You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
244 lines
6.8 KiB
244 lines
6.8 KiB
|
|
|
|
/* Copyright (c) 2011, Peter Barrett
|
|
**
|
|
** Permission to use, copy, modify, and/or distribute this software for
|
|
** any purpose with or without fee is hereby granted, provided that the
|
|
** above copyright notice and this permission notice appear in all copies.
|
|
**
|
|
** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL
|
|
** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED
|
|
** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR
|
|
** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES
|
|
** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
|
|
** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
|
|
** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
|
|
** SOFTWARE.
|
|
*/
|
|
|
|
#include "Platform.h"
|
|
#include "USBAPI.h"
|
|
#include <avr/wdt.h>
|
|
|
|
#if defined(USBCON)
|
|
#ifdef CDC_ENABLED
|
|
|
|
#if (RAMEND < 1000)
|
|
#define SERIAL_BUFFER_SIZE 16
|
|
#else
|
|
#define SERIAL_BUFFER_SIZE 64
|
|
#endif
|
|
|
|
struct ring_buffer
|
|
{
|
|
unsigned char buffer[SERIAL_BUFFER_SIZE];
|
|
volatile int head;
|
|
volatile int tail;
|
|
};
|
|
|
|
ring_buffer cdc_rx_buffer = { { 0 }, 0, 0};
|
|
|
|
typedef struct
|
|
{
|
|
u32 dwDTERate;
|
|
u8 bCharFormat;
|
|
u8 bParityType;
|
|
u8 bDataBits;
|
|
u8 lineState;
|
|
} LineInfo;
|
|
|
|
static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 };
|
|
|
|
#define WEAK __attribute__ ((weak))
|
|
|
|
extern const CDCDescriptor _cdcInterface PROGMEM;
|
|
const CDCDescriptor _cdcInterface =
|
|
{
|
|
D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1),
|
|
|
|
// CDC communication interface
|
|
D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0),
|
|
D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd)
|
|
D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not)
|
|
D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported
|
|
D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0
|
|
D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40),
|
|
|
|
// CDC data interface
|
|
D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0),
|
|
D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0),
|
|
D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0)
|
|
};
|
|
|
|
int WEAK CDC_GetInterface(u8* interfaceNum)
|
|
{
|
|
interfaceNum[0] += 2; // uses 2
|
|
return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface));
|
|
}
|
|
|
|
bool WEAK CDC_Setup(Setup& setup)
|
|
{
|
|
u8 r = setup.bRequest;
|
|
u8 requestType = setup.bmRequestType;
|
|
|
|
if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType)
|
|
{
|
|
if (CDC_GET_LINE_CODING == r)
|
|
{
|
|
USB_SendControl(0,(void*)&_usbLineInfo,7);
|
|
return true;
|
|
}
|
|
}
|
|
|
|
if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType)
|
|
{
|
|
if (CDC_SET_LINE_CODING == r)
|
|
{
|
|
USB_RecvControl((void*)&_usbLineInfo,7);
|
|
return true;
|
|
}
|
|
|
|
if (CDC_SET_CONTROL_LINE_STATE == r)
|
|
{
|
|
_usbLineInfo.lineState = setup.wValueL;
|
|
|
|
// auto-reset into the bootloader is triggered when the port, already
|
|
// open at 1200 bps, is closed. this is the signal to start the watchdog
|
|
// with a relatively long period so it can finish housekeeping tasks
|
|
// like servicing endpoints before the sketch ends
|
|
if (1200 == _usbLineInfo.dwDTERate) {
|
|
// We check DTR state to determine if host port is open (bit 0 of lineState).
|
|
if ((_usbLineInfo.lineState & 0x01) == 0) {
|
|
*(uint16_t *)0x0800 = 0x7777;
|
|
wdt_enable(WDTO_120MS);
|
|
} else {
|
|
// Most OSs do some intermediate steps when configuring ports and DTR can
|
|
// twiggle more than once before stabilizing.
|
|
// To avoid spurious resets we set the watchdog to 250ms and eventually
|
|
// cancel if DTR goes back high.
|
|
|
|
wdt_disable();
|
|
wdt_reset();
|
|
*(uint16_t *)0x0800 = 0x0;
|
|
}
|
|
}
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
|
|
int _serialPeek = -1;
|
|
void Serial_::begin(unsigned long baud_count)
|
|
{
|
|
}
|
|
|
|
void Serial_::begin(unsigned long baud_count, byte config)
|
|
{
|
|
}
|
|
|
|
void Serial_::end(void)
|
|
{
|
|
}
|
|
|
|
void Serial_::accept(void)
|
|
{
|
|
ring_buffer *buffer = &cdc_rx_buffer;
|
|
int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE;
|
|
|
|
// if we should be storing the received character into the location
|
|
// just before the tail (meaning that the head would advance to the
|
|
// current location of the tail), we're about to overflow the buffer
|
|
// and so we don't write the character or advance the head.
|
|
|
|
// while we have room to store a byte
|
|
while (i != buffer->tail) {
|
|
int c = USB_Recv(CDC_RX);
|
|
if (c == -1)
|
|
break; // no more data
|
|
buffer->buffer[buffer->head] = c;
|
|
buffer->head = i;
|
|
|
|
i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE;
|
|
}
|
|
}
|
|
|
|
int Serial_::available(void)
|
|
{
|
|
ring_buffer *buffer = &cdc_rx_buffer;
|
|
return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE;
|
|
}
|
|
|
|
int Serial_::peek(void)
|
|
{
|
|
ring_buffer *buffer = &cdc_rx_buffer;
|
|
if (buffer->head == buffer->tail) {
|
|
return -1;
|
|
} else {
|
|
return buffer->buffer[buffer->tail];
|
|
}
|
|
}
|
|
|
|
int Serial_::read(void)
|
|
{
|
|
ring_buffer *buffer = &cdc_rx_buffer;
|
|
// if the head isn't ahead of the tail, we don't have any characters
|
|
if (buffer->head == buffer->tail) {
|
|
return -1;
|
|
} else {
|
|
unsigned char c = buffer->buffer[buffer->tail];
|
|
buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE;
|
|
return c;
|
|
}
|
|
}
|
|
|
|
void Serial_::flush(void)
|
|
{
|
|
USB_Flush(CDC_TX);
|
|
}
|
|
|
|
size_t Serial_::write(uint8_t c)
|
|
{
|
|
/* only try to send bytes if the high-level CDC connection itself
|
|
is open (not just the pipe) - the OS should set lineState when the port
|
|
is opened and clear lineState when the port is closed.
|
|
bytes sent before the user opens the connection or after
|
|
the connection is closed are lost - just like with a UART. */
|
|
|
|
// TODO - ZE - check behavior on different OSes and test what happens if an
|
|
// open connection isn't broken cleanly (cable is yanked out, host dies
|
|
// or locks up, or host virtual serial port hangs)
|
|
if (_usbLineInfo.lineState > 0) {
|
|
int r = USB_Send(CDC_TX,&c,1);
|
|
if (r > 0) {
|
|
return r;
|
|
} else {
|
|
setWriteError();
|
|
return 0;
|
|
}
|
|
}
|
|
setWriteError();
|
|
return 0;
|
|
}
|
|
|
|
// This operator is a convenient way for a sketch to check whether the
|
|
// port has actually been configured and opened by the host (as opposed
|
|
// to just being connected to the host). It can be used, for example, in
|
|
// setup() before printing to ensure that an application on the host is
|
|
// actually ready to receive and display the data.
|
|
// We add a short delay before returning to fix a bug observed by Federico
|
|
// where the port is configured (lineState != 0) but not quite opened.
|
|
Serial_::operator bool() {
|
|
bool result = false;
|
|
if (_usbLineInfo.lineState > 0)
|
|
result = true;
|
|
delay(10);
|
|
return result;
|
|
}
|
|
|
|
Serial_ Serial;
|
|
|
|
#endif
|
|
#endif /* if defined(USBCON) */
|