You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Jesse Vincent 9e42a149b9 Make it possible to drop our power draw. ... Based on http://forum.freetronics.com/viewtopic.php?f=27&t=679 Adjusting USB bMaxPower value w/ Arduino 1.0.1 Postby adr1an » Wed May 30, 2012 1:42 pm Ok, I've not needed this personally, But fractal pointed out in another thread that when plugging the new 1.0.1 sketches into a device that only allows LowPower devices to be attached, an annoying error message is generated in MaxOSX. By default the sketches are set to negotiate to 500ma for the USB bMaxPower value - this value is part of the USB Standard and sets the maximum amount of current the device should draw. It is part of the spec, but isn't actually reflective of what current the device will draw (an important distinction I guess). In order to write sketches that work without errors on the Host using the LeoStick w/ Arduino 1.0.1, then you can do the following to enable you to adjust the MaxPower values. Its ugly, and I have no idea what I'm doing, but it works, and compiles without error. So this works, but no idea if its the best way.. Edit USBCore.cpp . Around line 47 or so, you'll see CODE: SELECT ALL extern const DeviceDescriptor USB_DeviceDescriptorA PROGMEM; Add the line CODE: SELECT ALL int usbMaxPower = 500; Edit USBCore.h. Edit the D_CONFIG define around line 284 to be: CODE: SELECT ALL { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(usbMaxPower) } By default, it will now negotiate 500ma. However in your sketch, at the top, define CODE: SELECT ALL extern int usbMaxPower Then you can do in setup(), before calling any USB descriptors (i.e, one of the first things) CODE: SELECT ALL usbMaxPower = 100; Voila! Script defineable usbMaxPower values... albeit very klunky and involving hacks to the USBCore.cpp/USBCore.h - which I was trying to avoid. Incidentally - theres a bunch more VID/PID locations I should update I've found, as well as that ugly "Unknown IO" - so will post a fix to that in next day or so. In the meantime - let me know if the above works - curious how transportable the hack is (it seems to have had almost negligible impact on sketch size too! about 6 bytes?)		11 years ago
..
avr-libc	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Arduino.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
CDC.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Client.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
HID.cpp	non-working first pass at systemcontrol and consumercontrol	11 years ago
HardwareSerial.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
HardwareSerial.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
IPAddress.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
IPAddress.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Platform.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Print.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Print.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Printable.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Server.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Stream.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Stream.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Tone.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
USBAPI.h	absolute mouse breaks things	11 years ago
USBCore.cpp	Make it possible to drop our power draw.	11 years ago
USBCore.h	Make it possible to drop our power draw.	11 years ago
USBDesc.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
Udp.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
WCharacter.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
WInterrupts.c	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
WMath.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
WString.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
WString.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
binary.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
license.txt	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
main.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
new.cpp	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
new.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
todo.txt	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
wiring.c	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
wiring_analog.c	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
wiring_digital.c	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
wiring_private.h	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
wiring_pulse.c	Add a first pass at an arduino core for our keyboard firmware based	11 years ago
wiring_shift.c	Add a first pass at an arduino core for our keyboard firmware based	11 years ago