You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
670 lines
24 KiB
670 lines
24 KiB
// -*- mode: c++ -*-
|
|
// Copyright 2016-2022 Keyboardio, inc. <jesse@keyboard.io>
|
|
// See "LICENSE" for license details
|
|
|
|
#ifndef BUILD_INFORMATION
|
|
#define BUILD_INFORMATION "locally built on " __DATE__ " at " __TIME__
|
|
#endif
|
|
|
|
|
|
/**
|
|
* These #include directives pull in the Kaleidoscope firmware core,
|
|
* as well as the Kaleidoscope plugins we use in the Model 100's firmware
|
|
*/
|
|
|
|
|
|
// The Kaleidoscope core
|
|
#include "Kaleidoscope.h"
|
|
|
|
// Support for storing the keymap in EEPROM
|
|
#include "Kaleidoscope-EEPROM-Settings.h"
|
|
#include "Kaleidoscope-EEPROM-Keymap.h"
|
|
|
|
// Support for communicating with the host via a simple Serial protocol
|
|
#include "Kaleidoscope-FocusSerial.h"
|
|
|
|
// Support for keys that move the mouse
|
|
#include "Kaleidoscope-MouseKeys.h"
|
|
|
|
// Support for macros
|
|
#include "Kaleidoscope-Macros.h"
|
|
|
|
// Support for controlling the keyboard's LEDs
|
|
#include "Kaleidoscope-LEDControl.h"
|
|
|
|
// Support for the "Boot greeting" effect, which pulses the 'LED' button for 10s
|
|
// when the keyboard is connected to a computer (or that computer is powered on)
|
|
#include "Kaleidoscope-LEDEffect-BootGreeting.h"
|
|
|
|
// Support for LED modes that set all LEDs to a single color
|
|
#include "Kaleidoscope-LEDEffect-SolidColor.h"
|
|
|
|
// Support for an LED mode that makes all the LEDs 'breathe'
|
|
#include "Kaleidoscope-LEDEffect-Breathe.h"
|
|
|
|
// Support for an LED mode that makes a red pixel chase a blue pixel across the keyboard
|
|
#include "Kaleidoscope-LEDEffect-Chase.h"
|
|
|
|
// Support for LED modes that pulse the keyboard's LED in a rainbow pattern
|
|
#include "Kaleidoscope-LEDEffect-Rainbow.h"
|
|
|
|
// Support for an LED mode that lights up the keys as you press them
|
|
#include "Kaleidoscope-LED-Stalker.h"
|
|
|
|
// Support for an LED mode that prints the keys you press in letters 4px high
|
|
#include "Kaleidoscope-LED-AlphaSquare.h"
|
|
|
|
// Support for shared palettes for other plugins, like Colormap below
|
|
#include "Kaleidoscope-LED-Palette-Theme.h"
|
|
|
|
// Support for an LED mode that lets one configure per-layer color maps
|
|
#include "Kaleidoscope-Colormap.h"
|
|
|
|
// Support for turning the LEDs off after a certain amount of time
|
|
#include "Kaleidoscope-IdleLEDs.h"
|
|
|
|
// Support for setting a default LED mode
|
|
#include "Kaleidoscope-DefaultLEDModeConfig.h"
|
|
|
|
// Support for Keyboardio's internal keyboard testing mode
|
|
#include "Kaleidoscope-HardwareTestMode.h"
|
|
|
|
// Support for host power management (suspend & wakeup)
|
|
#include "Kaleidoscope-HostPowerManagement.h"
|
|
|
|
// Support for magic combos (key chords that trigger an action)
|
|
#include "Kaleidoscope-MagicCombo.h"
|
|
|
|
// Support for USB quirks, like changing the key state report protocol
|
|
#include "Kaleidoscope-USB-Quirks.h"
|
|
|
|
// Support for secondary actions on keys
|
|
#include "Kaleidoscope-Qukeys.h"
|
|
|
|
// Support for one-shot modifiers and layer keys
|
|
#include "Kaleidoscope-OneShot.h"
|
|
#include "Kaleidoscope-Escape-OneShot.h"
|
|
|
|
// Support for dynamic, Chrysalis-editable macros
|
|
#include "Kaleidoscope-DynamicMacros.h"
|
|
|
|
/** This 'enum' is a list of all the macros used by the Model 100's firmware
|
|
* The names aren't particularly important. What is important is that each
|
|
* is unique.
|
|
*
|
|
* These are the names of your macros. They'll be used in two places.
|
|
* The first is in your keymap definitions. There, you'll use the syntax
|
|
* `M(MACRO_NAME)` to mark a specific keymap position as triggering `MACRO_NAME`
|
|
*
|
|
* The second usage is in the 'switch' statement in the `macroAction` function.
|
|
* That switch statement actually runs the code associated with a macro when
|
|
* a macro key is pressed.
|
|
*/
|
|
|
|
enum {
|
|
MACRO_VERSION_INFO,
|
|
MACRO_ANY,
|
|
};
|
|
|
|
|
|
/** The Model 100's key layouts are defined as 'keymaps'. By default, there are three
|
|
* keymaps: The standard QWERTY keymap, the "Function layer" keymap and the "Numpad"
|
|
* keymap.
|
|
*
|
|
* Each keymap is defined as a list using the 'KEYMAP_STACKED' macro, built
|
|
* of first the left hand's layout, followed by the right hand's layout.
|
|
*
|
|
* Keymaps typically consist mostly of `Key_` definitions. There are many, many keys
|
|
* defined as part of the USB HID Keyboard specification. You can find the names
|
|
* (if not yet the explanations) for all the standard `Key_` defintions offered by
|
|
* Kaleidoscope in these files:
|
|
* https://github.com/keyboardio/Kaleidoscope/blob/master/src/kaleidoscope/key_defs/keyboard.h
|
|
* https://github.com/keyboardio/Kaleidoscope/blob/master/src/kaleidoscope/key_defs/consumerctl.h
|
|
* https://github.com/keyboardio/Kaleidoscope/blob/master/src/kaleidoscope/key_defs/sysctl.h
|
|
* https://github.com/keyboardio/Kaleidoscope/blob/master/src/kaleidoscope/key_defs/keymaps.h
|
|
*
|
|
* Additional things that should be documented here include
|
|
* using ___ to let keypresses fall through to the previously active layer
|
|
* using XXX to mark a keyswitch as 'blocked' on this layer
|
|
* using ShiftToLayer() and LockLayer() keys to change the active keymap.
|
|
* keeping NUM and FN consistent and accessible on all layers
|
|
*
|
|
* The PROG key is special, since it is how you indicate to the board that you
|
|
* want to flash the firmware. However, it can be remapped to a regular key.
|
|
* When the keyboard boots, it first looks to see whether the PROG key is held
|
|
* down; if it is, it simply awaits further flashing instructions. If it is
|
|
* not, it continues loading the rest of the firmware and the keyboard
|
|
* functions normally, with whatever binding you have set to PROG. More detail
|
|
* here: https://community.keyboard.io/t/how-the-prog-key-gets-you-into-the-bootloader/506/8
|
|
*
|
|
* The "keymaps" data structure is a list of the keymaps compiled into the firmware.
|
|
* The order of keymaps in the list is important, as the ShiftToLayer(#) and LockLayer(#)
|
|
* macros switch to key layers based on this list.
|
|
*
|
|
*
|
|
|
|
* A key defined as 'ShiftToLayer(FUNCTION)' will switch to FUNCTION while held.
|
|
* Similarly, a key defined as 'LockLayer(NUMPAD)' will switch to NUMPAD when tapped.
|
|
*/
|
|
|
|
/**
|
|
* Layers are "0-indexed" -- That is the first one is layer 0. The second one is layer 1.
|
|
* The third one is layer 2.
|
|
* This 'enum' lets us use names like QWERTY, FUNCTION, and NUMPAD in place of
|
|
* the numbers 0, 1 and 2.
|
|
*
|
|
*/
|
|
|
|
enum {
|
|
PRIMARY,
|
|
NUMPAD,
|
|
FUNCTION,
|
|
}; // layers
|
|
|
|
|
|
/**
|
|
* To change your keyboard's layout from QWERTY to DVORAK or COLEMAK, comment out the line
|
|
*
|
|
* #define PRIMARY_KEYMAP_QWERTY
|
|
*
|
|
* by changing it to
|
|
*
|
|
* // #define PRIMARY_KEYMAP_QWERTY
|
|
*
|
|
* Then uncomment the line corresponding to the layout you want to use.
|
|
*
|
|
*/
|
|
|
|
#define PRIMARY_KEYMAP_QWERTY
|
|
// #define PRIMARY_KEYMAP_DVORAK
|
|
// #define PRIMARY_KEYMAP_COLEMAK
|
|
// #define PRIMARY_KEYMAP_CUSTOM
|
|
|
|
|
|
/* This comment temporarily turns off astyle's indent enforcement
|
|
* so we can make the keymaps actually resemble the physical key layout better
|
|
*/
|
|
// clang-format off
|
|
|
|
KEYMAPS(
|
|
|
|
#if defined (PRIMARY_KEYMAP_QWERTY)
|
|
[PRIMARY] = KEYMAP_STACKED
|
|
(___, Key_1, Key_2, Key_3, Key_4, Key_5, Key_LEDEffectNext,
|
|
Key_Backtick, Key_Q, Key_W, Key_E, Key_R, Key_T, Key_Tab,
|
|
Key_PageUp, Key_A, Key_S, Key_D, Key_F, Key_G,
|
|
Key_PageDown, Key_Z, Key_X, Key_C, Key_V, Key_B, Key_Escape,
|
|
Key_LeftControl, Key_Backspace, Key_LeftGui, Key_LeftShift,
|
|
ShiftToLayer(FUNCTION),
|
|
|
|
M(MACRO_ANY), Key_6, Key_7, Key_8, Key_9, Key_0, LockLayer(NUMPAD),
|
|
Key_Enter, Key_Y, Key_U, Key_I, Key_O, Key_P, Key_Equals,
|
|
Key_H, Key_J, Key_K, Key_L, Key_Semicolon, Key_Quote,
|
|
Key_RightAlt, Key_N, Key_M, Key_Comma, Key_Period, Key_Slash, Key_Minus,
|
|
Key_RightShift, Key_LeftAlt, Key_Spacebar, Key_RightControl,
|
|
ShiftToLayer(FUNCTION)),
|
|
|
|
#elif defined (PRIMARY_KEYMAP_DVORAK)
|
|
|
|
[PRIMARY] = KEYMAP_STACKED
|
|
(___, Key_1, Key_2, Key_3, Key_4, Key_5, Key_LEDEffectNext,
|
|
Key_Backtick, Key_Quote, Key_Comma, Key_Period, Key_P, Key_Y, Key_Tab,
|
|
Key_PageUp, Key_A, Key_O, Key_E, Key_U, Key_I,
|
|
Key_PageDown, Key_Semicolon, Key_Q, Key_J, Key_K, Key_X, Key_Escape,
|
|
Key_LeftControl, Key_Backspace, Key_LeftGui, Key_LeftShift,
|
|
ShiftToLayer(FUNCTION),
|
|
|
|
M(MACRO_ANY), Key_6, Key_7, Key_8, Key_9, Key_0, LockLayer(NUMPAD),
|
|
Key_Enter, Key_F, Key_G, Key_C, Key_R, Key_L, Key_Slash,
|
|
Key_D, Key_H, Key_T, Key_N, Key_S, Key_Minus,
|
|
Key_RightAlt, Key_B, Key_M, Key_W, Key_V, Key_Z, Key_Equals,
|
|
Key_RightShift, Key_LeftAlt, Key_Spacebar, Key_RightControl,
|
|
ShiftToLayer(FUNCTION)),
|
|
|
|
#elif defined (PRIMARY_KEYMAP_COLEMAK)
|
|
|
|
[PRIMARY] = KEYMAP_STACKED
|
|
(___, Key_1, Key_2, Key_3, Key_4, Key_5, Key_LEDEffectNext,
|
|
Key_Backtick, Key_Q, Key_W, Key_F, Key_P, Key_G, Key_Tab,
|
|
Key_PageUp, Key_A, Key_R, Key_S, Key_T, Key_D,
|
|
Key_PageDown, Key_Z, Key_X, Key_C, Key_V, Key_B, Key_Escape,
|
|
Key_LeftControl, Key_Backspace, Key_LeftGui, Key_LeftShift,
|
|
ShiftToLayer(FUNCTION),
|
|
|
|
M(MACRO_ANY), Key_6, Key_7, Key_8, Key_9, Key_0, LockLayer(NUMPAD),
|
|
Key_Enter, Key_J, Key_L, Key_U, Key_Y, Key_Semicolon, Key_Equals,
|
|
Key_H, Key_N, Key_E, Key_I, Key_O, Key_Quote,
|
|
Key_RightAlt, Key_K, Key_M, Key_Comma, Key_Period, Key_Slash, Key_Minus,
|
|
Key_RightShift, Key_LeftAlt, Key_Spacebar, Key_RightControl,
|
|
ShiftToLayer(FUNCTION)),
|
|
|
|
#elif defined (PRIMARY_KEYMAP_CUSTOM)
|
|
// Edit this keymap to make a custom layout
|
|
[PRIMARY] = KEYMAP_STACKED
|
|
(___, Key_1, Key_2, Key_3, Key_4, Key_5, Key_LEDEffectNext,
|
|
Key_Backtick, Key_Q, Key_W, Key_E, Key_R, Key_T, Key_Tab,
|
|
Key_PageUp, Key_A, Key_S, Key_D, Key_F, Key_G,
|
|
Key_PageDown, Key_Z, Key_X, Key_C, Key_V, Key_B, Key_Escape,
|
|
Key_LeftControl, Key_Backspace, Key_LeftGui, Key_LeftShift,
|
|
ShiftToLayer(FUNCTION),
|
|
|
|
M(MACRO_ANY), Key_6, Key_7, Key_8, Key_9, Key_0, LockLayer(NUMPAD),
|
|
Key_Enter, Key_Y, Key_U, Key_I, Key_O, Key_P, Key_Equals,
|
|
Key_H, Key_J, Key_K, Key_L, Key_Semicolon, Key_Quote,
|
|
Key_RightAlt, Key_N, Key_M, Key_Comma, Key_Period, Key_Slash, Key_Minus,
|
|
Key_RightShift, Key_LeftAlt, Key_Spacebar, Key_RightControl,
|
|
ShiftToLayer(FUNCTION)),
|
|
|
|
#else
|
|
|
|
#error "No default keymap defined. You should make sure that you have a line like '#define PRIMARY_KEYMAP_QWERTY' in your sketch"
|
|
|
|
#endif
|
|
|
|
|
|
|
|
[NUMPAD] = KEYMAP_STACKED
|
|
(___, ___, ___, ___, ___, ___, ___,
|
|
___, ___, ___, ___, ___, ___, ___,
|
|
___, ___, ___, ___, ___, ___,
|
|
___, ___, ___, ___, ___, ___, ___,
|
|
___, ___, ___, ___,
|
|
___,
|
|
|
|
M(MACRO_VERSION_INFO), ___, Key_7, Key_8, Key_9, Key_KeypadSubtract, ___,
|
|
___, ___, Key_4, Key_5, Key_6, Key_KeypadAdd, ___,
|
|
___, Key_1, Key_2, Key_3, Key_Equals, ___,
|
|
___, ___, Key_0, Key_Period, Key_KeypadMultiply, Key_KeypadDivide, Key_Enter,
|
|
___, ___, ___, ___,
|
|
___),
|
|
|
|
[FUNCTION] = KEYMAP_STACKED
|
|
(___, Key_F1, Key_F2, Key_F3, Key_F4, Key_F5, Key_CapsLock,
|
|
Key_Tab, ___, Key_mouseUp, ___, Key_mouseBtnR, Key_mouseWarpEnd, Key_mouseWarpNE,
|
|
Key_Home, Key_mouseL, Key_mouseDn, Key_mouseR, Key_mouseBtnL, Key_mouseWarpNW,
|
|
Key_End, Key_PrintScreen, Key_Insert, ___, Key_mouseBtnM, Key_mouseWarpSW, Key_mouseWarpSE,
|
|
___, Key_Delete, ___, ___,
|
|
___,
|
|
|
|
Consumer_ScanPreviousTrack, Key_F6, Key_F7, Key_F8, Key_F9, Key_F10, Key_F11,
|
|
Consumer_PlaySlashPause, Consumer_ScanNextTrack, Key_LeftCurlyBracket, Key_RightCurlyBracket, Key_LeftBracket, Key_RightBracket, Key_F12,
|
|
Key_LeftArrow, Key_DownArrow, Key_UpArrow, Key_RightArrow, ___, ___,
|
|
Key_PcApplication, Consumer_Mute, Consumer_VolumeDecrement, Consumer_VolumeIncrement, ___, Key_Backslash, Key_Pipe,
|
|
___, ___, Key_Enter, ___,
|
|
___)
|
|
) // KEYMAPS(
|
|
|
|
// Define an EGA palette. Conveniently, that's exactly 16 colors, just like the
|
|
// limit of LEDPaletteTheme.
|
|
//
|
|
// We have black and white swapped compared to a normal palette, because of
|
|
// technical reasons: colormap defaults to the last color of the palette.
|
|
PALETTE(
|
|
CRGB(0xff, 0xff, 0xff), // [0x0] white
|
|
CRGB(0x00, 0x00, 0xaa), // [0x1] blue
|
|
CRGB(0x00, 0xaa, 0x00), // [0x2] green
|
|
CRGB(0x00, 0xaa, 0xaa), // [0x3] cyan
|
|
CRGB(0xaa, 0x00, 0x00), // [0x4] red
|
|
CRGB(0xaa, 0x00, 0xaa), // [0x5] magenta
|
|
CRGB(0xaa, 0x55, 0x00), // [0x6] brown
|
|
CRGB(0xaa, 0xaa, 0xaa), // [0x7] light gray
|
|
CRGB(0x55, 0x55, 0x55), // [0x8] dark gray
|
|
CRGB(0x55, 0x55, 0xff), // [0x9] bright blue
|
|
CRGB(0x55, 0xff, 0x55), // [0xa] bright green
|
|
CRGB(0x55, 0xff, 0xff), // [0xb] bright cyan
|
|
CRGB(0xff, 0x55, 0x55), // [0xc] bright red
|
|
CRGB(0xff, 0x55, 0xff), // [0xd] bright magenta
|
|
CRGB(0xff, 0xff, 0x55), // [0xe] yellow
|
|
CRGB(0x00, 0x00, 0x00) // [0xf] black
|
|
) // PALETTE
|
|
|
|
COLORMAPS(
|
|
// Our Primary layer has all LEDs off
|
|
[PRIMARY] = COLORMAP_STACKED(
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf,
|
|
0xf,
|
|
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf,
|
|
0xf),
|
|
// For the Numpad layer, we set the num lock key to blue, and the numpad keys
|
|
// to red.
|
|
[NUMPAD] = COLORMAP_STACKED(
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf,
|
|
0xf, 0xf, 0xf, 0xf,
|
|
0xf,
|
|
|
|
0xf, 0xf, 0x4, 0x4, 0x4, 0x4, 0x1,
|
|
0xf, 0xf, 0x4, 0x4, 0x4, 0x4, 0xf,
|
|
0xf, 0x4, 0x4, 0x4, 0x4, 0xf,
|
|
0xf, 0xf, 0x4, 0x4, 0x4, 0x4, 0x4,
|
|
0xf, 0xf, 0xf, 0xf,
|
|
0xf)
|
|
)
|
|
|
|
/* Re-enable astyle's indent enforcement */
|
|
// clang-format on
|
|
|
|
/** versionInfoMacro handles the 'firmware version info' macro
|
|
* When a key bound to the macro is pressed, this macro
|
|
* prints out the firmware build information as virtual keystrokes
|
|
*/
|
|
|
|
static void versionInfoMacro(uint8_t key_state) {
|
|
if (keyToggledOn(key_state)) {
|
|
Macros.type(PSTR("Keyboardio Model 100 - Kaleidoscope "));
|
|
Macros.type(PSTR(BUILD_INFORMATION));
|
|
}
|
|
}
|
|
|
|
/** anyKeyMacro is used to provide the functionality of the 'Any' key.
|
|
*
|
|
* When the 'any key' macro is toggled on, a random alphanumeric key is
|
|
* selected. While the key is held, the function generates a synthetic
|
|
* keypress event repeating that randomly selected key.
|
|
*
|
|
*/
|
|
|
|
static void anyKeyMacro(KeyEvent &event) {
|
|
if (keyToggledOn(event.state)) {
|
|
event.key.setKeyCode(Key_A.getKeyCode() + (uint8_t)(millis() % 36));
|
|
event.key.setFlags(0);
|
|
}
|
|
}
|
|
|
|
|
|
/** macroAction dispatches keymap events that are tied to a macro
|
|
to that macro. It takes two uint8_t parameters.
|
|
|
|
The first is the macro being called (the entry in the 'enum' earlier in this file).
|
|
The second is the state of the keyswitch. You can use the keyswitch state to figure out
|
|
if the key has just been toggled on, is currently pressed or if it's just been released.
|
|
|
|
The 'switch' statement should have a 'case' for each entry of the macro enum.
|
|
Each 'case' statement should call out to a function to handle the macro in question.
|
|
|
|
*/
|
|
|
|
const macro_t *macroAction(uint8_t macro_id, KeyEvent &event) {
|
|
switch (macro_id) {
|
|
|
|
case MACRO_VERSION_INFO:
|
|
versionInfoMacro(event.state);
|
|
break;
|
|
|
|
case MACRO_ANY:
|
|
anyKeyMacro(event);
|
|
break;
|
|
}
|
|
return MACRO_NONE;
|
|
}
|
|
|
|
|
|
// These 'solid' color effect definitions define a rainbow of
|
|
// LED color modes calibrated to draw 500mA or less on the
|
|
// Keyboardio Model 100.
|
|
|
|
|
|
static kaleidoscope::plugin::LEDSolidColor solidRed(160, 0, 0);
|
|
static kaleidoscope::plugin::LEDSolidColor solidOrange(140, 70, 0);
|
|
static kaleidoscope::plugin::LEDSolidColor solidYellow(130, 100, 0);
|
|
static kaleidoscope::plugin::LEDSolidColor solidGreen(0, 160, 0);
|
|
static kaleidoscope::plugin::LEDSolidColor solidBlue(0, 70, 130);
|
|
static kaleidoscope::plugin::LEDSolidColor solidIndigo(0, 0, 170);
|
|
static kaleidoscope::plugin::LEDSolidColor solidViolet(130, 0, 120);
|
|
|
|
/** toggleLedsOnSuspendResume toggles the LEDs off when the host goes to sleep,
|
|
* and turns them back on when it wakes up.
|
|
*/
|
|
void toggleLedsOnSuspendResume(kaleidoscope::plugin::HostPowerManagement::Event event) {
|
|
switch (event) {
|
|
case kaleidoscope::plugin::HostPowerManagement::Suspend:
|
|
LEDControl.disable();
|
|
break;
|
|
case kaleidoscope::plugin::HostPowerManagement::Resume:
|
|
LEDControl.enable();
|
|
break;
|
|
case kaleidoscope::plugin::HostPowerManagement::Sleep:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** hostPowerManagementEventHandler dispatches power management events (suspend,
|
|
* resume, and sleep) to other functions that perform action based on these
|
|
* events.
|
|
*/
|
|
void hostPowerManagementEventHandler(kaleidoscope::plugin::HostPowerManagement::Event event) {
|
|
toggleLedsOnSuspendResume(event);
|
|
}
|
|
|
|
/** This 'enum' is a list of all the magic combos used by the Model 100's
|
|
* firmware The names aren't particularly important. What is important is that
|
|
* each is unique.
|
|
*
|
|
* These are the names of your magic combos. They will be used by the
|
|
* `USE_MAGIC_COMBOS` call below.
|
|
*/
|
|
enum {
|
|
// Toggle between Boot (6-key rollover; for BIOSes and early boot) and NKRO
|
|
// mode.
|
|
COMBO_TOGGLE_NKRO_MODE,
|
|
// Enter test mode
|
|
COMBO_ENTER_TEST_MODE
|
|
};
|
|
|
|
/** Wrappers, to be used by MagicCombo. **/
|
|
|
|
/**
|
|
* This simply toggles the keyboard protocol via USBQuirks, and wraps it within
|
|
* a function with an unused argument, to match what MagicCombo expects.
|
|
*/
|
|
static void toggleKeyboardProtocol(uint8_t combo_index) {
|
|
USBQuirks.toggleKeyboardProtocol();
|
|
}
|
|
|
|
/**
|
|
* This enters the hardware test mode
|
|
*/
|
|
static void enterHardwareTestMode(uint8_t combo_index) {
|
|
HardwareTestMode.runTests();
|
|
}
|
|
|
|
|
|
/** Magic combo list, a list of key combo and action pairs the firmware should
|
|
* recognise.
|
|
*/
|
|
USE_MAGIC_COMBOS({.action = toggleKeyboardProtocol,
|
|
// Left Fn + Esc + Shift
|
|
.keys = {R3C6, R2C6, R3C7}},
|
|
{.action = enterHardwareTestMode,
|
|
// Left Fn + Prog + LED
|
|
.keys = {R3C6, R0C0, R0C6}});
|
|
|
|
// First, tell Kaleidoscope which plugins you want to use.
|
|
// The order can be important. For example, LED effects are
|
|
// added in the order they're listed here.
|
|
KALEIDOSCOPE_INIT_PLUGINS(
|
|
// The EEPROMSettings & EEPROMKeymap plugins make it possible to have an
|
|
// editable keymap in EEPROM.
|
|
EEPROMSettings,
|
|
EEPROMKeymap,
|
|
|
|
// Focus allows bi-directional communication with the host, and is the
|
|
// interface through which the keymap in EEPROM can be edited.
|
|
Focus,
|
|
|
|
// FocusSettingsCommand adds a few Focus commands, intended to aid in
|
|
// changing some settings of the keyboard, such as the default layer (via the
|
|
// `settings.defaultLayer` command)
|
|
FocusSettingsCommand,
|
|
|
|
// FocusEEPROMCommand adds a set of Focus commands, which are very helpful in
|
|
// both debugging, and in backing up one's EEPROM contents.
|
|
FocusEEPROMCommand,
|
|
|
|
// The boot greeting effect pulses the LED button for 10 seconds after the
|
|
// keyboard is first connected
|
|
BootGreetingEffect,
|
|
|
|
// The hardware test mode, which can be invoked by tapping Prog, LED and the
|
|
// left Fn button at the same time.
|
|
HardwareTestMode,
|
|
|
|
// LEDControl provides support for other LED modes
|
|
LEDControl,
|
|
|
|
// We start with the LED effect that turns off all the LEDs.
|
|
LEDOff,
|
|
|
|
// The rainbow effect changes the color of all of the keyboard's keys at the same time
|
|
// running through all the colors of the rainbow.
|
|
LEDRainbowEffect,
|
|
|
|
// The rainbow wave effect lights up your keyboard with all the colors of a rainbow
|
|
// and slowly moves the rainbow across your keyboard
|
|
LEDRainbowWaveEffect,
|
|
|
|
// The chase effect follows the adventure of a blue pixel which chases a red pixel across
|
|
// your keyboard. Spoiler: the blue pixel never catches the red pixel
|
|
LEDChaseEffect,
|
|
|
|
// These static effects turn your keyboard's LEDs a variety of colors
|
|
solidRed,
|
|
solidOrange,
|
|
solidYellow,
|
|
solidGreen,
|
|
solidBlue,
|
|
solidIndigo,
|
|
solidViolet,
|
|
|
|
// The breathe effect slowly pulses all of the LEDs on your keyboard
|
|
LEDBreatheEffect,
|
|
|
|
// The AlphaSquare effect prints each character you type, using your
|
|
// keyboard's LEDs as a display
|
|
AlphaSquareEffect,
|
|
|
|
// The stalker effect lights up the keys you've pressed recently
|
|
StalkerEffect,
|
|
|
|
// The LED Palette Theme plugin provides a shared palette for other plugins,
|
|
// like Colormap below
|
|
LEDPaletteTheme,
|
|
|
|
// The Colormap effect makes it possible to set up per-layer colormaps
|
|
ColormapEffect,
|
|
// The default colormap plugin allows us to set up a default palette &
|
|
// colormap.
|
|
DefaultColormap,
|
|
|
|
// The macros plugin adds support for macros
|
|
Macros,
|
|
|
|
// The MouseKeys plugin lets you add keys to your keymap which move the mouse.
|
|
MouseKeys,
|
|
|
|
// The HostPowerManagement plugin allows us to turn LEDs off when then host
|
|
// goes to sleep, and resume them when it wakes up.
|
|
HostPowerManagement,
|
|
|
|
// The MagicCombo plugin lets you use key combinations to trigger custom
|
|
// actions - a bit like Macros, but triggered by pressing multiple keys at the
|
|
// same time.
|
|
MagicCombo,
|
|
|
|
// The USBQuirks plugin lets you do some things with USB that we aren't
|
|
// comfortable - or able - to do automatically, but can be useful
|
|
// nevertheless. Such as toggling the key report protocol between Boot (used
|
|
// by BIOSes) and Report (NKRO).
|
|
USBQuirks,
|
|
|
|
// The Qukeys plugin enables the "Secondary action" functionality in
|
|
// Chrysalis. Keys with secondary actions will have their primary action
|
|
// performed when tapped, but the secondary action when held.
|
|
Qukeys,
|
|
|
|
// Enables the "Sticky" behavior for modifiers, and the "Layer shift when
|
|
// held" functionality for layer keys.
|
|
OneShot,
|
|
EscapeOneShot,
|
|
EscapeOneShotConfig,
|
|
|
|
// Turns LEDs off after a configurable amount of idle time.
|
|
IdleLEDs,
|
|
PersistentIdleLEDs,
|
|
|
|
// Enables setting a default LED mode without compiling new firmware.
|
|
DefaultLEDModeConfig,
|
|
|
|
// Enables dynamic, Chrysalis-editable macros.
|
|
DynamicMacros);
|
|
|
|
/** The 'setup' function is one of the two standard Arduino sketch functions.
|
|
* It's called when your keyboard first powers up. This is where you set up
|
|
* Kaleidoscope and any plugins.
|
|
*/
|
|
void setup() {
|
|
// First, call Kaleidoscope's internal setup function
|
|
Kaleidoscope.setup();
|
|
|
|
// We configure the AlphaSquare effect to use RED letters
|
|
AlphaSquare.color = CRGB(255, 0, 0);
|
|
|
|
// We set the brightness of the rainbow effects to 150 (on a scale of 0-255)
|
|
// This draws more than 500mA, but looks much nicer than a dimmer effect
|
|
LEDRainbowEffect.brightness(255);
|
|
LEDRainbowWaveEffect.brightness(255);
|
|
|
|
// Set the action key the test mode should listen for to Left Fn
|
|
HardwareTestMode.setActionKey(R3C6);
|
|
|
|
// The LED Stalker mode has a few effects. The one we like is called
|
|
// 'BlazingTrail'. For details on other options, see
|
|
// https://github.com/keyboardio/Kaleidoscope/blob/master/docs/plugins/LED-Stalker.md
|
|
StalkerEffect.variant = STALKER(BlazingTrail);
|
|
|
|
// To make the keymap editable without flashing new firmware, we store
|
|
// additional layers in EEPROM. For now, we reserve space for eight layers. If
|
|
// one wants to use these layers, just set the default layer to one in EEPROM,
|
|
// by using the `settings.defaultLayer` Focus command, or by using the
|
|
// `keymap.onlyCustom` command to use EEPROM layers only.
|
|
EEPROMKeymap.setup(8);
|
|
|
|
// We need to tell the Colormap plugin how many layers we want to have custom
|
|
// maps for. To make things simple, we set it to eight layers, which is how
|
|
// many editable layers we have (see above).
|
|
ColormapEffect.max_layers(8);
|
|
|
|
// For Dynamic Macros, we need to reserve storage space for the editable
|
|
// macros. A kilobyte is a reasonable default.
|
|
DynamicMacros.reserve_storage(1024);
|
|
|
|
// Install a default palette & colormap if none are present
|
|
DefaultColormap.setup();
|
|
|
|
// If our EEPROM is uninitialized, default to the ColormapEffect as our
|
|
// default LED mode.
|
|
DefaultLEDModeConfig.activateLEDModeIfUnconfigured(&ColormapEffect);
|
|
}
|
|
|
|
/** loop is the second of the standard Arduino sketch functions.
|
|
* As you might expect, it runs in a loop, never exiting.
|
|
*
|
|
* For Kaleidoscope-based keyboard firmware, you usually just want to
|
|
* call Kaleidoscope.loop(); and not do anything custom here.
|
|
*/
|
|
|
|
void loop() {
|
|
Kaleidoscope.loop();
|
|
}
|