You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Kaleidoscope/plugins/Kaleidoscope-FocusSerial
Gergely Nagy 8f58179241
FocusSerial: Implement a `device.reset` command
3 years ago
..
src FocusSerial: Implement a `device.reset` command 3 years ago
README.md New hook: onNameQuery() 4 years ago
library.properties More library tweaking to comply with arduino requirements 4 years ago

README.md

FocusSerial

Bidirectional communication for Kaleidoscope. With this plugin enabled, plugins that implement the onFocusEvent hook will start responding to Focus commands sent via Serial, allowing bidirectional communication between firmware and host.

This plugin is an upgrade of the former Kaleidoscope-Focus plugin. See the UPGRADING.md document for information about how to transition to the new system.

Using the plugin

This plugin is not meant to be used by the end-user (apart from setting it up to use plugin-provided hooks), but by plugin authors instead. As an end user, you just need to use Focus-enabled plugins like you normally would, and once FocusSerial is enabled, their commands will be available too.

Nevertheless, a very simple example is shown below:

#include <Kaleidoscope.h>
#include <Kaleidoscope-FocusSerial.h>

namespace kaleidoscope {
class FocusTestCommand : public Plugin {
 public:
  FocusTestCommand() {}

  EventHandlerResult onNameQuery() {
    return ::Focus.sendName(F("FocusTestCommand"));
  }

  EventHandlerResult onFocusEvent(const char *command) {
    if (strcmp_P(command, PSTR("test")) != 0)
      return EventHandlerResult::OK;

    ::Focus.send(F("Congratulations, the test command works!"));
    return EventHandlerResult::EVENT_CONSUMED;
  }
};
}

kaleidoscope::FocusTestCommand FocusTestCommand;

KALEIDOSCOPE_INIT_PLUGINS(Focus, FocusTestCommand);

void setup () {
  Kaleidoscope.setup ();
}

Plugin methods

The plugin provides the Focus object, with a couple of helper methods aimed at developers. Terminating the response with a dot on its own line is handled implicitly by FocusSerial, one does not need to do that explicitly.

.send(...)

.sendRaw(...)

Sends a list of variables over the wire. The difference between .send() and .sendRaw() is that the former puts a space between each variable, the latter does not. If one just wants to send a list of things, use the former. If one needs more control over the formatting, use the latter. In most cases, .send() is the recommended method to use.

Both of them take a variable number of arguments, of almost any type: all built-in types can be sent, cRGB, Key and bool too in addition. For colors, .send() will write them as an R G B sequence; Key objects will be sent as the raw 16-bit keycode; and bool will be sent as either the string true, or false.

.sendName(F("..."))

To be used with the onNameQuery() hook, this sends the plugin name given, followed by a newline, and returns EventHandlerResult::OK, so that onNameQuery() hooks can be implemented in a single line with the help of this function.

.read(variable)

Depending on the type of the variable passed by reference, reads a 8 or 16-bit unsigned integer, a Key, or a cRGB color from the wire, into the variable passed as the argument.

.peek()

Returns the next character on the wire, without reading it. Subsequent reads will include the peeked-at byte too.

.isEOL()

Returns whether we're at the end of the request line.

.COMMENT

When sending something to the host that is not a response to a request, prefix the response lines with this.

.SEPARATOR

To be used when using .sendRaw, when one needs complete control over where separators are inserted into the response.

Wire protocol

Focus uses a simple, textual, request-response-based wire protocol.

Each request has to be on one line, anything before the first space is the command part (if there is no space, just a newline, then the whole line will be considered a command), everything after are arguments. The plugin itself only parses until the end of the command part, argument parsing is left to the various hooks. If there is anything left on the line after hooks are done processing, it will be ignored.

Responses can be multi-line, but most aren't. Their content is also up to the hooks, Focus does not enforce anything, except a trailing dot and a newline. Responses should end with a dot on its own line.

Apart from these, there are no restrictions on what can go over the wire, but to make the experience consistent, find a few guidelines below:

  • Commands should be namespaced, so that the plugin name, or functionality comes first, then the sub-command or property. Such as led.theme, or led.setAll.
  • One should not use setters and getters, but a single property command instead. One, which when called without arguments, will act as a getter, and as a setter otherwise.
  • Namespaces should be lowercase, while the commands within them camel-case.
  • Do as little work in the hooks as possible. While the protocol is human readable, the expectation is that tools will be used to interact with the keyboard.
  • As such, keep formatting to the bare minimum. No fancy table-like responses.
  • In general, the output of a getter should be copy-pasteable to a setter.
  • Messages sent to the host, without a request, should be prefixed with a hash mark (Focus.COMMENT).

These are merely guidelines, and there can be - and are - exceptions. Use your discretion when writing Focus hooks.

Example

In the examples below, < denotes what the host sends to the keyboard, > what the keyboard responds.

< test
> Congratulations, the test command works!
> .
< help
> help
> test
> palette
> .
< palette
> 0 0 0 128 128 128 255 255 255
> .
< palette 0 0 0 128 128 128 255 255 255
> .

Further reading

Starting from the example is the recommended way of getting started with the plugin.