Wakeup for USB host. First clean version

hardware/keyboardio/cores/keyboardio/USBAPI.h

@@ -18,6 +18,7 @@ public:
 	void attach();
 	void detach();	// Serial port goes down too...
 	void poll();
+	bool wakeupHost(); // returns false, when wakeup cannot be processed
 };
 extern USBDevice_ USBDevice;
 

hardware/keyboardio/cores/keyboardio/USBCore.cpp

@@ -92,6 +92,7 @@ const DeviceDescriptor USB_DeviceDescriptorA =
 //==================================================================
 
 volatile u8 _usbConfiguration = 0;
+volatile u8 _usbCurrentStatus = 0; // meaning of bits see usb_20.pdf, Figure 9-4. Information Returned by a GetStatus() Request to a Device
 
 static inline void WaitIN(void)
 {
@@ -527,16 +528,37 @@ ISR(USB_COM_vect)
 	{
 		//	Standard Requests
 		u8 r = setup.bRequest;
+		u16 wValue = setup.wValueL | (setup.wValueH << 8);
 		if (GET_STATUS == r)
 		{
-			Send8(0);		// TODO
+			if(requestType == (REQUEST_DEVICETOHOST | REQUEST_STANDARD | REQUEST_DEVICE))
+			{
+				Send8(_usbCurrentStatus);
+				Send8(0);
+			}
+			else
+			{
+				// TODO: handle the HALT state of an endpoint here
+				// see "Figure 9-6. Information Returned by a GetStatus() Request to an Endpoint" in usb_20.pdf for more information
+				Send8(0);
 				Send8(0);
 			}
+		}
 		else if (CLEAR_FEATURE == r)
 		{
+			if((requestType == (REQUEST_HOSTTODEVICE | REQUEST_STANDARD | REQUEST_DEVICE))
+				&& (wValue == DEVICE_REMOTE_WAKEUP))
+			{
+				_usbCurrentStatus &= ~FEATURE_REMOTE_WAKEUP_ENABLED;
+			}
 		}
 		else if (SET_FEATURE == r)
 		{
+			if((requestType == (REQUEST_HOSTTODEVICE | REQUEST_STANDARD | REQUEST_DEVICE))
+				&& (wValue == DEVICE_REMOTE_WAKEUP))
+			{
+				_usbCurrentStatus |= FEATURE_REMOTE_WAKEUP_ENABLED;
+			}
 		}
 		else if (SET_ADDRESS == r)
 		{
@@ -644,6 +666,7 @@ USBDevice_::USBDevice_()
 void USBDevice_::attach()
 {
 	_usbConfiguration = 0;
+	_usbCurrentStatus = 0;
 	UHWCON = 0x01;						// power internal reg
 	USBCON = (1<<USBE)|(1<<FRZCLK);		// clock frozen, usb enabled
 #if F_CPU == 16000000UL
@@ -681,4 +704,22 @@ void USBDevice_::poll()
 {
 }
 
+
+bool USBDevice_::wakeupHost()
+{
+	// clear any previous wakeup request which might have been set but could be processed at that time
+	// e.g. because the host was not suspended at that time
+	UDCON &= ~(1 << RMWKUP);
+
+	if(!(UDCON & (1 << RMWKUP)) && (_usbCurrentStatus & FEATURE_REMOTE_WAKEUP_ENABLED))
+	{
+		// This short version will only work, when the device has not been suspended. Currently the
+		// Arduino core doesn't handle SUSPEND at all, so this is ok.
+		UDCON |= (1 << RMWKUP); // send the wakeup request
+		return true;
+	}
+
+	return false;
+}
+
 #endif /* if defined(USBCON) */

hardware/keyboardio/cores/keyboardio/USBCore.h

@@ -79,6 +79,15 @@
 #define USB_INTERFACE_DESCRIPTOR_TYPE          4
 #define USB_ENDPOINT_DESCRIPTOR_TYPE           5
 
+// usb_20.pdf Table 9.6 Standard Feature Selectors
+#define DEVICE_REMOTE_WAKEUP                   1
+#define ENDPOINT_HALT                          2
+#define TEST_MODE                              3
+
+// usb_20.pdf Figure 9-4. Information Returned by a GetStatus() Request to a Device
+#define FEATURE_SELFPOWERED_ENABLED     (1 << 0)
+#define FEATURE_REMOTE_WAKEUP_ENABLED   (1 << 1)
+
 #define USB_DEVICE_CLASS_COMMUNICATIONS        0x02
 #define USB_DEVICE_CLASS_HUMAN_INTERFACE       0x03
 #define USB_DEVICE_CLASS_STORAGE               0x08
@@ -282,7 +291,7 @@ typedef struct
 	{ 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs }
 
 #define D_CONFIG(_totalLength,_interfaces) \
-	{ 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(500) }
+	{ 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED | USB_CONFIG_REMOTE_WAKEUP, USB_CONFIG_POWER_MA(500) }
 
 #define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \
 	{ 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 }