|
|
|
|
#pragma once
|
|
|
|
|
|
|
|
|
|
#include <Arduino.h>
|
|
|
|
|
#include "key_defs.h"
|
Cache the keymap when changing layers
Instead of going through all the active layers each time we are looking for a
key, whenever we switch layers, compute the effective keymap, and store the
indexes. This makes the lookup a considerably faster operation, and lookups
happen far more often than layer switching.
This comes at a cost of ROWS*COLS amount of memory, and a bit of code, but on
the flip side, the lookup operation is now O(1), which is a very nice property
to have, if you want responsiveness. Changing layers is marginally slower,
however, but even with 32 active layers, doing the computation once, instead of
potentially many dozens of time, is still worth it.
We could further reduce the memory requirements if we stored more columns per
byte, but that's for a future optimization.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
8 years ago
|
|
|
#include KALEIDOSCOPE_HARDWARE_H
|
|
|
|
|
|
|
|
|
|
// Macro for defining the keymap. This should be used in the sketch
|
|
|
|
|
// file (*.ino) to define the keymap[] array that holds the user's
|
|
|
|
|
// layers. It also computes the number of layers in that keymap.
|
|
|
|
|
#define KEYMAPS(layers...) \
|
|
|
|
|
const Key keymaps[][ROWS][COLS] PROGMEM = { layers }; \
|
|
|
|
|
uint8_t layer_count = sizeof(keymaps) / sizeof(*keymaps);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
class Layer_ {
|
|
|
|
|
public:
|
|
|
|
|
Layer_(void);
|
|
|
|
|
|
layers: Implement a two-stage cache
With the new implementation, there are two lookup functions, because we have two
caches, and different parts of the firmware will want to use either this or
that (or perhaps both, in rare cases).
First of all, we use caches because looking up a key through all the layers
is costy, and the cost increases dramatically the more layers we have.
Then, we have the `effectiveKeymapCache`, because to have layer behaviours
we want, that is, if you hold a key on a layer, release the layer key but
continue holding the other, we want for the layered keycode to continue
repeating. At the same time, we want other keys to not be affected by the
now-turned-off layer. So we update the keycode in the cache on-demand, when
the key is pressed or released. (see the top of `handleKeyswitchEvent`).
On the other hand, we also have plugins that scan the whole keymap, and do
things based on that information, such as highlighting keys that changed
between layers. These need to be able to look at a state of where the
keymap *should* be, not necessarily where it is. The `effectiveKeymapCache`
is not useful here. So we use a `keymapCache` which we update whenever
layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
show how the keymap should look, without the `effectiveKeymapCache`-induced
behaviour.
Thus, if we are curious about what a given key will do, use `lookup`. If we
are curious what the active layer state describes the key as, use
`lookupUncached`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
7 years ago
|
|
|
/* There are two lookup functions, because we have two caches, and different
|
|
|
|
|
* parts of the firmware will want to use either this or that (or perhaps
|
|
|
|
|
* both, in rare cases).
|
|
|
|
|
*
|
|
|
|
|
* First of all, we use caches because looking up a key through all the layers
|
|
|
|
|
* is costy, and the cost increases dramatically the more layers we have.
|
|
|
|
|
*
|
|
|
|
|
* Then, we have the `liveCompositeKeymap`, because to have layer behaviours
|
layers: Implement a two-stage cache
With the new implementation, there are two lookup functions, because we have two
caches, and different parts of the firmware will want to use either this or
that (or perhaps both, in rare cases).
First of all, we use caches because looking up a key through all the layers
is costy, and the cost increases dramatically the more layers we have.
Then, we have the `effectiveKeymapCache`, because to have layer behaviours
we want, that is, if you hold a key on a layer, release the layer key but
continue holding the other, we want for the layered keycode to continue
repeating. At the same time, we want other keys to not be affected by the
now-turned-off layer. So we update the keycode in the cache on-demand, when
the key is pressed or released. (see the top of `handleKeyswitchEvent`).
On the other hand, we also have plugins that scan the whole keymap, and do
things based on that information, such as highlighting keys that changed
between layers. These need to be able to look at a state of where the
keymap *should* be, not necessarily where it is. The `effectiveKeymapCache`
is not useful here. So we use a `keymapCache` which we update whenever
layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
show how the keymap should look, without the `effectiveKeymapCache`-induced
behaviour.
Thus, if we are curious about what a given key will do, use `lookup`. If we
are curious what the active layer state describes the key as, use
`lookupUncached`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
7 years ago
|
|
|
* we want, that is, if you hold a key on a layer, release the layer key but
|
|
|
|
|
* continue holding the other, we want for the layered keycode to continue
|
|
|
|
|
* repeating.
|
|
|
|
|
*
|
|
|
|
|
* At the same time, we want other keys to not be affected by the
|
layers: Implement a two-stage cache
With the new implementation, there are two lookup functions, because we have two
caches, and different parts of the firmware will want to use either this or
that (or perhaps both, in rare cases).
First of all, we use caches because looking up a key through all the layers
is costy, and the cost increases dramatically the more layers we have.
Then, we have the `effectiveKeymapCache`, because to have layer behaviours
we want, that is, if you hold a key on a layer, release the layer key but
continue holding the other, we want for the layered keycode to continue
repeating. At the same time, we want other keys to not be affected by the
now-turned-off layer. So we update the keycode in the cache on-demand, when
the key is pressed or released. (see the top of `handleKeyswitchEvent`).
On the other hand, we also have plugins that scan the whole keymap, and do
things based on that information, such as highlighting keys that changed
between layers. These need to be able to look at a state of where the
keymap *should* be, not necessarily where it is. The `effectiveKeymapCache`
is not useful here. So we use a `keymapCache` which we update whenever
layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
show how the keymap should look, without the `effectiveKeymapCache`-induced
behaviour.
Thus, if we are curious about what a given key will do, use `lookup`. If we
are curious what the active layer state describes the key as, use
`lookupUncached`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
7 years ago
|
|
|
* now-turned-off layer. So we update the keycode in the cache on-demand, when
|
|
|
|
|
* the key is pressed. (see the top of `handleKeyswitchEvent`).
|
layers: Implement a two-stage cache
With the new implementation, there are two lookup functions, because we have two
caches, and different parts of the firmware will want to use either this or
that (or perhaps both, in rare cases).
First of all, we use caches because looking up a key through all the layers
is costy, and the cost increases dramatically the more layers we have.
Then, we have the `effectiveKeymapCache`, because to have layer behaviours
we want, that is, if you hold a key on a layer, release the layer key but
continue holding the other, we want for the layered keycode to continue
repeating. At the same time, we want other keys to not be affected by the
now-turned-off layer. So we update the keycode in the cache on-demand, when
the key is pressed or released. (see the top of `handleKeyswitchEvent`).
On the other hand, we also have plugins that scan the whole keymap, and do
things based on that information, such as highlighting keys that changed
between layers. These need to be able to look at a state of where the
keymap *should* be, not necessarily where it is. The `effectiveKeymapCache`
is not useful here. So we use a `keymapCache` which we update whenever
layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
show how the keymap should look, without the `effectiveKeymapCache`-induced
behaviour.
Thus, if we are curious about what a given key will do, use `lookup`. If we
are curious what the active layer state describes the key as, use
`lookupUncached`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
7 years ago
|
|
|
*
|
|
|
|
|
* On the other hand, we also have plugins that scan the whole keymap, and do
|
|
|
|
|
* things based on that information, such as highlighting keys that changed
|
|
|
|
|
* between layers. These need to be able to look at a state of where the
|
|
|
|
|
* keymap *should* be, not necessarily where it is. The `liveCompositeKeymap`
|
|
|
|
|
* is not useful here. So we use `activeLayers` which we update whenever
|
layers: Implement a two-stage cache
With the new implementation, there are two lookup functions, because we have two
caches, and different parts of the firmware will want to use either this or
that (or perhaps both, in rare cases).
First of all, we use caches because looking up a key through all the layers
is costy, and the cost increases dramatically the more layers we have.
Then, we have the `effectiveKeymapCache`, because to have layer behaviours
we want, that is, if you hold a key on a layer, release the layer key but
continue holding the other, we want for the layered keycode to continue
repeating. At the same time, we want other keys to not be affected by the
now-turned-off layer. So we update the keycode in the cache on-demand, when
the key is pressed or released. (see the top of `handleKeyswitchEvent`).
On the other hand, we also have plugins that scan the whole keymap, and do
things based on that information, such as highlighting keys that changed
between layers. These need to be able to look at a state of where the
keymap *should* be, not necessarily where it is. The `effectiveKeymapCache`
is not useful here. So we use a `keymapCache` which we update whenever
layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
show how the keymap should look, without the `effectiveKeymapCache`-induced
behaviour.
Thus, if we are curious about what a given key will do, use `lookup`. If we
are curious what the active layer state describes the key as, use
`lookupUncached`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
7 years ago
|
|
|
* layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
|
|
|
|
|
* show how the keymap should look, without the `liveCompositeKeymap`-induced
|
layers: Implement a two-stage cache
With the new implementation, there are two lookup functions, because we have two
caches, and different parts of the firmware will want to use either this or
that (or perhaps both, in rare cases).
First of all, we use caches because looking up a key through all the layers
is costy, and the cost increases dramatically the more layers we have.
Then, we have the `effectiveKeymapCache`, because to have layer behaviours
we want, that is, if you hold a key on a layer, release the layer key but
continue holding the other, we want for the layered keycode to continue
repeating. At the same time, we want other keys to not be affected by the
now-turned-off layer. So we update the keycode in the cache on-demand, when
the key is pressed or released. (see the top of `handleKeyswitchEvent`).
On the other hand, we also have plugins that scan the whole keymap, and do
things based on that information, such as highlighting keys that changed
between layers. These need to be able to look at a state of where the
keymap *should* be, not necessarily where it is. The `effectiveKeymapCache`
is not useful here. So we use a `keymapCache` which we update whenever
layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
show how the keymap should look, without the `effectiveKeymapCache`-induced
behaviour.
Thus, if we are curious about what a given key will do, use `lookup`. If we
are curious what the active layer state describes the key as, use
`lookupUncached`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
7 years ago
|
|
|
* behaviour.
|
|
|
|
|
*
|
|
|
|
|
* Thus, if we are curious about what a given key will do, use `lookup`. If we
|
|
|
|
|
* are curious what the active layer state describes the key as, use
|
|
|
|
|
* `lookupOnActiveLayer`.
|
layers: Implement a two-stage cache
With the new implementation, there are two lookup functions, because we have two
caches, and different parts of the firmware will want to use either this or
that (or perhaps both, in rare cases).
First of all, we use caches because looking up a key through all the layers
is costy, and the cost increases dramatically the more layers we have.
Then, we have the `effectiveKeymapCache`, because to have layer behaviours
we want, that is, if you hold a key on a layer, release the layer key but
continue holding the other, we want for the layered keycode to continue
repeating. At the same time, we want other keys to not be affected by the
now-turned-off layer. So we update the keycode in the cache on-demand, when
the key is pressed or released. (see the top of `handleKeyswitchEvent`).
On the other hand, we also have plugins that scan the whole keymap, and do
things based on that information, such as highlighting keys that changed
between layers. These need to be able to look at a state of where the
keymap *should* be, not necessarily where it is. The `effectiveKeymapCache`
is not useful here. So we use a `keymapCache` which we update whenever
layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
show how the keymap should look, without the `effectiveKeymapCache`-induced
behaviour.
Thus, if we are curious about what a given key will do, use `lookup`. If we
are curious what the active layer state describes the key as, use
`lookupUncached`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
7 years ago
|
|
|
*/
|
|
|
|
|
static Key lookup(byte row, byte col) {
|
|
|
|
|
return liveCompositeKeymap[row][col];
|
|
|
|
|
}
|
|
|
|
|
static Key lookupOnActiveLayer(byte row, byte col) {
|
|
|
|
|
uint8_t layer = activeLayers[row][col];
|
layers: Implement a two-stage cache
With the new implementation, there are two lookup functions, because we have two
caches, and different parts of the firmware will want to use either this or
that (or perhaps both, in rare cases).
First of all, we use caches because looking up a key through all the layers
is costy, and the cost increases dramatically the more layers we have.
Then, we have the `effectiveKeymapCache`, because to have layer behaviours
we want, that is, if you hold a key on a layer, release the layer key but
continue holding the other, we want for the layered keycode to continue
repeating. At the same time, we want other keys to not be affected by the
now-turned-off layer. So we update the keycode in the cache on-demand, when
the key is pressed or released. (see the top of `handleKeyswitchEvent`).
On the other hand, we also have plugins that scan the whole keymap, and do
things based on that information, such as highlighting keys that changed
between layers. These need to be able to look at a state of where the
keymap *should* be, not necessarily where it is. The `effectiveKeymapCache`
is not useful here. So we use a `keymapCache` which we update whenever
layers change (see `Layer.on` and `Layer.off`), and it updates the cache to
show how the keymap should look, without the `effectiveKeymapCache`-induced
behaviour.
Thus, if we are curious about what a given key will do, use `lookup`. If we
are curious what the active layer state describes the key as, use
`lookupUncached`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
7 years ago
|
|
|
return (*getKey)(layer, row, col);
|
|
|
|
|
}
|
|
|
|
|
static void on(uint8_t layer);
|
|
|
|
|
static void off(uint8_t layer);
|
|
|
|
|
static void move(uint8_t layer);
|
|
|
|
|
|
|
|
|
|
static uint8_t top(void) {
|
|
|
|
|
return highestLayer;
|
|
|
|
|
}
|
|
|
|
|
static void next(void);
|
|
|
|
|
static void previous(void);
|
|
|
|
|
|
|
|
|
|
static boolean isOn(uint8_t layer);
|
|
|
|
|
|
|
|
|
|
static void defaultLayer(uint8_t layer);
|
|
|
|
|
static uint8_t defaultLayer(void);
|
|
|
|
|
|
|
|
|
|
static uint32_t getLayerState(void);
|
|
|
|
|
|
|
|
|
|
static Key eventHandler(Key mappedKey, byte row, byte col, uint8_t keyState);
|
|
|
|
|
|
|
|
|
|
static Key(*getKey)(uint8_t layer, byte row, byte col);
|
|
|
|
|
|
|
|
|
|
static Key getKeyFromPROGMEM(uint8_t layer, byte row, byte col);
|
|
|
|
|
|
|
|
|
|
static void updateLiveCompositeKeymap(byte row, byte col);
|
|
|
|
|
static void updateActiveLayers(void);
|
|
|
|
|
|
|
|
|
|
private:
|
|
|
|
|
static void updateHighestLayer(void);
|
|
|
|
|
|
|
|
|
|
static uint8_t highestLayer;
|
|
|
|
|
static Key liveCompositeKeymap[ROWS][COLS];
|
|
|
|
|
static uint8_t activeLayers[ROWS][COLS];
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
extern Layer_ Layer;
|
