This key makes any held key (or otherwise active key, most likely OneShot keys)
sticky when it toggles on.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This is a special OneShot key that makes any subsequently-pressed key sticky,
regardless of its value.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This adds a new feature to OneShot: it can now (optionally) treat
modifiers and layer-shift keys as automatic OneShot keys, with
functions to enable and disable this feature for modifiers and
layer-shifts independently.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
Deprecates OneShot direct-access configuration variables, and replaces them with
setter functions:
- `time_out` => `setTimeout()`
- `hold_time_out` => `setHoldTimeout()`
- `double_tap_time_out` => `setDoubleTapTimeout()`
Deprecating public member variables is tricky, but possible. I've created new,
private member variables, and added code to keep them in sync with the
deprecated public ones for now.
Also of note: The old `OneShot.inject()` function should now be unnecessary for
most purposes. It still works, but has a potential undesirable side effect. It
now needs to pick a physical keyswitch address to use for the injected OneShot
key, and that key will not be usable for its normal value until that OneShot key
is deactivated. Because of this, use of `inject()` is not strongly discouraged.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This is a complete rewrite of OneShot, based on the keymap cache
redesign. This allows OneShot to abort the release of a key, causing
its cache entry to stay valid if it's in an active state after the key
is released, allowing us to fix#896 (double-tapping a layer shift key
doesn't make it sticky).
Instead of tracking `Key` values, OneShot now uses two bitfields of
the keyboard in order to track the OneShot state of every valid
`KeyAddr` independently. This could enable the creation of a OneShot
"meta" key, which could be used as a way to make any key on the
keyboard exhibit OneShot behaviour.
The new OneShot plugin immediately replaces the OneShot `Key` value
with its corresponding "normal" key, and activates its OneShot status
by setting one bit in one of the bitfields.
Also included:
* A rewrite of LED-ActiveModColor that makes it compatible
with the new OneShot, and add support for Qukeys
* Updates to Escape-OneShot for compatibility and efficiency
* Minor updates to Qukeys
* The new KeyAddrBitfield class
KeyAddrBitfield:
This class can be used to represent a binary state of the physical key
addresses on the keyboard. For example, ActiveModColor can use to to
mark all the keys which should be highlighted at any given time. It
includes a very efficient iterator, which returns only `KeyAddr`
values corresponding to bits that are set in the bitfield. It checks a
whole byte at a time before examining individual bits, so if most bits
are unset most of the time, it's very fast, and suitable for use in
hooks that get called every cycle.
ActiveModColor:
This makes LED-ActiveModColor compatible with Qukeys, and removes its
16-modifier limit, while simultaneously reducing it's footprint in RAM
and eliminating a potential buffer overrun bug where it could have
written past the end of its state array.
Fixes#882Fixes#894Fixes#896
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
It's now being used by more than one plugin, and is likely to get used by at
least a third, if not more.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
Because the active key for redial was getting cached as the key being pressed,
Redial would only ever see a key toggled on event for `Key_Redial`. It would
then set `redial_held_` to `true`, but it would never get set to `false` on the
key's release.
This change both fixes it and simplifies the plugin as it is adapted to the
keyboard state array by doing away with unnecessary state variables, including
`redial_held_`.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This is an extensive rewrite, but I think it simplifies the logic and makes the
plugin's code easier to follow.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This is a major rewrite of TapDance, taking advantage of the keyboard state
array and the `KeyAddrEventQueue` class originally written for Qukeys.
fixes#806fixes#922fixes#908fixes#985
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
When Qukeys stops event processing from its `onKeyswitchEvent()` handler, it's
because the event should be treated as non-existent (in most cases, it's merely
delayed). This keeps the keyboard state array from getting updated, as well as
completely stopping event processing.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This replaces the `Layer.live_composite_keymap_[]` cache with a representation
of the keyboard's current state as an array of `Key` objects, one per key on the
keyboard. In this new array, an idle key will have the value `Key_Transparent`,
and a pressed key will have the value of whatever key it's currently mapped to
in the keymap (or whatever value the active set of plugins has assigned to
it). A value of `Key_NoKey` will mask that key until it is released.
If a plugin returns `ABORT` from its `onKeyswitchEvent()` handler, that means
that the keymap cache should not be updated. It's especially important to have
this occur after plugins like OneShot and Qukeys, where the key can stay
active (or become active) after the physical keyswitch has been released.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This will allow plugin handlers to send one of three different signals to the
calling hook functions, with three different interpretations:
`OK`: Continue calling the next handler.
`EVENT_CONSUMED`: Don't proceed to the next handler, but signal to the hook
function's caller that an event was handled successfully.
`ABORT`: Stop processing, and signal to the hook function's caller that the
event should be ignored.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
Instead of only aborting hook functions if a handler returns `EVENT_CONSUMED`,
only continue abortable hooks if a handler returns `OK`. For existing core
plugins, this shouldn't make any difference because none of them use the `ERROR`
return value.
Also rename `shouldAbortOnConsumedEvent` to better match the new conditional.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This testcase checks to make sure that the keyboard state array gets cleared by
`handleKeyswitchEvent()` when a plugin returns `EVENT_CONSUMED`.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This adds a testcase for rollover from a TapDance key to the key that interrupts
the sequence, and a testcase for a TapDance key that times out while held.
I also adjusted the timing of the existing testcases to match the new version of
TapDance.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This testcase checks for any changes to existing values in Kaleidoscope-Ranges,
with the goal of preventing backwards-incompatible changes that will affect
existing EEPROM keymaps configured via Chrysalis.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This makes it possible for a testcase to include source files from plugin
directories. When the plugins got pulled out of the main Kaleidoscope source
dir, plugin header files became unavailable to testcases, but these files are
useful in some instances.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This replaces the magic number `24576` with the old definition of the start of
the Macros plugin's `Key` range, to make it clear that it will match bitwise
tests for "not a plugin key" (the two high bits are both zeros) and the
`SYNTHETIC` flags bit.
I also elaborated on the reasons for keeping the existing `Key` values stable
and added a comment addressing the more likely case where new values are being
added, rather than fighting the last war and focusing only on the one legacy
plugin range that exists outside the canonical plugin range, whose values have
already been incorporated here.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
Some headers in the file Model01Side.h were included inside the namespace
`kaleidoscope::driver::keyboardio` instead of being left in the global
namespace, where they should have been.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This implements a new `FocusSerial` command: `plugins`. The `plugins` command
will reply back with a list of plugins enabled in the firmware. The list is not
exhaustive, only plugins that opt-in to this mechanism will be listed. It is
opt-in, because for a lot of plugins, having them listed isn't useful in a
practical sense.
The goal with this feature is to allow Chrysalis to detect plugins that would
affect what keys it offers, or which additional settings it displays, and do so
in a consistent way. This is why IdleLEDs has an `onNameQuery` handler too, even
though it can be detected otherwise: for consistency.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
The option `--build-properties` was deprecated in v0.14.0 of arduino-cli. This
change uses the new option `--build-property` instead if the version of
arduino-cli being called is newer than that, thus avoiding deprecation warning
messages and innoculating the build system against the removal of the deprecated
version of the option.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
Michael Richters
Jesse Vincent
Gergely Nagy
Gergely Nagy