Remove the "Kaleidoscope-" prefix from the titles of plugin docs

docs/plugins/Colormap.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Colormap
+# Colormap
 
 The `Colormap` extension provides an easier way to set up a different - static -
 color map per-layer. This means that we can set up a map of colors for each key,

docs/plugins/Cycle.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Cycle
+# Cycle
 
 If you ever wanted a key that works like keys on old cell phones, when you press
 a key and it cycles through a number of options in a sequence, then the cycling

docs/plugins/CycleTimeReport.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-CycleTimeReport
+# CycleTimeReport
 
 A development and debugging aid, this plugin will measure average mainloop times
 (in microseconds) and print it to `Serial` periodically. While not the most

docs/plugins/DynamicMacros.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-DynamicMacros
+# DynamicMacros
 
 Dynamic macros are similar to [Macros][plugin:macros], but unlike them, they can
 be re-defined without compiling and flashing new firmware: one can change

docs/plugins/DynamicTapDance.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-DynamicTapDance
+# DynamicTapDance
 
 The `DynamicTapDance` plugin allows one to set up [TapDance][plugin:tapdance] keys
 without the need to compile and flash new firmware: one can change dynamic

docs/plugins/EEPROM-Keymap-Programmer.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-EEPROM-Keymap-Programmer
+# EEPROM-Keymap-Programmer
 
 Inspired by a similar feature on other keyboards, the `EEPROM-Keymap-Programmer`
 plugin implements an on-device keymap re-arrangement / re-coding system. There

docs/plugins/EEPROM-Keymap.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-EEPROM-Keymap
+# EEPROM-Keymap
 
 While keyboards usually ship with a keymap programmed in, to be able to change that keymap, without flashing new firmware, we need a way to place the keymap into a place we can update at run-time, and which persists across reboots. Fortunately, we have a bit of `EEPROM` on the keyboard, and can use it to store either the full keymap (and saving space in the firmware then), or store additional layers there.
 

docs/plugins/EEPROM-Settings.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-EEPROM-Settings
+# EEPROM-Settings
 
 To be able to reliably store persistent configuration in `EEPROM`, we need to be
 able to split up the available space for plugins to use. We also want to make

docs/plugins/Escape-OneShot.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Escape-OneShot
+# Escape-OneShot
 
 Turn the `Esc` key into a special key, that can cancel any active `OneShot`
 effect - or act as the normal `Esc` key if none are active, or if any of them

docs/plugins/FingerPainter.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-FingerPainter
+# FingerPainter
 
 The `FingerPainter` plugin provides an elaborate `LED` mode, in which one's able
 to paint with their fingers: when edit mode is toggled on, keys will - instead

docs/plugins/FirmwareDump.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-FirmwareDump
+# FirmwareDump
 
 This plugin provides a single Focus command: `firmware.dump`, which dumps the
 firmware's executable code. One might rightfully wonder what purpose this serves

docs/plugins/FocusSerial.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-FocusSerial
+# FocusSerial
 
 Bidirectional communication for Kaleidoscope. With this plugin enabled, plugins that implement the `onFocusEvent` hook will start responding to Focus commands sent via `Serial`, allowing bidirectional communication between firmware and host.
 

docs/plugins/GhostInTheFirmware.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-GhostInTheFirmware
+# GhostInTheFirmware
 
 Born out of the desire to demo LED effects on the keyboard without having to
 touch it by hand (which would obstruct the video), the `GhostInTheFirmware`

docs/plugins/Heatmap.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Heatmap
+# Heatmap
 
 The `Heatmap` plugin provides a LED effect, that displays a heatmap on the
 keyboard. The LEDs under each key will have a color according to how much use

docs/plugins/HostOS.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-HostOS
+# HostOS
 
 The `HostOS` extension is not all that useful in itself, rather, it is a
 building block other plugins and extensions can use to not repeat the same

docs/plugins/HostPowerManagement.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-HostPowerManagement
+# HostPowerManagement
 
 Support performing custom actions whenever the host suspends, resumes, or is
 sleeping.

docs/plugins/IdleLEDs.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-IdleLEDs
+# IdleLEDs
 
 Having LED effects on the keyboard can be exceptionally helpful. However, having
 the effects - or lights, in general - on all the time, even when the keyboard is

docs/plugins/LED-ActiveLayerColor.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LED-ActiveLayerColor
+# LED-ActiveLayerColor
 
 A simple way to light up the keyboard in uniform colors, depending on what layer
 one's on. Unlike [Colormap](Colormap.md), all keys will be the same color. But

docs/plugins/LED-ActiveModColor.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LED-ActiveModColor
+# LED-ActiveModColor
 
 With this plugin, any active modifier on the keyboard will have the LED under it
 highlighted. No matter how the modifier got activated (a key press, a macro,

docs/plugins/LED-AlphaSquare.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LED-AlphaSquare
+# LED-AlphaSquare
 
 An alphabet for your per-key LEDs, `AlphaSquare` provides a way to display 4x4
 "pixel" symbols on your keyboard. With this building block, one can build some

docs/plugins/LED-Palette-Theme.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LED-Palette-Theme
+# LED-Palette-Theme
 
 A common base for plugins that want to provide themes, or theme-related
 capabilities, using a 16 color palette. In other words, this is for plugin

docs/plugins/LED-Stalker.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LED-Stalker
+# LED-Stalker
 
 The `StalkerEffect` plugin provides an interesting new typing experience: the
 LEDs light up as you tap keys and play one of the selected effects: a haunting

docs/plugins/LED-Wavepool.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LED-Wavepool
+# LED-Wavepool
 
 The `WavepoolEffect` plugin makes waves of light splash out from each keypress.
 When idle, it will also simulate gentle rainfall on the keyboard.

docs/plugins/LEDControl.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LEDControl
+# LEDControl
 
 This is a plugin for [Kaleidoscope][fw], for controlling the LEDs, and LED
 effects.

docs/plugins/LEDEffect-BootAnimation.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LEDEffect-BootAnimation
+# LEDEffect-BootAnimation
 
 With this plugin enabled, the keyboard will play a little boot animation when
 starting up (this animation does not inhibit typing, you can still use the

docs/plugins/LEDEffect-BootGreeting.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LEDEffect-BootGreeting
+# LEDEffect-BootGreeting
 
 If you want to have your keyboard signal when it turns on, but you don't want to
 use any more complicated LED modes, this plugin is for you. It will make the

docs/plugins/LEDEffect-Breathe.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LEDEffect-Breathe
+# LEDEffect-Breathe
 
 Provides a breathing effect for the keyboard. Breathe in, breathe out.
 

docs/plugins/LEDEffect-Chase.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LEDEffect-Chase
+# LEDEffect-Chase
 
 A simple LED effect where one color chases another across the keyboard and back,
 over and over again. Playful colors they are.

docs/plugins/LEDEffect-Rainbow.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LEDEffect-Rainbow
+# LEDEffect-Rainbow
 
 Two colorful rainbow effects are implemented by this plugin: one where the
 rainbow waves through the keys, and another where the LEDs breathe though the

docs/plugins/LEDEffect-SolidColor.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LEDEffect-SolidColor
+# LEDEffect-SolidColor
 
 This plugin provides tools to build LED effects that set the entire keyboard to
 a single color. For show, and for backlighting purposes.

docs/plugins/LEDEffects.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-LEDEffects
+# LEDEffects
 
 The `LEDEffects` plugin provides a selection of LED effects, each of them fairly
 simple, simple enough to not need a plugin of their own.

docs/plugins/Leader.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Leader
+# Leader
 
 Leader keys are a kind of key where when they are tapped, all following keys are
 swallowed, until the plugin finds a matching sequence in the dictionary, it

docs/plugins/Macros.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Macros
+# Macros
 
 Macros are a standard feature on many keyboards and Kaleidoscope-powered ones
 are no exceptions. Macros are a way to have a single key-press do a whole lot of

docs/plugins/MagicCombo.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-MagicCombo
+# MagicCombo
 
 The `MagicCombo` extension provides a way to perform custom actions when a
 particular set of keys are held down together. The functionality assigned to

docs/plugins/MouseKeys.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-MouseKeys
+# MouseKeys
 
 Have you ever wanted to control the mouse cursor from the comfort of your
 keyboard? With this plugin, you can. While it may not replace the mouse in all

docs/plugins/NumPad.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-NumPad
+# NumPad
 
 This is a plugin for [Kaleidoscope][fw], that adds a NumPad-specific LED
 effect and applies it when the numpad layer is active.

docs/plugins/OneShot.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-OneShot
+# OneShot
 
 One-shots are a new kind of behaviour for your standard modifier and momentary
 layer keys: instead of having to hold them while pressing other keys, they can

docs/plugins/Qukeys.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Qukeys
+# Qukeys
 
 ## Concept
 

docs/plugins/Ranges.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Ranges
+# Ranges
 
 ## kaleidoscope::ranges enum
 

docs/plugins/Redial.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Redial
+# Redial
 
 If you ever wanted to just repeat the last key pressed, no matter what it was,
 this plugin is made for you. It allows you to configure a key that will repeat

docs/plugins/ShapeShifter.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-ShapeShifter
+# ShapeShifter
 
 `ShapeShifter` is a plugin that makes it considerably easier to change what
 symbol is input when a key is pressed together with `Shift`. If one wants to

docs/plugins/SpaceCadet.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-SpaceCadet
+# SpaceCadet
 
 [Space Cadet][space-cadet] is a way to make it more convenient to input
 parens - those `(` and `)` things -, symbols that a lot of programming languages

docs/plugins/Steno.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Steno
+# Steno
 
 Stenography is a way to write in shorthand, a chorded input system that allows
 very fast input (considerably higher than normal touch typing), by using

docs/plugins/Syster.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Syster
+# Syster
 
 Syster is a way to input symbols in a different way: instead of macros, Leader
 sequences or the like, we trigger the special input mode, and enter the symbol's

docs/plugins/TapDance.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-TapDance
+# TapDance
 
 Tap-dance keys are general purpose, multi-use keys, which trigger a different
 action based on the number of times they were tapped in sequence. As an example

docs/plugins/TopsyTurvy.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-TopsyTurvy
+# TopsyTurvy
 
 `TopsyTurvy` is a plugin that inverts the behaviour of the `Shift` key for some
 selected keys. That is, if configured so, it will input `!` when pressing the

docs/plugins/TriColor.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-TriColor
+# TriColor
 
 The `TriColor` effect extension is a part of
 the [`LEDEffects`][plugin:ledeffects] library, not a stand-alone base library of

docs/plugins/Turbo.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Turbo
+# Turbo
 
 The `Turbo` plugin provides an extra key one can place on their keymap. While the
 key is pressed or toggled, pressing other keys will generate quick repeated

docs/plugins/TypingBreaks.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-TypingBreaks
+# TypingBreaks
 
 Typing on the keyboard for an extended period of time may lead to injuries,
 which is why it is highly recommended to take frequent breaks from the

docs/plugins/USB-Quirks.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-USB-Quirks
+# USB-Quirks
 
 USB-Quirks provides a few methods to deal with more obscure parts of the USB spec, such as changing between `Boot` and `Report` protocols. These are in a separate plugin, because these features are not part of the USB spec, and are often workarounds for various issues. See the provided methods for more information about what they're useful for.
 

docs/plugins/Unicode.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-Unicode
+# Unicode
 
 The `Unicode` extension makes it easier to write plugins that input Unicode
 symbols on the host. Because inputting Unicode varies from OS to OS, this helper

docs/plugins/WinKeyToggle.md

@@ -1,4 +1,4 @@
-# Kaleidoscope-WinKeyToggle
+# WinKeyToggle
 
 If you ever played games on Windows on a traditional keyboard, you likely ran
 into the issue of the Windows key: in the heat of the moment, you accidentally