You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Kaleidoscope/KeyboardioFirmware.ino

362 lines
9.6 KiB

// Copyright 2015 Keyboardio, inc. <jesse@keyboard.io>
// See "LICENSE" for license details
#define DEBUG_SERIAL false
/**
* TODO:
add mouse inertia
add series-of-character macros
add series of keystroke macros
use a lower-level USB API
*/
#include "KeyboardioFirmware.h"
#include <EEPROM.h> // Don't need this for CLI compilation, but do need it in the IDE
#include <Wire.h>
#include "KeyboardioSX1509.h"
#include "HID-Project.h"
const byte LEFT_SX1509_ADDRESS = 0x70; // SX1509 I2C address (10)
const byte RIGHT_SX1509_ADDRESS = 0x71; // SX1509 I2C address (11)
sx1509Class leftsx1509(LEFT_SX1509_ADDRESS);
sx1509Class rightsx1509(RIGHT_SX1509_ADDRESS);
int right_initted = 0;
int left_initted = 0;
#define TS(X) //Serial.print(micros() );Serial.print("\t");Serial.println(X);
void setup_matrix() {
//blank out the matrix.
for (byte col = 0; col < COLS; col++) {
for (byte row = 0; row < ROWS; row++) {
matrixState[row][col] = 0;
}
}
}
void set_keymap(Key keymapEntry, byte matrixStateEntry) {
if (keymapEntry.flags & SWITCH_TO_KEYMAP) {
// this logic sucks. there is a better way TODO this
if (! (keymapEntry.flags ^ ( MOMENTARY | SWITCH_TO_KEYMAP))) {
if (key_toggled_on(matrixStateEntry)) {
if ( keymapEntry.rawKey == KEYMAP_NEXT) {
temporary_keymap++;
} else if ( keymapEntry.rawKey == KEYMAP_PREVIOUS) {
temporary_keymap--;
} else {
temporary_keymap = keymapEntry.rawKey;
}
}
if (key_toggled_off(matrixStateEntry)) {
temporary_keymap = primary_keymap;
}
} else if (! (keymapEntry.flags ^ ( SWITCH_TO_KEYMAP))) {
// switch keymap and stay there
if (key_toggled_on(matrixStateEntry)) {
temporary_keymap = primary_keymap = keymapEntry.rawKey;
save_primary_keymap(primary_keymap);
}
}
}
}
void scan_matrix() {
x = 0;
y = 0;
//scan the Keyboard matrix looking for connections
for (byte row = 0; row < LEFT_ROWS; row++) {
TS("Scanning row ")
if (left_initted) {
leftsx1509.updatePinState(left_rowpins[row], LOW);
leftsx1509.sendPinStates();
leftsx1509.fetchPinStates();
}
if (right_initted) {
rightsx1509.updatePinState(right_rowpins[row], LOW);
rightsx1509.sendPinStates();
rightsx1509.fetchPinStates();
}
for (byte col = 0; col < LEFT_COLS; col++) {
TS("Scanning col")
//If we see an electrical connection on I->J,
matrixState[row][col] <<= 1;
matrixState[row][(COLS - 1) - col] <<= 1;
TS("Reading left pin")
if (left_initted && leftsx1509.readPrefetchedPin(left_colpins[col])) {
matrixState[row][col] |= 0;
} else {
matrixState[row][col] |= 1;
}
TS("Reading right pin")
if (right_initted && rightsx1509.readPrefetchedPin(right_colpins[col])) {
matrixState[row][(COLS - 1) - col] |= 0;
} else {
matrixState[row][(COLS - 1) - col] |= 1;
}
// while we're inspecting the electrical matrix, we look
// to see if the Key being held is a firmware level
// metakey, so we can act on it, lest we only discover
// that we should be looking at a seconary Keymap halfway
// through the matrix scan
TS("calling send_key_event")
send_key_event(row, col);
if (right_initted)
send_key_event(row, (COLS - 1) - col);
}
TS("clearing output pins")
if (left_initted)
leftsx1509.updatePinState(left_rowpins[row], HIGH);
if (right_initted)
rightsx1509.updatePinState(right_rowpins[row], HIGH);
}
TS("Sending key report");
Keyboard.sendReport();
Keyboard.releaseAll();
handle_mouse_movement(x, y);
}
// Command mode
//
void reboot_bootloader() {
// Set the magic bits to get a Caterina-based device
// to reboot into the bootloader and stay there, rather
// than run move onward
//
// These values are the same as those defined in
// Caterina.c
uint16_t bootKey = 0x7777;
uint16_t *const bootKeyPtr = (uint16_t *)0x0800;
// Stash the magic key
*bootKeyPtr = bootKey;
// Set a watchdog timer
wdt_enable(WDTO_120MS);
while (1) {} // This infinite loop ensures nothing else
// happens before the watchdog reboots us
}
void setup() {
wdt_disable();
Serial.begin(115200);
//usbMaxPower = 100;
Keyboard.begin();
Mouse.begin();
setup_leds();
led_bootup();
setup_matrix();
setup_pins();
rightsx1509.fetchPinStates();
temporary_keymap = primary_keymap = load_primary_keymap();
}
String myApp;
void loop() {
// if(Serial.available()) {
// myApp = Serial.readString();
// myApp.trim();
// }
TS("A noop takes...")
TS("about to scan the matrix")
scan_matrix();
TS("updating LEDs");
update_leds(temporary_keymap == NUMPAD_KEYMAP);
}
void save_primary_keymap(byte keymap) {
EEPROM.write(EEPROM_KEYMAP_LOCATION, keymap);
}
byte load_primary_keymap() {
byte keymap = EEPROM.read(EEPROM_KEYMAP_LOCATION);
if (keymap >= KEYMAPS ) {
return 0; // undefined positions get saved as 255
}
return 0; // return keymap;
}
// Sending events to the usb host
void handle_synthetic_key_press(byte switchState, Key mappedKey) {
if (mappedKey.flags & IS_MOUSE_KEY ) {
if (mappedKey.rawKey & MOUSE_WARP) {
if (key_toggled_on(switchState)) {
warp_mouse(mappedKey);
}
} else {
handle_mouse_key_press(switchState, mappedKey, x, y);
}
}
if (mappedKey.flags & IS_CONSUMER) {
if (key_toggled_on (switchState)) {
ConsumerControl.press(mappedKey.rawKey);
}
}
else if (mappedKey.flags & IS_INTERNAL) {
if (key_toggled_on (switchState)) {
if (mappedKey.rawKey == LED_TOGGLE) {
next_led_mode();
}
}
} else if (mappedKey.flags & IS_SYSCTL) {
if (key_toggled_on (switchState)) {
SystemControl.press(mappedKey.rawKey);
}
} else if (mappedKey.flags & IS_MACRO) {
if (key_toggled_on (switchState)) {
if (mappedKey.rawKey == 1) {
Serial.print("Keyboard.IO keyboard driver v0.00");
}
}
} else if (mappedKey.rawKey == KEY_MOUSE_BTN_L
|| mappedKey.rawKey == KEY_MOUSE_BTN_M
|| mappedKey.rawKey == KEY_MOUSE_BTN_R) {
if (key_toggled_on (switchState)) {
Mouse.press(mappedKey.rawKey);
end_warping();
} else if (key_is_pressed(switchState)) {
} else if (Mouse.isPressed(mappedKey.rawKey) ) {
Mouse.release(mappedKey.rawKey);
}
}
}
void send_key_event(byte row, byte col) {
//for every newly pressed button, figure out what logical key it is and send a key down event
// for every newly released button, figure out what logical key it is and send a key up event
// TODO:switch to sending raw HID packets
// really, these are signed small ints
byte switchState = matrixState[row][col];
Key mappedKey = keymaps[temporary_keymap][row][col];
set_keymap(keymaps[primary_keymap][row][col], switchState);
if (mappedKey.flags & SYNTHETIC_KEY) {
handle_synthetic_key_press(switchState, mappedKey);
} else {
if (key_is_pressed(switchState)) {
press_key(mappedKey);
}
}
}
void press_key(Key mappedKey) {
if (mappedKey.flags & SHIFT_HELD) {
Keyboard.press(Key_LShift.rawKey);
}
Keyboard.press(mappedKey.rawKey);
}
void make_input(sx1509Class sx1509, int pin) {
sx1509.pinDir(pin, INPUT); // Set SX1509 pin 1 as an input
sx1509.writePin(pin, HIGH); // Activate pull-up
}
void make_output(sx1509Class sx1509, int pin) {
sx1509.pinDir(pin, OUTPUT);
sx1509.writePin(pin, HIGH);
}
void setup_pins() {
right_initted = setup_sx1509(rightsx1509, right_colpins, right_rowpins);
left_initted = setup_sx1509(leftsx1509, left_colpins, left_rowpins);
}
int setup_sx1509 (sx1509Class sx1509, int colpins[], int rowpins[]) {
byte initted;
for (int counter = 0; counter < 10; counter++) {
initted = sx1509.init();
if (initted)
break;
}
if (initted) { // init ok
// In order to use the keypad, the clock must first be
// configured. We can call configureClock() with the default
// parameters (2MHz internal oscillator, no clock in/out).
sx1509.configClock();
// the debounceConfig function sets the debounce time. This
// function's parameter should be a 3-bit value.
// 0: 0.5ms * 2MHz/fOSC
// 1: 1ms * 2MHz/fOSC
// 2: 2ms * 2MHz/fOSC
// 3: 4ms * 2MHz/fOSC
// 4: 8ms * 2MHz/fOSC
// 5: 16ms * 2MHz/fOSC
// 6: 32ms * 2MHz/fOSC
// 7: 64ms * 2MHz/fOSC
sx1509.debounceConfig(4); // maximum debuonce time
for (int i = 0; i < LEFT_ROWS; i++) {
make_output(sx1509, rowpins[i]);
}
for (int j = 0; j < LEFT_COLS; j++) {
make_input(sx1509, colpins[j]);
sx1509.debounceEnable(colpins[j]);
}
}
return initted;
}