928f02fdbd
shfmt
4 years ago
dd14951966
Remove DEFAULT_SKETCH
4 years ago
92a5b252f7
fix for not trying to query the arduino backend before we have a sketch
4 years ago
4dc3325e4b
fix a bunch of stuff that shellcheck hated
4 years ago
6c96f5f37b
clean up function deps a bit
4 years ago
4eb409b26d
inline a function that was only called in one place
4 years ago
438b9215ef
refactor a bit to reduce duplication in recipe names
4 years ago
c23c14ba75
Move bits of the config file that need arduino-cli to work into kaleidoscope-builder
4 years ago
c116800c2d
rename new timing sketch to match arduino sketch naming requirements
4 years ago
71b7f3523b
pull tools and compiler paths from the arduino toolchain
4 years ago
37a88797f5
switch find-bootloader-path over to using arduino prefs, killing our last internal use of BOARD_HARDWARE_PATH
4 years ago
1ae46ddc69
rework the single sketch search path to use the current directory name as a hint to the sketch name if it's not specified
4 years ago
91753fe259
when we don't need to rebuild the code, don't rebuild it
4 years ago
30157d651b
remove commented code
4 years ago
810eaa3fef
move the explanation of cli parsing close to the actual code
4 years ago
068e975acb
We only used md5sum for a diag message. So kill the dep
4 years ago
340f16dc17
refactor to extract a couple config methods
4 years ago
0823b816fd
remove "SOURCEDIR", a generic env variable we only used to mean pwd, right after setting it
4 years ago
d3161c003e
Clean up logic for choosing where our arduino-cli comes from
4 years ago
ee362308d8
Fixing some of our interim back-compat for old makefiles
4 years ago
941ab0f7d6
Get rid of MCU variable
4 years ago
2ba10574d4
Simplify defaulting of ARCH and FQBN
4 years ago
809f367b32
update ARDUINO_VERBOSE
4 years ago
16a78137a2
Remove unused AVR_GCC_PREFIX
4 years ago
f9c523ac0f
misc shellcheck fixes
4 years ago
fea85506ec
lift find_device_pid_vid to builder
4 years ago
1f227a0d72
move get-arduino-pref out of the config file
4 years ago
3c7a1312c1
Revert "remove obsolete? build-all target"
...
still need it for testing
This reverts commit 237d01df9e28c51bdccb3e1e123e3662d66dcdda.
4 years ago
bb9de38354
remove obsolete? build-all target
4 years ago
651d0bc5b4
remove obsolete compile-all target
4 years ago
c6ff455c12
did I break the compiler path prop?
4 years ago
54ee067758
Don't try to set BOARD_HARDWARE_PATH inside run-docker
4 years ago
c375b8bf3f
remove a debugging echo
4 years ago
f7995a6d9b
Remove local_LIBS which I believe to be obsolete
4 years ago
64b989660c
turn ccache back on
4 years ago
57a076b5e3
switch getting prefs to use arduino-cli instead of arudino-builder
4 years ago
f74b87e2de
first pass at something that will actually run simulator tests, at least in docker
4 years ago
ea0a0c3dd6
try a hacky workaround for the fact that arduino-cli doesn't seem to let us put doublequotes in build-props
4 years ago
1b7ff0793b
ARDUINO_CFLAGS is, as far as I can tell, historical
4 years ago
60ac839eb4
try another compiler.cpp.extra_flags line
4 years ago
bb3465d102
do a better job of mirrroing our older config
4 years ago
bca9ec9625
add debugging output for test
4 years ago
bc66579214
don't force reinstall of our kaleidoscope core
4 years ago
b3fed574d9
turn off default verbose in builder
4 years ago
3bf986a8ab
slightly closer to building with -cli
4 years ago
493a10b16e
switch which to command to make shellcheck happy
4 years ago
912118e3c1
Start to be able to use the system arduino cli
4 years ago
0b99c52178
don't package up arduino-cli when trying to run in docker
4 years ago
f8c297d19b
Revert "remove a pair of obsolete make targets"
...
This reverts commit d33d61d5029d03ceb20e37a7930d694e04bcf720.
4 years ago
a93361486b
remove build-all from docs
4 years ago
98851c0728
move more of make clean out into the makefile, leaving the "make clean" target in builder so it works for sketches
4 years ago
2104f4db78
remove a pair of obsolete make targets
4 years ago
4c421277a7
make a comment in run-docker shellcheck friendlier
4 years ago
b70b851321
Teach docker-run to run interactively or to be able to run from a non-interactive process like a git hook
...
Fixes #959
4 years ago
26f4ef498a
Set BOARD_HARDWARE_PATH correctly for run-docker on macOS
...
Because ARDUINO_LOCAL_LIB_PATH was being set to a default value for other
operating systems before checking the OS version, it would never get set
correctly for macOS (unless it was already set externally). This change fixes
that problem so that it's no longer necessary to set BOARD_HARDWARE_PATH
externally when executing `run-docker`.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
4 years ago
5c0edd9b69
"make clean" needs to clear out build and output paths
...
It previously did not. Also, try -not- to clean out google test if the build dir doesn't even exist
4 years ago
de45646c9d
extract out a variable for ARDUINO_BUILDER_TOOLS_PATH to make it easier to
...
get up and running on arch
4 years ago
34b428c4a9
Simplify conditional building
4 years ago
5bea41f630
reduce a bit of code duplication
4 years ago
6e8d1d020a
Switch to a less verbose way to set defaults for environment variables
...
By reducing duplication, we improve readability and reduce errors
4 years ago
a91c6a556e
refactor config file list to all be in one place
4 years ago
25c8a8a180
Refactor the "SKETCH" environment variable and friends.
...
Functionality should be the same, but code should be clearer.
4 years ago
e96902a9df
Switch from locally defining a "DIR" for every bin, to setting a global Kaleidoscope bin directory var
4 years ago
660747c916
Rename ROOT to KALEIDOSCOPE_DIR, which is what it appears to actually be.
4 years ago
ea0abc8833
inline a single-use cunction
4 years ago
19f728ca56
lift find_bootloader_path' out of the config file into the program.
...
as it isn't something that's platform specific
'
4 years ago
52a5265b9b
ROOT is defined automatically and not overridable. Remove the lines in the comments and docs
4 years ago
12e59b8684
lift up BUILD_FILE_PATH to somewhere reusable.
4 years ago
45bafe9bf5
SOURCEDIR was not actually used or honored. It was always set to pwd
4 years ago
dfadd32400
Removeo outdated and unused 'LIBRARY' env variable
4 years ago
a278efc21e
Absolute path to sized elf
4 years ago
afc8388cd1
Move a bunch of makefile targets from the generic sketch makefile
4 years ago
383a29d3e3
move run-tests out to the Makefile
4 years ago
bbc84f6f33
move build-gtest-gmock into the Makefile
4 years ago
1865e33426
Lift duplication of command to a var
4 years ago
ba7b496af5
Rework our Docker config for performance
...
* never try to write anything to the host's disks
* read as little as possible from the host's disks
* keep source in ram
* cache build artifacts and intermediate content persistently
Most of these hacks are only necessary because Docker disk performance on macOS is...not performant
Signed-off-by: Jesse Vincent <jesse@keyboard.io>
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
4 years ago
08bb9c5a14
Our previous conditional building was really wrong. It never built if any .hex existed.
...
This new version is still wrong, but less so. It at least checks the timestamp on the sketch
Signed-off-by: Jesse Vincent <jesse@keyboard.io>
4 years ago
d7a45afdb5
Update the timestamp setting script ti make shellcheck happy
4 years ago
6d00c6d7af
add "prepare-ccache" as a tool for travis
...
also bullet-proof setting up ccache against parallelization race conditions
4 years ago
5774054d61
try to make shellcheck happy
4 years ago
1b804a6d0f
make the timestmap-editor executable
4 years ago
919f7753ff
We no longer need this, since we do it above. (But also, this was always a repeated call)
4 years ago
d4a14fa7c9
expose the function that finds all the buildable sketches as "find_all_sketches"
4 years ago
6bf70a2fdc
Don't strip out the path from the sketch before we can make use of it
4 years ago
e378f9cd17
Switch find_sketch to set an env variable, rather than return a value, to reduce the number of times we need to call it. Also, begin to add better support for:
...
kaleidoscope-builder examples/Foo/Bar compile
4 years ago
beb963d341
Add a tool to be able to set file timestamps to git commit dates.
...
This will eventually be used to help improve arduino caching behavior
4 years ago
8150eec669
Switch from naming our cache directories based on inode to naming them based on the absolute path, so we don't blow the cache 100% of the time on travis
4 years ago
b9bca2cf7f
remove a bit of unused info from the compilation step reporting
4 years ago
fad1b7e051
Add a googletest-based test harness & tests
...
This adds a googletest-based test harness (with googletest pulled into
`testing/googletest`, so we have a fixed state of it), and a few test
cases that demonstrate its use.
Original work by Eric Paniagua in #898 , with minor cleanups by Gergely
Nagy.
Signed-off-by: Eric Paniagua <epaniagua@google.com>
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
4 years ago
57814671a5
kaleidoscope-builder: Support building lib-only variants of the sketch
...
Originally by Eric Paniagua <epaniagua@google.com>.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
4 years ago
352a3fe547
kaleidoscope-builder: Allow overriding CXX, CC, AR, etc
...
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
4 years ago
fff5dce199
kaleidoscope-builder: Whitespace cleanup
...
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
4 years ago
0f7ff140fc
docker: Simplify the Dockerfile a little
...
We can pass arguments to the entrypoint from the `docker run` commandline, so we
do not need to do that via an environment variable. This way, we're an
environment variable and an `eval` shorter.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
4 years ago
c743befb7f
Add a small tool, to run things within Docker
...
To make it easier to reproduce things, and to help build in a clean environment,
this adds a thin Dockerfile that has Arduino and arduino-cli pre-installed, and
- along with the `bin/run-docker` script - is set up so that one can easily run
arbitrary commands in the context of the current bundle and Kaleidoscope.
The first run will take a while, because docker will build the image. Subsequent
runs will use the cache.
To use: `bin/run-docker make`, for example. Any argument passed to the
`bin/run-docker` will be eval-ed within the container, and will run there.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
4 years ago
63fa886d9b
symlink generation for hex file with bootloader wasn't quite right. It added an extra output path
4 years ago
bbcdff6f67
Update the udev rules to tag devices as uaccess and seat
...
In order to be able to access the devices as the at-seat user, without having to
fiddle with distro-specific permissions and groups, we need to tag it both
`uaccess` and `seat`, and have the rule sorted before the one that applies
permissions based on these tags. As such, the file had to be renamed as well.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
4 years ago
66df8e9477
Rename the find-duplicate-cpp-files too to find-filename-conflicts
...
The new filename describes better what the tool does. Also adjusted the message
it writes, too.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
5 years ago
f0334dcaa8
Add a small tool to find conflicting filenames
...
When building Kaleidoscope, the compiled object files are linked together into a
static archive. This static archive has a very simple structure, and only stores
filenames, not paths, not even relative ones. As such, we can't have files with
the same name, because they will conflict, and one will override the other.
To avoid this situation, this script will find all cpp source files (we don't
need to care about header-only things, those do not result in an object file),
and will comb through them to find conflicting filenames.
If a conflict is found, it will print all files that share the name, and will
exit with an error at the end. It does not exit at the first duplicate, but will
find and print all of them.
If no conflict is found, the script just prints its status message and exits
with zero.
This addresses the bulk of #850 .
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
5 years ago
43526c4d92
Slightly updated probing logic based on Jason's code.
...
Signed-off-by: Jesse Vincent <jesse@keyboard.io>
5 years ago
430b159913
Tweak location-based detection logic
...
Signed-off-by: Jesse Vincent <jesse@keyboard.io>
5 years ago
Jesse Vincent
Michael Richters
Gergely Nagy
Eric Paniagua
Jason Koh