNAL_IS_CALLTYPE(_arg) \
GMOCK_INTERNAL_IS_CALLTYPE_I( \
GMOCK_PP_CAT(GMOCK_INTERNAL_IS_CALLTYPE_HELPER_, _arg))
#define GMOCK_INTERNAL_IS_CALLTYPE_I(_arg) GMOCK_PP_IS_ENCLOSED_PARENS(_arg)
#define GMOCK_INTERNAL_GET_VALUE_CALLTYPE(_arg) \
GMOCK_INTERNAL_GET_VALUE_CALLTYPE_I( \
GMOCK_PP_CAT(GMOCK_INTERNAL_IS_CALLTYPE_HELPER_, _arg))
#define GMOCK_INTERNAL_GET_VALUE_CALLTYPE_I(_arg) \
GMOCK_PP_CAT(GMOCK_PP_IDENTITY, _arg)
#define GMOCK_INTERNAL_IS_CALLTYPE_HELPER_Calltype
#define GMOCK_INTERNAL_SIGNATURE(_Ret, _Args) \
GMOCK_PP_IF(GMOCK_PP_IS_BEGIN_PARENS(_Ret), GMOCK_PP_REMOVE_PARENS, \
GMOCK_PP_IDENTITY) \
(_Ret)(GMOCK_PP_FOR_EACH(GMOCK_INTERNAL_GET_TYPE, _, _Args))
#define GMOCK_INTERNAL_GET_TYPE(_i, _, _elem) \
GMOCK_PP_COMMA_IF(_i) \
GMOCK_PP_IF(GMOCK_PP_IS_BEGIN_PARENS(_elem), GMOCK_PP_REMOVE_PARENS, \
GMOCK_PP_IDENTITY) \
(_elem)
#define GMOCK_INTERNAL_PARAMETER(_i, _Signature, _) \
GMOCK_PP_COMMA_IF(_i) \
GMOCK_INTERNAL_ARG_O(typename, GMOCK_PP_INC(_i), \
GMOCK_PP_REMOVE_PARENS(_Signature)) \
gmock_a##_i
#define GMOCK_INTERNAL_FORWARD_ARG(_i, _Signature, _) \
GMOCK_PP_COMMA_IF(_i) \
::std::forward<GMOCK_INTERNAL_ARG_O(typename, GMOCK_PP_INC(_i), \
GMOCK_PP_REMOVE_PARENS(_Signature))>( \
gmock_a##_i)
#define GMOCK_INTERNAL_MATCHER_PARAMETER(_i, _Signature, _) \
GMOCK_PP_COMMA_IF(_i) \
GMOCK_INTERNAL_MATCHER_O(typename, GMOCK_PP_INC(_i), \
GMOCK_PP_REMOVE_PARENS(_Signature)) \
gmock_a##_i
#define GMOCK_INTERNAL_MATCHER_ARGUMENT(_i, _1, _2) \
GMOCK_PP_COMMA_IF(_i) \
gmock_a##_i
#define GMOCK_INTERNAL_A_MATCHER_ARGUMENT(_i, _Signature, _) \
GMOCK_PP_COMMA_IF(_i) \
::testing::A<GMOCK_INTERNAL_ARG_O(typename, GMOCK_PP_INC(_i), \
GMOCK_PP_REMOVE_PARENS(_Signature))>()
#define GMOCK_INTERNAL_ARG_O(_tn, _i, ...) GMOCK_ARG_(_tn, _i, __VA_ARGS__)
#define GMOCK_INTERNAL_MATCHER_O(_tn, _i, ...) \
GMOCK_MATCHER_(_tn, _i, __VA_ARGS__)
#endif // THIRD_PARTY_GOOGLETEST_GOOGLEMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_FUNCTION_MOCKER_H_

@ -0,0 +1,627 @@
$$ -*- mode: c++; -*-
$$ This is a Pump source file. Please use Pump to convert it to
$$ gmock-generated-actions.h.
$$
$var n = 10 $$ The maximum arity we support.
$$}} This meta comment fixes auto-indentation in editors.
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements some commonly used variadic actions.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_
#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_
#include <memory>
#include <utility>
#include "gmock/gmock-actions.h"
#include "gmock/internal/gmock-port.h"
namespace testing {
namespace internal {
// A macro from the ACTION* family (defined later in this file)
// defines an action that can be used in a mock function. Typically,
// these actions only care about a subset of the arguments of the mock
// function. For example, if such an action only uses the second
// argument, it can be used in any mock function that takes >= 2
// arguments where the type of the second argument is compatible.
//
// Therefore, the action implementation must be prepared to take more
// arguments than it needs. The ExcessiveArg type is used to
// represent those excessive arguments. In order to keep the compiler
// error messages tractable, we define it in the testing namespace
// instead of testing::internal. However, this is an INTERNAL TYPE
// and subject to change without notice, so a user MUST NOT USE THIS
// TYPE DIRECTLY.
struct ExcessiveArg {};
// A helper class needed for implementing the ACTION* macros.
template <typename Result, class Impl>
class ActionHelper {
public:
$range i 0..n
$for i
[[
$var template = [[$if i==0 [[]] $else [[
$range j 0..i-1
template <$for j, [[typename A$j]]>
]]]]
$range j 0..i-1
$var As = [[$for j, [[A$j]]]]
$var as = [[$for j, [[std::get<$j>(args)]]]]
$range k 1..n-i
$var eas = [[$for k, [[ExcessiveArg()]]]]
$var arg_list = [[$if (i==0) | (i==n) [[$as$eas]] $else [[$as, $eas]]]]
$template
static Result Perform(Impl* impl, const ::std::tuple<$As>& args) {
return impl->template gmock_PerformImpl<$As>(args, $arg_list);
}
]]
};
} // namespace internal
} // namespace testing
// The ACTION* family of macros can be used in a namespace scope to
// define custom actions easily. The syntax:
//
// ACTION(name) { statements; }
//
// will define an action with the given name that executes the
// statements. The value returned by the statements will be used as
// the return value of the action. Inside the statements, you can
// refer to the K-th (0-based) argument of the mock function by
// 'argK', and refer to its type by 'argK_type'. For example:
//
// ACTION(IncrementArg1) {
// arg1_type temp = arg1;
// return ++(*temp);
// }
//
// allows you to write
//
// ...WillOnce(IncrementArg1());
//
// You can also refer to the entire argument tuple and its type by
// 'args' and 'args_type', and refer to the mock function type and its
// return type by 'function_type' and 'return_type'.
//
// Note that you don't need to specify the types of the mock function
// arguments. However rest assured that your code is still type-safe:
// you'll get a compiler error if *arg1 doesn't support the ++
// operator, or if the type of ++(*arg1) isn't compatible with the
// mock function's return type, for example.
//
// Sometimes you'll want to parameterize the action. For that you can use
// another macro:
//
// ACTION_P(name, param_name) { statements; }
//
// For example:
//
// ACTION_P(Add, n) { return arg0 + n; }
//
// will allow you to write:
//
// ...WillOnce(Add(5));
//
// Note that you don't need to provide the type of the parameter
// either. If you need to reference the type of a parameter named
// 'foo', you can write 'foo_type'. For example, in the body of
// ACTION_P(Add, n) above, you can write 'n_type' to refer to the type
// of 'n'.
//
// We also provide ACTION_P2, ACTION_P3, ..., up to ACTION_P$n to support
// multi-parameter actions.
//
// For the purpose of typing, you can view
//
// ACTION_Pk(Foo, p1, ..., pk) { ... }
//
// as shorthand for
//
// template <typename p1_type, ..., typename pk_type>
// FooActionPk<p1_type, ..., pk_type> Foo(p1_type p1, ..., pk_type pk) { ... }
//
// In particular, you can provide the template type arguments
// explicitly when invoking Foo(), as in Foo<long, bool>(5, false);
// although usually you can rely on the compiler to infer the types
// for you automatically. You can assign the result of expression
// Foo(p1, ..., pk) to a variable of type FooActionPk<p1_type, ...,
// pk_type>. This can be useful when composing actions.
//
// You can also overload actions with different numbers of parameters:
//
// ACTION_P(Plus, a) { ... }
// ACTION_P2(Plus, a, b) { ... }
//
// While it's tempting to always use the ACTION* macros when defining
// a new action, you should also consider implementing ActionInterface
// or using MakePolymorphicAction() instead, especially if you need to
// use the action a lot. While these approaches require more work,
// they give you more control on the types of the mock function
// arguments and the action parameters, which in general leads to
// better compiler error messages that pay off in the long run. They
// also allow overloading actions based on parameter types (as opposed
// to just based on the number of parameters).
//
// CAVEAT:
//
// ACTION*() can only be used in a namespace scope as templates cannot be
// declared inside of a local class.
// Users can, however, define any local functors (e.g. a lambda) that
// can be used as actions.
//
// MORE INFORMATION:
//
// To learn more about using these macros, please search for 'ACTION' on
// https://github.com/google/googletest/blob/master/googlemock/docs/cook_book.md
$range i 0..n
$range k 0..n-1
// An internal macro needed for implementing ACTION*().
#define GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_\
const args_type& args GTEST_ATTRIBUTE_UNUSED_
$for k [[, \
const arg$k[[]]_type& arg$k GTEST_ATTRIBUTE_UNUSED_]]
// Sometimes you want to give an action explicit template parameters
// that cannot be inferred from its value parameters. ACTION() and
// ACTION_P*() don't support that. ACTION_TEMPLATE() remedies that
// and can be viewed as an extension to ACTION() and ACTION_P*().
//
// The syntax:
//
// ACTION_TEMPLATE(ActionName,
// HAS_m_TEMPLATE_PARAMS(kind1, name1, ..., kind_m, name_m),
// AND_n_VALUE_PARAMS(p1, ..., p_n)) { statements; }
//
// defines an action template that takes m explicit template
// parameters and n value parameters. name_i is the name of the i-th
// template parameter, and kind_i specifies whether it's a typename,
// an integral constant, or a template. p_i is the name of the i-th
// value parameter.
//
// Example:
//
// // DuplicateArg<k, T>(output) converts the k-th argument of the mock
// // function to type T and copies it to *output.
// ACTION_TEMPLATE(DuplicateArg,
// HAS_2_TEMPLATE_PARAMS(int, k, typename, T),
// AND_1_VALUE_PARAMS(output)) {
// *output = T(::std::get<k>(args));
// }
// ...
// int n;
// EXPECT_CALL(mock, Foo(_, _))
// .WillOnce(DuplicateArg<1, unsigned char>(&n));
//
// To create an instance of an action template, write:
//
// ActionName<t1, ..., t_m>(v1, ..., v_n)
//
// where the ts are the template arguments and the vs are the value
// arguments. The value argument types are inferred by the compiler.
// If you want to explicitly specify the value argument types, you can
// provide additional template arguments:
//
// ActionName<t1, ..., t_m, u1, ..., u_k>(v1, ..., v_n)
//
// where u_i is the desired type of v_i.
//
// ACTION_TEMPLATE and ACTION/ACTION_P* can be overloaded on the
// number of value parameters, but not on the number of template
// parameters. Without the restriction, the meaning of the following
// is unclear:
//
// OverloadedAction<int, bool>(x);
//
// Are we using a single-template-parameter action where 'bool' refers
// to the type of x, or are we using a two-template-parameter action
// where the compiler is asked to infer the type of x?
//
// Implementation notes:
//
// GMOCK_INTERNAL_*_HAS_m_TEMPLATE_PARAMS and
// GMOCK_INTERNAL_*_AND_n_VALUE_PARAMS are internal macros for
// implementing ACTION_TEMPLATE. The main trick we use is to create
// new macro invocations when expanding a macro. For example, we have
//
// #define ACTION_TEMPLATE(name, template_params, value_params)
// ... GMOCK_INTERNAL_DECL_##template_params ...
//
// which causes ACTION_TEMPLATE(..., HAS_1_TEMPLATE_PARAMS(typename, T), ...)
// to expand to
//
// ... GMOCK_INTERNAL_DECL_HAS_1_TEMPLATE_PARAMS(typename, T) ...
//
// Since GMOCK_INTERNAL_DECL_HAS_1_TEMPLATE_PARAMS is a macro, the
// preprocessor will continue to expand it to
//
// ... typename T ...
//
// This technique conforms to the C++ standard and is portable. It
// allows us to implement action templates using O(N) code, where N is
// the maximum number of template/value parameters supported. Without
// using it, we'd have to devote O(N^2) amount of code to implement all
// combinations of m and n.
// Declares the template parameters.
$range j 1..n
$for j [[
$range m 0..j-1
#define GMOCK_INTERNAL_DECL_HAS_$j[[]]
_TEMPLATE_PARAMS($for m, [[kind$m, name$m]]) $for m, [[kind$m name$m]]
]]
// Lists the template parameters.
$for j [[
$range m 0..j-1
#define GMOCK_INTERNAL_LIST_HAS_$j[[]]
_TEMPLATE_PARAMS($for m, [[kind$m, name$m]]) $for m, [[name$m]]
]]
// Declares the types of value parameters.
$for i [[
$range j 0..i-1
#define GMOCK_INTERNAL_DECL_TYPE_AND_$i[[]]
_VALUE_PARAMS($for j, [[p$j]]) $for j [[, typename p$j##_type]]
]]
// Initializes the value parameters.
$for i [[
$range j 0..i-1
#define GMOCK_INTERNAL_INIT_AND_$i[[]]_VALUE_PARAMS($for j, [[p$j]])\
($for j, [[p$j##_type gmock_p$j]])$if i>0 [[ : ]]$for j, [[p$j(::std::move(gmock_p$j))]]
]]
// Declares the fields for storing the value parameters.
$for i [[
$range j 0..i-1
#define GMOCK_INTERNAL_DEFN_AND_$i[[]]
_VALUE_PARAMS($for j, [[p$j]]) $for j [[p$j##_type p$j; ]]
]]
// Lists the value parameters.
$for i [[
$range j 0..i-1
#define GMOCK_INTERNAL_LIST_AND_$i[[]]
_VALUE_PARAMS($for j, [[p$j]]) $for j, [[p$j]]
]]
// Lists the value parameter types.
$for i [[
$range j 0..i-1
#define GMOCK_INTERNAL_LIST_TYPE_AND_$i[[]]
_VALUE_PARAMS($for j, [[p$j]]) $for j [[, p$j##_type]]
]]
// Declares the value parameters.
$for i [[
$range j 0..i-1
#define GMOCK_INTERNAL_DECL_AND_$i[[]]_VALUE_PARAMS($for j, [[p$j]]) [[]]
$for j, [[p$j##_type p$j]]
]]
// The suffix of the class template implementing the action template.
$for i [[
$range j 0..i-1
#define GMOCK_INTERNAL_COUNT_AND_$i[[]]_VALUE_PARAMS($for j, [[p$j]]) [[]]
$if i==1 [[P]] $elif i>=2 [[P$i]]
]]
// The name of the class template implementing the action template.
#define GMOCK_ACTION_CLASS_(name, value_params)\
GTEST_CONCAT_TOKEN_(name##Action, GMOCK_INTERNAL_COUNT_##value_params)
$range k 0..n-1
#define ACTION_TEMPLATE(name, template_params, value_params)\
template <GMOCK_INTERNAL_DECL_##template_params\
GMOCK_INTERNAL_DECL_TYPE_##value_params>\
class GMOCK_ACTION_CLASS_(name, value_params) {\
public:\
explicit GMOCK_ACTION_CLASS_(name, value_params)\
GMOCK_INTERNAL_INIT_##value_params {}\
template <typename F>\
class gmock_Impl : public ::testing::ActionInterface<F> {\
public:\
typedef F function_type;\
typedef typename ::testing::internal::Function<F>::Result return_type;\
typedef typename ::testing::internal::Function<F>::ArgumentTuple\
args_type;\
explicit gmock_Impl GMOCK_INTERNAL_INIT_##value_params {}\
virtual return_type Perform(const args_type& args) {\
return ::testing::internal::ActionHelper<return_type, gmock_Impl>::\
Perform(this, args);\
}\
template <$for k, [[typename arg$k[[]]_type]]>\
return_type gmock_PerformImpl(const args_type& args[[]]
$for k [[, const arg$k[[]]_type& arg$k]]) const;\
GMOCK_INTERNAL_DEFN_##value_params\
private:\
GTEST_DISALLOW_ASSIGN_(gmock_Impl);\
};\
template <typename F> operator ::testing::Action<F>() const {\
return ::testing::Action<F>(\
new gmock_Impl<F>(GMOCK_INTERNAL_LIST_##value_params));\
}\
GMOCK_INTERNAL_DEFN_##value_params\
private:\
GTEST_DISALLOW_ASSIGN_(GMOCK_ACTION_CLASS_(name, value_params));\
};\
template <GMOCK_INTERNAL_DECL_##template_params\
GMOCK_INTERNAL_DECL_TYPE_##value_params>\
inline GMOCK_ACTION_CLASS_(name, value_params)<\
GMOCK_INTERNAL_LIST_##template_params\
GMOCK_INTERNAL_LIST_TYPE_##value_params> name(\
GMOCK_INTERNAL_DECL_##value_params) {\
return GMOCK_ACTION_CLASS_(name, value_params)<\
GMOCK_INTERNAL_LIST_##template_params\
GMOCK_INTERNAL_LIST_TYPE_##value_params>(\
GMOCK_INTERNAL_LIST_##value_params);\
}\
template <GMOCK_INTERNAL_DECL_##template_params\
GMOCK_INTERNAL_DECL_TYPE_##value_params>\
template <typename F>\
template <typename arg0_type, typename arg1_type, typename arg2_type, \
typename arg3_type, typename arg4_type, typename arg5_type, \
typename arg6_type, typename arg7_type, typename arg8_type, \
typename arg9_type>\
typename ::testing::internal::Function<F>::Result\
GMOCK_ACTION_CLASS_(name, value_params)<\
GMOCK_INTERNAL_LIST_##template_params\
GMOCK_INTERNAL_LIST_TYPE_##value_params>::gmock_Impl<F>::\
gmock_PerformImpl(\
GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const
$for i
[[
$var template = [[$if i==0 [[]] $else [[
$range j 0..i-1
template <$for j, [[typename p$j##_type]]>\
]]]]
$var class_name = [[name##Action[[$if i==0 [[]] $elif i==1 [[P]]
$else [[P$i]]]]]]
$range j 0..i-1
$var ctor_param_list = [[$for j, [[p$j##_type gmock_p$j]]]]
$var param_types_and_names = [[$for j, [[p$j##_type p$j]]]]
$var inits = [[$if i==0 [[]] $else [[ : $for j, [[p$j(::std::forward<p$j##_type>(gmock_p$j))]]]]]]
$var param_field_decls = [[$for j
[[
p$j##_type p$j;\
]]]]
$var param_field_decls2 = [[$for j
[[
p$j##_type p$j;\
]]]]
$var params = [[$for j, [[p$j]]]]
$var param_types = [[$if i==0 [[]] $else [[<$for j, [[p$j##_type]]>]]]]
$var typename_arg_types = [[$for k, [[typename arg$k[[]]_type]]]]
$var arg_types_and_names = [[$for k, [[const arg$k[[]]_type& arg$k]]]]
$var macro_name = [[$if i==0 [[ACTION]] $elif i==1 [[ACTION_P]]
$else [[ACTION_P$i]]]]
#define $macro_name(name$for j [[, p$j]])\$template
class $class_name {\
public:\
[[$if i==1 [[explicit ]]]]$class_name($ctor_param_list)$inits {}\
template <typename F>\
class gmock_Impl : public ::testing::ActionInterface<F> {\
public:\
typedef F function_type;\
typedef typename ::testing::internal::Function<F>::Result return_type;\
typedef typename ::testing::internal::Function<F>::ArgumentTuple\
args_type;\
[[$if i==1 [[explicit ]]]]gmock_Impl($ctor_param_list)$inits {}\
virtual return_type Perform(const args_type& args) {\
return ::testing::internal::ActionHelper<return_type, gmock_Impl>::\
Perform(this, args);\
}\
template <$typename_arg_types>\
return_type gmock_PerformImpl(const args_type& args, [[]]
$arg_types_and_names) const;\$param_field_decls
private:\
GTEST_DISALLOW_ASSIGN_(gmock_Impl);\
};\
template <typename F> operator ::testing::Action<F>() const {\
return ::testing::Action<F>(new gmock_Impl<F>($params));\
}\$param_field_decls2
private:\
GTEST_DISALLOW_ASSIGN_($class_name);\
};\$template
inline $class_name$param_types name($param_types_and_names) {\
return $class_name$param_types($params);\
}\$template
template <typename F>\
template <$typename_arg_types>\
typename ::testing::internal::Function<F>::Result\
$class_name$param_types::gmock_Impl<F>::gmock_PerformImpl(\
GMOCK_ACTION_ARG_TYPES_AND_NAMES_UNUSED_) const
]]
$$ } // This meta comment fixes auto-indentation in Emacs. It won't
$$ // show up in the generated code.
namespace testing {
// The ACTION*() macros trigger warning C4100 (unreferenced formal
// parameter) in MSVC with -W4. Unfortunately they cannot be fixed in
// the macro definition, as the warnings are generated when the macro
// is expanded and macro expansion cannot contain #pragma. Therefore
// we suppress them here.
#ifdef _MSC_VER
# pragma warning(push)
# pragma warning(disable:4100)
#endif
// Various overloads for InvokeArgument<N>().
//
// The InvokeArgument<N>(a1, a2, ..., a_k) action invokes the N-th
// (0-based) argument, which must be a k-ary callable, of the mock
// function, with arguments a1, a2, ..., a_k.
//
// Notes:
//
// 1. The arguments are passed by value by default. If you need to
// pass an argument by reference, wrap it inside ByRef(). For
// example,
//
// InvokeArgument<1>(5, string("Hello"), ByRef(foo))
//
// passes 5 and string("Hello") by value, and passes foo by
// reference.
//
// 2. If the callable takes an argument by reference but ByRef() is
// not used, it will receive the reference to a copy of the value,
// instead of the original value. For example, when the 0-th
// argument of the mock function takes a const string&, the action
//
// InvokeArgument<0>(string("Hello"))
//
// makes a copy of the temporary string("Hello") object and passes a
// reference of the copy, instead of the original temporary object,
// to the callable. This makes it easy for a user to define an
// InvokeArgument action from temporary values and have it performed
// later.
namespace internal {
namespace invoke_argument {
// Appears in InvokeArgumentAdl's argument list to help avoid
// accidental calls to user functions of the same name.
struct AdlTag {};
// InvokeArgumentAdl - a helper for InvokeArgument.
// The basic overloads are provided here for generic functors.
// Overloads for other custom-callables are provided in the
// internal/custom/callback-actions.h header.
$range i 0..n
$for i
[[
$range j 1..i
template <typename R, typename F[[$for j [[, typename A$j]]]]>
R InvokeArgumentAdl(AdlTag, F f[[$for j [[, A$j a$j]]]]) {
return f([[$for j, [[a$j]]]]);
}
]]
} // namespace invoke_argument
} // namespace internal
$range i 0..n
$for i [[
$range j 0..i-1
ACTION_TEMPLATE(InvokeArgument,
HAS_1_TEMPLATE_PARAMS(int, k),
AND_$i[[]]_VALUE_PARAMS($for j, [[p$j]])) {
using internal::invoke_argument::InvokeArgumentAdl;
return InvokeArgumentAdl<return_type>(
internal::invoke_argument::AdlTag(),
::std::get<k>(args)$for j [[, p$j]]);
}
]]
// Various overloads for ReturnNew<T>().
//
// The ReturnNew<T>(a1, a2, ..., a_k) action returns a pointer to a new
// instance of type T, constructed on the heap with constructor arguments
// a1, a2, ..., and a_k. The caller assumes ownership of the returned value.
$range i 0..n
$for i [[
$range j 0..i-1
$var ps = [[$for j, [[p$j]]]]
ACTION_TEMPLATE(ReturnNew,
HAS_1_TEMPLATE_PARAMS(typename, T),
AND_$i[[]]_VALUE_PARAMS($ps)) {
return new T($ps);
}
]]
#ifdef _MSC_VER
# pragma warning(pop)
#endif
} // namespace testing
// Include any custom callback actions added by the local installation.
// We must include this header at the end to make sure it can use the
// declarations from this file.
#include "gmock/internal/custom/gmock-generated-actions.h"
#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_ACTIONS_H_

@ -0,0 +1,752 @@
// This file was GENERATED by command:
// pump.py gmock-generated-function-mockers.h.pump
// DO NOT EDIT BY HAND!!!
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements function mockers of various arities.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_
#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_
#include <functional>
#include <utility>
#include "gmock/gmock-spec-builders.h"
#include "gmock/internal/gmock-internal-utils.h"
namespace testing {
namespace internal {
// Removes the given pointer; this is a helper for the expectation setter method
// for parameterless matchers.
//
// We want to make sure that the user cannot set a parameterless expectation on
// overloaded methods, including methods which are overloaded on const. Example:
//
// class MockClass {
// MOCK_METHOD0(GetName, string&());
// MOCK_CONST_METHOD0(GetName, const string&());
// };
//
// TEST() {
// // This should be an error, as it's not clear which overload is expected.
// EXPECT_CALL(mock, GetName).WillOnce(ReturnRef(value));
// }
//
// Here are the generated expectation-setter methods:
//
// class MockClass {
// // Overload 1
// MockSpec<string&()> gmock_GetName() { ... }
// // Overload 2. Declared const so that the compiler will generate an
// // error when trying to resolve between this and overload 4 in
// // 'gmock_GetName(WithoutMatchers(), nullptr)'.
// MockSpec<string&()> gmock_GetName(
// const WithoutMatchers&, const Function<string&()>*) const {
// // Removes const from this, calls overload 1
// return AdjustConstness_(this)->gmock_GetName();
// }
//
// // Overload 3
// const string& gmock_GetName() const { ... }
// // Overload 4
// MockSpec<const string&()> gmock_GetName(
// const WithoutMatchers&, const Function<const string&()>*) const {
// // Does not remove const, calls overload 3
// return AdjustConstness_const(this)->gmock_GetName();
// }
// }
//
template <typename MockType>
const MockType* AdjustConstness_const(const MockType* mock) {
return mock;
}
// Removes const from and returns the given pointer; this is a helper for the
// expectation setter method for parameterless matchers.
template <typename MockType>
MockType* AdjustConstness_(const MockType* mock) {
return const_cast<MockType*>(mock);
}
} // namespace internal
// The style guide prohibits "using" statements in a namespace scope
// inside a header file. However, the FunctionMocker class template
// is meant to be defined in the ::testing namespace. The following
// line is just a trick for working around a bug in MSVC 8.0, which
// cannot handle it if we define FunctionMocker in ::testing.
using internal::FunctionMocker;
// GMOCK_RESULT_(tn, F) expands to the result type of function type F.
// We define this as a variadic macro in case F contains unprotected
// commas (the same reason that we use variadic macros in other places
// in this file).
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_RESULT_(tn, ...) \
tn ::testing::internal::Function<__VA_ARGS__>::Result
// The type of argument N of the given function type.
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_ARG_(tn, N, ...) \
tn ::testing::internal::Function<__VA_ARGS__>::template Arg<N-1>::type
// The matcher type for argument N of the given function type.
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_MATCHER_(tn, N, ...) \
const ::testing::Matcher<GMOCK_ARG_(tn, N, __VA_ARGS__)>&
// The variable for mocking the given method.
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_MOCKER_(arity, constness, Method) \
GTEST_CONCAT_TOKEN_(gmock##constness##arity##_##Method##_, __LINE__)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD0_(tn, constness, ct, Method, ...) \
static_assert(0 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
) constness { \
GMOCK_MOCKER_(0, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(0, constness, Method).Invoke(); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method() constness { \
GMOCK_MOCKER_(0, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(0, constness, Method).With(); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(0, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD1_(tn, constness, ct, Method, ...) \
static_assert(1 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1) constness { \
GMOCK_MOCKER_(1, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(1, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1) constness { \
GMOCK_MOCKER_(1, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(1, constness, Method).With(gmock_a1); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(1, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD2_(tn, constness, ct, Method, ...) \
static_assert(2 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2) constness { \
GMOCK_MOCKER_(2, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(2, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2) constness { \
GMOCK_MOCKER_(2, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(2, constness, Method).With(gmock_a1, gmock_a2); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(2, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD3_(tn, constness, ct, Method, ...) \
static_assert(3 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2, GMOCK_ARG_(tn, 3, \
__VA_ARGS__) gmock_a3) constness { \
GMOCK_MOCKER_(3, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(3, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2), \
::std::forward<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(gmock_a3)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \
GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3) constness { \
GMOCK_MOCKER_(3, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(3, constness, Method).With(gmock_a1, gmock_a2, \
gmock_a3); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 3, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(3, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD4_(tn, constness, ct, Method, ...) \
static_assert(4 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2, GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4) constness { \
GMOCK_MOCKER_(4, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(4, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2), \
::std::forward<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(gmock_a3), \
::std::forward<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(gmock_a4)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \
GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4) constness { \
GMOCK_MOCKER_(4, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(4, constness, Method).With(gmock_a1, gmock_a2, \
gmock_a3, gmock_a4); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 4, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(4, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD5_(tn, constness, ct, Method, ...) \
static_assert(5 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2, GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, GMOCK_ARG_(tn, 5, \
__VA_ARGS__) gmock_a5) constness { \
GMOCK_MOCKER_(5, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(5, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2), \
::std::forward<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(gmock_a3), \
::std::forward<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(gmock_a4), \
::std::forward<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(gmock_a5)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \
GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \
GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5) constness { \
GMOCK_MOCKER_(5, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(5, constness, Method).With(gmock_a1, gmock_a2, \
gmock_a3, gmock_a4, gmock_a5); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 5, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(5, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD6_(tn, constness, ct, Method, ...) \
static_assert(6 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2, GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, GMOCK_ARG_(tn, 5, \
__VA_ARGS__) gmock_a5, GMOCK_ARG_(tn, 6, \
__VA_ARGS__) gmock_a6) constness { \
GMOCK_MOCKER_(6, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(6, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2), \
::std::forward<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(gmock_a3), \
::std::forward<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(gmock_a4), \
::std::forward<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(gmock_a5), \
::std::forward<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(gmock_a6)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \
GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \
GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \
GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6) constness { \
GMOCK_MOCKER_(6, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(6, constness, Method).With(gmock_a1, gmock_a2, \
gmock_a3, gmock_a4, gmock_a5, gmock_a6); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 6, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(6, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD7_(tn, constness, ct, Method, ...) \
static_assert(7 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2, GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, GMOCK_ARG_(tn, 5, \
__VA_ARGS__) gmock_a5, GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6, \
GMOCK_ARG_(tn, 7, __VA_ARGS__) gmock_a7) constness { \
GMOCK_MOCKER_(7, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(7, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2), \
::std::forward<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(gmock_a3), \
::std::forward<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(gmock_a4), \
::std::forward<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(gmock_a5), \
::std::forward<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(gmock_a6), \
::std::forward<GMOCK_ARG_(tn, 7, __VA_ARGS__)>(gmock_a7)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \
GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \
GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \
GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6, \
GMOCK_MATCHER_(tn, 7, __VA_ARGS__) gmock_a7) constness { \
GMOCK_MOCKER_(7, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(7, constness, Method).With(gmock_a1, gmock_a2, \
gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 7, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(7, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD8_(tn, constness, ct, Method, ...) \
static_assert(8 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2, GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, GMOCK_ARG_(tn, 5, \
__VA_ARGS__) gmock_a5, GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6, \
GMOCK_ARG_(tn, 7, __VA_ARGS__) gmock_a7, GMOCK_ARG_(tn, 8, \
__VA_ARGS__) gmock_a8) constness { \
GMOCK_MOCKER_(8, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(8, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2), \
::std::forward<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(gmock_a3), \
::std::forward<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(gmock_a4), \
::std::forward<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(gmock_a5), \
::std::forward<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(gmock_a6), \
::std::forward<GMOCK_ARG_(tn, 7, __VA_ARGS__)>(gmock_a7), \
::std::forward<GMOCK_ARG_(tn, 8, __VA_ARGS__)>(gmock_a8)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \
GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \
GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \
GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6, \
GMOCK_MATCHER_(tn, 7, __VA_ARGS__) gmock_a7, \
GMOCK_MATCHER_(tn, 8, __VA_ARGS__) gmock_a8) constness { \
GMOCK_MOCKER_(8, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(8, constness, Method).With(gmock_a1, gmock_a2, \
gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 7, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 8, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(8, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD9_(tn, constness, ct, Method, ...) \
static_assert(9 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2, GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, GMOCK_ARG_(tn, 5, \
__VA_ARGS__) gmock_a5, GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6, \
GMOCK_ARG_(tn, 7, __VA_ARGS__) gmock_a7, GMOCK_ARG_(tn, 8, \
__VA_ARGS__) gmock_a8, GMOCK_ARG_(tn, 9, \
__VA_ARGS__) gmock_a9) constness { \
GMOCK_MOCKER_(9, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(9, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2), \
::std::forward<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(gmock_a3), \
::std::forward<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(gmock_a4), \
::std::forward<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(gmock_a5), \
::std::forward<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(gmock_a6), \
::std::forward<GMOCK_ARG_(tn, 7, __VA_ARGS__)>(gmock_a7), \
::std::forward<GMOCK_ARG_(tn, 8, __VA_ARGS__)>(gmock_a8), \
::std::forward<GMOCK_ARG_(tn, 9, __VA_ARGS__)>(gmock_a9)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \
GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \
GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \
GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6, \
GMOCK_MATCHER_(tn, 7, __VA_ARGS__) gmock_a7, \
GMOCK_MATCHER_(tn, 8, __VA_ARGS__) gmock_a8, \
GMOCK_MATCHER_(tn, 9, __VA_ARGS__) gmock_a9) constness { \
GMOCK_MOCKER_(9, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(9, constness, Method).With(gmock_a1, gmock_a2, \
gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8, \
gmock_a9); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 7, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 8, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 9, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(9, constness, \
Method)
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD10_(tn, constness, ct, Method, ...) \
static_assert(10 == \
::testing::internal::Function<__VA_ARGS__>::ArgumentCount, \
"MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
GMOCK_ARG_(tn, 1, __VA_ARGS__) gmock_a1, GMOCK_ARG_(tn, 2, \
__VA_ARGS__) gmock_a2, GMOCK_ARG_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_ARG_(tn, 4, __VA_ARGS__) gmock_a4, GMOCK_ARG_(tn, 5, \
__VA_ARGS__) gmock_a5, GMOCK_ARG_(tn, 6, __VA_ARGS__) gmock_a6, \
GMOCK_ARG_(tn, 7, __VA_ARGS__) gmock_a7, GMOCK_ARG_(tn, 8, \
__VA_ARGS__) gmock_a8, GMOCK_ARG_(tn, 9, __VA_ARGS__) gmock_a9, \
GMOCK_ARG_(tn, 10, __VA_ARGS__) gmock_a10) constness { \
GMOCK_MOCKER_(10, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_(10, constness, \
Method).Invoke(::std::forward<GMOCK_ARG_(tn, 1, \
__VA_ARGS__)>(gmock_a1), \
::std::forward<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(gmock_a2), \
::std::forward<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(gmock_a3), \
::std::forward<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(gmock_a4), \
::std::forward<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(gmock_a5), \
::std::forward<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(gmock_a6), \
::std::forward<GMOCK_ARG_(tn, 7, __VA_ARGS__)>(gmock_a7), \
::std::forward<GMOCK_ARG_(tn, 8, __VA_ARGS__)>(gmock_a8), \
::std::forward<GMOCK_ARG_(tn, 9, __VA_ARGS__)>(gmock_a9), \
::std::forward<GMOCK_ARG_(tn, 10, __VA_ARGS__)>(gmock_a10)); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method(GMOCK_MATCHER_(tn, 1, __VA_ARGS__) gmock_a1, \
GMOCK_MATCHER_(tn, 2, __VA_ARGS__) gmock_a2, \
GMOCK_MATCHER_(tn, 3, __VA_ARGS__) gmock_a3, \
GMOCK_MATCHER_(tn, 4, __VA_ARGS__) gmock_a4, \
GMOCK_MATCHER_(tn, 5, __VA_ARGS__) gmock_a5, \
GMOCK_MATCHER_(tn, 6, __VA_ARGS__) gmock_a6, \
GMOCK_MATCHER_(tn, 7, __VA_ARGS__) gmock_a7, \
GMOCK_MATCHER_(tn, 8, __VA_ARGS__) gmock_a8, \
GMOCK_MATCHER_(tn, 9, __VA_ARGS__) gmock_a9, \
GMOCK_MATCHER_(tn, 10, \
__VA_ARGS__) gmock_a10) constness { \
GMOCK_MOCKER_(10, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_(10, constness, Method).With(gmock_a1, gmock_a2, \
gmock_a3, gmock_a4, gmock_a5, gmock_a6, gmock_a7, gmock_a8, gmock_a9, \
gmock_a10); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method(::testing::A<GMOCK_ARG_(tn, 1, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 2, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 3, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 4, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 5, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 6, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 7, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 8, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 9, __VA_ARGS__)>(), \
::testing::A<GMOCK_ARG_(tn, 10, __VA_ARGS__)>()); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_(10, constness, \
Method)
#define MOCK_METHOD0(m, ...) GMOCK_METHOD0_(, , , m, __VA_ARGS__)
#define MOCK_METHOD1(m, ...) GMOCK_METHOD1_(, , , m, __VA_ARGS__)
#define MOCK_METHOD2(m, ...) GMOCK_METHOD2_(, , , m, __VA_ARGS__)
#define MOCK_METHOD3(m, ...) GMOCK_METHOD3_(, , , m, __VA_ARGS__)
#define MOCK_METHOD4(m, ...) GMOCK_METHOD4_(, , , m, __VA_ARGS__)
#define MOCK_METHOD5(m, ...) GMOCK_METHOD5_(, , , m, __VA_ARGS__)
#define MOCK_METHOD6(m, ...) GMOCK_METHOD6_(, , , m, __VA_ARGS__)
#define MOCK_METHOD7(m, ...) GMOCK_METHOD7_(, , , m, __VA_ARGS__)
#define MOCK_METHOD8(m, ...) GMOCK_METHOD8_(, , , m, __VA_ARGS__)
#define MOCK_METHOD9(m, ...) GMOCK_METHOD9_(, , , m, __VA_ARGS__)
#define MOCK_METHOD10(m, ...) GMOCK_METHOD10_(, , , m, __VA_ARGS__)
#define MOCK_CONST_METHOD0(m, ...) GMOCK_METHOD0_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD1(m, ...) GMOCK_METHOD1_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD2(m, ...) GMOCK_METHOD2_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD3(m, ...) GMOCK_METHOD3_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD4(m, ...) GMOCK_METHOD4_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD5(m, ...) GMOCK_METHOD5_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD6(m, ...) GMOCK_METHOD6_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD7(m, ...) GMOCK_METHOD7_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD8(m, ...) GMOCK_METHOD8_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD9(m, ...) GMOCK_METHOD9_(, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD10(m, ...) GMOCK_METHOD10_(, const, , m, __VA_ARGS__)
#define MOCK_METHOD0_T(m, ...) GMOCK_METHOD0_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD1_T(m, ...) GMOCK_METHOD1_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD2_T(m, ...) GMOCK_METHOD2_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD3_T(m, ...) GMOCK_METHOD3_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD4_T(m, ...) GMOCK_METHOD4_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD5_T(m, ...) GMOCK_METHOD5_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD6_T(m, ...) GMOCK_METHOD6_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD7_T(m, ...) GMOCK_METHOD7_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD8_T(m, ...) GMOCK_METHOD8_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD9_T(m, ...) GMOCK_METHOD9_(typename, , , m, __VA_ARGS__)
#define MOCK_METHOD10_T(m, ...) GMOCK_METHOD10_(typename, , , m, __VA_ARGS__)
#define MOCK_CONST_METHOD0_T(m, ...) \
GMOCK_METHOD0_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD1_T(m, ...) \
GMOCK_METHOD1_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD2_T(m, ...) \
GMOCK_METHOD2_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD3_T(m, ...) \
GMOCK_METHOD3_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD4_T(m, ...) \
GMOCK_METHOD4_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD5_T(m, ...) \
GMOCK_METHOD5_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD6_T(m, ...) \
GMOCK_METHOD6_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD7_T(m, ...) \
GMOCK_METHOD7_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD8_T(m, ...) \
GMOCK_METHOD8_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD9_T(m, ...) \
GMOCK_METHOD9_(typename, const, , m, __VA_ARGS__)
#define MOCK_CONST_METHOD10_T(m, ...) \
GMOCK_METHOD10_(typename, const, , m, __VA_ARGS__)
#define MOCK_METHOD0_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD0_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD1_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD1_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD2_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD2_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD3_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD3_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD4_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD4_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD5_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD5_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD6_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD6_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD7_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD7_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD8_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD8_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD9_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD9_(, , ct, m, __VA_ARGS__)
#define MOCK_METHOD10_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD10_(, , ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD0_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD0_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD1_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD1_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD2_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD2_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD3_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD3_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD4_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD4_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD5_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD5_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD6_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD6_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD7_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD7_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD8_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD8_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD9_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD9_(, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD10_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD10_(, const, ct, m, __VA_ARGS__)
#define MOCK_METHOD0_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD0_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD1_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD1_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD2_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD2_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD3_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD3_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD4_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD4_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD5_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD5_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD6_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD6_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD7_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD7_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD8_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD8_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD9_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD9_(typename, , ct, m, __VA_ARGS__)
#define MOCK_METHOD10_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD10_(typename, , ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD0_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD0_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD1_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD1_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD2_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD2_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD3_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD3_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD4_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD4_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD5_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD5_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD6_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD6_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD7_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD7_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD8_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD8_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD9_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD9_(typename, const, ct, m, __VA_ARGS__)
#define MOCK_CONST_METHOD10_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD10_(typename, const, ct, m, __VA_ARGS__)
} // namespace testing
#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_

@ -0,0 +1,227 @@
$$ -*- mode: c++; -*-
$$ This is a Pump source file. Please use Pump to convert
$$ it to gmock-generated-function-mockers.h.
$$
$var n = 10 $$ The maximum arity we support.
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements function mockers of various arities.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_
#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_
#include <functional>
#include <utility>
#include "gmock/gmock-spec-builders.h"
#include "gmock/internal/gmock-internal-utils.h"
namespace testing {
namespace internal {
$range i 0..n
// Removes the given pointer; this is a helper for the expectation setter method
// for parameterless matchers.
//
// We want to make sure that the user cannot set a parameterless expectation on
// overloaded methods, including methods which are overloaded on const. Example:
//
// class MockClass {
// MOCK_METHOD0(GetName, string&());
// MOCK_CONST_METHOD0(GetName, const string&());
// };
//
// TEST() {
// // This should be an error, as it's not clear which overload is expected.
// EXPECT_CALL(mock, GetName).WillOnce(ReturnRef(value));
// }
//
// Here are the generated expectation-setter methods:
//
// class MockClass {
// // Overload 1
// MockSpec<string&()> gmock_GetName() { ... }
// // Overload 2. Declared const so that the compiler will generate an
// // error when trying to resolve between this and overload 4 in
// // 'gmock_GetName(WithoutMatchers(), nullptr)'.
// MockSpec<string&()> gmock_GetName(
// const WithoutMatchers&, const Function<string&()>*) const {
// // Removes const from this, calls overload 1
// return AdjustConstness_(this)->gmock_GetName();
// }
//
// // Overload 3
// const string& gmock_GetName() const { ... }
// // Overload 4
// MockSpec<const string&()> gmock_GetName(
// const WithoutMatchers&, const Function<const string&()>*) const {
// // Does not remove const, calls overload 3
// return AdjustConstness_const(this)->gmock_GetName();
// }
// }
//
template <typename MockType>
const MockType* AdjustConstness_const(const MockType* mock) {
return mock;
}
// Removes const from and returns the given pointer; this is a helper for the
// expectation setter method for parameterless matchers.
template <typename MockType>
MockType* AdjustConstness_(const MockType* mock) {
return const_cast<MockType*>(mock);
}
} // namespace internal
// The style guide prohibits "using" statements in a namespace scope
// inside a header file. However, the FunctionMocker class template
// is meant to be defined in the ::testing namespace. The following
// line is just a trick for working around a bug in MSVC 8.0, which
// cannot handle it if we define FunctionMocker in ::testing.
using internal::FunctionMocker;
// GMOCK_RESULT_(tn, F) expands to the result type of function type F.
// We define this as a variadic macro in case F contains unprotected
// commas (the same reason that we use variadic macros in other places
// in this file).
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_RESULT_(tn, ...) \
tn ::testing::internal::Function<__VA_ARGS__>::Result
// The type of argument N of the given function type.
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_ARG_(tn, N, ...) \
tn ::testing::internal::Function<__VA_ARGS__>::template Arg<N-1>::type
// The matcher type for argument N of the given function type.
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_MATCHER_(tn, N, ...) \
const ::testing::Matcher<GMOCK_ARG_(tn, N, __VA_ARGS__)>&
// The variable for mocking the given method.
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_MOCKER_(arity, constness, Method) \
GTEST_CONCAT_TOKEN_(gmock##constness##arity##_##Method##_, __LINE__)
$for i [[
$range j 1..i
$var arg_as = [[$for j, [[GMOCK_ARG_(tn, $j, __VA_ARGS__) gmock_a$j]]]]
$var as = [[$for j, \
[[::std::forward<GMOCK_ARG_(tn, $j, __VA_ARGS__)>(gmock_a$j)]]]]
$var matcher_arg_as = [[$for j, \
[[GMOCK_MATCHER_(tn, $j, __VA_ARGS__) gmock_a$j]]]]
$var matcher_as = [[$for j, [[gmock_a$j]]]]
$var anything_matchers = [[$for j, \
[[::testing::A<GMOCK_ARG_(tn, $j, __VA_ARGS__)>()]]]]
// INTERNAL IMPLEMENTATION - DON'T USE IN USER CODE!!!
#define GMOCK_METHOD$i[[]]_(tn, constness, ct, Method, ...) \
static_assert($i == ::testing::internal::Function<__VA_ARGS__>::ArgumentCount, "MOCK_METHOD<N> must match argument count.");\
GMOCK_RESULT_(tn, __VA_ARGS__) ct Method( \
$arg_as) constness { \
GMOCK_MOCKER_($i, constness, Method).SetOwnerAndName(this, #Method); \
return GMOCK_MOCKER_($i, constness, Method).Invoke($as); \
} \
::testing::MockSpec<__VA_ARGS__> \
gmock_##Method($matcher_arg_as) constness { \
GMOCK_MOCKER_($i, constness, Method).RegisterOwner(this); \
return GMOCK_MOCKER_($i, constness, Method).With($matcher_as); \
} \
::testing::MockSpec<__VA_ARGS__> gmock_##Method( \
const ::testing::internal::WithoutMatchers&, \
constness ::testing::internal::Function<__VA_ARGS__>* ) const { \
return ::testing::internal::AdjustConstness_##constness(this)-> \
gmock_##Method($anything_matchers); \
} \
mutable ::testing::FunctionMocker<__VA_ARGS__> GMOCK_MOCKER_($i, constness, Method)
]]
$for i [[
#define MOCK_METHOD$i(m, ...) GMOCK_METHOD$i[[]]_(, , , m, __VA_ARGS__)
]]
$for i [[
#define MOCK_CONST_METHOD$i(m, ...) GMOCK_METHOD$i[[]]_(, const, , m, __VA_ARGS__)
]]
$for i [[
#define MOCK_METHOD$i[[]]_T(m, ...) GMOCK_METHOD$i[[]]_(typename, , , m, __VA_ARGS__)
]]
$for i [[
#define MOCK_CONST_METHOD$i[[]]_T(m, ...) \
GMOCK_METHOD$i[[]]_(typename, const, , m, __VA_ARGS__)
]]
$for i [[
#define MOCK_METHOD$i[[]]_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD$i[[]]_(, , ct, m, __VA_ARGS__)
]]
$for i [[
#define MOCK_CONST_METHOD$i[[]]_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD$i[[]]_(, const, ct, m, __VA_ARGS__)
]]
$for i [[
#define MOCK_METHOD$i[[]]_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD$i[[]]_(typename, , ct, m, __VA_ARGS__)
]]
$for i [[
#define MOCK_CONST_METHOD$i[[]]_T_WITH_CALLTYPE(ct, m, ...) \
GMOCK_METHOD$i[[]]_(typename, const, ct, m, __VA_ARGS__)
]]
} // namespace testing
#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_FUNCTION_MOCKERS_H_

@ -0,0 +1,346 @@
$$ -*- mode: c++; -*-
$$ This is a Pump source file. Please use Pump to convert
$$ it to gmock-generated-matchers.h.
$$
$var n = 10 $$ The maximum arity we support.
$$ }} This line fixes auto-indentation of the following code in Emacs.
// Copyright 2008, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements some commonly used variadic matchers.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_
#define GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_
#include <iterator>
#include <sstream>
#include <string>
#include <utility>
#include <vector>
#include "gmock/gmock-matchers.h"
// The MATCHER* family of macros can be used in a namespace scope to
// define custom matchers easily.
//
// Basic Usage
// ===========
//
// The syntax
//
// MATCHER(name, description_string) { statements; }
//
// defines a matcher with the given name that executes the statements,
// which must return a bool to indicate if the match succeeds. Inside
// the statements, you can refer to the value being matched by 'arg',
// and refer to its type by 'arg_type'.
//
// The description string documents what the matcher does, and is used
// to generate the failure message when the match fails. Since a
// MATCHER() is usually defined in a header file shared by multiple
// C++ source files, we require the description to be a C-string
// literal to avoid possible side effects. It can be empty, in which
// case we'll use the sequence of words in the matcher name as the
// description.
//
// For example:
//
// MATCHER(IsEven, "") { return (arg % 2) == 0; }
//
// allows you to write
//
// // Expects mock_foo.Bar(n) to be called where n is even.
// EXPECT_CALL(mock_foo, Bar(IsEven()));
//
// or,
//
// // Verifies that the value of some_expression is even.
// EXPECT_THAT(some_expression, IsEven());
//
// If the above assertion fails, it will print something like:
//
// Value of: some_expression
// Expected: is even
// Actual: 7
//
// where the description "is even" is automatically calculated from the
// matcher name IsEven.
//
// Argument Type
// =============
//
// Note that the type of the value being matched (arg_type) is
// determined by the context in which you use the matcher and is
// supplied to you by the compiler, so you don't need to worry about
// declaring it (nor can you). This allows the matcher to be
// polymorphic. For example, IsEven() can be used to match any type
// where the value of "(arg % 2) == 0" can be implicitly converted to
// a bool. In the "Bar(IsEven())" example above, if method Bar()
// takes an int, 'arg_type' will be int; if it takes an unsigned long,
// 'arg_type' will be unsigned long; and so on.
//
// Parameterizing Matchers
// =======================
//
// Sometimes you'll want to parameterize the matcher. For that you
// can use another macro:
//
// MATCHER_P(name, param_name, description_string) { statements; }
//
// For example:
//
// MATCHER_P(HasAbsoluteValue, value, "") { return abs(arg) == value; }
//
// will allow you to write:
//
// EXPECT_THAT(Blah("a"), HasAbsoluteValue(n));
//
// which may lead to this message (assuming n is 10):
//
// Value of: Blah("a")
// Expected: has absolute value 10
// Actual: -9
//
// Note that both the matcher description and its parameter are
// printed, making the message human-friendly.
//
// In the matcher definition body, you can write 'foo_type' to
// reference the type of a parameter named 'foo'. For example, in the
// body of MATCHER_P(HasAbsoluteValue, value) above, you can write
// 'value_type' to refer to the type of 'value'.
//
// We also provide MATCHER_P2, MATCHER_P3, ..., up to MATCHER_P$n to
// support multi-parameter matchers.
//
// Describing Parameterized Matchers
// =================================
//
// The last argument to MATCHER*() is a string-typed expression. The
// expression can reference all of the matcher's parameters and a
// special bool-typed variable named 'negation'. When 'negation' is
// false, the expression should evaluate to the matcher's description;
// otherwise it should evaluate to the description of the negation of
// the matcher. For example,
//
// using testing::PrintToString;
//
// MATCHER_P2(InClosedRange, low, hi,
// std::string(negation ? "is not" : "is") + " in range [" +
// PrintToString(low) + ", " + PrintToString(hi) + "]") {
// return low <= arg && arg <= hi;
// }
// ...
// EXPECT_THAT(3, InClosedRange(4, 6));
// EXPECT_THAT(3, Not(InClosedRange(2, 4)));
//
// would generate two failures that contain the text:
//
// Expected: is in range [4, 6]
// ...
// Expected: is not in range [2, 4]
//
// If you specify "" as the description, the failure message will
// contain the sequence of words in the matcher name followed by the
// parameter values printed as a tuple. For example,
//
// MATCHER_P2(InClosedRange, low, hi, "") { ... }
// ...
// EXPECT_THAT(3, InClosedRange(4, 6));
// EXPECT_THAT(3, Not(InClosedRange(2, 4)));
//
// would generate two failures that contain the text:
//
// Expected: in closed range (4, 6)
// ...
// Expected: not (in closed range (2, 4))
//
// Types of Matcher Parameters
// ===========================
//
// For the purpose of typing, you can view
//
// MATCHER_Pk(Foo, p1, ..., pk, description_string) { ... }
//
// as shorthand for
//
// template <typename p1_type, ..., typename pk_type>
// FooMatcherPk<p1_type, ..., pk_type>
// Foo(p1_type p1, ..., pk_type pk) { ... }
//
// When you write Foo(v1, ..., vk), the compiler infers the types of
// the parameters v1, ..., and vk for you. If you are not happy with
// the result of the type inference, you can specify the types by
// explicitly instantiating the template, as in Foo<long, bool>(5,
// false). As said earlier, you don't get to (or need to) specify
// 'arg_type' as that's determined by the context in which the matcher
// is used. You can assign the result of expression Foo(p1, ..., pk)
// to a variable of type FooMatcherPk<p1_type, ..., pk_type>. This
// can be useful when composing matchers.
//
// While you can instantiate a matcher template with reference types,
// passing the parameters by pointer usually makes your code more
// readable. If, however, you still want to pass a parameter by
// reference, be aware that in the failure message generated by the
// matcher you will see the value of the referenced object but not its
// address.
//
// Explaining Match Results
// ========================
//
// Sometimes the matcher description alone isn't enough to explain why
// the match has failed or succeeded. For example, when expecting a
// long string, it can be very helpful to also print the diff between
// the expected string and the actual one. To achieve that, you can
// optionally stream additional information to a special variable
// named result_listener, whose type is a pointer to class
// MatchResultListener:
//
// MATCHER_P(EqualsLongString, str, "") {
// if (arg == str) return true;
//
// *result_listener << "the difference: "
/// << DiffStrings(str, arg);
// return false;
// }
//
// Overloading Matchers
// ====================
//
// You can overload matchers with different numbers of parameters:
//
// MATCHER_P(Blah, a, description_string1) { ... }
// MATCHER_P2(Blah, a, b, description_string2) { ... }
//
// Caveats
// =======
//
// When defining a new matcher, you should also consider implementing
// MatcherInterface or using MakePolymorphicMatcher(). These
// approaches require more work than the MATCHER* macros, but also
// give you more control on the types of the value being matched and
// the matcher parameters, which may leads to better compiler error
// messages when the matcher is used wrong. They also allow
// overloading matchers based on parameter types (as opposed to just
// based on the number of parameters).
//
// MATCHER*() can only be used in a namespace scope as templates cannot be
// declared inside of a local class.
//
// More Information
// ================
//
// To learn more about using these macros, please search for 'MATCHER'
// on
// https://github.com/google/googletest/blob/master/googlemock/docs/cook_book.md
$range i 0..n
$for i
[[
$var macro_name = [[$if i==0 [[MATCHER]] $elif i==1 [[MATCHER_P]]
$else [[MATCHER_P$i]]]]
$var class_name = [[name##Matcher[[$if i==0 [[]] $elif i==1 [[P]]
$else [[P$i]]]]]]
$range j 0..i-1
$var template = [[$if i==0 [[]] $else [[
template <$for j, [[typename p$j##_type]]>\
]]]]
$var ctor_param_list = [[$for j, [[p$j##_type gmock_p$j]]]]
$var impl_ctor_param_list = [[$for j, [[p$j##_type gmock_p$j]]]]
$var impl_inits = [[$if i==0 [[]] $else [[ : $for j, [[p$j(::std::move(gmock_p$j))]]]]]]
$var inits = [[$if i==0 [[]] $else [[ : $for j, [[p$j(::std::move(gmock_p$j))]]]]]]
$var params = [[$for j, [[p$j]]]]
$var param_types = [[$if i==0 [[]] $else [[<$for j, [[p$j##_type]]>]]]]
$var param_types_and_names = [[$for j, [[p$j##_type p$j]]]]
$var param_field_decls = [[$for j
[[
p$j##_type const p$j;\
]]]]
$var param_field_decls2 = [[$for j
[[
p$j##_type const p$j;\
]]]]
#define $macro_name(name$for j [[, p$j]], description)\$template
class $class_name {\
public:\
template <typename arg_type>\
class gmock_Impl : public ::testing::MatcherInterface<\
GTEST_REFERENCE_TO_CONST_(arg_type)> {\
public:\
[[$if i==1 [[explicit ]]]]gmock_Impl($impl_ctor_param_list)\
$impl_inits {}\
virtual bool MatchAndExplain(\
GTEST_REFERENCE_TO_CONST_(arg_type) arg,\
::testing::MatchResultListener* result_listener) const;\
virtual void DescribeTo(::std::ostream* gmock_os) const {\
*gmock_os << FormatDescription(false);\
}\
virtual void DescribeNegationTo(::std::ostream* gmock_os) const {\
*gmock_os << FormatDescription(true);\
}\$param_field_decls
private:\
::std::string FormatDescription(bool negation) const {\
::std::string gmock_description = (description);\
if (!gmock_description.empty()) {\
return gmock_description;\
}\
return ::testing::internal::FormatMatcherDescription(\
negation, #name, \
::testing::internal::UniversalTersePrintTupleFieldsToStrings(\
::std::tuple<$for j, [[p$j##_type]]>($for j, [[p$j]])));\
}\
};\
template <typename arg_type>\
operator ::testing::Matcher<arg_type>() const {\
return ::testing::Matcher<arg_type>(\
new gmock_Impl<arg_type>($params));\
}\
[[$if i==1 [[explicit ]]]]$class_name($ctor_param_list)$inits {\
}\$param_field_decls2
private:\
};\$template
inline $class_name$param_types name($param_types_and_names) {\
return $class_name$param_types($params);\
}\$template
template <typename arg_type>\
bool $class_name$param_types::gmock_Impl<arg_type>::MatchAndExplain(\
GTEST_REFERENCE_TO_CONST_(arg_type) arg,\
::testing::MatchResultListener* result_listener GTEST_ATTRIBUTE_UNUSED_)\
const
]]
#endif // GMOCK_INCLUDE_GMOCK_GMOCK_GENERATED_MATCHERS_H_

File diff suppressed because it is too large Load Diff

@ -0,0 +1,162 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements some actions that depend on gmock-generated-actions.h.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_MORE_ACTIONS_H_
#define GMOCK_INCLUDE_GMOCK_GMOCK_MORE_ACTIONS_H_
#include <algorithm>
#include <type_traits>
#include "gmock/gmock-generated-actions.h"
namespace testing {
namespace internal {
// An internal replacement for std::copy which mimics its behavior. This is
// necessary because Visual Studio deprecates ::std::copy, issuing warning 4996.
// However Visual Studio 2010 and later do not honor #pragmas which disable that
// warning.
template<typename InputIterator, typename OutputIterator>
inline OutputIterator CopyElements(InputIterator first,
InputIterator last,
OutputIterator output) {
for (; first != last; ++first, ++output) {
*output = *first;
}
return output;
}
} // namespace internal
// Various overloads for Invoke().
// The ACTION*() macros trigger warning C4100 (unreferenced formal
// parameter) in MSVC with -W4. Unfortunately they cannot be fixed in
// the macro definition, as the warnings are generated when the macro
// is expanded and macro expansion cannot contain #pragma. Therefore
// we suppress them here.
#ifdef _MSC_VER
# pragma warning(push)
# pragma warning(disable:4100)
#endif
// Action ReturnArg<k>() returns the k-th argument of the mock function.
ACTION_TEMPLATE(ReturnArg,
HAS_1_TEMPLATE_PARAMS(int, k),
AND_0_VALUE_PARAMS()) {
return ::std::get<k>(args);
}
// Action SaveArg<k>(pointer) saves the k-th (0-based) argument of the
// mock function to *pointer.
ACTION_TEMPLATE(SaveArg,
HAS_1_TEMPLATE_PARAMS(int, k),
AND_1_VALUE_PARAMS(pointer)) {
*pointer = ::std::get<k>(args);
}
// Action SaveArgPointee<k>(pointer) saves the value pointed to
// by the k-th (0-based) argument of the mock function to *pointer.
ACTION_TEMPLATE(SaveArgPointee,
HAS_1_TEMPLATE_PARAMS(int, k),
AND_1_VALUE_PARAMS(pointer)) {
*pointer = *::std::get<k>(args);
}
// Action SetArgReferee<k>(value) assigns 'value' to the variable
// referenced by the k-th (0-based) argument of the mock function.
ACTION_TEMPLATE(SetArgReferee,
HAS_1_TEMPLATE_PARAMS(int, k),
AND_1_VALUE_PARAMS(value)) {
typedef typename ::std::tuple_element<k, args_type>::type argk_type;
// Ensures that argument #k is a reference. If you get a compiler
// error on the next line, you are using SetArgReferee<k>(value) in
// a mock function whose k-th (0-based) argument is not a reference.
GTEST_COMPILE_ASSERT_(std::is_reference<argk_type>::value,
SetArgReferee_must_be_used_with_a_reference_argument);
::std::get<k>(args) = value;
}
// Action SetArrayArgument<k>(first, last) copies the elements in
// source range [first, last) to the array pointed to by the k-th
// (0-based) argument, which can be either a pointer or an
// iterator. The action does not take ownership of the elements in the
// source range.
ACTION_TEMPLATE(SetArrayArgument,
HAS_1_TEMPLATE_PARAMS(int, k),
AND_2_VALUE_PARAMS(first, last)) {
// Visual Studio deprecates ::std::copy, so we use our own copy in that case.
#ifdef _MSC_VER
internal::CopyElements(first, last, ::std::get<k>(args));
#else
::std::copy(first, last, ::std::get<k>(args));
#endif
}
// Action DeleteArg<k>() deletes the k-th (0-based) argument of the mock
// function.
ACTION_TEMPLATE(DeleteArg,
HAS_1_TEMPLATE_PARAMS(int, k),
AND_0_VALUE_PARAMS()) {
delete ::std::get<k>(args);
}
// This action returns the value pointed to by 'pointer'.
ACTION_P(ReturnPointee, pointer) { return *pointer; }
// Action Throw(exception) can be used in a mock function of any type
// to throw the given exception. Any copyable value can be thrown.
#if GTEST_HAS_EXCEPTIONS
// Suppresses the 'unreachable code' warning that VC generates in opt modes.
# ifdef _MSC_VER
# pragma warning(push) // Saves the current warning state.
# pragma warning(disable:4702) // Temporarily disables warning 4702.
# endif
ACTION_P(Throw, exception) { throw exception; }
# ifdef _MSC_VER
# pragma warning(pop) // Restores the warning state.
# endif
#endif // GTEST_HAS_EXCEPTIONS
#ifdef _MSC_VER
# pragma warning(pop)
#endif
} // namespace testing
#endif // GMOCK_INCLUDE_GMOCK_GMOCK_MORE_ACTIONS_H_

@ -0,0 +1,92 @@
// Copyright 2013, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements some matchers that depend on gmock-generated-matchers.h.
//
// Note that tests are implemented in gmock-matchers_test.cc rather than
// gmock-more-matchers-test.cc.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_MORE_MATCHERS_H_
#define GMOCK_INCLUDE_GMOCK_MORE_MATCHERS_H_
#include "gmock/gmock-generated-matchers.h"
namespace testing {
// Silence C4100 (unreferenced formal
// parameter) for MSVC
#ifdef _MSC_VER
# pragma warning(push)
# pragma warning(disable:4100)
#if (_MSC_VER == 1900)
// and silence C4800 (C4800: 'int *const ': forcing value
// to bool 'true' or 'false') for MSVC 14
# pragma warning(disable:4800)
#endif
#endif
// Defines a matcher that matches an empty container. The container must
// support both size() and empty(), which all STL-like containers provide.
MATCHER(IsEmpty, negation ? "isn't empty" : "is empty") {
if (arg.empty()) {
return true;
}
*result_listener << "whose size is " << arg.size();
return false;
}
// Define a matcher that matches a value that evaluates in boolean
// context to true. Useful for types that define "explicit operator
// bool" operators and so can't be compared for equality with true
// and false.
MATCHER(IsTrue, negation ? "is false" : "is true") {
return static_cast<bool>(arg);
}
// Define a matcher that matches a value that evaluates in boolean
// context to false. Useful for types that define "explicit operator
// bool" operators and so can't be compared for equality with true
// and false.
MATCHER(IsFalse, negation ? "is true" : "is false") {
return !static_cast<bool>(arg);
}
#ifdef _MSC_VER
# pragma warning(pop)
#endif
} // namespace testing
#endif // GMOCK_INCLUDE_GMOCK_MORE_MATCHERS_H_

@ -0,0 +1,215 @@
// Copyright 2008, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Implements class templates NiceMock, NaggyMock, and StrictMock.
//
// Given a mock class MockFoo that is created using Google Mock,
// NiceMock<MockFoo> is a subclass of MockFoo that allows
// uninteresting calls (i.e. calls to mock methods that have no
// EXPECT_CALL specs), NaggyMock<MockFoo> is a subclass of MockFoo
// that prints a warning when an uninteresting call occurs, and
// StrictMock<MockFoo> is a subclass of MockFoo that treats all
// uninteresting calls as errors.
//
// Currently a mock is naggy by default, so MockFoo and
// NaggyMock<MockFoo> behave like the same. However, we will soon
// switch the default behavior of mocks to be nice, as that in general
// leads to more maintainable tests. When that happens, MockFoo will
// stop behaving like NaggyMock<MockFoo> and start behaving like
// NiceMock<MockFoo>.
//
// NiceMock, NaggyMock, and StrictMock "inherit" the constructors of
// their respective base class. Therefore you can write
// NiceMock<MockFoo>(5, "a") to construct a nice mock where MockFoo
// has a constructor that accepts (int, const char*), for example.
//
// A known limitation is that NiceMock<MockFoo>, NaggyMock<MockFoo>,
// and StrictMock<MockFoo> only works for mock methods defined using
// the MOCK_METHOD* family of macros DIRECTLY in the MockFoo class.
// If a mock method is defined in a base class of MockFoo, the "nice"
// or "strict" modifier may not affect it, depending on the compiler.
// In particular, nesting NiceMock, NaggyMock, and StrictMock is NOT
// supported.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_NICE_STRICT_H_
#define GMOCK_INCLUDE_GMOCK_GMOCK_NICE_STRICT_H_
#include "gmock/gmock-spec-builders.h"
#include "gmock/internal/gmock-port.h"
namespace testing {
template <class MockClass>
class NiceMock : public MockClass {
public:
NiceMock() : MockClass() {
::testing::Mock::AllowUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
// Ideally, we would inherit base class's constructors through a using
// declaration, which would preserve their visibility. However, many existing
// tests rely on the fact that current implementation reexports protected
// constructors as public. These tests would need to be cleaned up first.
// Single argument constructor is special-cased so that it can be
// made explicit.
template <typename A>
explicit NiceMock(A&& arg) : MockClass(std::forward<A>(arg)) {
::testing::Mock::AllowUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
template <typename A1, typename A2, typename... An>
NiceMock(A1&& arg1, A2&& arg2, An&&... args)
: MockClass(std::forward<A1>(arg1), std::forward<A2>(arg2),
std::forward<An>(args)...) {
::testing::Mock::AllowUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
~NiceMock() { // NOLINT
::testing::Mock::UnregisterCallReaction(
internal::ImplicitCast_<MockClass*>(this));
}
private:
GTEST_DISALLOW_COPY_AND_ASSIGN_(NiceMock);
};
template <class MockClass>
class NaggyMock : public MockClass {
public:
NaggyMock() : MockClass() {
::testing::Mock::WarnUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
// Ideally, we would inherit base class's constructors through a using
// declaration, which would preserve their visibility. However, many existing
// tests rely on the fact that current implementation reexports protected
// constructors as public. These tests would need to be cleaned up first.
// Single argument constructor is special-cased so that it can be
// made explicit.
template <typename A>
explicit NaggyMock(A&& arg) : MockClass(std::forward<A>(arg)) {
::testing::Mock::WarnUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
template <typename A1, typename A2, typename... An>
NaggyMock(A1&& arg1, A2&& arg2, An&&... args)
: MockClass(std::forward<A1>(arg1), std::forward<A2>(arg2),
std::forward<An>(args)...) {
::testing::Mock::WarnUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
~NaggyMock() { // NOLINT
::testing::Mock::UnregisterCallReaction(
internal::ImplicitCast_<MockClass*>(this));
}
private:
GTEST_DISALLOW_COPY_AND_ASSIGN_(NaggyMock);
};
template <class MockClass>
class StrictMock : public MockClass {
public:
StrictMock() : MockClass() {
::testing::Mock::FailUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
// Ideally, we would inherit base class's constructors through a using
// declaration, which would preserve their visibility. However, many existing
// tests rely on the fact that current implementation reexports protected
// constructors as public. These tests would need to be cleaned up first.
// Single argument constructor is special-cased so that it can be
// made explicit.
template <typename A>
explicit StrictMock(A&& arg) : MockClass(std::forward<A>(arg)) {
::testing::Mock::FailUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
template <typename A1, typename A2, typename... An>
StrictMock(A1&& arg1, A2&& arg2, An&&... args)
: MockClass(std::forward<A1>(arg1), std::forward<A2>(arg2),
std::forward<An>(args)...) {
::testing::Mock::FailUninterestingCalls(
internal::ImplicitCast_<MockClass*>(this));
}
~StrictMock() { // NOLINT
::testing::Mock::UnregisterCallReaction(
internal::ImplicitCast_<MockClass*>(this));
}
private:
GTEST_DISALLOW_COPY_AND_ASSIGN_(StrictMock);
};
// The following specializations catch some (relatively more common)
// user errors of nesting nice and strict mocks. They do NOT catch
// all possible errors.
// These specializations are declared but not defined, as NiceMock,
// NaggyMock, and StrictMock cannot be nested.
template <typename MockClass>
class NiceMock<NiceMock<MockClass> >;
template <typename MockClass>
class NiceMock<NaggyMock<MockClass> >;
template <typename MockClass>
class NiceMock<StrictMock<MockClass> >;
template <typename MockClass>
class NaggyMock<NiceMock<MockClass> >;
template <typename MockClass>
class NaggyMock<NaggyMock<MockClass> >;
template <typename MockClass>
class NaggyMock<StrictMock<MockClass> >;
template <typename MockClass>
class StrictMock<NiceMock<MockClass> >;
template <typename MockClass>
class StrictMock<NaggyMock<MockClass> >;
template <typename MockClass>
class StrictMock<StrictMock<MockClass> >;
} // namespace testing
#endif // GMOCK_INCLUDE_GMOCK_GMOCK_NICE_STRICT_H_

@ -0,0 +1,101 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This is the main header file a user should include.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_GMOCK_H_
#define GMOCK_INCLUDE_GMOCK_GMOCK_H_
// This file implements the following syntax:
//
// ON_CALL(mock_object, Method(...))
// .With(...) ?
// .WillByDefault(...);
//
// where With() is optional and WillByDefault() must appear exactly
// once.
//
// EXPECT_CALL(mock_object, Method(...))
// .With(...) ?
// .Times(...) ?
// .InSequence(...) *
// .WillOnce(...) *
// .WillRepeatedly(...) ?
// .RetiresOnSaturation() ? ;
//
// where all clauses are optional and WillOnce() can be repeated.
#include "gmock/gmock-actions.h"
#include "gmock/gmock-cardinalities.h"
#include "gmock/gmock-function-mocker.h"
#include "gmock/gmock-generated-actions.h"
#include "gmock/gmock-generated-function-mockers.h"
#include "gmock/gmock-generated-matchers.h"
#include "gmock/gmock-matchers.h"
#include "gmock/gmock-more-actions.h"
#include "gmock/gmock-more-matchers.h"
#include "gmock/gmock-nice-strict.h"
#include "gmock/internal/gmock-internal-utils.h"
namespace testing {
// Declares Google Mock flags that we want a user to use programmatically.
GMOCK_DECLARE_bool_(catch_leaked_mocks);
GMOCK_DECLARE_string_(verbose);
GMOCK_DECLARE_int32_(default_mock_behavior);
// Initializes Google Mock. This must be called before running the
// tests. In particular, it parses the command line for the flags
// that Google Mock recognizes. Whenever a Google Mock flag is seen,
// it is removed from argv, and *argc is decremented.
//
// No value is returned. Instead, the Google Mock flag variables are
// updated.
//
// Since Google Test is needed for Google Mock to work, this function
// also initializes Google Test and parses its flags, if that hasn't
// been done.
GTEST_API_ void InitGoogleMock(int* argc, char** argv);
// This overloaded version can be used in Windows programs compiled in
// UNICODE mode.
GTEST_API_ void InitGoogleMock(int* argc, wchar_t** argv);
// This overloaded version can be used on Arduino/embedded platforms where
// there is no argc/argv.
GTEST_API_ void InitGoogleMock();
} // namespace testing
#endif // GMOCK_INCLUDE_GMOCK_GMOCK_H_

@ -0,0 +1,16 @@
# Customization Points
The custom directory is an injection point for custom user configurations.
## Header `gmock-port.h`
The following macros can be defined:
### Flag related macros:
* `GMOCK_DECLARE_bool_(name)`
* `GMOCK_DECLARE_int32_(name)`
* `GMOCK_DECLARE_string_(name)`
* `GMOCK_DEFINE_bool_(name, default_val, doc)`
* `GMOCK_DEFINE_int32_(name, default_val, doc)`
* `GMOCK_DEFINE_string_(name, default_val, doc)`

@ -0,0 +1,10 @@
// This file was GENERATED by command:
// pump.py gmock-generated-actions.h.pump
// DO NOT EDIT BY HAND!!!
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_GENERATED_ACTIONS_H_
#define GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_GENERATED_ACTIONS_H_
#endif // GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_GENERATED_ACTIONS_H_

@ -0,0 +1,12 @@
$$ -*- mode: c++; -*-
$$ This is a Pump source file. Please use Pump to convert
$$ it to callback-actions.h.
$$
$var max_callback_arity = 5
$$}} This meta comment fixes auto-indentation in editors.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_GENERATED_ACTIONS_H_
#define GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_GENERATED_ACTIONS_H_
#endif // GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_GENERATED_ACTIONS_H_

@ -0,0 +1,36 @@
// Copyright 2015, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Injection point for custom user configurations. See README for details
//
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_MATCHERS_H_
#define GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_MATCHERS_H_
#endif // GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_MATCHERS_H_

@ -0,0 +1,39 @@
// Copyright 2015, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Injection point for custom user configurations. See README for details
//
// ** Custom implementation starts here **
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_PORT_H_
#define GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_PORT_H_
#endif // GMOCK_INCLUDE_GMOCK_INTERNAL_CUSTOM_GMOCK_PORT_H_

@ -0,0 +1,513 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file defines some utilities useful for implementing Google
// Mock. They are subject to change without notice, so please DO NOT
// USE THEM IN USER CODE.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_INTERNAL_UTILS_H_
#define GMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_INTERNAL_UTILS_H_
#include <stdio.h>
#include <ostream> // NOLINT
#include <string>
#include <type_traits>
#include "gmock/internal/gmock-port.h"
#include "gtest/gtest.h"
namespace testing {
template <typename>
class Matcher;
namespace internal {
// Silence MSVC C4100 (unreferenced formal parameter) and
// C4805('==': unsafe mix of type 'const int' and type 'const bool')
#ifdef _MSC_VER
# pragma warning(push)
# pragma warning(disable:4100)
# pragma warning(disable:4805)
#endif
// Joins a vector of strings as if they are fields of a tuple; returns
// the joined string.
GTEST_API_ std::string JoinAsTuple(const Strings& fields);
// Converts an identifier name to a space-separated list of lower-case
// words. Each maximum substring of the form [A-Za-z][a-z]*|\d+ is
// treated as one word. For example, both "FooBar123" and
// "foo_bar_123" are converted to "foo bar 123".
GTEST_API_ std::string ConvertIdentifierNameToWords(const char* id_name);
// PointeeOf<Pointer>::type is the type of a value pointed to by a
// Pointer, which can be either a smart pointer or a raw pointer. The
// following default implementation is for the case where Pointer is a
// smart pointer.
template <typename Pointer>
struct PointeeOf {
// Smart pointer classes define type element_type as the type of
// their pointees.
typedef typename Pointer::element_type type;
};
// This specialization is for the raw pointer case.
template <typename T>
struct PointeeOf<T*> { typedef T type; }; // NOLINT
// GetRawPointer(p) returns the raw pointer underlying p when p is a
// smart pointer, or returns p itself when p is already a raw pointer.
// The following default implementation is for the smart pointer case.
template <typename Pointer>
inline const typename Pointer::element_type* GetRawPointer(const Pointer& p) {
return p.get();
}
// This overloaded version is for the raw pointer case.
template <typename Element>
inline Element* GetRawPointer(Element* p) { return p; }
// MSVC treats wchar_t as a native type usually, but treats it as the
// same as unsigned short when the compiler option /Zc:wchar_t- is
// specified. It defines _NATIVE_WCHAR_T_DEFINED symbol when wchar_t
// is a native type.
#if defined(_MSC_VER) && !defined(_NATIVE_WCHAR_T_DEFINED)
// wchar_t is a typedef.
#else
# define GMOCK_WCHAR_T_IS_NATIVE_ 1
#endif
// In what follows, we use the term "kind" to indicate whether a type
// is bool, an integer type (excluding bool), a floating-point type,
// or none of them. This categorization is useful for determining
// when a matcher argument type can be safely converted to another
// type in the implementation of SafeMatcherCast.
enum TypeKind {
kBool, kInteger, kFloatingPoint, kOther
};
// KindOf<T>::value is the kind of type T.
template <typename T> struct KindOf {
enum { value = kOther }; // The default kind.
};
// This macro declares that the kind of 'type' is 'kind'.
#define GMOCK_DECLARE_KIND_(type, kind) \
template <> struct KindOf<type> { enum { value = kind }; }
GMOCK_DECLARE_KIND_(bool, kBool);
// All standard integer types.
GMOCK_DECLARE_KIND_(char, kInteger);
GMOCK_DECLARE_KIND_(signed char, kInteger);
GMOCK_DECLARE_KIND_(unsigned char, kInteger);
GMOCK_DECLARE_KIND_(short, kInteger); // NOLINT
GMOCK_DECLARE_KIND_(unsigned short, kInteger); // NOLINT
GMOCK_DECLARE_KIND_(int, kInteger);
GMOCK_DECLARE_KIND_(unsigned int, kInteger);
GMOCK_DECLARE_KIND_(long, kInteger); // NOLINT
GMOCK_DECLARE_KIND_(unsigned long, kInteger); // NOLINT
#if GMOCK_WCHAR_T_IS_NATIVE_
GMOCK_DECLARE_KIND_(wchar_t, kInteger);
#endif
// Non-standard integer types.
GMOCK_DECLARE_KIND_(Int64, kInteger);
GMOCK_DECLARE_KIND_(UInt64, kInteger);
// All standard floating-point types.
GMOCK_DECLARE_KIND_(float, kFloatingPoint);
GMOCK_DECLARE_KIND_(double, kFloatingPoint);
GMOCK_DECLARE_KIND_(long double, kFloatingPoint);
#undef GMOCK_DECLARE_KIND_
// Evaluates to the kind of 'type'.
#define GMOCK_KIND_OF_(type) \
static_cast< ::testing::internal::TypeKind>( \
::testing::internal::KindOf<type>::value)
// Evaluates to true if and only if integer type T is signed.
#define GMOCK_IS_SIGNED_(T) (static_cast<T>(-1) < 0)
// LosslessArithmeticConvertibleImpl<kFromKind, From, kToKind, To>::value
// is true if and only if arithmetic type From can be losslessly converted to
// arithmetic type To.
//
// It's the user's responsibility to ensure that both From and To are
// raw (i.e. has no CV modifier, is not a pointer, and is not a
// reference) built-in arithmetic types, kFromKind is the kind of
// From, and kToKind is the kind of To; the value is
// implementation-defined when the above pre-condition is violated.
template <TypeKind kFromKind, typename From, TypeKind kToKind, typename To>
struct LosslessArithmeticConvertibleImpl : public std::false_type {};
// Converting bool to bool is lossless.
template <>
struct LosslessArithmeticConvertibleImpl<kBool, bool, kBool, bool>
: public std::true_type {};
// Converting bool to any integer type is lossless.
template <typename To>
struct LosslessArithmeticConvertibleImpl<kBool, bool, kInteger, To>
: public std::true_type {};
// Converting bool to any floating-point type is lossless.
template <typename To>
struct LosslessArithmeticConvertibleImpl<kBool, bool, kFloatingPoint, To>
: public std::true_type {};
// Converting an integer to bool is lossy.
template <typename From>
struct LosslessArithmeticConvertibleImpl<kInteger, From, kBool, bool>
: public std::false_type {};
// Converting an integer to another non-bool integer is lossless
// if and only if the target type's range encloses the source type's range.
template <typename From, typename To>
struct LosslessArithmeticConvertibleImpl<kInteger, From, kInteger, To>
: public bool_constant<
// When converting from a smaller size to a larger size, we are
// fine as long as we are not converting from signed to unsigned.
((sizeof(From) < sizeof(To)) &&
(!GMOCK_IS_SIGNED_(From) || GMOCK_IS_SIGNED_(To))) ||
// When converting between the same size, the signedness must match.
((sizeof(From) == sizeof(To)) &&
(GMOCK_IS_SIGNED_(From) == GMOCK_IS_SIGNED_(To)))> {}; // NOLINT
#undef GMOCK_IS_SIGNED_
// Converting an integer to a floating-point type may be lossy, since
// the format of a floating-point number is implementation-defined.
template <typename From, typename To>
struct LosslessArithmeticConvertibleImpl<kInteger, From, kFloatingPoint, To>
: public std::false_type {};
// Converting a floating-point to bool is lossy.
template <typename From>
struct LosslessArithmeticConvertibleImpl<kFloatingPoint, From, kBool, bool>
: public std::false_type {};
// Converting a floating-point to an integer is lossy.
template <typename From, typename To>
struct LosslessArithmeticConvertibleImpl<kFloatingPoint, From, kInteger, To>
: public std::false_type {};
// Converting a floating-point to another floating-point is lossless
// if and only if the target type is at least as big as the source type.
template <typename From, typename To>
struct LosslessArithmeticConvertibleImpl<
kFloatingPoint, From, kFloatingPoint, To>
: public bool_constant<sizeof(From) <= sizeof(To)> {}; // NOLINT
// LosslessArithmeticConvertible<From, To>::value is true if and only if
// arithmetic type From can be losslessly converted to arithmetic type To.
//
// It's the user's responsibility to ensure that both From and To are
// raw (i.e. has no CV modifier, is not a pointer, and is not a
// reference) built-in arithmetic types; the value is
// implementation-defined when the above pre-condition is violated.
template <typename From, typename To>
struct LosslessArithmeticConvertible
: public LosslessArithmeticConvertibleImpl<
GMOCK_KIND_OF_(From), From, GMOCK_KIND_OF_(To), To> {}; // NOLINT
// This interface knows how to report a Google Mock failure (either
// non-fatal or fatal).
class FailureReporterInterface {
public:
// The type of a failure (either non-fatal or fatal).
enum FailureType {
kNonfatal, kFatal
};
virtual ~FailureReporterInterface() {}
// Reports a failure that occurred at the given source file location.
virtual void ReportFailure(FailureType type, const char* file, int line,
const std::string& message) = 0;
};
// Returns the failure reporter used by Google Mock.
GTEST_API_ FailureReporterInterface* GetFailureReporter();
// Asserts that condition is true; aborts the process with the given
// message if condition is false. We cannot use LOG(FATAL) or CHECK()
// as Google Mock might be used to mock the log sink itself. We
// inline this function to prevent it from showing up in the stack
// trace.
inline void Assert(bool condition, const char* file, int line,
const std::string& msg) {
if (!condition) {
GetFailureReporter()->ReportFailure(FailureReporterInterface::kFatal,
file, line, msg);
}
}
inline void Assert(bool condition, const char* file, int line) {
Assert(condition, file, line, "Assertion failed.");
}
// Verifies that condition is true; generates a non-fatal failure if
// condition is false.
inline void Expect(bool condition, const char* file, int line,
const std::string& msg) {
if (!condition) {
GetFailureReporter()->ReportFailure(FailureReporterInterface::kNonfatal,
file, line, msg);
}
}
inline void Expect(bool condition, const char* file, int line) {
Expect(condition, file, line, "Expectation failed.");
}
// Severity level of a log.
enum LogSeverity {
kInfo = 0,
kWarning = 1
};
// Valid values for the --gmock_verbose flag.
// All logs (informational and warnings) are printed.
const char kInfoVerbosity[] = "info";
// Only warnings are printed.
const char kWarningVerbosity[] = "warning";
// No logs are printed.
const char kErrorVerbosity[] = "error";
// Returns true if and only if a log with the given severity is visible
// according to the --gmock_verbose flag.
GTEST_API_ bool LogIsVisible(LogSeverity severity);
// Prints the given message to stdout if and only if 'severity' >= the level
// specified by the --gmock_verbose flag. If stack_frames_to_skip >=
// 0, also prints the stack trace excluding the top
// stack_frames_to_skip frames. In opt mode, any positive
// stack_frames_to_skip is treated as 0, since we don't know which
// function calls will be inlined by the compiler and need to be
// conservative.
GTEST_API_ void Log(LogSeverity severity, const std::string& message,
int stack_frames_to_skip);
// A marker class that is used to resolve parameterless expectations to the
// correct overload. This must not be instantiable, to prevent client code from
// accidentally resolving to the overload; for example:
//
// ON_CALL(mock, Method({}, nullptr))...
//
class WithoutMatchers {
private:
WithoutMatchers() {}
friend GTEST_API_ WithoutMatchers GetWithoutMatchers();
};
// Internal use only: access the singleton instance of WithoutMatchers.
GTEST_API_ WithoutMatchers GetWithoutMatchers();
// Type traits.
// Disable MSVC warnings for infinite recursion, since in this case the
// the recursion is unreachable.
#ifdef _MSC_VER
# pragma warning(push)
# pragma warning(disable:4717)
#endif
// Invalid<T>() is usable as an expression of type T, but will terminate
// the program with an assertion failure if actually run. This is useful
// when a value of type T is needed for compilation, but the statement
// will not really be executed (or we don't care if the statement
// crashes).
template <typename T>
inline T Invalid() {
Assert(false, "", -1, "Internal error: attempt to return invalid value");
// This statement is unreachable, and would never terminate even if it
// could be reached. It is provided only to placate compiler warnings
// about missing return statements.
return Invalid<T>();
}
#ifdef _MSC_VER
# pragma warning(pop)
#endif
// Given a raw type (i.e. having no top-level reference or const
// modifier) RawContainer that's either an STL-style container or a
// native array, class StlContainerView<RawContainer> has the
// following members:
//
// - type is a type that provides an STL-style container view to
// (i.e. implements the STL container concept for) RawContainer;
// - const_reference is a type that provides a reference to a const
// RawContainer;
// - ConstReference(raw_container) returns a const reference to an STL-style
// container view to raw_container, which is a RawContainer.
// - Copy(raw_container) returns an STL-style container view of a
// copy of raw_container, which is a RawContainer.
//
// This generic version is used when RawContainer itself is already an
// STL-style container.
template <class RawContainer>
class StlContainerView {
public:
typedef RawContainer type;
typedef const type& const_reference;
static const_reference ConstReference(const RawContainer& container) {
static_assert(!std::is_const<RawContainer>::value,
"RawContainer type must not be const");
return container;
}
static type Copy(const RawContainer& container) { return container; }
};
// This specialization is used when RawContainer is a native array type.
template <typename Element, size_t N>
class StlContainerView<Element[N]> {
public:
typedef typename std::remove_const<Element>::type RawElement;
typedef internal::NativeArray<RawElement> type;
// NativeArray<T> can represent a native array either by value or by
// reference (selected by a constructor argument), so 'const type'
// can be used to reference a const native array. We cannot
// 'typedef const type& const_reference' here, as that would mean
// ConstReference() has to return a reference to a local variable.
typedef const type const_reference;
static const_reference ConstReference(const Element (&array)[N]) {
static_assert(std::is_same<Element, RawElement>::value,
"Element type must not be const");
return type(array, N, RelationToSourceReference());
}
static type Copy(const Element (&array)[N]) {
return type(array, N, RelationToSourceCopy());
}
};
// This specialization is used when RawContainer is a native array
// represented as a (pointer, size) tuple.
template <typename ElementPointer, typename Size>
class StlContainerView< ::std::tuple<ElementPointer, Size> > {
public:
typedef typename std::remove_const<
typename internal::PointeeOf<ElementPointer>::type>::type RawElement;
typedef internal::NativeArray<RawElement> type;
typedef const type const_reference;
static const_reference ConstReference(
const ::std::tuple<ElementPointer, Size>& array) {
return type(std::get<0>(array), std::get<1>(array),
RelationToSourceReference());
}
static type Copy(const ::std::tuple<ElementPointer, Size>& array) {
return type(std::get<0>(array), std::get<1>(array), RelationToSourceCopy());
}
};
// The following specialization prevents the user from instantiating
// StlContainer with a reference type.
template <typename T> class StlContainerView<T&>;
// A type transform to remove constness from the first part of a pair.
// Pairs like that are used as the value_type of associative containers,
// and this transform produces a similar but assignable pair.
template <typename T>
struct RemoveConstFromKey {
typedef T type;
};
// Partially specialized to remove constness from std::pair<const K, V>.
template <typename K, typename V>
struct RemoveConstFromKey<std::pair<const K, V> > {
typedef std::pair<K, V> type;
};
// Emit an assertion failure due to incorrect DoDefault() usage. Out-of-lined to
// reduce code size.
GTEST_API_ void IllegalDoDefault(const char* file, int line);
template <typename F, typename Tuple, size_t... Idx>
auto ApplyImpl(F&& f, Tuple&& args, IndexSequence<Idx...>) -> decltype(
std::forward<F>(f)(std::get<Idx>(std::forward<Tuple>(args))...)) {
return std::forward<F>(f)(std::get<Idx>(std::forward<Tuple>(args))...);
}
// Apply the function to a tuple of arguments.
template <typename F, typename Tuple>
auto Apply(F&& f, Tuple&& args)
-> decltype(ApplyImpl(std::forward<F>(f), std::forward<Tuple>(args),
MakeIndexSequence<std::tuple_size<Tuple>::value>())) {
return ApplyImpl(std::forward<F>(f), std::forward<Tuple>(args),
MakeIndexSequence<std::tuple_size<Tuple>::value>());
}
// Template struct Function<F>, where F must be a function type, contains
// the following typedefs:
//
// Result: the function's return type.
// Arg<N>: the type of the N-th argument, where N starts with 0.
// ArgumentTuple: the tuple type consisting of all parameters of F.
// ArgumentMatcherTuple: the tuple type consisting of Matchers for all
// parameters of F.
// MakeResultVoid: the function type obtained by substituting void
// for the return type of F.
// MakeResultIgnoredValue:
// the function type obtained by substituting Something
// for the return type of F.
template <typename T>
struct Function;
template <typename R, typename... Args>
struct Function<R(Args...)> {
using Result = R;
static constexpr size_t ArgumentCount = sizeof...(Args);
template <size_t I>
using Arg = ElemFromList<I, typename MakeIndexSequence<sizeof...(Args)>::type,
Args...>;
using ArgumentTuple = std::tuple<Args...>;
using ArgumentMatcherTuple = std::tuple<Matcher<Args>...>;
using MakeResultVoid = void(Args...);
using MakeResultIgnoredValue = IgnoredValue(Args...);
};
template <typename R, typename... Args>
constexpr size_t Function<R(Args...)>::ArgumentCount;
#ifdef _MSC_VER
# pragma warning(pop)
#endif
} // namespace internal
} // namespace testing
#endif // GMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_INTERNAL_UTILS_H_

@ -0,0 +1,87 @@
// Copyright 2008, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Low-level types and utilities for porting Google Mock to various
// platforms. All macros ending with _ and symbols defined in an
// internal namespace are subject to change without notice. Code
// outside Google Mock MUST NOT USE THEM DIRECTLY. Macros that don't
// end with _ are part of Google Mock's public API and can be used by
// code outside Google Mock.
// GOOGLETEST_CM0002 DO NOT DELETE
#ifndef GMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_PORT_H_
#define GMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_PORT_H_
#include <assert.h>
#include <stdlib.h>
#include <iostream>
// Most of the utilities needed for porting Google Mock are also
// required for Google Test and are defined in gtest-port.h.
//
// Note to maintainers: to reduce code duplication, prefer adding
// portability utilities to Google Test's gtest-port.h instead of
// here, as Google Mock depends on Google Test. Only add a utility
// here if it's truly specific to Google Mock.
#include "gtest/internal/gtest-port.h"
#include "gmock/internal/custom/gmock-port.h"
// For MS Visual C++, check the compiler version. At least VS 2015 is
// required to compile Google Mock.
#if defined(_MSC_VER) && _MSC_VER < 1900
# error "At least Visual C++ 2015 (14.0) is required to compile Google Mock."
#endif
// Macro for referencing flags. This is public as we want the user to
// use this syntax to reference Google Mock flags.
#define GMOCK_FLAG(name) FLAGS_gmock_##name
#if !defined(GMOCK_DECLARE_bool_)
// Macros for declaring flags.
# define GMOCK_DECLARE_bool_(name) extern GTEST_API_ bool GMOCK_FLAG(name)
# define GMOCK_DECLARE_int32_(name) \
extern GTEST_API_ ::testing::internal::Int32 GMOCK_FLAG(name)
# define GMOCK_DECLARE_string_(name) \
extern GTEST_API_ ::std::string GMOCK_FLAG(name)
// Macros for defining flags.
# define GMOCK_DEFINE_bool_(name, default_val, doc) \
GTEST_API_ bool GMOCK_FLAG(name) = (default_val)
# define GMOCK_DEFINE_int32_(name, default_val, doc) \
GTEST_API_ ::testing::internal::Int32 GMOCK_FLAG(name) = (default_val)
# define GMOCK_DEFINE_string_(name, default_val, doc) \
GTEST_API_ ::std::string GMOCK_FLAG(name) = (default_val)
#endif // !defined(GMOCK_DECLARE_bool_)
#endif // GMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_PORT_H_

@ -0,0 +1,317 @@
#ifndef THIRD_PARTY_GOOGLETEST_GOOGLEMOCK_INCLUDE_GMOCK_PP_H_
#define THIRD_PARTY_GOOGLETEST_GOOGLEMOCK_INCLUDE_GMOCK_PP_H_
#undef GMOCK_PP_INTERNAL_USE_MSVC
#if defined(__clang__)
#define GMOCK_PP_INTERNAL_USE_MSVC 0
#elif defined(_MSC_VER)
// TODO(iserna): Also verify tradional versus comformant preprocessor.
static_assert(
_MSC_VER >= 1900,
"MSVC version not supported. There is support for MSVC 14.0 and above.");
#define GMOCK_PP_INTERNAL_USE_MSVC 1
#else
#define GMOCK_PP_INTERNAL_USE_MSVC 0
#endif
// Expands and concatenates the arguments. Constructed macros reevaluate.
#define GMOCK_PP_CAT(_1, _2) GMOCK_PP_INTERNAL_CAT(_1, _2)
// Expands and stringifies the only argument.
#define GMOCK_PP_STRINGIZE(...) GMOCK_PP_INTERNAL_STRINGIZE(__VA_ARGS__)
// Returns empty. Given a variadic number of arguments.
#define GMOCK_PP_EMPTY(...)
// Returns a comma. Given a variadic number of arguments.
#define GMOCK_PP_COMMA(...) ,
// Returns the only argument.
#define GMOCK_PP_IDENTITY(_1) _1
// MSVC preprocessor collapses __VA_ARGS__ in a single argument, we use a
// CAT-like directive to force correct evaluation. Each macro has its own.
#if GMOCK_PP_INTERNAL_USE_MSVC
// Evaluates to the number of arguments after expansion.
//
// #define PAIR x, y
//
// GMOCK_PP_NARG() => 1
// GMOCK_PP_NARG(x) => 1
// GMOCK_PP_NARG(x, y) => 2
// GMOCK_PP_NARG(PAIR) => 2
//
// Requires: the number of arguments after expansion is at most 15.
#define GMOCK_PP_NARG(...) \
GMOCK_PP_INTERNAL_NARG_CAT( \
GMOCK_PP_INTERNAL_INTERNAL_16TH(__VA_ARGS__, 15, 14, 13, 12, 11, 10, 9, \
8, 7, 6, 5, 4, 3, 2, 1), )
// Returns 1 if the expansion of arguments has an unprotected comma. Otherwise
// returns 0. Requires no more than 15 unprotected commas.
#define GMOCK_PP_HAS_COMMA(...) \
GMOCK_PP_INTERNAL_HAS_COMMA_CAT( \
GMOCK_PP_INTERNAL_INTERNAL_16TH(__VA_ARGS__, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1, 1, 1, 1, 1, 0), )
// Returns the first argument.
#define GMOCK_PP_HEAD(...) \
GMOCK_PP_INTERNAL_HEAD_CAT(GMOCK_PP_INTERNAL_HEAD(__VA_ARGS__), )
// Returns the tail. A variadic list of all arguments minus the first. Requires
// at least one argument.
#define GMOCK_PP_TAIL(...) \
GMOCK_PP_INTERNAL_TAIL_CAT(GMOCK_PP_INTERNAL_TAIL(__VA_ARGS__), )
// Calls CAT(_Macro, NARG(__VA_ARGS__))(__VA_ARGS__)
#define GMOCK_PP_VARIADIC_CALL(_Macro, ...) \
GMOCK_PP_INTERNAL_VARIADIC_CALL_CAT( \
GMOCK_PP_CAT(_Macro, GMOCK_PP_NARG(__VA_ARGS__))(__VA_ARGS__), )
#else // GMOCK_PP_INTERNAL_USE_MSVC
#define GMOCK_PP_NARG(...) \
GMOCK_PP_INTERNAL_INTERNAL_16TH(__VA_ARGS__, 15, 14, 13, 12, 11, 10, 9, 8, \
7, 6, 5, 4, 3, 2, 1)
#define GMOCK_PP_HAS_COMMA(...) \
GMOCK_PP_INTERNAL_INTERNAL_16TH(__VA_ARGS__, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
1, 1, 1, 1, 0)
#define GMOCK_PP_HEAD(...) GMOCK_PP_INTERNAL_HEAD(__VA_ARGS__)
#define GMOCK_PP_TAIL(...) GMOCK_PP_INTERNAL_TAIL(__VA_ARGS__)
#define GMOCK_PP_VARIADIC_CALL(_Macro, ...) \
GMOCK_PP_CAT(_Macro, GMOCK_PP_NARG(__VA_ARGS__))(__VA_ARGS__)
#endif // GMOCK_PP_INTERNAL_USE_MSVC
// If the arguments after expansion have no tokens, evaluates to `1`. Otherwise
// evaluates to `0`.
//
// Requires: * the number of arguments after expansion is at most 15.
// * If the argument is a macro, it must be able to be called with one
// argument.
//
// Implementation details:
//
// There is one case when it generates a compile error: if the argument is macro
// that cannot be called with one argument.
//
// #define M(a, b) // it doesn't matter what it expands to
//
// // Expected: expands to `0`.
// // Actual: compile error.
// GMOCK_PP_IS_EMPTY(M)
//
// There are 4 cases tested:
//
// * __VA_ARGS__ possible expansion has no unparen'd commas. Expected 0.
// * __VA_ARGS__ possible expansion is not enclosed in parenthesis. Expected 0.
// * __VA_ARGS__ possible expansion is not a macro that ()-evaluates to a comma.
// Expected 0
// * __VA_ARGS__ is empty, or has unparen'd commas, or is enclosed in
// parenthesis, or is a macro that ()-evaluates to comma. Expected 1.
//
// We trigger detection on '0001', i.e. on empty.
#define GMOCK_PP_IS_EMPTY(...) \
GMOCK_PP_INTERNAL_IS_EMPTY(GMOCK_PP_HAS_COMMA(__VA_ARGS__), \
GMOCK_PP_HAS_COMMA(GMOCK_PP_COMMA __VA_ARGS__), \
GMOCK_PP_HAS_COMMA(__VA_ARGS__()), \
GMOCK_PP_HAS_COMMA(GMOCK_PP_COMMA __VA_ARGS__()))
// Evaluates to _Then if _Cond is 1 and _Else if _Cond is 0.
#define GMOCK_PP_IF(_Cond, _Then, _Else) \
GMOCK_PP_CAT(GMOCK_PP_INTERNAL_IF_, _Cond)(_Then, _Else)
// Evaluates to the number of arguments after expansion. Identifies 'empty' as
// 0.
//
// #define PAIR x, y
//
// GMOCK_PP_NARG0() => 0
// GMOCK_PP_NARG0(x) => 1
// GMOCK_PP_NARG0(x, y) => 2
// GMOCK_PP_NARG0(PAIR) => 2
//
// Requires: * the number of arguments after expansion is at most 15.
// * If the argument is a macro, it must be able to be called with one
// argument.
#define GMOCK_PP_NARG0(...) \
GMOCK_PP_IF(GMOCK_PP_IS_EMPTY(__VA_ARGS__), 0, GMOCK_PP_NARG(__VA_ARGS__))
// Expands to 1 if the first argument starts with something in parentheses,
// otherwise to 0.
#define GMOCK_PP_IS_BEGIN_PARENS(...) \
GMOCK_PP_INTERNAL_ALTERNATE_HEAD( \
GMOCK_PP_CAT(GMOCK_PP_INTERNAL_IBP_IS_VARIADIC_R_, \
GMOCK_PP_INTERNAL_IBP_IS_VARIADIC_C __VA_ARGS__))
// Expands to 1 is there is only one argument and it is enclosed in parentheses.
#define GMOCK_PP_IS_ENCLOSED_PARENS(...) \
GMOCK_PP_IF(GMOCK_PP_IS_BEGIN_PARENS(__VA_ARGS__), \
GMOCK_PP_IS_EMPTY(GMOCK_PP_EMPTY __VA_ARGS__), 0)
// Remove the parens, requires GMOCK_PP_IS_ENCLOSED_PARENS(args) => 1.
#define GMOCK_PP_REMOVE_PARENS(...) GMOCK_PP_INTERNAL_REMOVE_PARENS __VA_ARGS__
// Expands to _Macro(0, _Data, e1) _Macro(1, _Data, e2) ... _Macro(K -1, _Data,
// eK) as many of GMOCK_INTERNAL_NARG0 _Tuple.
// Requires: * |_Macro| can be called with 3 arguments.
// * |_Tuple| expansion has no more than 15 elements.
#define GMOCK_PP_FOR_EACH(_Macro, _Data, _Tuple) \
GMOCK_PP_CAT(GMOCK_PP_INTERNAL_FOR_EACH_IMPL_, GMOCK_PP_NARG0 _Tuple) \
(0, _Macro, _Data, _Tuple)
// Expands to _Macro(0, _Data, ) _Macro(1, _Data, ) ... _Macro(K - 1, _Data, )
// Empty if _K = 0.
// Requires: * |_Macro| can be called with 3 arguments.
// * |_K| literal between 0 and 15
#define GMOCK_PP_REPEAT(_Macro, _Data, _N) \
GMOCK_PP_CAT(GMOCK_PP_INTERNAL_FOR_EACH_IMPL_, _N) \
(0, _Macro, _Data, GMOCK_PP_INTENRAL_EMPTY_TUPLE)
// Increments the argument, requires the argument to be between 0 and 15.
#define GMOCK_PP_INC(_i) GMOCK_PP_CAT(GMOCK_PP_INTERNAL_INC_, _i)
// Returns comma if _i != 0. Requires _i to be between 0 and 15.
#define GMOCK_PP_COMMA_IF(_i) GMOCK_PP_CAT(GMOCK_PP_INTERNAL_COMMA_IF_, _i)
// Internal details follow. Do not use any of these symbols outside of this
// file or we will break your code.
#define GMOCK_PP_INTENRAL_EMPTY_TUPLE (, , , , , , , , , , , , , , , )
#define GMOCK_PP_INTERNAL_CAT(_1, _2) _1##_2
#define GMOCK_PP_INTERNAL_STRINGIZE(...) #__VA_ARGS__
#define GMOCK_PP_INTERNAL_INTERNAL_16TH(_1, _2, _3, _4, _5, _6, _7, _8, _9, \
_10, _11, _12, _13, _14, _15, _16, \
...) \
_16
#define GMOCK_PP_INTERNAL_CAT_5(_1, _2, _3, _4, _5) _1##_2##_3##_4##_5
#define GMOCK_PP_INTERNAL_IS_EMPTY(_1, _2, _3, _4) \
GMOCK_PP_HAS_COMMA(GMOCK_PP_INTERNAL_CAT_5(GMOCK_PP_INTERNAL_IS_EMPTY_CASE_, \
_1, _2, _3, _4))
#define GMOCK_PP_INTERNAL_IS_EMPTY_CASE_0001 ,
#define GMOCK_PP_INTERNAL_IF_1(_Then, _Else) _Then
#define GMOCK_PP_INTERNAL_IF_0(_Then, _Else) _Else
#define GMOCK_PP_INTERNAL_HEAD(_1, ...) _1
#define GMOCK_PP_INTERNAL_TAIL(_1, ...) __VA_ARGS__
#if GMOCK_PP_INTERNAL_USE_MSVC
#define GMOCK_PP_INTERNAL_NARG_CAT(_1, _2) GMOCK_PP_INTERNAL_NARG_CAT_I(_1, _2)
#define GMOCK_PP_INTERNAL_HEAD_CAT(_1, _2) GMOCK_PP_INTERNAL_HEAD_CAT_I(_1, _2)
#define GMOCK_PP_INTERNAL_HAS_COMMA_CAT(_1, _2) \
GMOCK_PP_INTERNAL_HAS_COMMA_CAT_I(_1, _2)
#define GMOCK_PP_INTERNAL_TAIL_CAT(_1, _2) GMOCK_PP_INTERNAL_TAIL_CAT_I(_1, _2)
#define GMOCK_PP_INTERNAL_VARIADIC_CALL_CAT(_1, _2) \
GMOCK_PP_INTERNAL_VARIADIC_CALL_CAT_I(_1, _2)
#define GMOCK_PP_INTERNAL_NARG_CAT_I(_1, _2) _1##_2
#define GMOCK_PP_INTERNAL_HEAD_CAT_I(_1, _2) _1##_2
#define GMOCK_PP_INTERNAL_HAS_COMMA_CAT_I(_1, _2) _1##_2
#define GMOCK_PP_INTERNAL_TAIL_CAT_I(_1, _2) _1##_2
#define GMOCK_PP_INTERNAL_VARIADIC_CALL_CAT_I(_1, _2) _1##_2
#define GMOCK_PP_INTERNAL_ALTERNATE_HEAD(...) \
GMOCK_PP_INTERNAL_ALTERNATE_HEAD_CAT(GMOCK_PP_HEAD(__VA_ARGS__), )
#define GMOCK_PP_INTERNAL_ALTERNATE_HEAD_CAT(_1, _2) \
GMOCK_PP_INTERNAL_ALTERNATE_HEAD_CAT_I(_1, _2)
#define GMOCK_PP_INTERNAL_ALTERNATE_HEAD_CAT_I(_1, _2) _1##_2
#else // GMOCK_PP_INTERNAL_USE_MSVC
#define GMOCK_PP_INTERNAL_ALTERNATE_HEAD(...) GMOCK_PP_HEAD(__VA_ARGS__)
#endif // GMOCK_PP_INTERNAL_USE_MSVC
#define GMOCK_PP_INTERNAL_IBP_IS_VARIADIC_C(...) 1 _
#define GMOCK_PP_INTERNAL_IBP_IS_VARIADIC_R_1 1,
#define GMOCK_PP_INTERNAL_IBP_IS_VARIADIC_R_GMOCK_PP_INTERNAL_IBP_IS_VARIADIC_C \
0,
#define GMOCK_PP_INTERNAL_REMOVE_PARENS(...) __VA_ARGS__
#define GMOCK_PP_INTERNAL_INC_0 1
#define GMOCK_PP_INTERNAL_INC_1 2
#define GMOCK_PP_INTERNAL_INC_2 3
#define GMOCK_PP_INTERNAL_INC_3 4
#define GMOCK_PP_INTERNAL_INC_4 5
#define GMOCK_PP_INTERNAL_INC_5 6
#define GMOCK_PP_INTERNAL_INC_6 7
#define GMOCK_PP_INTERNAL_INC_7 8
#define GMOCK_PP_INTERNAL_INC_8 9
#define GMOCK_PP_INTERNAL_INC_9 10
#define GMOCK_PP_INTERNAL_INC_10 11
#define GMOCK_PP_INTERNAL_INC_11 12
#define GMOCK_PP_INTERNAL_INC_12 13
#define GMOCK_PP_INTERNAL_INC_13 14
#define GMOCK_PP_INTERNAL_INC_14 15
#define GMOCK_PP_INTERNAL_INC_15 16
#define GMOCK_PP_INTERNAL_COMMA_IF_0
#define GMOCK_PP_INTERNAL_COMMA_IF_1 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_2 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_3 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_4 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_5 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_6 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_7 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_8 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_9 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_10 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_11 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_12 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_13 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_14 ,
#define GMOCK_PP_INTERNAL_COMMA_IF_15 ,
#define GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, _element) \
_Macro(_i, _Data, _element)
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_0(_i, _Macro, _Data, _Tuple)
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_1(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple)
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_2(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_1(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_3(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_2(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_4(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_3(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_5(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_4(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_6(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_5(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_7(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_6(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_8(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_7(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_9(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_8(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_10(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_9(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_11(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_10(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_12(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_11(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_13(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_12(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_14(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_13(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#define GMOCK_PP_INTERNAL_FOR_EACH_IMPL_15(_i, _Macro, _Data, _Tuple) \
GMOCK_PP_INTERNAL_CALL_MACRO(_Macro, _i, _Data, GMOCK_PP_HEAD _Tuple) \
GMOCK_PP_INTERNAL_FOR_EACH_IMPL_14(GMOCK_PP_INC(_i), _Macro, _Data, \
(GMOCK_PP_TAIL _Tuple))
#endif // THIRD_PARTY_GOOGLETEST_GOOGLEMOCK_INCLUDE_GMOCK_INTERNAL_GMOCK_PP_H_

@ -0,0 +1,240 @@
#!/usr/bin/env python
#
# Copyright 2009, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
"""fuse_gmock_files.py v0.1.0
Fuses Google Mock and Google Test source code into two .h files and a .cc file.
SYNOPSIS
fuse_gmock_files.py [GMOCK_ROOT_DIR] OUTPUT_DIR
Scans GMOCK_ROOT_DIR for Google Mock and Google Test source
code, assuming Google Test is in the GMOCK_ROOT_DIR/../googletest
directory, and generates three files:
OUTPUT_DIR/gtest/gtest.h, OUTPUT_DIR/gmock/gmock.h, and
OUTPUT_DIR/gmock-gtest-all.cc. Then you can build your tests
by adding OUTPUT_DIR to the include search path and linking
with OUTPUT_DIR/gmock-gtest-all.cc. These three files contain
everything you need to use Google Mock. Hence you can
"install" Google Mock by copying them to wherever you want.
GMOCK_ROOT_DIR can be omitted and defaults to the parent
directory of the directory holding this script.
EXAMPLES
./fuse_gmock_files.py fused_gmock
./fuse_gmock_files.py path/to/unpacked/gmock fused_gmock
This tool is experimental. In particular, it assumes that there is no
conditional inclusion of Google Mock or Google Test headers. Please
report any problems to googlemock@googlegroups.com. You can read
https://github.com/google/googletest/blob/master/googlemock/docs/cook_book.md for more
information.
"""
__author__ = 'wan@google.com (Zhanyong Wan)'
import os
import re
import sets
import sys
# We assume that this file is in the scripts/ directory in the Google
# Mock root directory.
DEFAULT_GMOCK_ROOT_DIR = os.path.join(os.path.dirname(__file__), '..')
# We need to call into googletest/scripts/fuse_gtest_files.py.
sys.path.append(os.path.join(DEFAULT_GMOCK_ROOT_DIR, '../googletest/scripts'))
import fuse_gtest_files
gtest = fuse_gtest_files
# Regex for matching '#include "gmock/..."'.
INCLUDE_GMOCK_FILE_REGEX = re.compile(r'^\s*#\s*include\s*"(gmock/.+)"')
# Where to find the source seed files.
GMOCK_H_SEED = 'include/gmock/gmock.h'
GMOCK_ALL_CC_SEED = 'src/gmock-all.cc'
# Where to put the generated files.
GTEST_H_OUTPUT = 'gtest/gtest.h'
GMOCK_H_OUTPUT = 'gmock/gmock.h'
GMOCK_GTEST_ALL_CC_OUTPUT = 'gmock-gtest-all.cc'
def GetGTestRootDir(gmock_root):
"""Returns the root directory of Google Test."""
return os.path.join(gmock_root, '../googletest')
def ValidateGMockRootDir(gmock_root):
"""Makes sure gmock_root points to a valid gmock root directory.
The function aborts the program on failure.
"""
gtest.ValidateGTestRootDir(GetGTestRootDir(gmock_root))
gtest.VerifyFileExists(gmock_root, GMOCK_H_SEED)
gtest.VerifyFileExists(gmock_root, GMOCK_ALL_CC_SEED)
def ValidateOutputDir(output_dir):
"""Makes sure output_dir points to a valid output directory.
The function aborts the program on failure.
"""
gtest.VerifyOutputFile(output_dir, gtest.GTEST_H_OUTPUT)
gtest.VerifyOutputFile(output_dir, GMOCK_H_OUTPUT)
gtest.VerifyOutputFile(output_dir, GMOCK_GTEST_ALL_CC_OUTPUT)
def FuseGMockH(gmock_root, output_dir):
"""Scans folder gmock_root to generate gmock/gmock.h in output_dir."""
output_file = file(os.path.join(output_dir, GMOCK_H_OUTPUT), 'w')
processed_files = sets.Set() # Holds all gmock headers we've processed.
def ProcessFile(gmock_header_path):
"""Processes the given gmock header file."""
# We don't process the same header twice.
if gmock_header_path in processed_files:
return
processed_files.add(gmock_header_path)
# Reads each line in the given gmock header.
for line in file(os.path.join(gmock_root, gmock_header_path), 'r'):
m = INCLUDE_GMOCK_FILE_REGEX.match(line)
if m:
# It's '#include "gmock/..."' - let's process it recursively.
ProcessFile('include/' + m.group(1))
else:
m = gtest.INCLUDE_GTEST_FILE_REGEX.match(line)
if m:
# It's '#include "gtest/foo.h"'. We translate it to
# "gtest/gtest.h", regardless of what foo is, since all
# gtest headers are fused into gtest/gtest.h.
# There is no need to #include gtest.h twice.
if not gtest.GTEST_H_SEED in processed_files:
processed_files.add(gtest.GTEST_H_SEED)
output_file.write('#include "%s"\n' % (gtest.GTEST_H_OUTPUT,))
else:
# Otherwise we copy the line unchanged to the output file.
output_file.write(line)
ProcessFile(GMOCK_H_SEED)
output_file.close()
def FuseGMockAllCcToFile(gmock_root, output_file):
"""Scans folder gmock_root to fuse gmock-all.cc into output_file."""
processed_files = sets.Set()
def ProcessFile(gmock_source_file):
"""Processes the given gmock source file."""
# We don't process the same #included file twice.
if gmock_source_file in processed_files:
return
processed_files.add(gmock_source_file)
# Reads each line in the given gmock source file.
for line in file(os.path.join(gmock_root, gmock_source_file), 'r'):
m = INCLUDE_GMOCK_FILE_REGEX.match(line)
if m:
# It's '#include "gmock/foo.h"'. We treat it as '#include
# "gmock/gmock.h"', as all other gmock headers are being fused
# into gmock.h and cannot be #included directly.
# There is no need to #include "gmock/gmock.h" more than once.
if not GMOCK_H_SEED in processed_files:
processed_files.add(GMOCK_H_SEED)
output_file.write('#include "%s"\n' % (GMOCK_H_OUTPUT,))
else:
m = gtest.INCLUDE_GTEST_FILE_REGEX.match(line)
if m:
# It's '#include "gtest/..."'.
# There is no need to #include gtest.h as it has been
# #included by gtest-all.cc.
pass
else:
m = gtest.INCLUDE_SRC_FILE_REGEX.match(line)
if m:
# It's '#include "src/foo"' - let's process it recursively.
ProcessFile(m.group(1))
else:
# Otherwise we copy the line unchanged to the output file.
output_file.write(line)
ProcessFile(GMOCK_ALL_CC_SEED)
def FuseGMockGTestAllCc(gmock_root, output_dir):
"""Scans folder gmock_root to generate gmock-gtest-all.cc in output_dir."""
output_file = file(os.path.join(output_dir, GMOCK_GTEST_ALL_CC_OUTPUT), 'w')
# First, fuse gtest-all.cc into gmock-gtest-all.cc.
gtest.FuseGTestAllCcToFile(GetGTestRootDir(gmock_root), output_file)
# Next, append fused gmock-all.cc to gmock-gtest-all.cc.
FuseGMockAllCcToFile(gmock_root, output_file)
output_file.close()
def FuseGMock(gmock_root, output_dir):
"""Fuses gtest.h, gmock.h, and gmock-gtest-all.h."""
ValidateGMockRootDir(gmock_root)
ValidateOutputDir(output_dir)
gtest.FuseGTestH(GetGTestRootDir(gmock_root), output_dir)
FuseGMockH(gmock_root, output_dir)
FuseGMockGTestAllCc(gmock_root, output_dir)
def main():
argc = len(sys.argv)
if argc == 2:
# fuse_gmock_files.py OUTPUT_DIR
FuseGMock(DEFAULT_GMOCK_ROOT_DIR, sys.argv[1])
elif argc == 3:
# fuse_gmock_files.py GMOCK_ROOT_DIR OUTPUT_DIR
FuseGMock(sys.argv[1], sys.argv[2])
else:
print __doc__
sys.exit(1)
if __name__ == '__main__':
main()

@ -0,0 +1,203 @@
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by
the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all
other entities that control, are controlled by, or are under common
control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the
direction or management of such entity, whether by contract or
otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity
exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications,
including but not limited to software source code, documentation
source, and configuration files.
"Object" form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but
not limited to compiled object code, generated documentation,
and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the purposes
of this License, Derivative Works shall not include works that remain
separable from, or merely link (or bind by name) to the interfaces of,
the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including
the original version of the Work and any modifications or additions
to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner
or by an individual or Legal Entity authorized to submit on behalf of
the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control systems,
and issue tracking systems that are managed by, or on behalf of, the
Licensor for the purpose of discussing and improving the Work, but
excluding communication that is conspicuously marked or otherwise
designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of,
publicly display, publicly perform, sublicense, and distribute the
Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work,
where such license applies only to those patent claims licensable
by such Contributor that are necessarily infringed by their
Contribution(s) alone or by combination of their Contribution(s)
with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the Work
or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses
granted to You under this License for that Work shall terminate
as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the
Work or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You
meet the following conditions:
(a) You must give any other recipients of the Work or
Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works
that You distribute, all copyright, patent, trademark, and
attribution notices from the Source form of the Work,
excluding those notices that do not pertain to any part of
the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its
distribution, then any Derivative Works that You distribute must
include a readable copy of the attribution notices contained
within such NOTICE file, excluding those notices that do not
pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed
as part of the Derivative Works; within the Source form or
documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and
wherever such third-party notices normally appear. The contents
of the NOTICE file are for informational purposes only and
do not modify the License. You may add Your own attribution
notices within Derivative Works that You distribute, alongside
or as an addendum to the NOTICE text from the Work, provided
that such additional attribution notices cannot be construed
as modifying the License.
You may add Your own copyright statement to Your modifications and
may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or
for any such Derivative Works as a whole, provided Your use,
reproduction, and distribution of the Work otherwise complies with
the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work
by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify
the terms of any separate license agreement you may have executed
with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing the
origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or
agreed to in writing, Licensor provides the Work (and each
Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions
of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory,
whether in tort (including negligence), contract, or otherwise,
unless required by applicable law (such as deliberate and grossly
negligent acts) or agreed to in writing, shall any Contributor be
liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a
result of this License or out of the use or inability to use the
Work (including but not limited to damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all
other commercial damages or losses), even if such Contributor
has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing
the Work or Derivative Works thereof, You may choose to offer,
and charge a fee for, acceptance of support, warranty, indemnity,
or other liability obligations and/or rights consistent with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf
of any other Contributor, and only if You agree to indemnify,
defend, and hold each Contributor harmless for any liability
incurred by, or claims asserted against, such Contributor by reason
of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following
boilerplate notice, with the fields enclosed by brackets "[]"
replaced with your own identifying information. (Don't include
the brackets!) The text should be enclosed in the appropriate
comment syntax for the file format. We also recommend that a
file or class name and description of purpose be included on the
same "printed page" as the copyright notice for easier
identification within third-party archives.
Copyright [2007] Neal Norwitz
Portions Copyright [2007] Google Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

@ -0,0 +1,34 @@
The Google Mock class generator is an application that is part of cppclean.
For more information about cppclean, visit http://code.google.com/p/cppclean/
The mock generator requires Python 2.3.5 or later. If you don't have Python
installed on your system, you will also need to install it. You can download
Python from: http://www.python.org/download/releases/
To use the Google Mock class generator, you need to call it
on the command line passing the header file and class for which you want
to generate a Google Mock class.
Make sure to install the scripts somewhere in your path. Then you can
run the program.
gmock_gen.py header-file.h [ClassName]...
If no ClassNames are specified, all classes in the file are emitted.
To change the indentation from the default of 2, set INDENT in
the environment. For example to use an indent of 4 spaces:
INDENT=4 gmock_gen.py header-file.h ClassName
This version was made from SVN revision 281 in the cppclean repository.
Known Limitations
-----------------
Not all code will be generated properly. For example, when mocking templated
classes, the template information is lost. You will need to add the template
information manually.
Not all permutations of using multiple pointers/references will be rendered
properly. These will also have to be fixed manually.

@ -0,0 +1,115 @@
Goal:
-----
CppClean attempts to find problems in C++ source that slow development
in large code bases, for example various forms of unused code.
Unused code can be unused functions, methods, data members, types, etc
to unnecessary #include directives. Unnecessary #includes can cause
considerable extra compiles increasing the edit-compile-run cycle.
The project home page is: http://code.google.com/p/cppclean/
Features:
---------
* Find and print C++ language constructs: classes, methods, functions, etc.
* Find classes with virtual methods, no virtual destructor, and no bases
* Find global/static data that are potential problems when using threads
* Unnecessary forward class declarations
* Unnecessary function declarations
* Undeclared function definitions
* (planned) Find unnecessary header files #included
- No direct reference to anything in the header
- Header is unnecessary if classes were forward declared instead
* (planned) Source files that reference headers not directly #included,
ie, files that rely on a transitive #include from another header
* (planned) Unused members (private, protected, & public) methods and data
* (planned) Store AST in a SQL database so relationships can be queried
AST is Abstract Syntax Tree, a representation of parsed source code.
http://en.wikipedia.org/wiki/Abstract_syntax_tree
System Requirements:
--------------------
* Python 2.4 or later (2.3 probably works too)
* Works on Windows (untested), Mac OS X, and Unix
How to Run:
-----------
For all examples, it is assumed that cppclean resides in a directory called
/cppclean.
To print warnings for classes with virtual methods, no virtual destructor and
no base classes:
/cppclean/run.sh nonvirtual_dtors.py file1.h file2.h file3.cc ...
To print all the functions defined in header file(s):
/cppclean/run.sh functions.py file1.h file2.h ...
All the commands take multiple files on the command line. Other programs
include: find_warnings, headers, methods, and types. Some other programs
are available, but used primarily for debugging.
run.sh is a simple wrapper that sets PYTHONPATH to /cppclean and then
runs the program in /cppclean/cpp/PROGRAM.py. There is currently
no equivalent for Windows. Contributions for a run.bat file
would be greatly appreciated.
How to Configure:
-----------------
You can add a siteheaders.py file in /cppclean/cpp to configure where
to look for other headers (typically -I options passed to a compiler).
Currently two values are supported: _TRANSITIVE and GetIncludeDirs.
_TRANSITIVE should be set to a boolean value (True or False) indicating
whether to transitively process all header files. The default is False.
GetIncludeDirs is a function that takes a single argument and returns
a sequence of directories to include. This can be a generator or
return a static list.
def GetIncludeDirs(filename):
return ['/some/path/with/other/headers']
# Here is a more complicated example.
def GetIncludeDirs(filename):
yield '/path1'
yield os.path.join('/path2', os.path.dirname(filename))
yield '/path3'
How to Test:
------------
For all examples, it is assumed that cppclean resides in a directory called
/cppclean. The tests require
cd /cppclean
make test
# To generate expected results after a change:
make expected
Current Status:
---------------
The parser works pretty well for header files, parsing about 99% of Google's
header files. Anything which inspects structure of C++ source files should
work reasonably well. Function bodies are not transformed to an AST,
but left as tokens. Much work is still needed on finding unused header files
and storing an AST in a database.
Non-goals:
----------
* Parsing all valid C++ source
* Handling invalid C++ source gracefully
* Compiling to machine code (or anything beyond an AST)
Contact:
--------
If you used cppclean, I would love to hear about your experiences
cppclean@googlegroups.com. Even if you don't use cppclean, I'd like to
hear from you. :-) (You can contact me directly at: nnorwitz@gmail.com)

File diff suppressed because it is too large Load Diff

@ -0,0 +1,227 @@
#!/usr/bin/env python
#
# Copyright 2008 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""Generate Google Mock classes from base classes.
This program will read in a C++ source file and output the Google Mock
classes for the specified classes. If no class is specified, all
classes in the source file are emitted.
Usage:
gmock_class.py header-file.h [ClassName]...
Output is sent to stdout.
"""
__author__ = 'nnorwitz@google.com (Neal Norwitz)'
import os
import re
import sys
from cpp import ast
from cpp import utils
# Preserve compatibility with Python 2.3.
try:
_dummy = set
except NameError:
import sets
set = sets.Set
_VERSION = (1, 0, 1) # The version of this script.
# How many spaces to indent. Can set me with the INDENT environment variable.
_INDENT = 2
def _GenerateMethods(output_lines, source, class_node):
function_type = (ast.FUNCTION_VIRTUAL | ast.FUNCTION_PURE_VIRTUAL |
ast.FUNCTION_OVERRIDE)
ctor_or_dtor = ast.FUNCTION_CTOR | ast.FUNCTION_DTOR
indent = ' ' * _INDENT
for node in class_node.body:
# We only care about virtual functions.
if (isinstance(node, ast.Function) and
node.modifiers & function_type and
not node.modifiers & ctor_or_dtor):
# Pick out all the elements we need from the original function.
const = ''
if node.modifiers & ast.FUNCTION_CONST:
const = 'CONST_'
return_type = 'void'
if node.return_type:
# Add modifiers like 'const'.
modifiers = ''
if node.return_type.modifiers:
modifiers = ' '.join(node.return_type.modifiers) + ' '
return_type = modifiers + node.return_type.name
template_args = [arg.name for arg in node.return_type.templated_types]
if template_args:
return_type += '<' + ', '.join(template_args) + '>'
if len(template_args) > 1:
for line in [
'// The following line won\'t really compile, as the return',
'// type has multiple template arguments. To fix it, use a',
'// typedef for the return type.']:
output_lines.append(indent + line)
if node.return_type.pointer:
return_type += '*'
if node.return_type.reference:
return_type += '&'
num_parameters = len(node.parameters)
if len(node.parameters) == 1:
first_param = node.parameters[0]
if source[first_param.start:first_param.end].strip() == 'void':
# We must treat T(void) as a function with no parameters.
num_parameters = 0
tmpl = ''
if class_node.templated_types:
tmpl = '_T'
mock_method_macro = 'MOCK_%sMETHOD%d%s' % (const, num_parameters, tmpl)
args = ''
if node.parameters:
# Due to the parser limitations, it is impossible to keep comments
# while stripping the default parameters. When defaults are
# present, we choose to strip them and comments (and produce
# compilable code).
# TODO(nnorwitz@google.com): Investigate whether it is possible to
# preserve parameter name when reconstructing parameter text from
# the AST.
if len([param for param in node.parameters if param.default]) > 0:
args = ', '.join(param.type.name for param in node.parameters)
else:
# Get the full text of the parameters from the start
# of the first parameter to the end of the last parameter.
start = node.parameters[0].start
end = node.parameters[-1].end
# Remove // comments.
args_strings = re.sub(r'//.*', '', source[start:end])
# Condense multiple spaces and eliminate newlines putting the
# parameters together on a single line. Ensure there is a
# space in an argument which is split by a newline without
# intervening whitespace, e.g.: int\nBar
args = re.sub(' +', ' ', args_strings.replace('\n', ' '))
# Create the mock method definition.
output_lines.extend(['%s%s(%s,' % (indent, mock_method_macro, node.name),
'%s%s(%s));' % (indent*3, return_type, args)])
def _GenerateMocks(filename, source, ast_list, desired_class_names):
processed_class_names = set()
lines = []
for node in ast_list:
if (isinstance(node, ast.Class) and node.body and
# desired_class_names being None means that all classes are selected.
(not desired_class_names or node.name in desired_class_names)):
class_name = node.name
parent_name = class_name
processed_class_names.add(class_name)
class_node = node
# Add namespace before the class.
if class_node.namespace:
lines.extend(['namespace %s {' % n for n in class_node.namespace]) # }
lines.append('')
# Add template args for templated classes.
if class_node.templated_types:
# TODO(paulchang): The AST doesn't preserve template argument order,
# so we have to make up names here.
# TODO(paulchang): Handle non-type template arguments (e.g.
# template<typename T, int N>).
template_arg_count = len(class_node.templated_types.keys())
template_args = ['T%d' % n for n in range(template_arg_count)]
template_decls = ['typename ' + arg for arg in template_args]
lines.append('template <' + ', '.join(template_decls) + '>')
parent_name += '<' + ', '.join(template_args) + '>'
# Add the class prolog.
lines.append('class Mock%s : public %s {' # }
% (class_name, parent_name))
lines.append('%spublic:' % (' ' * (_INDENT // 2)))
# Add all the methods.
_GenerateMethods(lines, source, class_node)
# Close the class.
if lines:
# If there are no virtual methods, no need for a public label.
if len(lines) == 2:
del lines[-1]
# Only close the class if there really is a class.
lines.append('};')
lines.append('') # Add an extra newline.
# Close the namespace.
if class_node.namespace:
for i in range(len(class_node.namespace)-1, -1, -1):
lines.append('} // namespace %s' % class_node.namespace[i])
lines.append('') # Add an extra newline.
if desired_class_names:
missing_class_name_list = list(desired_class_names - processed_class_names)
if missing_class_name_list:
missing_class_name_list.sort()
sys.stderr.write('Class(es) not found in %s: %s\n' %
(filename, ', '.join(missing_class_name_list)))
elif not processed_class_names:
sys.stderr.write('No class found in %s\n' % filename)
return lines
def main(argv=sys.argv):
if len(argv) < 2:
sys.stderr.write('Google Mock Class Generator v%s\n\n' %
'.'.join(map(str, _VERSION)))
sys.stderr.write(__doc__)
return 1
global _INDENT
try:
_INDENT = int(os.environ['INDENT'])
except KeyError:
pass
except:
sys.stderr.write('Unable to use indent of %s\n' % os.environ.get('INDENT'))
filename = argv[1]
desired_class_names = None # None means all classes in the source file.
if len(argv) >= 3:
desired_class_names = set(argv[2:])
source = utils.ReadFile(filename)
if source is None:
return 1
builder = ast.BuilderFromSource(source, filename)
try:
entire_ast = filter(None, builder.Generate())
except KeyboardInterrupt:
return
except:
# An error message was already printed since we couldn't parse.
sys.exit(1)
else:
lines = _GenerateMocks(filename, source, entire_ast, desired_class_names)
sys.stdout.write('\n'.join(lines))
if __name__ == '__main__':
main(sys.argv)

@ -0,0 +1,466 @@
#!/usr/bin/env python
#
# Copyright 2009 Neal Norwitz All Rights Reserved.
# Portions Copyright 2009 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""Tests for gmock.scripts.generator.cpp.gmock_class."""
__author__ = 'nnorwitz@google.com (Neal Norwitz)'
import os
import sys
import unittest
# Allow the cpp imports below to work when run as a standalone script.
sys.path.append(os.path.join(os.path.dirname(__file__), '..'))
from cpp import ast
from cpp import gmock_class
class TestCase(unittest.TestCase):
"""Helper class that adds assert methods."""
def StripLeadingWhitespace(self, lines):
"""Strip leading whitespace in each line in 'lines'."""
return '\n'.join([s.lstrip() for s in lines.split('\n')])
def assertEqualIgnoreLeadingWhitespace(self, expected_lines, lines):
"""Specialized assert that ignores the indent level."""
self.assertEqual(expected_lines, self.StripLeadingWhitespace(lines))
class GenerateMethodsTest(TestCase):
def GenerateMethodSource(self, cpp_source):
"""Convert C++ source to Google Mock output source lines."""
method_source_lines = []
# <test> is a pseudo-filename, it is not read or written.
builder = ast.BuilderFromSource(cpp_source, '<test>')
ast_list = list(builder.Generate())
gmock_class._GenerateMethods(method_source_lines, cpp_source, ast_list[0])
return '\n'.join(method_source_lines)
def testSimpleMethod(self):
source = """
class Foo {
public:
virtual int Bar();
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD0(Bar,\nint());',
self.GenerateMethodSource(source))
def testSimpleConstructorsAndDestructor(self):
source = """
class Foo {
public:
Foo();
Foo(int x);
Foo(const Foo& f);
Foo(Foo&& f);
~Foo();
virtual int Bar() = 0;
};
"""
# The constructors and destructor should be ignored.
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD0(Bar,\nint());',
self.GenerateMethodSource(source))
def testVirtualDestructor(self):
source = """
class Foo {
public:
virtual ~Foo();
virtual int Bar() = 0;
};
"""
# The destructor should be ignored.
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD0(Bar,\nint());',
self.GenerateMethodSource(source))
def testExplicitlyDefaultedConstructorsAndDestructor(self):
source = """
class Foo {
public:
Foo() = default;
Foo(const Foo& f) = default;
Foo(Foo&& f) = default;
~Foo() = default;
virtual int Bar() = 0;
};
"""
# The constructors and destructor should be ignored.
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD0(Bar,\nint());',
self.GenerateMethodSource(source))
def testExplicitlyDeletedConstructorsAndDestructor(self):
source = """
class Foo {
public:
Foo() = delete;
Foo(const Foo& f) = delete;
Foo(Foo&& f) = delete;
~Foo() = delete;
virtual int Bar() = 0;
};
"""
# The constructors and destructor should be ignored.
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD0(Bar,\nint());',
self.GenerateMethodSource(source))
def testSimpleOverrideMethod(self):
source = """
class Foo {
public:
int Bar() override;
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD0(Bar,\nint());',
self.GenerateMethodSource(source))
def testSimpleConstMethod(self):
source = """
class Foo {
public:
virtual void Bar(bool flag) const;
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_CONST_METHOD1(Bar,\nvoid(bool flag));',
self.GenerateMethodSource(source))
def testExplicitVoid(self):
source = """
class Foo {
public:
virtual int Bar(void);
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD0(Bar,\nint(void));',
self.GenerateMethodSource(source))
def testStrangeNewlineInParameter(self):
source = """
class Foo {
public:
virtual void Bar(int
a) = 0;
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD1(Bar,\nvoid(int a));',
self.GenerateMethodSource(source))
def testDefaultParameters(self):
source = """
class Foo {
public:
virtual void Bar(int a, char c = 'x') = 0;
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD2(Bar,\nvoid(int, char));',
self.GenerateMethodSource(source))
def testMultipleDefaultParameters(self):
source = """
class Foo {
public:
virtual void Bar(int a = 42, char c = 'x') = 0;
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD2(Bar,\nvoid(int, char));',
self.GenerateMethodSource(source))
def testRemovesCommentsWhenDefaultsArePresent(self):
source = """
class Foo {
public:
virtual void Bar(int a = 42 /* a comment */,
char /* other comment */ c= 'x') = 0;
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD2(Bar,\nvoid(int, char));',
self.GenerateMethodSource(source))
def testDoubleSlashCommentsInParameterListAreRemoved(self):
source = """
class Foo {
public:
virtual void Bar(int a, // inline comments should be elided.
int b // inline comments should be elided.
) const = 0;
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_CONST_METHOD2(Bar,\nvoid(int a, int b));',
self.GenerateMethodSource(source))
def testCStyleCommentsInParameterListAreNotRemoved(self):
# NOTE(nnorwitz): I'm not sure if it's the best behavior to keep these
# comments. Also note that C style comments after the last parameter
# are still elided.
source = """
class Foo {
public:
virtual const string& Bar(int /* keeper */, int b);
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD2(Bar,\nconst string&(int /* keeper */, int b));',
self.GenerateMethodSource(source))
def testArgsOfTemplateTypes(self):
source = """
class Foo {
public:
virtual int Bar(const vector<int>& v, map<int, string>* output);
};"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD2(Bar,\n'
'int(const vector<int>& v, map<int, string>* output));',
self.GenerateMethodSource(source))
def testReturnTypeWithOneTemplateArg(self):
source = """
class Foo {
public:
virtual vector<int>* Bar(int n);
};"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD1(Bar,\nvector<int>*(int n));',
self.GenerateMethodSource(source))
def testReturnTypeWithManyTemplateArgs(self):
source = """
class Foo {
public:
virtual map<int, string> Bar();
};"""
# Comparing the comment text is brittle - we'll think of something
# better in case this gets annoying, but for now let's keep it simple.
self.assertEqualIgnoreLeadingWhitespace(
'// The following line won\'t really compile, as the return\n'
'// type has multiple template arguments. To fix it, use a\n'
'// typedef for the return type.\n'
'MOCK_METHOD0(Bar,\nmap<int, string>());',
self.GenerateMethodSource(source))
def testSimpleMethodInTemplatedClass(self):
source = """
template<class T>
class Foo {
public:
virtual int Bar();
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD0_T(Bar,\nint());',
self.GenerateMethodSource(source))
def testPointerArgWithoutNames(self):
source = """
class Foo {
virtual int Bar(C*);
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD1(Bar,\nint(C*));',
self.GenerateMethodSource(source))
def testReferenceArgWithoutNames(self):
source = """
class Foo {
virtual int Bar(C&);
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD1(Bar,\nint(C&));',
self.GenerateMethodSource(source))
def testArrayArgWithoutNames(self):
source = """
class Foo {
virtual int Bar(C[]);
};
"""
self.assertEqualIgnoreLeadingWhitespace(
'MOCK_METHOD1(Bar,\nint(C[]));',
self.GenerateMethodSource(source))
class GenerateMocksTest(TestCase):
def GenerateMocks(self, cpp_source):
"""Convert C++ source to complete Google Mock output source."""
# <test> is a pseudo-filename, it is not read or written.
filename = '<test>'
builder = ast.BuilderFromSource(cpp_source, filename)
ast_list = list(builder.Generate())
lines = gmock_class._GenerateMocks(filename, cpp_source, ast_list, None)
return '\n'.join(lines)
def testNamespaces(self):
source = """
namespace Foo {
namespace Bar { class Forward; }
namespace Baz {
class Test {
public:
virtual void Foo();
};
} // namespace Baz
} // namespace Foo
"""
expected = """\
namespace Foo {
namespace Baz {
class MockTest : public Test {
public:
MOCK_METHOD0(Foo,
void());
};
} // namespace Baz
} // namespace Foo
"""
self.assertEqualIgnoreLeadingWhitespace(
expected, self.GenerateMocks(source))
def testClassWithStorageSpecifierMacro(self):
source = """
class STORAGE_SPECIFIER Test {
public:
virtual void Foo();
};
"""
expected = """\
class MockTest : public Test {
public:
MOCK_METHOD0(Foo,
void());
};
"""
self.assertEqualIgnoreLeadingWhitespace(
expected, self.GenerateMocks(source))
def testTemplatedForwardDeclaration(self):
source = """
template <class T> class Forward; // Forward declaration should be ignored.
class Test {
public:
virtual void Foo();
};
"""
expected = """\
class MockTest : public Test {
public:
MOCK_METHOD0(Foo,
void());
};
"""
self.assertEqualIgnoreLeadingWhitespace(
expected, self.GenerateMocks(source))
def testTemplatedClass(self):
source = """
template <typename S, typename T>
class Test {
public:
virtual void Foo();
};
"""
expected = """\
template <typename T0, typename T1>
class MockTest : public Test<T0, T1> {
public:
MOCK_METHOD0_T(Foo,
void());
};
"""
self.assertEqualIgnoreLeadingWhitespace(
expected, self.GenerateMocks(source))
def testTemplateInATemplateTypedef(self):
source = """
class Test {
public:
typedef std::vector<std::list<int>> FooType;
virtual void Bar(const FooType& test_arg);
};
"""
expected = """\
class MockTest : public Test {
public:
MOCK_METHOD1(Bar,
void(const FooType& test_arg));
};
"""
self.assertEqualIgnoreLeadingWhitespace(
expected, self.GenerateMocks(source))
def testTemplateInATemplateTypedefWithComma(self):
source = """
class Test {
public:
typedef std::function<void(
const vector<std::list<int>>&, int> FooType;
virtual void Bar(const FooType& test_arg);
};
"""
expected = """\
class MockTest : public Test {
public:
MOCK_METHOD1(Bar,
void(const FooType& test_arg));
};
"""
self.assertEqualIgnoreLeadingWhitespace(
expected, self.GenerateMocks(source))
def testEnumClass(self):
source = """
class Test {
public:
enum class Baz { BAZINGA };
virtual void Bar(const FooType& test_arg);
};
"""
expected = """\
class MockTest : public Test {
public:
MOCK_METHOD1(Bar,
void(const FooType& test_arg));
};
"""
self.assertEqualIgnoreLeadingWhitespace(
expected, self.GenerateMocks(source))
if __name__ == '__main__':
unittest.main()

@ -0,0 +1,59 @@
#!/usr/bin/env python
#
# Copyright 2007 Neal Norwitz
# Portions Copyright 2007 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""C++ keywords and helper utilities for determining keywords."""
__author__ = 'nnorwitz@google.com (Neal Norwitz)'
try:
# Python 3.x
import builtins
except ImportError:
# Python 2.x
import __builtin__ as builtins
if not hasattr(builtins, 'set'):
# Nominal support for Python 2.3.
from sets import Set as set
TYPES = set('bool char int long short double float void wchar_t unsigned signed'.split())
TYPE_MODIFIERS = set('auto register const inline extern static virtual volatile mutable'.split())
ACCESS = set('public protected private friend'.split())
CASTS = set('static_cast const_cast dynamic_cast reinterpret_cast'.split())
OTHERS = set('true false asm class namespace using explicit this operator sizeof'.split())
OTHER_TYPES = set('new delete typedef struct union enum typeid typename template'.split())
CONTROL = set('case switch default if else return goto'.split())
EXCEPTION = set('try catch throw'.split())
LOOP = set('while do for break continue'.split())
ALL = TYPES | TYPE_MODIFIERS | ACCESS | CASTS | OTHERS | OTHER_TYPES | CONTROL | EXCEPTION | LOOP
def IsKeyword(token):
return token in ALL
def IsBuiltinType(token):
if token in ('virtual', 'inline'):
# These only apply to methods, they can't be types by themselves.
return False
return token in TYPES or token in TYPE_MODIFIERS

@ -0,0 +1,287 @@
#!/usr/bin/env python
#
# Copyright 2007 Neal Norwitz
# Portions Copyright 2007 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""Tokenize C++ source code."""
__author__ = 'nnorwitz@google.com (Neal Norwitz)'
try:
# Python 3.x
import builtins
except ImportError:
# Python 2.x
import __builtin__ as builtins
import sys
from cpp import utils
if not hasattr(builtins, 'set'):
# Nominal support for Python 2.3.
from sets import Set as set
# Add $ as a valid identifier char since so much code uses it.
_letters = 'abcdefghijklmnopqrstuvwxyz'
VALID_IDENTIFIER_CHARS = set(_letters + _letters.upper() + '_0123456789$')
HEX_DIGITS = set('0123456789abcdefABCDEF')
INT_OR_FLOAT_DIGITS = set('01234567890eE-+')
# C++0x string preffixes.
_STR_PREFIXES = set(('R', 'u8', 'u8R', 'u', 'uR', 'U', 'UR', 'L', 'LR'))
# Token types.
UNKNOWN = 'UNKNOWN'
SYNTAX = 'SYNTAX'
CONSTANT = 'CONSTANT'
NAME = 'NAME'
PREPROCESSOR = 'PREPROCESSOR'
# Where the token originated from. This can be used for backtracking.
# It is always set to WHENCE_STREAM in this code.
WHENCE_STREAM, WHENCE_QUEUE = range(2)
class Token(object):
"""Data container to represent a C++ token.
Tokens can be identifiers, syntax char(s), constants, or
pre-processor directives.
start contains the index of the first char of the token in the source
end contains the index of the last char of the token in the source
"""
def __init__(self, token_type, name, start, end):
self.token_type = token_type
self.name = name
self.start = start
self.end = end
self.whence = WHENCE_STREAM
def __str__(self):
if not utils.DEBUG:
return 'Token(%r)' % self.name
return 'Token(%r, %s, %s)' % (self.name, self.start, self.end)
__repr__ = __str__
def _GetString(source, start, i):
i = source.find('"', i+1)
while source[i-1] == '\\':
# Count the trailing backslashes.
backslash_count = 1
j = i - 2
while source[j] == '\\':
backslash_count += 1
j -= 1
# When trailing backslashes are even, they escape each other.
if (backslash_count % 2) == 0:
break
i = source.find('"', i+1)
return i + 1
def _GetChar(source, start, i):
# NOTE(nnorwitz): may not be quite correct, should be good enough.
i = source.find("'", i+1)
while source[i-1] == '\\':
# Need to special case '\\'.
if (i - 2) > start and source[i-2] == '\\':
break
i = source.find("'", i+1)
# Try to handle unterminated single quotes (in a #if 0 block).
if i < 0:
i = start
return i + 1
def GetTokens(source):
"""Returns a sequence of Tokens.
Args:
source: string of C++ source code.
Yields:
Token that represents the next token in the source.
"""
# Cache various valid character sets for speed.
valid_identifier_chars = VALID_IDENTIFIER_CHARS
hex_digits = HEX_DIGITS
int_or_float_digits = INT_OR_FLOAT_DIGITS
int_or_float_digits2 = int_or_float_digits | set('.')
# Only ignore errors while in a #if 0 block.
ignore_errors = False
count_ifs = 0
i = 0
end = len(source)
while i < end:
# Skip whitespace.
while i < end and source[i].isspace():
i += 1
if i >= end:
return
token_type = UNKNOWN
start = i
c = source[i]
if c.isalpha() or c == '_': # Find a string token.
token_type = NAME
while source[i] in valid_identifier_chars:
i += 1
# String and character constants can look like a name if
# they are something like L"".
if (source[i] == "'" and (i - start) == 1 and
source[start:i] in 'uUL'):
# u, U, and L are valid C++0x character preffixes.
token_type = CONSTANT
i = _GetChar(source, start, i)
elif source[i] == "'" and source[start:i] in _STR_PREFIXES:
token_type = CONSTANT
i = _GetString(source, start, i)
elif c == '/' and source[i+1] == '/': # Find // comments.
i = source.find('\n', i)
if i == -1: # Handle EOF.
i = end
continue
elif c == '/' and source[i+1] == '*': # Find /* comments. */
i = source.find('*/', i) + 2
continue
elif c in ':+-<>&|*=': # : or :: (plus other chars).
token_type = SYNTAX
i += 1
new_ch = source[i]
if new_ch == c and c != '>': # Treat ">>" as two tokens.
i += 1
elif c == '-' and new_ch == '>':
i += 1
elif new_ch == '=':
i += 1
elif c in '()[]{}~!?^%;/.,': # Handle single char tokens.
token_type = SYNTAX
i += 1
if c == '.' and source[i].isdigit():
token_type = CONSTANT
i += 1
while source[i] in int_or_float_digits:
i += 1
# Handle float suffixes.
for suffix in ('l', 'f'):
if suffix == source[i:i+1].lower():
i += 1
break
elif c.isdigit(): # Find integer.
token_type = CONSTANT
if c == '0' and source[i+1] in 'xX':
# Handle hex digits.
i += 2
while source[i] in hex_digits:
i += 1
else:
while source[i] in int_or_float_digits2:
i += 1
# Handle integer (and float) suffixes.
for suffix in ('ull', 'll', 'ul', 'l', 'f', 'u'):
size = len(suffix)
if suffix == source[i:i+size].lower():
i += size
break
elif c == '"': # Find string.
token_type = CONSTANT
i = _GetString(source, start, i)
elif c == "'": # Find char.
token_type = CONSTANT
i = _GetChar(source, start, i)
elif c == '#': # Find pre-processor command.
token_type = PREPROCESSOR
got_if = source[i:i+3] == '#if' and source[i+3:i+4].isspace()
if got_if:
count_ifs += 1
elif source[i:i+6] == '#endif':
count_ifs -= 1
if count_ifs == 0:
ignore_errors = False
# TODO(nnorwitz): handle preprocessor statements (\ continuations).
while 1:
i1 = source.find('\n', i)
i2 = source.find('//', i)
i3 = source.find('/*', i)
i4 = source.find('"', i)
# NOTE(nnorwitz): doesn't handle comments in #define macros.
# Get the first important symbol (newline, comment, EOF/end).
i = min([x for x in (i1, i2, i3, i4, end) if x != -1])
# Handle #include "dir//foo.h" properly.
if source[i] == '"':
i = source.find('"', i+1) + 1
assert i > 0
continue
# Keep going if end of the line and the line ends with \.
if not (i == i1 and source[i-1] == '\\'):
if got_if:
condition = source[start+4:i].lstrip()
if (condition.startswith('0') or
condition.startswith('(0)')):
ignore_errors = True
break
i += 1
elif c == '\\': # Handle \ in code.
# This is different from the pre-processor \ handling.
i += 1
continue
elif ignore_errors:
# The tokenizer seems to be in pretty good shape. This
# raise is conditionally disabled so that bogus code
# in an #if 0 block can be handled. Since we will ignore
# it anyways, this is probably fine. So disable the
# exception and return the bogus char.
i += 1
else:
sys.stderr.write('Got invalid token in %s @ %d token:%s: %r\n' %
('?', i, c, source[i-10:i+10]))
raise RuntimeError('unexpected token')
if i <= 0:
print('Invalid index, exiting now.')
return
yield Token(token_type, source[start:i], start, i)
if __name__ == '__main__':
def main(argv):
"""Driver mostly for testing purposes."""
for filename in argv[1:]:
source = utils.ReadFile(filename)
if source is None:
continue
for token in GetTokens(source):
print('%-12s: %s' % (token.token_type, token.name))
# print('\r%6.2f%%' % (100.0 * index / token.end),)
sys.stdout.write('\n')
main(sys.argv)

@ -0,0 +1,41 @@
#!/usr/bin/env python
#
# Copyright 2007 Neal Norwitz
# Portions Copyright 2007 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""Generic utilities for C++ parsing."""
__author__ = 'nnorwitz@google.com (Neal Norwitz)'
import sys
# Set to True to see the start/end token indices.
DEBUG = True
def ReadFile(filename, print_error=True):
"""Returns the contents of a file."""
try:
fp = open(filename)
try:
return fp.read()
finally:
fp.close()
except IOError:
if print_error:
print('Error reading %s: %s' % (filename, sys.exc_info()[1]))
return None

@ -0,0 +1,31 @@
#!/usr/bin/env python
#
# Copyright 2008 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""Driver for starting up Google Mock class generator."""
__author__ = 'nnorwitz@google.com (Neal Norwitz)'
import os
import sys
if __name__ == '__main__':
# Add the directory of this script to the path so we can import gmock_class.
sys.path.append(os.path.dirname(__file__))
from cpp import gmock_class
# Fix the docstring in case they require the usage.
gmock_class.__doc__ = gmock_class.__doc__.replace('gmock_class.py', __file__)
gmock_class.main()

@ -0,0 +1,303 @@
#!/bin/sh
# These variables are automatically filled in by the configure script.
name="@PACKAGE_TARNAME@"
version="@PACKAGE_VERSION@"
show_usage()
{
echo "Usage: gmock-config [OPTIONS...]"
}
show_help()
{
show_usage
cat <<\EOF
The `gmock-config' script provides access to the necessary compile and linking
flags to connect with Google C++ Mocking Framework, both in a build prior to
installation, and on the system proper after installation. The installation
overrides may be issued in combination with any other queries, but will only
affect installation queries if called on a built but not installed gmock. The
installation queries may not be issued with any other types of queries, and
only one installation query may be made at a time. The version queries and
compiler flag queries may be combined as desired but not mixed. Different
version queries are always combined with logical "and" semantics, and only the
last of any particular query is used while all previous ones ignored. All
versions must be specified as a sequence of numbers separated by periods.
Compiler flag queries output the union of the sets of flags when combined.
Examples:
gmock-config --min-version=1.0 || echo "Insufficient Google Mock version."
g++ $(gmock-config --cppflags --cxxflags) -o foo.o -c foo.cpp
g++ $(gmock-config --ldflags --libs) -o foo foo.o
# When using a built but not installed Google Mock:
g++ $(../../my_gmock_build/scripts/gmock-config ...) ...
# When using an installed Google Mock, but with installation overrides:
export GMOCK_PREFIX="/opt"
g++ $(gmock-config --libdir="/opt/lib64" ...) ...
Help:
--usage brief usage information
--help display this help message
Installation Overrides:
--prefix=<dir> overrides the installation prefix
--exec-prefix=<dir> overrides the executable installation prefix
--libdir=<dir> overrides the library installation prefix
--includedir=<dir> overrides the header file installation prefix
Installation Queries:
--prefix installation prefix
--exec-prefix executable installation prefix
--libdir library installation directory
--includedir header file installation directory
--version the version of the Google Mock installation
Version Queries:
--min-version=VERSION return 0 if the version is at least VERSION
--exact-version=VERSION return 0 if the version is exactly VERSION
--max-version=VERSION return 0 if the version is at most VERSION
Compilation Flag Queries:
--cppflags compile flags specific to the C-like preprocessors
--cxxflags compile flags appropriate for C++ programs
--ldflags linker flags
--libs libraries for linking
EOF
}
# This function bounds our version with a min and a max. It uses some clever
# POSIX-compliant variable expansion to portably do all the work in the shell
# and avoid any dependency on a particular "sed" or "awk" implementation.
# Notable is that it will only ever compare the first 3 components of versions.
# Further components will be cleanly stripped off. All versions must be
# unadorned, so "v1.0" will *not* work. The minimum version must be in $1, and
# the max in $2. TODO(chandlerc@google.com): If this ever breaks, we should
# investigate expanding this via autom4te from AS_VERSION_COMPARE rather than
# continuing to maintain our own shell version.
check_versions()
{
major_version=${version%%.*}
minor_version="0"
point_version="0"
if test "${version#*.}" != "${version}"; then
minor_version=${version#*.}
minor_version=${minor_version%%.*}
fi
if test "${version#*.*.}" != "${version}"; then
point_version=${version#*.*.}
point_version=${point_version%%.*}
fi
min_version="$1"
min_major_version=${min_version%%.*}
min_minor_version="0"
min_point_version="0"
if test "${min_version#*.}" != "${min_version}"; then
min_minor_version=${min_version#*.}
min_minor_version=${min_minor_version%%.*}
fi
if test "${min_version#*.*.}" != "${min_version}"; then
min_point_version=${min_version#*.*.}
min_point_version=${min_point_version%%.*}
fi
max_version="$2"
max_major_version=${max_version%%.*}
max_minor_version="0"
max_point_version="0"
if test "${max_version#*.}" != "${max_version}"; then
max_minor_version=${max_version#*.}
max_minor_version=${max_minor_version%%.*}
fi
if test "${max_version#*.*.}" != "${max_version}"; then
max_point_version=${max_version#*.*.}
max_point_version=${max_point_version%%.*}
fi
test $(($major_version)) -lt $(($min_major_version)) && exit 1
if test $(($major_version)) -eq $(($min_major_version)); then
test $(($minor_version)) -lt $(($min_minor_version)) && exit 1
if test $(($minor_version)) -eq $(($min_minor_version)); then
test $(($point_version)) -lt $(($min_point_version)) && exit 1
fi
fi
test $(($major_version)) -gt $(($max_major_version)) && exit 1
if test $(($major_version)) -eq $(($max_major_version)); then
test $(($minor_version)) -gt $(($max_minor_version)) && exit 1
if test $(($minor_version)) -eq $(($max_minor_version)); then
test $(($point_version)) -gt $(($max_point_version)) && exit 1
fi
fi
exit 0
}
# Show the usage line when no arguments are specified.
if test $# -eq 0; then
show_usage
exit 1
fi
while test $# -gt 0; do
case $1 in
--usage) show_usage; exit 0;;
--help) show_help; exit 0;;
# Installation overrides
--prefix=*) GMOCK_PREFIX=${1#--prefix=};;
--exec-prefix=*) GMOCK_EXEC_PREFIX=${1#--exec-prefix=};;
--libdir=*) GMOCK_LIBDIR=${1#--libdir=};;
--includedir=*) GMOCK_INCLUDEDIR=${1#--includedir=};;
# Installation queries
--prefix|--exec-prefix|--libdir|--includedir|--version)
if test -n "${do_query}"; then
show_usage
exit 1
fi
do_query=${1#--}
;;
# Version checking
--min-version=*)
do_check_versions=yes
min_version=${1#--min-version=}
;;
--max-version=*)
do_check_versions=yes
max_version=${1#--max-version=}
;;
--exact-version=*)
do_check_versions=yes
exact_version=${1#--exact-version=}
;;
# Compiler flag output
--cppflags) echo_cppflags=yes;;
--cxxflags) echo_cxxflags=yes;;
--ldflags) echo_ldflags=yes;;
--libs) echo_libs=yes;;
# Everything else is an error
*) show_usage; exit 1;;
esac
shift
done
# These have defaults filled in by the configure script but can also be
# overridden by environment variables or command line parameters.
prefix="${GMOCK_PREFIX:-@prefix@}"
exec_prefix="${GMOCK_EXEC_PREFIX:-@exec_prefix@}"
libdir="${GMOCK_LIBDIR:-@libdir@}"
includedir="${GMOCK_INCLUDEDIR:-@includedir@}"
# We try and detect if our binary is not located at its installed location. If
# it's not, we provide variables pointing to the source and build tree rather
# than to the install tree. We also locate Google Test using the configured
# gtest-config script rather than searching the PATH and our bindir for one.
# This allows building against a just-built gmock rather than an installed
# gmock.
bindir="@bindir@"
this_relative_bindir=`dirname $0`
this_bindir=`cd ${this_relative_bindir}; pwd -P`
if test "${this_bindir}" = "${this_bindir%${bindir}}"; then
# The path to the script doesn't end in the bindir sequence from Autoconf,
# assume that we are in a build tree.
build_dir=`dirname ${this_bindir}`
src_dir=`cd ${this_bindir}/@top_srcdir@; pwd -P`
# TODO(chandlerc@google.com): This is a dangerous dependency on libtool, we
# should work to remove it, and/or remove libtool altogether, replacing it
# with direct references to the library and a link path.
gmock_libs="${build_dir}/lib/libgmock.la"
gmock_ldflags=""
# We provide hooks to include from either the source or build dir, where the
# build dir is always preferred. This will potentially allow us to write
# build rules for generated headers and have them automatically be preferred
# over provided versions.
gmock_cppflags="-I${build_dir}/include -I${src_dir}/include"
gmock_cxxflags=""
# Directly invoke the gtest-config script used during the build process.
gtest_config="@GTEST_CONFIG@"
else
# We're using an installed gmock, although it may be staged under some
# prefix. Assume (as our own libraries do) that we can resolve the prefix,
# and are present in the dynamic link paths.
gmock_ldflags="-L${libdir}"
gmock_libs="-l${name}"
gmock_cppflags="-I${includedir}"
gmock_cxxflags=""
# We also prefer any gtest-config script installed in our prefix. Lacking
# one, we look in the PATH for one.
gtest_config="${bindir}/gtest-config"
if test ! -x "${gtest_config}"; then
gtest_config=`which gtest-config`
fi
fi
# Ensure that we have located a Google Test to link against.
if ! test -x "${gtest_config}"; then
echo "Unable to locate Google Test, check your Google Mock configuration" \
"and installation" >&2
exit 1
elif ! "${gtest_config}" "--exact-version=@GTEST_VERSION@"; then
echo "The Google Test found is not the same version as Google Mock was " \
"built against" >&2
exit 1
fi
# Add the necessary Google Test bits into the various flag variables
gmock_cppflags="${gmock_cppflags} `${gtest_config} --cppflags`"
gmock_cxxflags="${gmock_cxxflags} `${gtest_config} --cxxflags`"
gmock_ldflags="${gmock_ldflags} `${gtest_config} --ldflags`"
gmock_libs="${gmock_libs} `${gtest_config} --libs`"
# Do an installation query if requested.
if test -n "$do_query"; then
case $do_query in
prefix) echo $prefix; exit 0;;
exec-prefix) echo $exec_prefix; exit 0;;
libdir) echo $libdir; exit 0;;
includedir) echo $includedir; exit 0;;
version) echo $version; exit 0;;
*) show_usage; exit 1;;
esac
fi
# Do a version check if requested.
if test "$do_check_versions" = "yes"; then
# Make sure we didn't receive a bad combination of parameters.
test "$echo_cppflags" = "yes" && show_usage && exit 1
test "$echo_cxxflags" = "yes" && show_usage && exit 1
test "$echo_ldflags" = "yes" && show_usage && exit 1
test "$echo_libs" = "yes" && show_usage && exit 1
if test "$exact_version" != ""; then
check_versions $exact_version $exact_version
# unreachable
else
check_versions ${min_version:-0.0.0} ${max_version:-9999.9999.9999}
# unreachable
fi
fi
# Do the output in the correct order so that these can be used in-line of
# a compiler invocation.
output=""
test "$echo_cppflags" = "yes" && output="$output $gmock_cppflags"
test "$echo_cxxflags" = "yes" && output="$output $gmock_cxxflags"
test "$echo_ldflags" = "yes" && output="$output $gmock_ldflags"
test "$echo_libs" = "yes" && output="$output $gmock_libs"
echo $output
exit 0

@ -0,0 +1,640 @@
#!/usr/bin/env python
#
# Copyright 2008, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
"""Converts compiler's errors in code using Google Mock to plain English."""
__author__ = 'wan@google.com (Zhanyong Wan)'
import re
import sys
_VERSION = '1.0.3'
_EMAIL = 'googlemock@googlegroups.com'
_COMMON_GMOCK_SYMBOLS = [
# Matchers
'_',
'A',
'AddressSatisfies',
'AllOf',
'An',
'AnyOf',
'ContainerEq',
'Contains',
'ContainsRegex',
'DoubleEq',
'ElementsAre',
'ElementsAreArray',
'EndsWith',
'Eq',
'Field',
'FloatEq',
'Ge',
'Gt',
'HasSubstr',
'IsInitializedProto',
'Le',
'Lt',
'MatcherCast',
'Matches',
'MatchesRegex',
'NanSensitiveDoubleEq',
'NanSensitiveFloatEq',
'Ne',
'Not',
'NotNull',
'Pointee',
'Property',
'Ref',
'ResultOf',
'SafeMatcherCast',
'StartsWith',
'StrCaseEq',
'StrCaseNe',
'StrEq',
'StrNe',
'Truly',
'TypedEq',
'Value',
# Actions
'Assign',
'ByRef',
'DeleteArg',
'DoAll',
'DoDefault',
'IgnoreResult',
'Invoke',
'InvokeArgument',
'InvokeWithoutArgs',
'Return',
'ReturnNew',
'ReturnNull',
'ReturnRef',
'SaveArg',
'SetArgReferee',
'SetArgPointee',
'SetArgumentPointee',
'SetArrayArgument',
'SetErrnoAndReturn',
'Throw',
'WithArg',
'WithArgs',
'WithoutArgs',
# Cardinalities
'AnyNumber',
'AtLeast',
'AtMost',
'Between',
'Exactly',
# Sequences
'InSequence',
'Sequence',
# Misc
'DefaultValue',
'Mock',
]
# Regex for matching source file path and line number in the compiler's errors.
_GCC_FILE_LINE_RE = r'(?P<file>.*):(?P<line>\d+):(\d+:)?\s+'
_CLANG_FILE_LINE_RE = r'(?P<file>.*):(?P<line>\d+):(?P<column>\d+):\s+'
_CLANG_NON_GMOCK_FILE_LINE_RE = (
r'(?P<file>.*[/\\^](?!gmock-)[^/\\]+):(?P<line>\d+):(?P<column>\d+):\s+')
def _FindAllMatches(regex, s):
"""Generates all matches of regex in string s."""
r = re.compile(regex)
return r.finditer(s)
def _GenericDiagnoser(short_name, long_name, diagnoses, msg):
"""Diagnoses the given disease by pattern matching.
Can provide different diagnoses for different patterns.
Args:
short_name: Short name of the disease.
long_name: Long name of the disease.
diagnoses: A list of pairs (regex, pattern for formatting the diagnosis
for matching regex).
msg: Compiler's error messages.
Yields:
Tuples of the form
(short name of disease, long name of disease, diagnosis).
"""
for regex, diagnosis in diagnoses:
if re.search(regex, msg):
diagnosis = '%(file)s:%(line)s:' + diagnosis
for m in _FindAllMatches(regex, msg):
yield (short_name, long_name, diagnosis % m.groupdict())
def _NeedToReturnReferenceDiagnoser(msg):
"""Diagnoses the NRR disease, given the error messages by the compiler."""
gcc_regex = (r'In member function \'testing::internal::ReturnAction<R>.*\n'
+ _GCC_FILE_LINE_RE + r'instantiated from here\n'
r'.*gmock-actions\.h.*error: creating array with negative size')
clang_regex = (r'error:.*array.*negative.*\r?\n'
r'(.*\n)*?' +
_CLANG_NON_GMOCK_FILE_LINE_RE +
r'note: in instantiation of function template specialization '
r'\'testing::internal::ReturnAction<(?P<type>.*)>'
r'::operator Action<.*>\' requested here')
clang11_re = (r'use_ReturnRef_instead_of_Return_to_return_a_reference.*'
r'(.*\n)*?' + _CLANG_NON_GMOCK_FILE_LINE_RE)
diagnosis = """
You are using a Return() action in a function that returns a reference to
%(type)s. Please use ReturnRef() instead."""
return _GenericDiagnoser('NRR', 'Need to Return Reference',
[(clang_regex, diagnosis),
(clang11_re, diagnosis % {'type': 'a type'}),
(gcc_regex, diagnosis % {'type': 'a type'})],
msg)
def _NeedToReturnSomethingDiagnoser(msg):
"""Diagnoses the NRS disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE + r'(instantiated from here\n.'
r'*gmock.*actions\.h.*error: void value not ignored)'
r'|(error: control reaches end of non-void function)')
clang_regex1 = (_CLANG_FILE_LINE_RE +
r'error: cannot initialize return object '
r'of type \'Result\' \(aka \'(?P<return_type>.*)\'\) '
r'with an rvalue of type \'void\'')
clang_regex2 = (_CLANG_FILE_LINE_RE +
r'error: cannot initialize return object '
r'of type \'(?P<return_type>.*)\' '
r'with an rvalue of type \'void\'')
diagnosis = """
You are using an action that returns void, but it needs to return
%(return_type)s. Please tell it *what* to return. Perhaps you can use
the pattern DoAll(some_action, Return(some_value))?"""
return _GenericDiagnoser(
'NRS',
'Need to Return Something',
[(gcc_regex, diagnosis % {'return_type': '*something*'}),
(clang_regex1, diagnosis),
(clang_regex2, diagnosis)],
msg)
def _NeedToReturnNothingDiagnoser(msg):
"""Diagnoses the NRN disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE + r'instantiated from here\n'
r'.*gmock-actions\.h.*error: instantiation of '
r'\'testing::internal::ReturnAction<R>::Impl<F>::value_\' '
r'as type \'void\'')
clang_regex1 = (r'error: field has incomplete type '
r'\'Result\' \(aka \'void\'\)(\r)?\n'
r'(.*\n)*?' +
_CLANG_NON_GMOCK_FILE_LINE_RE + r'note: in instantiation '
r'of function template specialization '
r'\'testing::internal::ReturnAction<(?P<return_type>.*)>'
r'::operator Action<void \(.*\)>\' requested here')
clang_regex2 = (r'error: field has incomplete type '
r'\'Result\' \(aka \'void\'\)(\r)?\n'
r'(.*\n)*?' +
_CLANG_NON_GMOCK_FILE_LINE_RE + r'note: in instantiation '
r'of function template specialization '
r'\'testing::internal::DoBothAction<.*>'
r'::operator Action<(?P<return_type>.*) \(.*\)>\' '
r'requested here')
diagnosis = """
You are using an action that returns %(return_type)s, but it needs to return
void. Please use a void-returning action instead.
All actions but the last in DoAll(...) must return void. Perhaps you need
to re-arrange the order of actions in a DoAll(), if you are using one?"""
return _GenericDiagnoser(
'NRN',
'Need to Return Nothing',
[(gcc_regex, diagnosis % {'return_type': '*something*'}),
(clang_regex1, diagnosis),
(clang_regex2, diagnosis)],
msg)
def _IncompleteByReferenceArgumentDiagnoser(msg):
"""Diagnoses the IBRA disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE + r'instantiated from here\n'
r'.*gtest-printers\.h.*error: invalid application of '
r'\'sizeof\' to incomplete type \'(?P<type>.*)\'')
clang_regex = (r'.*gtest-printers\.h.*error: invalid application of '
r'\'sizeof\' to an incomplete type '
r'\'(?P<type>.*)( const)?\'\r?\n'
r'(.*\n)*?' +
_CLANG_NON_GMOCK_FILE_LINE_RE +
r'note: in instantiation of member function '
r'\'testing::internal2::TypeWithoutFormatter<.*>::'
r'PrintValue\' requested here')
diagnosis = """
In order to mock this function, Google Mock needs to see the definition
of type "%(type)s" - declaration alone is not enough. Either #include
the header that defines it, or change the argument to be passed
by pointer."""
return _GenericDiagnoser('IBRA', 'Incomplete By-Reference Argument Type',
[(gcc_regex, diagnosis),
(clang_regex, diagnosis)],
msg)
def _OverloadedFunctionMatcherDiagnoser(msg):
"""Diagnoses the OFM disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE + r'error: no matching function for '
r'call to \'Truly\(<unresolved overloaded function type>\)')
clang_regex = (_CLANG_FILE_LINE_RE + r'error: no matching function for '
r'call to \'Truly')
diagnosis = """
The argument you gave to Truly() is an overloaded function. Please tell
your compiler which overloaded version you want to use.
For example, if you want to use the version whose signature is
bool Foo(int n);
you should write
Truly(static_cast<bool (*)(int n)>(Foo))"""
return _GenericDiagnoser('OFM', 'Overloaded Function Matcher',
[(gcc_regex, diagnosis),
(clang_regex, diagnosis)],
msg)
def _OverloadedFunctionActionDiagnoser(msg):
"""Diagnoses the OFA disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE + r'error: no matching function for call to '
r'\'Invoke\(<unresolved overloaded function type>')
clang_regex = (_CLANG_FILE_LINE_RE + r'error: no matching '
r'function for call to \'Invoke\'\r?\n'
r'(.*\n)*?'
r'.*\bgmock-generated-actions\.h:\d+:\d+:\s+'
r'note: candidate template ignored:\s+'
r'couldn\'t infer template argument \'FunctionImpl\'')
diagnosis = """
Function you are passing to Invoke is overloaded. Please tell your compiler
which overloaded version you want to use.
For example, if you want to use the version whose signature is
bool MyFunction(int n, double x);
you should write something like
Invoke(static_cast<bool (*)(int n, double x)>(MyFunction))"""
return _GenericDiagnoser('OFA', 'Overloaded Function Action',
[(gcc_regex, diagnosis),
(clang_regex, diagnosis)],
msg)
def _OverloadedMethodActionDiagnoser(msg):
"""Diagnoses the OMA disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE + r'error: no matching function for '
r'call to \'Invoke\(.+, <unresolved overloaded function '
r'type>\)')
clang_regex = (_CLANG_FILE_LINE_RE + r'error: no matching function '
r'for call to \'Invoke\'\r?\n'
r'(.*\n)*?'
r'.*\bgmock-generated-actions\.h:\d+:\d+: '
r'note: candidate function template not viable: '
r'requires .*, but 2 (arguments )?were provided')
diagnosis = """
The second argument you gave to Invoke() is an overloaded method. Please
tell your compiler which overloaded version you want to use.
For example, if you want to use the version whose signature is
class Foo {
...
bool Bar(int n, double x);
};
you should write something like
Invoke(foo, static_cast<bool (Foo::*)(int n, double x)>(&Foo::Bar))"""
return _GenericDiagnoser('OMA', 'Overloaded Method Action',
[(gcc_regex, diagnosis),
(clang_regex, diagnosis)],
msg)
def _MockObjectPointerDiagnoser(msg):
"""Diagnoses the MOP disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE + r'error: request for member '
r'\'gmock_(?P<method>.+)\' in \'(?P<mock_object>.+)\', '
r'which is of non-class type \'(.*::)*(?P<class_name>.+)\*\'')
clang_regex = (_CLANG_FILE_LINE_RE + r'error: member reference type '
r'\'(?P<class_name>.*?) *\' is a pointer; '
r'(did you mean|maybe you meant) to use \'->\'\?')
diagnosis = """
The first argument to ON_CALL() and EXPECT_CALL() must be a mock *object*,
not a *pointer* to it. Please write '*(%(mock_object)s)' instead of
'%(mock_object)s' as your first argument.
For example, given the mock class:
class %(class_name)s : public ... {
...
MOCK_METHOD0(%(method)s, ...);
};
and the following mock instance:
%(class_name)s* mock_ptr = ...
you should use the EXPECT_CALL like this:
EXPECT_CALL(*mock_ptr, %(method)s(...));"""
return _GenericDiagnoser(
'MOP',
'Mock Object Pointer',
[(gcc_regex, diagnosis),
(clang_regex, diagnosis % {'mock_object': 'mock_object',
'method': 'method',
'class_name': '%(class_name)s'})],
msg)
def _NeedToUseSymbolDiagnoser(msg):
"""Diagnoses the NUS disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE + r'error: \'(?P<symbol>.+)\' '
r'(was not declared in this scope|has not been declared)')
clang_regex = (_CLANG_FILE_LINE_RE +
r'error: (use of undeclared identifier|unknown type name|'
r'no template named) \'(?P<symbol>[^\']+)\'')
diagnosis = """
'%(symbol)s' is defined by Google Mock in the testing namespace.
Did you forget to write
using testing::%(symbol)s;
?"""
for m in (list(_FindAllMatches(gcc_regex, msg)) +
list(_FindAllMatches(clang_regex, msg))):
symbol = m.groupdict()['symbol']
if symbol in _COMMON_GMOCK_SYMBOLS:
yield ('NUS', 'Need to Use Symbol', diagnosis % m.groupdict())
def _NeedToUseReturnNullDiagnoser(msg):
"""Diagnoses the NRNULL disease, given the error messages by the compiler."""
gcc_regex = ('instantiated from \'testing::internal::ReturnAction<R>'
'::operator testing::Action<Func>\(\) const.*\n' +
_GCC_FILE_LINE_RE + r'instantiated from here\n'
r'.*error: no matching function for call to \'ImplicitCast_\('
r'(:?long )?int&\)')
clang_regex = (r'\bgmock-actions.h:.* error: no matching function for '
r'call to \'ImplicitCast_\'\r?\n'
r'(.*\n)*?' +
_CLANG_NON_GMOCK_FILE_LINE_RE + r'note: in instantiation '
r'of function template specialization '
r'\'testing::internal::ReturnAction<(int|long)>::operator '
r'Action<(?P<type>.*)\(\)>\' requested here')
diagnosis = """
You are probably calling Return(NULL) and the compiler isn't sure how to turn
NULL into %(type)s. Use ReturnNull() instead.
Note: the line number may be off; please fix all instances of Return(NULL)."""
return _GenericDiagnoser(
'NRNULL', 'Need to use ReturnNull',
[(clang_regex, diagnosis),
(gcc_regex, diagnosis % {'type': 'the right type'})],
msg)
def _TypeInTemplatedBaseDiagnoser(msg):
"""Diagnoses the TTB disease, given the error messages by the compiler."""
# This version works when the type is used as the mock function's return
# type.
gcc_4_3_1_regex_type_in_retval = (
r'In member function \'int .*\n' + _GCC_FILE_LINE_RE +
r'error: a function call cannot appear in a constant-expression')
gcc_4_4_0_regex_type_in_retval = (
r'error: a function call cannot appear in a constant-expression'
+ _GCC_FILE_LINE_RE + r'error: template argument 1 is invalid\n')
# This version works when the type is used as the mock function's sole
# parameter type.
gcc_regex_type_of_sole_param = (
_GCC_FILE_LINE_RE +
r'error: \'(?P<type>.+)\' was not declared in this scope\n'
r'.*error: template argument 1 is invalid\n')
# This version works when the type is used as a parameter of a mock
# function that has multiple parameters.
gcc_regex_type_of_a_param = (
r'error: expected `;\' before \'::\' token\n'
+ _GCC_FILE_LINE_RE +
r'error: \'(?P<type>.+)\' was not declared in this scope\n'
r'.*error: template argument 1 is invalid\n'
r'.*error: \'.+\' was not declared in this scope')
clang_regex_type_of_retval_or_sole_param = (
_CLANG_FILE_LINE_RE +
r'error: use of undeclared identifier \'(?P<type>.*)\'\n'
r'(.*\n)*?'
r'(?P=file):(?P=line):\d+: error: '
r'non-friend class member \'Result\' cannot have a qualified name'
)
clang_regex_type_of_a_param = (
_CLANG_FILE_LINE_RE +
r'error: C\+\+ requires a type specifier for all declarations\n'
r'(.*\n)*?'
r'(?P=file):(?P=line):(?P=column): error: '
r'C\+\+ requires a type specifier for all declarations'
)
clang_regex_unknown_type = (
_CLANG_FILE_LINE_RE +
r'error: unknown type name \'(?P<type>[^\']+)\''
)
diagnosis = """
In a mock class template, types or typedefs defined in the base class
template are *not* automatically visible. This is how C++ works. Before
you can use a type or typedef named %(type)s defined in base class Base<T>, you
need to make it visible. One way to do it is:
typedef typename Base<T>::%(type)s %(type)s;"""
for diag in _GenericDiagnoser(
'TTB', 'Type in Template Base',
[(gcc_4_3_1_regex_type_in_retval, diagnosis % {'type': 'Foo'}),
(gcc_4_4_0_regex_type_in_retval, diagnosis % {'type': 'Foo'}),
(gcc_regex_type_of_sole_param, diagnosis),
(gcc_regex_type_of_a_param, diagnosis),
(clang_regex_type_of_retval_or_sole_param, diagnosis),
(clang_regex_type_of_a_param, diagnosis % {'type': 'Foo'})],
msg):
yield diag
# Avoid overlap with the NUS pattern.
for m in _FindAllMatches(clang_regex_unknown_type, msg):
type_ = m.groupdict()['type']
if type_ not in _COMMON_GMOCK_SYMBOLS:
yield ('TTB', 'Type in Template Base', diagnosis % m.groupdict())
def _WrongMockMethodMacroDiagnoser(msg):
"""Diagnoses the WMM disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE +
r'.*this_method_does_not_take_(?P<wrong_args>\d+)_argument.*\n'
r'.*\n'
r'.*candidates are.*FunctionMocker<[^>]+A(?P<args>\d+)\)>')
clang_regex = (_CLANG_NON_GMOCK_FILE_LINE_RE +
r'error:.*array.*negative.*r?\n'
r'(.*\n)*?'
r'(?P=file):(?P=line):(?P=column): error: too few arguments '
r'to function call, expected (?P<args>\d+), '
r'have (?P<wrong_args>\d+)')
clang11_re = (_CLANG_NON_GMOCK_FILE_LINE_RE +
r'.*this_method_does_not_take_'
r'(?P<wrong_args>\d+)_argument.*')
diagnosis = """
You are using MOCK_METHOD%(wrong_args)s to define a mock method that has
%(args)s arguments. Use MOCK_METHOD%(args)s (or MOCK_CONST_METHOD%(args)s,
MOCK_METHOD%(args)s_T, MOCK_CONST_METHOD%(args)s_T as appropriate) instead."""
return _GenericDiagnoser('WMM', 'Wrong MOCK_METHODn Macro',
[(gcc_regex, diagnosis),
(clang11_re, diagnosis % {'wrong_args': 'm',
'args': 'n'}),
(clang_regex, diagnosis)],
msg)
def _WrongParenPositionDiagnoser(msg):
"""Diagnoses the WPP disease, given the error messages by the compiler."""
gcc_regex = (_GCC_FILE_LINE_RE +
r'error:.*testing::internal::MockSpec<.* has no member named \''
r'(?P<method>\w+)\'')
clang_regex = (_CLANG_NON_GMOCK_FILE_LINE_RE +
r'error: no member named \'(?P<method>\w+)\' in '
r'\'testing::internal::MockSpec<.*>\'')
diagnosis = """
The closing parenthesis of ON_CALL or EXPECT_CALL should be *before*
".%(method)s". For example, you should write:
EXPECT_CALL(my_mock, Foo(_)).%(method)s(...);
instead of:
EXPECT_CALL(my_mock, Foo(_).%(method)s(...));"""
return _GenericDiagnoser('WPP', 'Wrong Parenthesis Position',
[(gcc_regex, diagnosis),
(clang_regex, diagnosis)],
msg)
_DIAGNOSERS = [
_IncompleteByReferenceArgumentDiagnoser,
_MockObjectPointerDiagnoser,
_NeedToReturnNothingDiagnoser,
_NeedToReturnReferenceDiagnoser,
_NeedToReturnSomethingDiagnoser,
_NeedToUseReturnNullDiagnoser,
_NeedToUseSymbolDiagnoser,
_OverloadedFunctionActionDiagnoser,
_OverloadedFunctionMatcherDiagnoser,
_OverloadedMethodActionDiagnoser,
_TypeInTemplatedBaseDiagnoser,
_WrongMockMethodMacroDiagnoser,
_WrongParenPositionDiagnoser,
]
def Diagnose(msg):
"""Generates all possible diagnoses given the compiler error message."""
msg = re.sub(r'\x1b\[[^m]*m', '', msg) # Strips all color formatting.
# Assuming the string is using the UTF-8 encoding, replaces the left and
# the right single quote characters with apostrophes.
msg = re.sub(r'(\xe2\x80\x98|\xe2\x80\x99)', "'", msg)
diagnoses = []
for diagnoser in _DIAGNOSERS:
for diag in diagnoser(msg):
diagnosis = '[%s - %s]\n%s' % diag
if not diagnosis in diagnoses:
diagnoses.append(diagnosis)
return diagnoses
def main():
print ('Google Mock Doctor v%s - '
'diagnoses problems in code using Google Mock.' % _VERSION)
if sys.stdin.isatty():
print ('Please copy and paste the compiler errors here. Press c-D when '
'you are done:')
else:
print ('Waiting for compiler errors on stdin . . .')
msg = sys.stdin.read().strip()
diagnoses = Diagnose(msg)
count = len(diagnoses)
if not count:
print ("""
Your compiler complained:
8<------------------------------------------------------------
%s
------------------------------------------------------------>8
Uh-oh, I'm not smart enough to figure out what the problem is. :-(
However...
If you send your source code and the compiler's error messages to
%s, you can be helped and I can get smarter --
win-win for us!""" % (msg, _EMAIL))
else:
print ('------------------------------------------------------------')
print ('Your code appears to have the following',)
if count > 1:
print ('%s diseases:' % (count,))
else:
print ('disease:')
i = 0
for d in diagnoses:
i += 1
if count > 1:
print ('\n#%s:' % (i,))
print (d)
print ("""
How did I do? If you think I'm wrong or unhelpful, please send your
source code and the compiler's error messages to %s.
Then you can be helped and I can get smarter -- I promise I won't be upset!""" %
_EMAIL)
if __name__ == '__main__':
main()

File diff suppressed because it is too large Load Diff

@ -0,0 +1,78 @@
#!/usr/bin/env python
#
# Copyright 2009, Google Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
"""upload_gmock.py v0.1.0 -- uploads a Google Mock patch for review.
This simple wrapper passes all command line flags and
--cc=googlemock@googlegroups.com to upload.py.
USAGE: upload_gmock.py [options for upload.py]
"""
__author__ = 'wan@google.com (Zhanyong Wan)'
import os
import sys
CC_FLAG = '--cc='
GMOCK_GROUP = 'googlemock@googlegroups.com'
def main():
# Finds the path to upload.py, assuming it is in the same directory
# as this file.
my_dir = os.path.dirname(os.path.abspath(__file__))
upload_py_path = os.path.join(my_dir, 'upload.py')
# Adds Google Mock discussion group to the cc line if it's not there
# already.
upload_py_argv = [upload_py_path]
found_cc_flag = False
for arg in sys.argv[1:]:
if arg.startswith(CC_FLAG):
found_cc_flag = True
cc_line = arg[len(CC_FLAG):]
cc_list = [addr for addr in cc_line.split(',') if addr]
if GMOCK_GROUP not in cc_list:
cc_list.append(GMOCK_GROUP)
upload_py_argv.append(CC_FLAG + ','.join(cc_list))
else:
upload_py_argv.append(arg)
if not found_cc_flag:
upload_py_argv.append(CC_FLAG + GMOCK_GROUP)
# Invokes upload.py with the modified command line flags.
os.execv(upload_py_path, upload_py_argv)
if __name__ == '__main__':
main()

@ -0,0 +1,46 @@
// Copyright 2008, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Google C++ Mocking Framework (Google Mock)
//
// This file #includes all Google Mock implementation .cc files. The
// purpose is to allow a user to build Google Mock by compiling this
// file alone.
// This line ensures that gmock.h can be compiled on its own, even
// when it's fused.
#include "gmock/gmock.h"
// The following lines pull in the real gmock *.cc files.
#include "src/gmock-cardinalities.cc"
#include "src/gmock-internal-utils.cc"
#include "src/gmock-matchers.cc"
#include "src/gmock-spec-builders.cc"
#include "src/gmock.cc"

@ -0,0 +1,155 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements cardinalities.
#include "gmock/gmock-cardinalities.h"
#include <limits.h>
#include <ostream> // NOLINT
#include <sstream>
#include <string>
#include "gmock/internal/gmock-internal-utils.h"
#include "gtest/gtest.h"
namespace testing {
namespace {
// Implements the Between(m, n) cardinality.
class BetweenCardinalityImpl : public CardinalityInterface {
public:
BetweenCardinalityImpl(int min, int max)
: min_(min >= 0 ? min : 0),
max_(max >= min_ ? max : min_) {
std::stringstream ss;
if (min < 0) {
ss << "The invocation lower bound must be >= 0, "
<< "but is actually " << min << ".";
internal::Expect(false, __FILE__, __LINE__, ss.str());
} else if (max < 0) {
ss << "The invocation upper bound must be >= 0, "
<< "but is actually " << max << ".";
internal::Expect(false, __FILE__, __LINE__, ss.str());
} else if (min > max) {
ss << "The invocation upper bound (" << max
<< ") must be >= the invocation lower bound (" << min
<< ").";
internal::Expect(false, __FILE__, __LINE__, ss.str());
}
}
// Conservative estimate on the lower/upper bound of the number of
// calls allowed.
int ConservativeLowerBound() const override { return min_; }
int ConservativeUpperBound() const override { return max_; }
bool IsSatisfiedByCallCount(int call_count) const override {
return min_ <= call_count && call_count <= max_;
}
bool IsSaturatedByCallCount(int call_count) const override {
return call_count >= max_;
}
void DescribeTo(::std::ostream* os) const override;
private:
const int min_;
const int max_;
GTEST_DISALLOW_COPY_AND_ASSIGN_(BetweenCardinalityImpl);
};
// Formats "n times" in a human-friendly way.
inline std::string FormatTimes(int n) {
if (n == 1) {
return "once";
} else if (n == 2) {
return "twice";
} else {
std::stringstream ss;
ss << n << " times";
return ss.str();
}
}
// Describes the Between(m, n) cardinality in human-friendly text.
void BetweenCardinalityImpl::DescribeTo(::std::ostream* os) const {
if (min_ == 0) {
if (max_ == 0) {
*os << "never called";
} else if (max_ == INT_MAX) {
*os << "called any number of times";
} else {
*os << "called at most " << FormatTimes(max_);
}
} else if (min_ == max_) {
*os << "called " << FormatTimes(min_);
} else if (max_ == INT_MAX) {
*os << "called at least " << FormatTimes(min_);
} else {
// 0 < min_ < max_ < INT_MAX
*os << "called between " << min_ << " and " << max_ << " times";
}
}
} // Unnamed namespace
// Describes the given call count to an ostream.
void Cardinality::DescribeActualCallCountTo(int actual_call_count,
::std::ostream* os) {
if (actual_call_count > 0) {
*os << "called " << FormatTimes(actual_call_count);
} else {
*os << "never called";
}
}
// Creates a cardinality that allows at least n calls.
GTEST_API_ Cardinality AtLeast(int n) { return Between(n, INT_MAX); }
// Creates a cardinality that allows at most n calls.
GTEST_API_ Cardinality AtMost(int n) { return Between(0, n); }
// Creates a cardinality that allows any number of calls.
GTEST_API_ Cardinality AnyNumber() { return AtLeast(0); }
// Creates a cardinality that allows between min and max calls.
GTEST_API_ Cardinality Between(int min, int max) {
return Cardinality(new BetweenCardinalityImpl(min, max));
}
// Creates a cardinality that allows exactly n calls.
GTEST_API_ Cardinality Exactly(int n) { return Between(n, n); }
} // namespace testing

@ -0,0 +1,200 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file defines some utilities useful for implementing Google
// Mock. They are subject to change without notice, so please DO NOT
// USE THEM IN USER CODE.
#include "gmock/internal/gmock-internal-utils.h"
#include <ctype.h>
#include <ostream> // NOLINT
#include <string>
#include "gmock/gmock.h"
#include "gmock/internal/gmock-port.h"
#include "gtest/gtest.h"
namespace testing {
namespace internal {
// Joins a vector of strings as if they are fields of a tuple; returns
// the joined string.
GTEST_API_ std::string JoinAsTuple(const Strings& fields) {
switch (fields.size()) {
case 0:
return "";
case 1:
return fields[0];
default:
std::string result = "(" + fields[0];
for (size_t i = 1; i < fields.size(); i++) {
result += ", ";
result += fields[i];
}
result += ")";
return result;
}
}
// Converts an identifier name to a space-separated list of lower-case
// words. Each maximum substring of the form [A-Za-z][a-z]*|\d+ is
// treated as one word. For example, both "FooBar123" and
// "foo_bar_123" are converted to "foo bar 123".
GTEST_API_ std::string ConvertIdentifierNameToWords(const char* id_name) {
std::string result;
char prev_char = '\0';
for (const char* p = id_name; *p != '\0'; prev_char = *(p++)) {
// We don't care about the current locale as the input is
// guaranteed to be a valid C++ identifier name.
const bool starts_new_word = IsUpper(*p) ||
(!IsAlpha(prev_char) && IsLower(*p)) ||
(!IsDigit(prev_char) && IsDigit(*p));
if (IsAlNum(*p)) {
if (starts_new_word && result != "")
result += ' ';
result += ToLower(*p);
}
}
return result;
}
// This class reports Google Mock failures as Google Test failures. A
// user can define another class in a similar fashion if they intend to
// use Google Mock with a testing framework other than Google Test.
class GoogleTestFailureReporter : public FailureReporterInterface {
public:
void ReportFailure(FailureType type, const char* file, int line,
const std::string& message) override {
AssertHelper(type == kFatal ?
TestPartResult::kFatalFailure :
TestPartResult::kNonFatalFailure,
file,
line,
message.c_str()) = Message();
if (type == kFatal) {
posix::Abort();
}
}
};
// Returns the global failure reporter. Will create a
// GoogleTestFailureReporter and return it the first time called.
GTEST_API_ FailureReporterInterface* GetFailureReporter() {
// Points to the global failure reporter used by Google Mock. gcc
// guarantees that the following use of failure_reporter is
// thread-safe. We may need to add additional synchronization to
// protect failure_reporter if we port Google Mock to other
// compilers.
static FailureReporterInterface* const failure_reporter =
new GoogleTestFailureReporter();
return failure_reporter;
}
// Protects global resources (stdout in particular) used by Log().
static GTEST_DEFINE_STATIC_MUTEX_(g_log_mutex);
// Returns true if and only if a log with the given severity is visible
// according to the --gmock_verbose flag.
GTEST_API_ bool LogIsVisible(LogSeverity severity) {
if (GMOCK_FLAG(verbose) == kInfoVerbosity) {
// Always show the log if --gmock_verbose=info.
return true;
} else if (GMOCK_FLAG(verbose) == kErrorVerbosity) {
// Always hide it if --gmock_verbose=error.
return false;
} else {
// If --gmock_verbose is neither "info" nor "error", we treat it
// as "warning" (its default value).
return severity == kWarning;
}
}
// Prints the given message to stdout if and only if 'severity' >= the level
// specified by the --gmock_verbose flag. If stack_frames_to_skip >=
// 0, also prints the stack trace excluding the top
// stack_frames_to_skip frames. In opt mode, any positive
// stack_frames_to_skip is treated as 0, since we don't know which
// function calls will be inlined by the compiler and need to be
// conservative.
GTEST_API_ void Log(LogSeverity severity, const std::string& message,
int stack_frames_to_skip) {
if (!LogIsVisible(severity))
return;
// Ensures that logs from different threads don't interleave.
MutexLock l(&g_log_mutex);
if (severity == kWarning) {
// Prints a GMOCK WARNING marker to make the warnings easily searchable.
std::cout << "\nGMOCK WARNING:";
}
// Pre-pends a new-line to message if it doesn't start with one.
if (message.empty() || message[0] != '\n') {
std::cout << "\n";
}
std::cout << message;
if (stack_frames_to_skip >= 0) {
#ifdef NDEBUG
// In opt mode, we have to be conservative and skip no stack frame.
const int actual_to_skip = 0;
#else
// In dbg mode, we can do what the caller tell us to do (plus one
// for skipping this function's stack frame).
const int actual_to_skip = stack_frames_to_skip + 1;
#endif // NDEBUG
// Appends a new-line to message if it doesn't end with one.
if (!message.empty() && *message.rbegin() != '\n') {
std::cout << "\n";
}
std::cout << "Stack trace:\n"
<< ::testing::internal::GetCurrentOsStackTraceExceptTop(
::testing::UnitTest::GetInstance(), actual_to_skip);
}
std::cout << ::std::flush;
}
GTEST_API_ WithoutMatchers GetWithoutMatchers() { return WithoutMatchers(); }
GTEST_API_ void IllegalDoDefault(const char* file, int line) {
internal::Assert(
false, file, line,
"You are using DoDefault() inside a composite action like "
"DoAll() or WithArgs(). This is not supported for technical "
"reasons. Please instead spell out the default action, or "
"assign the default action to an Action variable and use "
"the variable in various places.");
}
} // namespace internal
} // namespace testing

@ -0,0 +1,462 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements Matcher<const string&>, Matcher<string>, and
// utilities for defining matchers.
#include "gmock/gmock-matchers.h"
#include "gmock/gmock-generated-matchers.h"
#include <string.h>
#include <iostream>
#include <sstream>
#include <string>
namespace testing {
namespace internal {
// Returns the description for a matcher defined using the MATCHER*()
// macro where the user-supplied description string is "", if
// 'negation' is false; otherwise returns the description of the
// negation of the matcher. 'param_values' contains a list of strings
// that are the print-out of the matcher's parameters.
GTEST_API_ std::string FormatMatcherDescription(bool negation,
const char* matcher_name,
const Strings& param_values) {
std::string result = ConvertIdentifierNameToWords(matcher_name);
if (param_values.size() >= 1) result += " " + JoinAsTuple(param_values);
return negation ? "not (" + result + ")" : result;
}
// FindMaxBipartiteMatching and its helper class.
//
// Uses the well-known Ford-Fulkerson max flow method to find a maximum
// bipartite matching. Flow is considered to be from left to right.
// There is an implicit source node that is connected to all of the left
// nodes, and an implicit sink node that is connected to all of the
// right nodes. All edges have unit capacity.
//
// Neither the flow graph nor the residual flow graph are represented
// explicitly. Instead, they are implied by the information in 'graph' and
// a vector<int> called 'left_' whose elements are initialized to the
// value kUnused. This represents the initial state of the algorithm,
// where the flow graph is empty, and the residual flow graph has the
// following edges:
// - An edge from source to each left_ node
// - An edge from each right_ node to sink
// - An edge from each left_ node to each right_ node, if the
// corresponding edge exists in 'graph'.
//
// When the TryAugment() method adds a flow, it sets left_[l] = r for some
// nodes l and r. This induces the following changes:
// - The edges (source, l), (l, r), and (r, sink) are added to the
// flow graph.
// - The same three edges are removed from the residual flow graph.
// - The reverse edges (l, source), (r, l), and (sink, r) are added
// to the residual flow graph, which is a directional graph
// representing unused flow capacity.
//
// When the method augments a flow (moving left_[l] from some r1 to some
// other r2), this can be thought of as "undoing" the above steps with
// respect to r1 and "redoing" them with respect to r2.
//
// It bears repeating that the flow graph and residual flow graph are
// never represented explicitly, but can be derived by looking at the
// information in 'graph' and in left_.
//
// As an optimization, there is a second vector<int> called right_ which
// does not provide any new information. Instead, it enables more
// efficient queries about edges entering or leaving the right-side nodes
// of the flow or residual flow graphs. The following invariants are
// maintained:
//
// left[l] == kUnused or right[left[l]] == l
// right[r] == kUnused or left[right[r]] == r
//
// . [ source ] .
// . ||| .
// . ||| .
// . ||\--> left[0]=1 ---\ right[0]=-1 ----\ .
// . || | | .
// . |\---> left[1]=-1 \--> right[1]=0 ---\| .
// . | || .
// . \----> left[2]=2 ------> right[2]=2 --\|| .
// . ||| .
// . elements matchers vvv .
// . [ sink ] .
//
// See Also:
// [1] Cormen, et al (2001). "Section 26.2: The Ford-Fulkerson method".
// "Introduction to Algorithms (Second ed.)", pp. 651-664.
// [2] "Ford-Fulkerson algorithm", Wikipedia,
// 'http://en.wikipedia.org/wiki/Ford%E2%80%93Fulkerson_algorithm'
class MaxBipartiteMatchState {
public:
explicit MaxBipartiteMatchState(const MatchMatrix& graph)
: graph_(&graph),
left_(graph_->LhsSize(), kUnused),
right_(graph_->RhsSize(), kUnused) {}
// Returns the edges of a maximal match, each in the form {left, right}.
ElementMatcherPairs Compute() {
// 'seen' is used for path finding { 0: unseen, 1: seen }.
::std::vector<char> seen;
// Searches the residual flow graph for a path from each left node to
// the sink in the residual flow graph, and if one is found, add flow
// to the graph. It's okay to search through the left nodes once. The
// edge from the implicit source node to each previously-visited left
// node will have flow if that left node has any path to the sink
// whatsoever. Subsequent augmentations can only add flow to the
// network, and cannot take away that previous flow unit from the source.
// Since the source-to-left edge can only carry one flow unit (or,
// each element can be matched to only one matcher), there is no need
// to visit the left nodes more than once looking for augmented paths.
// The flow is known to be possible or impossible by looking at the
// node once.
for (size_t ilhs = 0; ilhs < graph_->LhsSize(); ++ilhs) {
// Reset the path-marking vector and try to find a path from
// source to sink starting at the left_[ilhs] node.
GTEST_CHECK_(left_[ilhs] == kUnused)
<< "ilhs: " << ilhs << ", left_[ilhs]: " << left_[ilhs];
// 'seen' initialized to 'graph_->RhsSize()' copies of 0.
seen.assign(graph_->RhsSize(), 0);
TryAugment(ilhs, &seen);
}
ElementMatcherPairs result;
for (size_t ilhs = 0; ilhs < left_.size(); ++ilhs) {
size_t irhs = left_[ilhs];
if (irhs == kUnused) continue;
result.push_back(ElementMatcherPair(ilhs, irhs));
}
return result;
}
private:
static const size_t kUnused = static_cast<size_t>(-1);
// Perform a depth-first search from left node ilhs to the sink. If a
// path is found, flow is added to the network by linking the left and
// right vector elements corresponding each segment of the path.
// Returns true if a path to sink was found, which means that a unit of
// flow was added to the network. The 'seen' vector elements correspond
// to right nodes and are marked to eliminate cycles from the search.
//
// Left nodes will only be explored at most once because they
// are accessible from at most one right node in the residual flow
// graph.
//
// Note that left_[ilhs] is the only element of left_ that TryAugment will
// potentially transition from kUnused to another value. Any other
// left_ element holding kUnused before TryAugment will be holding it
// when TryAugment returns.
//
bool TryAugment(size_t ilhs, ::std::vector<char>* seen) {
for (size_t irhs = 0; irhs < graph_->RhsSize(); ++irhs) {
if ((*seen)[irhs]) continue;
if (!graph_->HasEdge(ilhs, irhs)) continue;
// There's an available edge from ilhs to irhs.
(*seen)[irhs] = 1;
// Next a search is performed to determine whether
// this edge is a dead end or leads to the sink.
//
// right_[irhs] == kUnused means that there is residual flow from
// right node irhs to the sink, so we can use that to finish this
// flow path and return success.
//
// Otherwise there is residual flow to some ilhs. We push flow
// along that path and call ourselves recursively to see if this
// ultimately leads to sink.
if (right_[irhs] == kUnused || TryAugment(right_[irhs], seen)) {
// Add flow from left_[ilhs] to right_[irhs].
left_[ilhs] = irhs;
right_[irhs] = ilhs;
return true;
}
}
return false;
}
const MatchMatrix* graph_; // not owned
// Each element of the left_ vector represents a left hand side node
// (i.e. an element) and each element of right_ is a right hand side
// node (i.e. a matcher). The values in the left_ vector indicate
// outflow from that node to a node on the right_ side. The values
// in the right_ indicate inflow, and specify which left_ node is
// feeding that right_ node, if any. For example, left_[3] == 1 means
// there's a flow from element #3 to matcher #1. Such a flow would also
// be redundantly represented in the right_ vector as right_[1] == 3.
// Elements of left_ and right_ are either kUnused or mutually
// referent. Mutually referent means that left_[right_[i]] = i and
// right_[left_[i]] = i.
::std::vector<size_t> left_;
::std::vector<size_t> right_;
GTEST_DISALLOW_ASSIGN_(MaxBipartiteMatchState);
};
const size_t MaxBipartiteMatchState::kUnused;
GTEST_API_ ElementMatcherPairs FindMaxBipartiteMatching(const MatchMatrix& g) {
return MaxBipartiteMatchState(g).Compute();
}
static void LogElementMatcherPairVec(const ElementMatcherPairs& pairs,
::std::ostream* stream) {
typedef ElementMatcherPairs::const_iterator Iter;
::std::ostream& os = *stream;
os << "{";
const char* sep = "";
for (Iter it = pairs.begin(); it != pairs.end(); ++it) {
os << sep << "\n ("
<< "element #" << it->first << ", "
<< "matcher #" << it->second << ")";
sep = ",";
}
os << "\n}";
}
bool MatchMatrix::NextGraph() {
for (size_t ilhs = 0; ilhs < LhsSize(); ++ilhs) {
for (size_t irhs = 0; irhs < RhsSize(); ++irhs) {
char& b = matched_[SpaceIndex(ilhs, irhs)];
if (!b) {
b = 1;
return true;
}
b = 0;
}
}
return false;
}
void MatchMatrix::Randomize() {
for (size_t ilhs = 0; ilhs < LhsSize(); ++ilhs) {
for (size_t irhs = 0; irhs < RhsSize(); ++irhs) {
char& b = matched_[SpaceIndex(ilhs, irhs)];
b = static_cast<char>(rand() & 1); // NOLINT
}
}
}
std::string MatchMatrix::DebugString() const {
::std::stringstream ss;
const char* sep = "";
for (size_t i = 0; i < LhsSize(); ++i) {
ss << sep;
for (size_t j = 0; j < RhsSize(); ++j) {
ss << HasEdge(i, j);
}
sep = ";";
}
return ss.str();
}
void UnorderedElementsAreMatcherImplBase::DescribeToImpl(
::std::ostream* os) const {
switch (match_flags()) {
case UnorderedMatcherRequire::ExactMatch:
if (matcher_describers_.empty()) {
*os << "is empty";
return;
}
if (matcher_describers_.size() == 1) {
*os << "has " << Elements(1) << " and that element ";
matcher_describers_[0]->DescribeTo(os);
return;
}
*os << "has " << Elements(matcher_describers_.size())
<< " and there exists some permutation of elements such that:\n";
break;
case UnorderedMatcherRequire::Superset:
*os << "a surjection from elements to requirements exists such that:\n";
break;
case UnorderedMatcherRequire::Subset:
*os << "an injection from elements to requirements exists such that:\n";
break;
}
const char* sep = "";
for (size_t i = 0; i != matcher_describers_.size(); ++i) {
*os << sep;
if (match_flags() == UnorderedMatcherRequire::ExactMatch) {
*os << " - element #" << i << " ";
} else {
*os << " - an element ";
}
matcher_describers_[i]->DescribeTo(os);
if (match_flags() == UnorderedMatcherRequire::ExactMatch) {
sep = ", and\n";
} else {
sep = "\n";
}
}
}
void UnorderedElementsAreMatcherImplBase::DescribeNegationToImpl(
::std::ostream* os) const {
switch (match_flags()) {
case UnorderedMatcherRequire::ExactMatch:
if (matcher_describers_.empty()) {
*os << "isn't empty";
return;
}
if (matcher_describers_.size() == 1) {
*os << "doesn't have " << Elements(1) << ", or has " << Elements(1)
<< " that ";
matcher_describers_[0]->DescribeNegationTo(os);
return;
}
*os << "doesn't have " << Elements(matcher_describers_.size())
<< ", or there exists no permutation of elements such that:\n";
break;
case UnorderedMatcherRequire::Superset:
*os << "no surjection from elements to requirements exists such that:\n";
break;
case UnorderedMatcherRequire::Subset:
*os << "no injection from elements to requirements exists such that:\n";
break;
}
const char* sep = "";
for (size_t i = 0; i != matcher_describers_.size(); ++i) {
*os << sep;
if (match_flags() == UnorderedMatcherRequire::ExactMatch) {
*os << " - element #" << i << " ";
} else {
*os << " - an element ";
}
matcher_describers_[i]->DescribeTo(os);
if (match_flags() == UnorderedMatcherRequire::ExactMatch) {
sep = ", and\n";
} else {
sep = "\n";
}
}
}
// Checks that all matchers match at least one element, and that all
// elements match at least one matcher. This enables faster matching
// and better error reporting.
// Returns false, writing an explanation to 'listener', if and only
// if the success criteria are not met.
bool UnorderedElementsAreMatcherImplBase::VerifyMatchMatrix(
const ::std::vector<std::string>& element_printouts,
const MatchMatrix& matrix, MatchResultListener* listener) const {
bool result = true;
::std::vector<char> element_matched(matrix.LhsSize(), 0);
::std::vector<char> matcher_matched(matrix.RhsSize(), 0);
for (size_t ilhs = 0; ilhs < matrix.LhsSize(); ilhs++) {
for (size_t irhs = 0; irhs < matrix.RhsSize(); irhs++) {
char matched = matrix.HasEdge(ilhs, irhs);
element_matched[ilhs] |= matched;
matcher_matched[irhs] |= matched;
}
}
if (match_flags() & UnorderedMatcherRequire::Superset) {
const char* sep =
"where the following matchers don't match any elements:\n";
for (size_t mi = 0; mi < matcher_matched.size(); ++mi) {
if (matcher_matched[mi]) continue;
result = false;
if (listener->IsInterested()) {
*listener << sep << "matcher #" << mi << ": ";
matcher_describers_[mi]->DescribeTo(listener->stream());
sep = ",\n";
}
}
}
if (match_flags() & UnorderedMatcherRequire::Subset) {
const char* sep =
"where the following elements don't match any matchers:\n";
const char* outer_sep = "";
if (!result) {
outer_sep = "\nand ";
}
for (size_t ei = 0; ei < element_matched.size(); ++ei) {
if (element_matched[ei]) continue;
result = false;
if (listener->IsInterested()) {
*listener << outer_sep << sep << "element #" << ei << ": "
<< element_printouts[ei];
sep = ",\n";
outer_sep = "";
}
}
}
return result;
}
bool UnorderedElementsAreMatcherImplBase::FindPairing(
const MatchMatrix& matrix, MatchResultListener* listener) const {
ElementMatcherPairs matches = FindMaxBipartiteMatching(matrix);
size_t max_flow = matches.size();
if ((match_flags() & UnorderedMatcherRequire::Superset) &&
max_flow < matrix.RhsSize()) {
if (listener->IsInterested()) {
*listener << "where no permutation of the elements can satisfy all "
"matchers, and the closest match is "
<< max_flow << " of " << matrix.RhsSize()
<< " matchers with the pairings:\n";
LogElementMatcherPairVec(matches, listener->stream());
}
return false;
}
if ((match_flags() & UnorderedMatcherRequire::Subset) &&
max_flow < matrix.LhsSize()) {
if (listener->IsInterested()) {
*listener
<< "where not all elements can be matched, and the closest match is "
<< max_flow << " of " << matrix.RhsSize()
<< " matchers with the pairings:\n";
LogElementMatcherPairVec(matches, listener->stream());
}
return false;
}
if (matches.size() > 1) {
if (listener->IsInterested()) {
const char* sep = "where:\n";
for (size_t mi = 0; mi < matches.size(); ++mi) {
*listener << sep << " - element #" << matches[mi].first
<< " is matched by matcher #" << matches[mi].second;
sep = ",\n";
}
}
}
return true;
}
} // namespace internal
} // namespace testing

@ -0,0 +1,888 @@
// Copyright 2007, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Google Mock - a framework for writing C++ mock classes.
//
// This file implements the spec builder syntax (ON_CALL and
// EXPECT_CALL).
#include "gmock/gmock-spec-builders.h"
#include <stdlib.h>
#include <iostream> // NOLINT
#include <map>
#include <memory>
#include <set>
#include <string>
#include <vector>
#include "gmock/gmock.h"
#include "gtest/gtest.h"
#if GTEST_OS_CYGWIN || GTEST_OS_LINUX || GTEST_OS_MAC
# include <unistd.h> // NOLINT
#endif
// Silence C4800 (C4800: 'int *const ': forcing value
// to bool 'true' or 'false') for MSVC 15
#ifdef _MSC_VER
#if _MSC_VER == 1900
# pragma warning(push)
# pragma warning(disable:4800)
#endif
#endif
namespace testing {
namespace internal {
// Protects the mock object registry (in class Mock), all function
// mockers, and all expectations.
GTEST_API_ GTEST_DEFINE_STATIC_MUTEX_(g_gmock_mutex);
// Logs a message including file and line number information.
GTEST_API_ void LogWithLocation(testing::internal::LogSeverity severity,
const char* file, int line,
const std::string& message) {
::std::ostringstream s;
s << file << ":" << line << ": " << message << ::std::endl;
Log(severity, s.str(), 0);
}
// Constructs an ExpectationBase object.
ExpectationBase::ExpectationBase(const char* a_file, int a_line,
const std::string& a_source_text)
: file_(a_file),
line_(a_line),
source_text_(a_source_text),
cardinality_specified_(false),
cardinality_(Exactly(1)),
call_count_(0),
retired_(false),
extra_matcher_specified_(false),
repeated_action_specified_(false),
retires_on_saturation_(false),
last_clause_(kNone),
action_count_checked_(false) {}
// Destructs an ExpectationBase object.
ExpectationBase::~ExpectationBase() {}
// Explicitly specifies the cardinality of this expectation. Used by
// the subclasses to implement the .Times() clause.
void ExpectationBase::SpecifyCardinality(const Cardinality& a_cardinality) {
cardinality_specified_ = true;
cardinality_ = a_cardinality;
}
// Retires all pre-requisites of this expectation.
void ExpectationBase::RetireAllPreRequisites()
GTEST_EXCLUSIVE_LOCK_REQUIRED_(g_gmock_mutex) {
if (is_retired()) {
// We can take this short-cut as we never retire an expectation
// until we have retired all its pre-requisites.
return;
}
::std::vector<ExpectationBase*> expectations(1, this);
while (!expectations.empty()) {
ExpectationBase* exp = expectations.back();
expectations.pop_back();
for (ExpectationSet::const_iterator it =
exp->immediate_prerequisites_.begin();
it != exp->immediate_prerequisites_.end(); ++it) {
ExpectationBase* next = it->expectation_base().get();
if (!next->is_retired()) {
next->Retire();
expectations.push_back(next);
}
}
}
}
// Returns true if and only if all pre-requisites of this expectation
// have been satisfied.
bool ExpectationBase::AllPrerequisitesAreSatisfied() const
GTEST_EXCLUSIVE_LOCK_REQUIRED_(g_gmock_mutex) {
g_gmock_mutex.AssertHeld();
::std::vector<const ExpectationBase*> expectations(1, this);
while (!expectations.empty()) {
const ExpectationBase* exp = expectations.back();
expectations.pop_back();
for (ExpectationSet::const_iterator it =
exp->immediate_prerequisites_.begin();
it != exp->immediate_prerequisites_.end(); ++it) {
const ExpectationBase* next = it->expectation_base().get();
if (!next->IsSatisfied()) return false;
expectations.push_back(next);
}
}
return true;
}
// Adds unsatisfied pre-requisites of this expectation to 'result'.
void ExpectationBase::FindUnsatisfiedPrerequisites(ExpectationSet* result) const
GTEST_EXCLUSIVE_LOCK_REQUIRED_(g_gmock_mutex) {
g_gmock_mutex.AssertHeld();
::std::vector<const ExpectationBase*> expectations(1, this);
while (!expectations.empty()) {
const ExpectationBase* exp = expectations.back();
expectations.pop_back();
for (ExpectationSet::const_iterator it =
exp->immediate_prerequisites_.begin();
it != exp->immediate_prerequisites_.end(); ++it) {
const ExpectationBase* next = it->expectation_base().get();
if (next->IsSatisfied()) {
// If *it is satisfied and has a call count of 0, some of its
// pre-requisites may not be satisfied yet.
if (next->call_count_ == 0) {
expectations.push_back(next);
}
} else {
// Now that we know next is unsatisfied, we are not so interested
// in whether its pre-requisites are satisfied. Therefore we
// don't iterate into it here.
*result += *it;
}
}
}
}
// Describes how many times a function call matching this
// expectation has occurred.
void ExpectationBase::DescribeCallCountTo(::std::ostream* os) const
GTEST_EXCLUSIVE_LOCK_REQUIRED_(g_gmock_mutex) {
g_gmock_mutex.AssertHeld();
// Describes how many times the function is expected to be called.
*os << " Expected: to be ";
cardinality().DescribeTo(os);
*os << "\n Actual: ";
Cardinality::DescribeActualCallCountTo(call_count(), os);
// Describes the state of the expectation (e.g. is it satisfied?
// is it active?).
*os << " - " << (IsOverSaturated() ? "over-saturated" :
IsSaturated() ? "saturated" :
IsSatisfied() ? "satisfied" : "unsatisfied")
<< " and "
<< (is_retired() ? "retired" : "active");
}
// Checks the action count (i.e. the number of WillOnce() and
// WillRepeatedly() clauses) against the cardinality if this hasn't
// been done before. Prints a warning if there are too many or too
// few actions.
void ExpectationBase::CheckActionCountIfNotDone() const
GTEST_LOCK_EXCLUDED_(mutex_) {
bool should_check = false;
{
MutexLock l(&mutex_);
if (!action_count_checked_) {
action_count_checked_ = true;
should_check = true;
}
}
if (should_check) {
if (!cardinality_specified_) {
// The cardinality was inferred - no need to check the action
// count against it.
return;
}
// The cardinality was explicitly specified.
const int action_count = static_cast<int>(untyped_actions_.size());
const int upper_bound = cardinality().ConservativeUpperBound();
const int lower_bound = cardinality().ConservativeLowerBound();
bool too_many; // True if there are too many actions, or false
// if there are too few.
if (action_count > upper_bound ||
(action_count == upper_bound && repeated_action_specified_)) {
too_many = true;
} else if (0 < action_count && action_count < lower_bound &&
!repeated_action_specified_) {
too_many = false;
} else {
return;
}
::std::stringstream ss;
DescribeLocationTo(&ss);
ss << "Too " << (too_many ? "many" : "few")
<< " actions specified in " << source_text() << "...\n"
<< "Expected to be ";
cardinality().DescribeTo(&ss);
ss << ", but has " << (too_many ? "" : "only ")
<< action_count << " WillOnce()"
<< (action_count == 1 ? "" : "s");
if (repeated_action_specified_) {
ss << " and a WillRepeatedly()";
}
ss << ".";
Log(kWarning, ss.str(), -1); // -1 means "don't print stack trace".
}
}
// Implements the .Times() clause.
void ExpectationBase::UntypedTimes(const Cardinality& a_cardinality) {
if (last_clause_ == kTimes) {
ExpectSpecProperty(false,
".Times() cannot appear "
"more than once in an EXPECT_CALL().");
} else {
ExpectSpecProperty(last_clause_ < kTimes,
".Times() cannot appear after "
".InSequence(), .WillOnce(), .WillRepeatedly(), "
"or .RetiresOnSaturation().");
}
last_clause_ = kTimes;
SpecifyCardinality(a_cardinality);
}
// Points to the implicit sequence introduced by a living InSequence
// object (if any) in the current thread or NULL.
GTEST_API_ ThreadLocal<Sequence*> g_gmock_implicit_sequence;
// Reports an uninteresting call (whose description is in msg) in the
// manner specified by 'reaction'.
void ReportUninterestingCall(CallReaction reaction, const std::string& msg) {
// Include a stack trace only if --gmock_verbose=info is specified.
const int stack_frames_to_skip =
GMOCK_FLAG(verbose) == kInfoVerbosity ? 3 : -1;
switch (reaction) {
case kAllow:
Log(kInfo, msg, stack_frames_to_skip);
break;
case kWarn:
Log(kWarning,
msg +
"\nNOTE: You can safely ignore the above warning unless this "
"call should not happen. Do not suppress it by blindly adding "
"an EXPECT_CALL() if you don't mean to enforce the call. "
"See "
"https://github.com/google/googletest/blob/master/googlemock/"
"docs/cook_book.md#"
"knowing-when-to-expect for details.\n",
stack_frames_to_skip);
break;
default: // FAIL
Expect(false, nullptr, -1, msg);
}
}
UntypedFunctionMockerBase::UntypedFunctionMockerBase()
: mock_obj_(nullptr), name_("") {}
UntypedFunctionMockerBase::~UntypedFunctionMockerBase() {}
// Sets the mock object this mock method belongs to, and registers
// this information in the global mock registry. Will be called
// whenever an EXPECT_CALL() or ON_CALL() is executed on this mock
// method.
void UntypedFunctionMockerBase::RegisterOwner(const void* mock_obj)
GTEST_LOCK_EXCLUDED_(g_gmock_mutex) {
{
MutexLock l(&g_gmock_mutex);
mock_obj_ = mock_obj;
}
Mock::Register(mock_obj, this);
}
// Sets the mock object this mock method belongs to, and sets the name
// of the mock function. Will be called upon each invocation of this
// mock function.
void UntypedFunctionMockerBase::SetOwnerAndName(const void* mock_obj,
const char* name)
GTEST_LOCK_EXCLUDED_(g_gmock_mutex) {
// We protect name_ under g_gmock_mutex in case this mock function
// is called from two threads concurrently.
MutexLock l(&g_gmock_mutex);
mock_obj_ = mock_obj;
name_ = name;
}
// Returns the name of the function being mocked. Must be called
// after RegisterOwner() or SetOwnerAndName() has been called.
const void* UntypedFunctionMockerBase::MockObject() const
GTEST_LOCK_EXCLUDED_(g_gmock_mutex) {
const void* mock_obj;
{
// We protect mock_obj_ under g_gmock_mutex in case this mock
// function is called from two threads concurrently.
MutexLock l(&g_gmock_mutex);
Assert(mock_obj_ != nullptr, __FILE__, __LINE__,
"MockObject() must not be called before RegisterOwner() or "
"SetOwnerAndName() has been called.");
mock_obj = mock_obj_;
}
return mock_obj;
}
// Returns the name of this mock method. Must be called after
// SetOwnerAndName() has been called.
const char* UntypedFunctionMockerBase::Name() const
GTEST_LOCK_EXCLUDED_(g_gmock_mutex) {
const char* name;
{
// We protect name_ under g_gmock_mutex in case this mock
// function is called from two threads concurrently.
MutexLock l(&g_gmock_mutex);
Assert(name_ != nullptr, __FILE__, __LINE__,
"Name() must not be called before SetOwnerAndName() has "
"been called.");
name = name_;
}
return name;
}
// Calculates the result of invoking this mock function with the given
// arguments, prints it, and returns it. The caller is responsible
// for deleting the result.
UntypedActionResultHolderBase* UntypedFunctionMockerBase::UntypedInvokeWith(
void* const untyped_args) GTEST_LOCK_EXCLUDED_(g_gmock_mutex) {
// See the definition of untyped_expectations_ for why access to it
// is unprotected here.
if (untyped_expectations_.size() == 0) {
// No expectation is set on this mock method - we have an
// uninteresting call.
// We must get Google Mock's reaction on uninteresting calls
// made on this mock object BEFORE performing the action,
// because the action may DELETE the mock object and make the
// following expression meaningless.
const CallReaction reaction =
Mock::GetReactionOnUninterestingCalls(MockObject());
// True if and only if we need to print this call's arguments and return
// value. This definition must be kept in sync with
// the behavior of ReportUninterestingCall().
const bool need_to_report_uninteresting_call =
// If the user allows this uninteresting call, we print it
// only when they want informational messages.
reaction == kAllow ? LogIsVisible(kInfo) :
// If the user wants this to be a warning, we print
// it only when they want to see warnings.
reaction == kWarn
? LogIsVisible(kWarning)
:
// Otherwise, the user wants this to be an error, and we
// should always print detailed information in the error.
true;
if (!need_to_report_uninteresting_call) {
// Perform the action without printing the call information.
return this->UntypedPerformDefaultAction(
untyped_args, "Function call: " + std::string(Name()));
}
// Warns about the uninteresting call.
::std::stringstream ss;
this->UntypedDescribeUninterestingCall(untyped_args, &ss);
// Calculates the function result.
UntypedActionResultHolderBase* const result =
this->UntypedPerformDefaultAction(untyped_args, ss.str());
// Prints the function result.
if (result != nullptr) result->PrintAsActionResult(&ss);
ReportUninterestingCall(reaction, ss.str());
return result;
}
bool is_excessive = false;
::std::stringstream ss;
::std::stringstream why;
::std::stringstream loc;
const void* untyped_action = nullptr;
// The UntypedFindMatchingExpectation() function acquires and
// releases g_gmock_mutex.
const ExpectationBase* const untyped_expectation =
this->UntypedFindMatchingExpectation(
untyped_args, &untyped_action, &is_excessive,
&ss, &why);
const bool found = untyped_expectation != nullptr;
// True if and only if we need to print the call's arguments
// and return value.
// This definition must be kept in sync with the uses of Expect()
// and Log() in this function.
const bool need_to_report_call =
!found || is_excessive || LogIsVisible(kInfo);
if (!need_to_report_call) {
// Perform the action without printing the call information.
return untyped_action == nullptr
? this->UntypedPerformDefaultAction(untyped_args, "")
: this->UntypedPerformAction(untyped_action, untyped_args);
}
ss << " Function call: " << Name();
this->UntypedPrintArgs(untyped_args, &ss);
// In case the action deletes a piece of the expectation, we
// generate the message beforehand.
if (found && !is_excessive) {
untyped_expectation->DescribeLocationTo(&loc);
}
UntypedActionResultHolderBase* const result =
untyped_action == nullptr
? this->UntypedPerformDefaultAction(untyped_args, ss.str())
: this->UntypedPerformAction(untyped_action, untyped_args);
if (result != nullptr) result->PrintAsActionResult(&ss);
ss << "\n" << why.str();
if (!found) {
// No expectation matches this call - reports a failure.
Expect(false, nullptr, -1, ss.str());
} else if (is_excessive) {
// We had an upper-bound violation and the failure message is in ss.
Expect(false, untyped_expectation->file(),
untyped_expectation->line(), ss.str());
} else {
// We had an expected call and the matching expectation is
// described in ss.
Log(kInfo, loc.str() + ss.str(), 2);
}
return result;
}
// Returns an Expectation object that references and co-owns exp,
// which must be an expectation on this mock function.
Expectation UntypedFunctionMockerBase::GetHandleOf(ExpectationBase* exp) {
// See the definition of untyped_expectations_ for why access to it
// is unprotected here.
for (UntypedExpectations::const_iterator it =
untyped_expectations_.begin();
it != untyped_expectations_.end(); ++it) {
if (it->get() == exp) {
return Expectation(*it);
}
}
Assert(false, __FILE__, __LINE__, "Cannot find expectation.");
return Expectation();
// The above statement is just to make the code compile, and will
// never be executed.
}
// Verifies that all expectations on this mock function have been
// satisfied. Reports one or more Google Test non-fatal failures
// and returns false if not.
bool UntypedFunctionMockerBase::VerifyAndClearExpectationsLocked()
GTEST_EXCLUSIVE_LOCK_REQUIRED_(g_gmock_mutex) {
g_gmock_mutex.AssertHeld();
bool expectations_met = true;
for (UntypedExpectations::const_iterator it =
untyped_expectations_.begin();
it != untyped_expectations_.end(); ++it) {
ExpectationBase* const untyped_expectation = it->get();
if (untyped_expectation->IsOverSaturated()) {
// There was an upper-bound violation. Since the error was
// already reported when it occurred, there is no need to do
// anything here.
expectations_met = false;
} else if (!untyped_expectation->IsSatisfied()) {
expectations_met = false;
::std::stringstream ss;
ss << "Actual function call count doesn't match "
<< untyped_expectation->source_text() << "...\n";
// No need to show the source file location of the expectation
// in the description, as the Expect() call that follows already
// takes care of it.
untyped_expectation->MaybeDescribeExtraMatcherTo(&ss);
untyped_expectation->DescribeCallCountTo(&ss);
Expect(false, untyped_expectation->file(),
untyped_expectation->line(), ss.str());
}
}
// Deleting our expectations may trigger other mock objects to be deleted, for
// example if an action contains a reference counted smart pointer to that
// mock object, and that is the last reference. So if we delete our
// expectations within the context of the global mutex we may deadlock when
// this method is called again. Instead, make a copy of the set of
// expectations to delete, clear our set within the mutex, and then clear the
// copied set outside of it.
UntypedExpectations expectations_to_delete;
untyped_expectations_.swap(expectations_to_delete);
g_gmock_mutex.Unlock();
expectations_to_delete.clear();
g_gmock_mutex.Lock();
return expectations_met;
}
CallReaction intToCallReaction(int mock_behavior) {
if (mock_behavior >= kAllow && mock_behavior <= kFail) {
return static_cast<internal::CallReaction>(mock_behavior);
}
return kWarn;
}
} // namespace internal
// Class Mock.
namespace {
typedef std::set<internal::UntypedFunctionMockerBase*> FunctionMockers;
// The current state of a mock object. Such information is needed for
// detecting leaked mock objects and explicitly verifying a mock's
// expectations.
struct MockObjectState {
MockObjectState()
: first_used_file(nullptr), first_used_line(-1), leakable(false) {}
// Where in the source file an ON_CALL or EXPECT_CALL is first
// invoked on this mock object.
const char* first_used_file;
int first_used_line;
::std::string first_used_test_suite;
::std::string first_used_test;
bool leakable; // true if and only if it's OK to leak the object.
FunctionMockers function_mockers; // All registered methods of the object.
};
// A global registry holding the state of all mock objects that are
// alive. A mock object is added to this registry the first time
// Mock::AllowLeak(), ON_CALL(), or EXPECT_CALL() is called on it. It
// is removed from the registry in the mock object's destructor.
class MockObjectRegistry {
public:
// Maps a mock object (identified by its address) to its state.
typedef std::map<const void*, MockObjectState> StateMap;
// This destructor will be called when a program exits, after all
// tests in it have been run. By then, there should be no mock
// object alive. Therefore we report any living object as test
// failure, unless the user explicitly asked us to ignore it.
~MockObjectRegistry() {
if (!GMOCK_FLAG(catch_leaked_mocks))
return;
int leaked_count = 0;
for (StateMap::const_iterator it = states_.begin(); it != states_.end();
++it) {
if (it->second.leakable) // The user said it's fine to leak this object.
continue;
// FIXME: Print the type of the leaked object.
// This can help the user identify the leaked object.
std::cout << "\n";
const MockObjectState& state = it->second;
std::cout << internal::FormatFileLocation(state.first_used_file,
state.first_used_line);
std::cout << " ERROR: this mock object";
if (state.first_used_test != "") {
std::cout << " (used in test " << state.first_used_test_suite << "."
<< state.first_used_test << ")";
}
std::cout << " should be deleted but never is. Its address is @"
<< it->first << ".";
leaked_count++;
}
if (leaked_count > 0) {
std::cout << "\nERROR: " << leaked_count << " leaked mock "
<< (leaked_count == 1 ? "object" : "objects")
<< " found at program exit. Expectations on a mock object is "
"verified when the object is destructed. Leaking a mock "
"means that its expectations aren't verified, which is "
"usually a test bug. If you really intend to leak a mock, "
"you can suppress this error using "
"testing::Mock::AllowLeak(mock_object), or you may use a "
"fake or stub instead of a mock.\n";
std::cout.flush();
::std::cerr.flush();
// RUN_ALL_TESTS() has already returned when this destructor is
// called. Therefore we cannot use the normal Google Test
// failure reporting mechanism.
_exit(1); // We cannot call exit() as it is not reentrant and
// may already have been called.
}
}
StateMap& states() { return states_; }
private:
StateMap states_;
};
// Protected by g_gmock_mutex.
MockObjectRegistry g_mock_object_registry;
// Maps a mock object to the reaction Google Mock should have when an
// uninteresting method is called. Protected by g_gmock_mutex.
std::map<const void*, internal::CallReaction> g_uninteresting_call_reaction;
// Sets the reaction Google Mock should have when an uninteresting
// method of the given mock object is called.
void SetReactionOnUninterestingCalls(const void* mock_obj,
internal::CallReaction reaction)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
internal::MutexLock l(&internal::g_gmock_mutex);
g_uninteresting_call_reaction[mock_obj] = reaction;
}
} // namespace
// Tells Google Mock to allow uninteresting calls on the given mock
// object.
void Mock::AllowUninterestingCalls(const void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
SetReactionOnUninterestingCalls(mock_obj, internal::kAllow);
}
// Tells Google Mock to warn the user about uninteresting calls on the
// given mock object.
void Mock::WarnUninterestingCalls(const void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
SetReactionOnUninterestingCalls(mock_obj, internal::kWarn);
}
// Tells Google Mock to fail uninteresting calls on the given mock
// object.
void Mock::FailUninterestingCalls(const void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
SetReactionOnUninterestingCalls(mock_obj, internal::kFail);
}
// Tells Google Mock the given mock object is being destroyed and its
// entry in the call-reaction table should be removed.
void Mock::UnregisterCallReaction(const void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
internal::MutexLock l(&internal::g_gmock_mutex);
g_uninteresting_call_reaction.erase(mock_obj);
}
// Returns the reaction Google Mock will have on uninteresting calls
// made on the given mock object.
internal::CallReaction Mock::GetReactionOnUninterestingCalls(
const void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
internal::MutexLock l(&internal::g_gmock_mutex);
return (g_uninteresting_call_reaction.count(mock_obj) == 0) ?
internal::intToCallReaction(GMOCK_FLAG(default_mock_behavior)) :
g_uninteresting_call_reaction[mock_obj];
}
// Tells Google Mock to ignore mock_obj when checking for leaked mock
// objects.
void Mock::AllowLeak(const void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
internal::MutexLock l(&internal::g_gmock_mutex);
g_mock_object_registry.states()[mock_obj].leakable = true;
}
// Verifies and clears all expectations on the given mock object. If
// the expectations aren't satisfied, generates one or more Google
// Test non-fatal failures and returns false.
bool Mock::VerifyAndClearExpectations(void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
internal::MutexLock l(&internal::g_gmock_mutex);
return VerifyAndClearExpectationsLocked(mock_obj);
}
// Verifies all expectations on the given mock object and clears its
// default actions and expectations. Returns true if and only if the
// verification was successful.
bool Mock::VerifyAndClear(void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
internal::MutexLock l(&internal::g_gmock_mutex);
ClearDefaultActionsLocked(mock_obj);
return VerifyAndClearExpectationsLocked(mock_obj);
}
// Verifies and clears all expectations on the given mock object. If
// the expectations aren't satisfied, generates one or more Google
// Test non-fatal failures and returns false.
bool Mock::VerifyAndClearExpectationsLocked(void* mock_obj)
GTEST_EXCLUSIVE_LOCK_REQUIRED_(internal::g_gmock_mutex) {
internal::g_gmock_mutex.AssertHeld();
if (g_mock_object_registry.states().count(mock_obj) == 0) {
// No EXPECT_CALL() was set on the given mock object.
return true;
}
// Verifies and clears the expectations on each mock method in the
// given mock object.
bool expectations_met = true;
FunctionMockers& mockers =
g_mock_object_registry.states()[mock_obj].function_mockers;
for (FunctionMockers::const_iterator it = mockers.begin();
it != mockers.end(); ++it) {
if (!(*it)->VerifyAndClearExpectationsLocked()) {
expectations_met = false;
}
}
// We don't clear the content of mockers, as they may still be
// needed by ClearDefaultActionsLocked().
return expectations_met;
}
bool Mock::IsNaggy(void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
return Mock::GetReactionOnUninterestingCalls(mock_obj) == internal::kWarn;
}
bool Mock::IsNice(void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
return Mock::GetReactionOnUninterestingCalls(mock_obj) == internal::kAllow;
}
bool Mock::IsStrict(void* mock_obj)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
return Mock::GetReactionOnUninterestingCalls(mock_obj) == internal::kFail;
}
// Registers a mock object and a mock method it owns.
void Mock::Register(const void* mock_obj,
internal::UntypedFunctionMockerBase* mocker)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
internal::MutexLock l(&internal::g_gmock_mutex);
g_mock_object_registry.states()[mock_obj].function_mockers.insert(mocker);
}
// Tells Google Mock where in the source code mock_obj is used in an
// ON_CALL or EXPECT_CALL. In case mock_obj is leaked, this
// information helps the user identify which object it is.
void Mock::RegisterUseByOnCallOrExpectCall(const void* mock_obj,
const char* file, int line)
GTEST_LOCK_EXCLUDED_(internal::g_gmock_mutex) {
internal::MutexLock l(&internal::g_gmock_mutex);
MockObjectState& state = g_mock_object_registry.states()[mock_obj];
if (state.first_used_file == nullptr) {
state.first_used_file = file;
state.first_used_line = line;
const TestInfo* const test_info =
UnitTest::GetInstance()->current_test_info();
if (test_info != nullptr) {
state.first_used_test_suite = test_info->test_suite_name();
state.first_used_test = test_info->name();
}
}
}
// Unregisters a mock method; removes the owning mock object from the
// registry when the last mock method associated with it has been
// unregistered. This is called only in the destructor of
// FunctionMockerBase.
void Mock::UnregisterLocked(internal::UntypedFunctionMockerBase* mocker)
GTEST_EXCLUSIVE_LOCK_REQUIRED_(internal::g_gmock_mutex) {
internal::g_gmock_mutex.AssertHeld();
for (MockObjectRegistry::StateMap::iterator it =
g_mock_object_registry.states().begin();
it != g_mock_object_registry.states().end(); ++it) {
FunctionMockers& mockers = it->second.function_mockers;
if (mockers.erase(mocker) > 0) {
// mocker was in mockers and has been just removed.
if (mockers.empty()) {
g_mock_object_registry.states().erase(it);
}
return;
}
}
}
// Clears all ON_CALL()s set on the given mock object.
void Mock::ClearDefaultActionsLocked(void* mock_obj)
GTEST_EXCLUSIVE_LOCK_REQUIRED_(internal::g_gmock_mutex) {
internal::g_gmock_mutex.AssertHeld();
if (g_mock_object_registry.states().count(mock_obj) == 0) {
// No ON_CALL() was set on the given mock object.
return;
}
// Clears the default actions for each mock method in the given mock
// object.
FunctionMockers& mockers =
g_mock_object_registry.states()[mock_obj].function_mockers;
for (FunctionMockers::const_iterator it = mockers.begin();
it != mockers.end(); ++it) {
(*it)->ClearDefaultActionsLocked();
}
// We don't clear the content of mockers, as they may still be
// needed by VerifyAndClearExpectationsLocked().
}
Expectation::Expectation() {}
Expectation::Expectation(
const std::shared_ptr<internal::ExpectationBase>& an_expectation_base)
: expectation_base_(an_expectation_base) {}
Expectation::~Expectation() {}
// Adds an expectation to a sequence.
void Sequence::AddExpectation(const Expectation& expectation) const {
if (*last_expectation_ != expectation) {
if (last_expectation_->expectation_base() != nullptr) {
expectation.expectation_base()->immediate_prerequisites_
+= *last_expectation_;
}
*last_expectation_ = expectation;
}
}
// Creates the implicit sequence if there isn't one.
InSequence::InSequence() {
if (internal::g_gmock_implicit_sequence.get() == nullptr) {
internal::g_gmock_implicit_sequence.set(new Sequence);
sequence_created_ = true;
} else {
sequence_created_ = false;
}
}
// Deletes the implicit sequence if it was created by the constructor
// of this object.
InSequence::~InSequence() {
if (sequence_created_) {
delete internal::g_gmock_implicit_sequence.get();
internal::g_gmock_implicit_sequence.set(nullptr);
}
}
} // namespace testing
#ifdef _MSC_VER
#if _MSC_VER == 1900
# pragma warning(pop)
#endif
#endif

@ -0,0 +1,213 @@
// Copyright 2008, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include "gmock/gmock.h"
#include "gmock/internal/gmock-port.h"
namespace testing {
GMOCK_DEFINE_bool_(catch_leaked_mocks, true,
"true if and only if Google Mock should report leaked "
"mock objects as failures.");
GMOCK_DEFINE_string_(verbose, internal::kWarningVerbosity,
"Controls how verbose Google Mock's output is."
" Valid values:\n"
" info - prints all messages.\n"
" warning - prints warnings and errors.\n"
" error - prints errors only.");
GMOCK_DEFINE_int32_(default_mock_behavior, 1,
"Controls the default behavior of mocks."
" Valid values:\n"
" 0 - by default, mocks act as NiceMocks.\n"
" 1 - by default, mocks act as NaggyMocks.\n"
" 2 - by default, mocks act as StrictMocks.");
namespace internal {
// Parses a string as a command line flag. The string should have the
// format "--gmock_flag=value". When def_optional is true, the
// "=value" part can be omitted.
//
// Returns the value of the flag, or NULL if the parsing failed.
static const char* ParseGoogleMockFlagValue(const char* str,
const char* flag,
bool def_optional) {
// str and flag must not be NULL.
if (str == nullptr || flag == nullptr) return nullptr;
// The flag must start with "--gmock_".
const std::string flag_str = std::string("--gmock_") + flag;
const size_t flag_len = flag_str.length();
if (strncmp(str, flag_str.c_str(), flag_len) != 0) return nullptr;
// Skips the flag name.
const char* flag_end = str + flag_len;
// When def_optional is true, it's OK to not have a "=value" part.
if (def_optional && (flag_end[0] == '\0')) {
return flag_end;
}
// If def_optional is true and there are more characters after the
// flag name, or if def_optional is false, there must be a '=' after
// the flag name.
if (flag_end[0] != '=') return nullptr;
// Returns the string after "=".
return flag_end + 1;
}
// Parses a string for a Google Mock bool flag, in the form of
// "--gmock_flag=value".
//
// On success, stores the value of the flag in *value, and returns
// true. On failure, returns false without changing *value.
static bool ParseGoogleMockBoolFlag(const char* str, const char* flag,
bool* value) {
// Gets the value of the flag as a string.
const char* const value_str = ParseGoogleMockFlagValue(str, flag, true);
// Aborts if the parsing failed.
if (value_str == nullptr) return false;
// Converts the string value to a bool.
*value = !(*value_str == '0' || *value_str == 'f' || *value_str == 'F');
return true;
}
// Parses a string for a Google Mock string flag, in the form of
// "--gmock_flag=value".
//
// On success, stores the value of the flag in *value, and returns
// true. On failure, returns false without changing *value.
template <typename String>
static bool ParseGoogleMockStringFlag(const char* str, const char* flag,
String* value) {
// Gets the value of the flag as a string.
const char* const value_str = ParseGoogleMockFlagValue(str, flag, false);
// Aborts if the parsing failed.
if (value_str == nullptr) return false;
// Sets *value to the value of the flag.
*value = value_str;
return true;
}
static bool ParseGoogleMockIntFlag(const char* str, const char* flag,
int* value) {
// Gets the value of the flag as a string.
const char* const value_str = ParseGoogleMockFlagValue(str, flag, true);
// Aborts if the parsing failed.
if (value_str == nullptr) return false;
// Sets *value to the value of the flag.
return ParseInt32(Message() << "The value of flag --" << flag,
value_str, value);
}
// The internal implementation of InitGoogleMock().
//
// The type parameter CharType can be instantiated to either char or
// wchar_t.
template <typename CharType>
void InitGoogleMockImpl(int* argc, CharType** argv) {
// Makes sure Google Test is initialized. InitGoogleTest() is
// idempotent, so it's fine if the user has already called it.
InitGoogleTest(argc, argv);
if (*argc <= 0) return;
for (int i = 1; i != *argc; i++) {
const std::string arg_string = StreamableToString(argv[i]);
const char* const arg = arg_string.c_str();
// Do we see a Google Mock flag?
if (ParseGoogleMockBoolFlag(arg, "catch_leaked_mocks",
&GMOCK_FLAG(catch_leaked_mocks)) ||
ParseGoogleMockStringFlag(arg, "verbose", &GMOCK_FLAG(verbose)) ||
ParseGoogleMockIntFlag(arg, "default_mock_behavior",
&GMOCK_FLAG(default_mock_behavior))) {
// Yes. Shift the remainder of the argv list left by one. Note
// that argv has (*argc + 1) elements, the last one always being
// NULL. The following loop moves the trailing NULL element as
// well.
for (int j = i; j != *argc; j++) {
argv[j] = argv[j + 1];
}
// Decrements the argument count.
(*argc)--;
// We also need to decrement the iterator as we just removed
// an element.
i--;
}
}
}
} // namespace internal
// Initializes Google Mock. This must be called before running the
// tests. In particular, it parses a command line for the flags that
// Google Mock recognizes. Whenever a Google Mock flag is seen, it is
// removed from argv, and *argc is decremented.
//
// No value is returned. Instead, the Google Mock flag variables are
// updated.
//
// Since Google Test is needed for Google Mock to work, this function
// also initializes Google Test and parses its flags, if that hasn't
// been done.
GTEST_API_ void InitGoogleMock(int* argc, char** argv) {
internal::InitGoogleMockImpl(argc, argv);
}
// This overloaded version can be used in Windows programs compiled in
// UNICODE mode.
GTEST_API_ void InitGoogleMock(int* argc, wchar_t** argv) {
internal::InitGoogleMockImpl(argc, argv);
}
// This overloaded version can be used on Arduino/embedded platforms where
// there is no argc/argv.
GTEST_API_ void InitGoogleMock() {
// Since Arduino doesn't have a command line, fake out the argc/argv arguments
int argc = 1;
const auto arg0 = "dummy";
char* argv0 = const_cast<char*>(arg0);
char** argv = &argv0;
internal::InitGoogleMockImpl(&argc, argv);
}
} // namespace testing

@ -0,0 +1,65 @@
// Copyright 2008, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include <iostream>
#include "gmock/gmock.h"
#include "gtest/gtest.h"
#ifdef ARDUINO
void setup() {
// Since Google Mock depends on Google Test, InitGoogleMock() is
// also responsible for initializing Google Test. Therefore there's
// no need for calling testing::InitGoogleTest() separately.
testing::InitGoogleMock();
}
void loop() { RUN_ALL_TESTS(); }
#else
// MS C++ compiler/linker has a bug on Windows (not on Windows CE), which
// causes a link error when _tmain is defined in a static library and UNICODE
// is enabled. For this reason instead of _tmain, main function is used on
// Windows. See the following link to track the current status of this bug:
// https://web.archive.org/web/20170912203238/connect.microsoft.com/VisualStudio/feedback/details/394464/wmain-link-error-in-the-static-library
// // NOLINT
#if GTEST_OS_WINDOWS_MOBILE
# include <tchar.h> // NOLINT
GTEST_API_ int _tmain(int argc, TCHAR** argv) {
#else
GTEST_API_ int main(int argc, char** argv) {
#endif // GTEST_OS_WINDOWS_MOBILE
std::cout << "Running main() from gmock_main.cc\n";
// Since Google Mock depends on Google Test, InitGoogleMock() is
// also responsible for initializing Google Test. Therefore there's
// no need for calling testing::InitGoogleTest() separately.
testing::InitGoogleMock(&argc, argv);
return RUN_ALL_TESTS();
}
#endif

@ -0,0 +1,110 @@
# Copyright 2017 Google Inc.
# All Rights Reserved.
#
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Author: misterg@google.com (Gennadiy Civil)
#
# Bazel Build for Google C++ Testing Framework(Google Test)-googlemock
load("@rules_cc//cc:defs.bzl", "cc_binary", "cc_test")
load("@rules_python//python:defs.bzl", "py_library", "py_test")
licenses(["notice"])
# Tests for GMock itself
cc_test(
name = "gmock_all_test",
size = "small",
srcs = glob(include = ["gmock-*.cc"]),
linkopts = select({
"//:windows": [],
"//conditions:default": ["-pthread"],
}),
deps = ["//:gtest"],
)
# Python tests
py_library(
name = "gmock_test_utils",
testonly = 1,
srcs = ["gmock_test_utils.py"],
)
cc_binary(
name = "gmock_leak_test_",
testonly = 1,
srcs = ["gmock_leak_test_.cc"],
deps = ["//:gtest_main"],
)
py_test(
name = "gmock_leak_test",
size = "medium",
srcs = ["gmock_leak_test.py"],
data = [
":gmock_leak_test_",
":gmock_test_utils",
],
)
cc_test(
name = "gmock_link_test",
size = "small",
srcs = [
"gmock_link2_test.cc",
"gmock_link_test.cc",
"gmock_link_test.h",
],
deps = ["//:gtest_main"],
)
cc_binary(
name = "gmock_output_test_",
srcs = ["gmock_output_test_.cc"],
deps = ["//:gtest"],
)
py_test(
name = "gmock_output_test",
size = "medium",
srcs = ["gmock_output_test.py"],
data = [
":gmock_output_test_",
":gmock_output_test_golden.txt",
],
python_version = "PY2",
deps = [":gmock_test_utils"],
)
cc_test(
name = "gmock_test",
size = "small",
srcs = ["gmock_test.cc"],
deps = ["//:gtest_main"],
)

Some files were not shown because too many files have changed in this diff Show More

Loading…
Cancel
Save