softhruf/Splitography: Stop using opaque macros

Instead of using opaque macros which aren't even extensible, just expand them,
and use the raw data structures for the hardware definition. While this is more
verbose than the macros, it is more future proof, and clearer for the reader
too, because they don't need to understand the magic macros.

Signed-off-by: Gergely Nagy <algernon@keyboard.io>

src/kaleidoscope/device/softhruf/Splitography.cpp

@@ -1,6 +1,6 @@
 /* -*- mode: c++ -*-
  * Kaleidoscope-Hardware-SOFTHRUF-Splitography -- Splitography hardware support for Kaleidoscope
- * Copyright (C) 2018, 2019  Keyboard.io, Inc
+ * Copyright (C) 2018, 2019, 2020  Keyboard.io, Inc
  *
  * Based on QMK (commit e9a67f8fd) and sdothum's fork (commit 8616b44)
  *  (C) Jack Humbert, Jun Wako, Steven Hum, and others
@@ -28,15 +28,51 @@
 #include "kaleidoscope/Runtime.h"
 #include "kaleidoscope/driver/keyscanner/Base_Impl.h"
 
+// Here, we set up aliases to the device's KeyScanner and KeyScannerProps 
+// in the global namespace within the scope of this file. We'll use these
+// aliases to simplify some template initialization code below.
+using KeyScannerProps = typename kaleidoscope::device::softhruf::SplitographyProps::KeyScannerProps;
+using KeyScanner = typename kaleidoscope::device::softhruf::SplitographyProps::KeyScanner;
+
 namespace kaleidoscope {
 namespace device {
 namespace softhruf {
 
-ATMEGA_KEYSCANNER_BOILERPLATE
+// `KeyScannerProps` here refers to the alias set up above. We do not need to
+// prefix the `matrix_rows` and `matrix_columns` names within the array
+// declaration, because those are resolved within the context of the class, so
+// the `matrix_rows` in `KeyScannerProps::matrix_row_pins[matrix_rows]` gets
+// resolved as `KeyScannerProps::matrix_rows`.
+const uint8_t KeyScannerProps::matrix_rows;
+const uint8_t KeyScannerProps::matrix_columns;
+constexpr uint8_t KeyScannerProps::matrix_row_pins[matrix_rows];
+constexpr uint8_t KeyScannerProps::matrix_col_pins[matrix_columns];
 
+// Resolving is a bit different in case of templates, however: the name of the
+// array is resolved within the scope of the namespace and the class, but the
+// array size is not - because it is a template. Therefore, we need a fully
+// qualified name there - or an alias in the global scope, which we set up just
+// above.
+template<> uint16_t KeyScanner::previousKeyState_[KeyScannerProps::matrix_rows] = {};
+template<> uint16_t KeyScanner::keyState_[KeyScannerProps::matrix_rows] = {};
+template<> uint16_t KeyScanner::masks_[KeyScannerProps::matrix_rows] = {};
+template<> uint8_t KeyScanner::debounce_matrix_[KeyScannerProps::matrix_rows][KeyScannerProps::matrix_columns] = {};
+
+// We set up the TIMER1 interrupt vector here. Due to dependency reasons, this
+// cannot be in a header-only driver, and must be placed here.
+//
+// Timer1 is responsible for setting a property on the KeyScanner, which will
+// tell it to do a scan. We use this to make sure that scans happen at roughly
+// the intervals we want. We do the scan outside of the interrupt scope for
+// practical reasons: guarding every codepath against interrupts that can be
+// reached from the scan is far too tedious, for very little gain.
+ISR(TIMER1_OVF_vect) {
+  Runtime.device().keyScanner().do_scan_ = true;
 }
-}
-}
+
+} // namespace softhruf
+} // namespace device
+} // namespace kaleidoscope
 
 #endif
 #endif // ifndef KALEIDOSCOPE_VIRTUAL_BUILD

src/kaleidoscope/device/softhruf/Splitography.h

@@ -44,10 +44,13 @@ struct SplitographyProps : kaleidoscope::device::ATmega32U4KeyboardProps {
   };
   typedef kaleidoscope::driver::mcu::ATmega32U4<MCUProps> MCU;
   struct KeyScannerProps : public kaleidoscope::driver::keyscanner::ATmegaProps {
-    ATMEGA_KEYSCANNER_PROPS(
-      ROW_PIN_LIST({ PIN_D0, PIN_D1, PIN_D2, PIN_D3 }),
-      COL_PIN_LIST({ PIN_F0, PIN_F1, PIN_F4, PIN_F5, PIN_F6, PIN_F7, PIN_C7, PIN_C6, PIN_B6, PIN_B5, PIN_B4, PIN_D7 })
-    );
+    static constexpr uint8_t matrix_rows = 4;
+    static constexpr uint8_t matrix_columns = 12;
+    typedef MatrixAddr<matrix_rows, matrix_columns> KeyAddr;
+#ifndef KALEIDOSCOPE_VIRTUAL_BUILD
+    static constexpr uint8_t matrix_row_pins[matrix_rows] = {PIN_D0, PIN_D1, PIN_D2, PIN_D3};
+    static constexpr uint8_t matrix_col_pins[matrix_columns] = { PIN_F0, PIN_F1, PIN_F4, PIN_F5, PIN_F6, PIN_F7, PIN_C7, PIN_C6, PIN_B6, PIN_B5, PIN_B4, PIN_D7 };
+#endif // KALEIDOSCOPE_VIRTUAL_BUILD
   };
   typedef kaleidoscope::driver::keyscanner::ATmega<KeyScannerProps> KeyScanner;
   typedef kaleidoscope::driver::bootloader::avr::FLIP BootLoader;
@@ -55,8 +58,13 @@ struct SplitographyProps : kaleidoscope::device::ATmega32U4KeyboardProps {
 };
 
 #ifndef KALEIDOSCOPE_VIRTUAL_BUILD
-ATMEGA32U4_DEVICE(Splitography);
+class Splitography: public kaleidoscope::device::ATmega32U4Keyboard<SplitographyProps> {};
 #else // ifndef KALEIDOSCOPE_VIRTUAL_BUILD
+/* Device definition omitted for virtual device builds.
+ * We need to forward declare the device name, though, as there are
+ * some legacy extern references to boards whose definition
+ * depends on this.
+ */
 class Splitography;
 #endif // ifndef KALEIDOSCOPE_VIRTUAL_BUILD