Kaleidoscope/docs/api-reference/event-handler-hooks.md

12 KiB

Kaleidoscope's Plugin Event Handlers

Kaleidoscope provides a set of hook functions that plugins can define in order to do their work. If one or more of the functions listed here are defined as methods in a plugin class, that plugin can act on the input events that drive Kaleidoscope.

In response to input events (plus a few other places), Kaleidoscope calls the event handlers for each plugin that defines them, in sequence.

Return values

Every Kaleidoscope event handler function returns a value of type EventHandlerResult, an enum with several variants. In some handlers, Kaleidoscope ignores the return value, but for others, the result is used as a signal to control Kaleidoscope's behavior. In particular, some event handler hooks are "abortable". For those hooks, the return value of the plugin handlers are used to control what Kaleidoscope does after each plugin's event handler returns.

  • EventHandlerResult::OK is used to signal that Kaleidoscope should continue on to the next handler in the sequence.

  • EventHandlerResult::ABORT is used to signal that Kaleidoscope should not continue to call the other plugin handlers in the sequence, and stop processing the event entirely. This is used by some plugins to cancel events and/or delay them so that they occur at a later time, possibly with different values.

  • EventHandlerResult::EVENT_CONSUMED is used to signal that the plugin has successfully handled the event, and that there is nothing further to be done, so there is no point in continuing to call further plugin event handlers for the event.

Non-event "event" handlers

There are three special "event" handlers that are not called in response to input events, but are instead called at fixed points during Kaleidoscope's run time.

onSetup()

This handler is called when Kaleidoscope first starts. If a plugin needs to do some work after its constructor is called, but before Kaleidoscope enters its main loop and starts scanning for keyswitch events, it can do it in this function.

beforeEachCycle()

This handler gets called at the beginning of every keyswitch scan cycle, before the scan. It can be used by plugins to do things that need to be done repeatedly, regardless of any input from the user. Typically, this involves things like checking for timeouts.

afterEachCycle()

This is just like beforeEachCycle(), but gets called after the keyswitches have been scanned (and any input events handled).

Keyswitch input event handlers

This group of event handlers is triggered when keys on the keyboard are pressed and released. With one exception, they use a KeyEvent object as their one parameter. The KeyEvent class encapsulates the essential data about a key press (or release):

  • event.addr contains the KeyAddr of the key that toggled on or off.

  • event.state contains information about the current and former state of the key in the form of a uint8_t bitfield.

  • event.key contains the Key value of the event. For key presses, this is generally determined by means of a keymap lookup. For releases, the value is taken from the live_keys structure. Because the event is passed by reference, changing this value in a plugin handler will affect which value ends up in the live_keys array, and thus, the output of the keyboard.

  • event.id contains a KeyEventId value: an integer, usually monotonically increasing. This is useful as a tool to allow plugins to avoid re-processing the same event, thus avoiding infinite loops without resorting to an INJECTED key state flag which would cause other plugins to ignore events that they might otherwise be interested in.

onKeyswitchEvent(KeyEvent &event)

This handler is called in response to changes detected in the state of keyswitches, via the Runtime.handleKeyswitchEvent() function. After the keyswitches are scanned in each cycle, Kaleidoscope goes through them all and compares the state of each one to its previous state. For any of them that have either toggled on or off, plugins that define this function get called (until one of them returns either ABORT or EVENT_CONSUMED).

This handler should be defined by any plugin that is concerned only with physical keyswitch events, where the user has pressed or released a physical key. For example, plugins that determine key values based on the timing of these physical events should define this handler (for example, Qukeys and TapDance). Plugins that don't explicitly need to use this handler should define onKeyEvent() instead.

Plugins that use this handler should abide by certain rules in order to interact with each other to avoid infinite loops. A plugin might return ABORT to delay an event (until some other event or a timeout occurs), then later re-start processing of the same event by calling Runtime.handleKeyswitchEvent(). When it does this, it must take care to use the same KeyEventId value as that event's id parameter, and it should also take care to preserve the order of any such events. This way, plugins implementing onKeyswitchEvent() are able to keep track of event id numbers that they have already processed fully, and ignore those events when plugins later in the sequence re-start them.

In more specific detail, plugins that implement onKeyswitchEvent() must guarantee that the event.id values they emit when returning OK are monotonically increasing, and should only include id values that the plugin has already received as input. Additionally, such plugins must ignore any event with an id value that it has recently received and finished processing. The class KeyEventTracker can help simplify following these rules.

onKeyEvent(KeyEvent &event)

After a physical keyswitch event is processed by all of the plugins with onKeyswitchEvent() handlers (and they all return OK), Kaleidoscope passes that event on to the Runtime.handleKeyEvent() function, which calls plugins' onKeyEvent() handlers. This is also the starting point for events which do not correspond to physical key events, and can have an invalid event.addr value.

Plugins that need to respond to keyboard input, but which do not need to be closely tied to physical key events (and only those events) should use onKeyEvent() to do their work.

After all onKeyEvent() handlers have returned OK for an event, the live_keys state array gets updated. For a key press event, the final event.key value gets inserted into live_keys[event.addr]. From that point on, the keyboard will behave as though a key with that value is being held until that entry in live_keys is cleared (most likely as a result of a key release event's onKeyEvent() handlers returning OK). Thus, if an onKeyEvent() handler returns ABORT for a key release event, the keyboard will behave as though that key is still held after it has been released. This is what enables plugins like OneShot to function, but it also means that plugin authors need to take care about returning ABORT (but not EVENT_CONSUMED) from an onKeyEvent() handler, because it could result in "stuck" keys.

onKeyEvent() handlers should not store events and release them later (by calling Runtime.handleKeyEvent()), and must never call Runtime.handleKeyswitchEvent().

onAddToReport(Key key)

After the onKeyEvent() handlers have all returned OK, Kaleidoscope moves on to sending Keyboard HID reports. It clears the current report, and iterates through the live_keys array, looking for non-empty values, and adding them to the report. For System Control, Consumer Control, and Keyboard HID type Key values, Kaleidoscope handles adding the keycodes to the correct report, but it also calls this handler, in case a plugin needs to alter that report.

A return value of OK allows Kaleidoscope to proceed with adding the corresponding keycode(s) to the HID report, and ABORT causes it to leave and keycodes from key out of the report.

Note that this only applies to the Keyboard and Consumer Control HID reports, not the System Control report, which has different semantics, and only supports a single keycode at a time.

beforeReportingState(const KeyEvent &event)

This gets called right before a set of HID reports is sent. At this point, plugins have access to a (tentative) complete HID report, as well as the full state of all live keys on the keyboard. This is especially useful for plugins that might need to do things like remove keycodes (such as keyboard modifiers) from the forthcoming report just before it gets sent.

This event handler still has access to the event information for the event that triggered the report, but because it is passed as a const reference, it is no longer possible to change any of its values.

[Note: The older version of beforeReportingState() got called once per cycle, regardless of the pattern of keyswitches toggling on and off, and many plugins used it as a place to do things like check for timeouts. This new version does not get called every cycle, so when porting old code to the newer handlers, it's important to move any code that must be called every cycle to either beforeEachCycle() or afterEachCycle().]

[Also note: Unlike the deprecated beforeReportingState(), this one is abortable. That is, if it returns a result other than OK it will stop the subsequent handlers from getting called, and if it returns ABORT, it will also stop the report from being sent.]

afterReportingState(const KeyEvent &event)

This gets called after the HID report is sent. This handler allows a plugin to react to an event, but wait until after that event has been fully processed to do so. For example, the OneShot plugin releases keys that are in the "one-shot" state in response to key press events, but it does so after those triggering press events take place.

Other events

onLayerChange()

Called whenever one or more keymap layers are activated or deactivated (just after the change takes place).

onLEDModeChange()

Called by LEDControl whenever the active LED mode changes.

beforeSyncingLeds()

Called immediately before Kaleidoscope sends updated color values to the LEDs. This event handler is particularly useful to plugins that need to override the active LED mode (e.g. LED-ActiveModColor).

onFocusEvent()

onNameQuery()

exploreSketch()

Deprecated

Two existing "event" handlers have been deprecated. In the old version of Kaleidoscope's main loop, the keyboard's state information was stored in the keyscanner (which physical switches were on in the current and former scans), and in the HID reports. The Keyboard HID report would be cleared at the start of every cycle, and re-populated, on key at a time, calling every onKeyswitchEvent() handler for every active key. Then, once the tentative HID report was complete, the beforeReportingState() handlers would be called, and the complete report would be sent to the host. In most cycles, that report would be identical to the previous report, and would be suppressed.

The new system stores the keyboard's current state in the live_keys array instead, and only calls event handlers in response to keyswitch state changes (and artificially generated events), ultimately sending HID reports in response to events, rather than at the end of every cycle.

onKeyswitchEvent(Key &key, KeyAddr key_addr, uint8_t key_state)

This handler was called in every cycle, for every non-idle key. Its concept of an "event" included held keys that did not have a state change. These deprecated handlers are still called, in response to events and also when preparing the HID reports, but there is no longer a reasonable mechanism to call them in every cycle, for every active key, so some functionality could be lost.

It is strongly recommended to switch to using one of the two KeyEvent functions instead, depending on the needs of the plugin (either onKeyEvent() if it is fit for the purpose, or onKeyswitchEvent() if necessary). The onAddToReport() function might also be useful, particularly if the plugin in question uses special Key values not recognized by Kaleidoscope itself, but which should result in keycodes being added to HID reports.

beforeReportingState()

The old version of this handler has been deprecated, but it will still be called both before HID reports are sent and also once per cycle. It is likely that these handlers will continue to function, but the code therein should be moved either to the new KeyEvent version of beforeReportingState() and/or afterEachCycle() (or beforeEachCycle()), depending on whether it needs to be run only in response to input events or if it must execute every cycle, respectively.