Kaleidoscope/bin/kaleidoscope-builder

#!/usr/bin/env bash
# kaleidoscope-builder - Kaleidoscope helper tool
# Copyright (C) 2017-2018  Keyboard.io, Inc.
#
# This program is free software: you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation, version 3.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along with
# this program. If not, see <http://www.gnu.org/licenses/>.

set -e

######
###### Build and output configuration
######

identify_os() {

	## Platform-specific overrides
	# Shamelessly stolen from git's Makefile
	uname_S=$(uname -s 2>/dev/null || echo not)
	uname_O=$(uname -o 2>/dev/null || echo not)
}

adjust_for_virtual_build() {
	if [ "${uname_S}" = "FreeBSD" ]; then
		: "${COMPILER_PATH:=/usr/local/bin/}"
	else
		: "${COMPILER_PATH:=/usr/bin/}"
	fi

	COMPILER_PREFIX=""
}

adjust_for_cygwin() {
	# The Windows arduino-builder.exe doesn't understand being told to exec against Cygwin symlinks
	CCACHE_NOT_SUPPORTED=1

	# It's important that all of these be underneath /cygdrive/c so they can be converted to Windows paths that the
	# Windows Arduino binaries can understand.
	: "${TMPDIR:=/cygdrive/c/Users/${USER}/AppData/Local/Temp}"

	# We need to prevent Windows executables from being passed parameters that are absolute paths, since they won't
	# be interpretable when of the form /cygdrive/c/foo. To work around this, we set the common path root variables
	# to use relative paths instead of absolute paths, since those have mostly platform-agnostic behavior.
	#
	# Note that this trick requires that all of these paths exist on the same drive letter as the current directory,
	# since otherwise even the relative paths would include Cygwin-specific components. So...
	if [[ $(realpath --relative-base=/cygdrive/c .) == /* ]]; then
		echo "kaleidoscope-builder's Cygwin support is currently limited to running from within /cygdrive/c"
		exit 1
	fi

	TMPDIR="$(realpath --relative-to=./ ${TMPDIR})"
}

absolute_filename() {
	echo "$(cd "$(dirname "$1")" && pwd)/$(basename "$1")"
}

read_conf_files() {

	for conf_file in \
		"${HOME}/.kaleidoscope-builder.conf" \
		"$(pwd)/.kaleidoscope-builder.conf" \
		"$(pwd)/kaleidoscope-builder.conf"; do
		if [ -e "${conf_file}" ]; then
			# shellcheck disable=SC1090
			. "${conf_file}"
		fi

	done
}
configure_arduino_cli_env() {

	SYSTEM_ARDUINO_CLI="$(command -v arduino-cli || true)"

	if [ -z "${SYSTEM_ARDUINO_CLI}" ]; then
		: "${ARDUINO_CLI:=${KALEIDOSCOPE_BIN_DIR}/arduino-cli}"
	else
		: "${ARDUINO_CLI:=${SYSTEM_ARDUINO_CLI}}"
	fi

	: "${ARDUINO_CONTENT:=${KALEIDOSCOPE_DIR}/.arduino}"
	: "${ARDUINO_DIRECTORIES_DATA:=${ARDUINO_CONTENT}/data}"
	: "${ARDUINO_DIRECTORIES_DOWNLOADS:=${ARDUINO_CONTENT}/downloads}"
	: "${ARDUINO_DIRECTORIES_USER:=${ARDUINO_CONTENT}/user}"
	: "${ARDUINO_CLI_CONFIG:=${ARDUINO_DIRECTORIES_DATA}/arduino-cli.yaml}"
	: "${ARDUINO_BOARDS_MANAGER_KALEIDOSCOPE:=https://raw.githubusercontent.com/keyboardio/boardsmanager/master/package_keyboardio_index.json}"
}

install_arduino_cli() {
	# todo cd to kaleidoscope dir
	curl -fsSL https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh | sh
}

configure_arduino_cli() {
	if [ -z "${ARDUINO_CLI}" ]; then
		install_arduino_cli
	fi
	if [ -z "${ARDUINO_CLI_CONFIG}" ]; then
		install_arduino_cli_config
	fi
}

install_arduino_cli_config() {
	run_arduino_cli config init
}

install_arduino_core_kaleidoscope() {
	install_arduino_core_avr

	install_arduino_core "keyboardio:avr"
}

install_arduino_core_avr() {
	install_arduino_core "arduino:avr"
}

install_arduino_core() {
	run_arduino_cli core install "$1"
}

run_arduino_cli() {
	ARDUINO_DIRECTORIES_USER=${ARDUINO_DIRECTORIES_USER} \
		ARDUINO_DIRECTORIES_DATA=${ARDUINO_DIRECTORIES_DATA} \
		ARDUINO_DIRECTORIES_DOWNLOADS=${ARDUINO_DIRECTORIES_DOWNLOADS} \
		ARDUINO_BOARD_MANAGER_ADDITIONAL_URLS=${ARDUINO_BOARDS_MANAGER_KALEIDOSCOPE} \
		"${ARDUINO_CLI}" "$@"
}

set_executable_paths() {
	######
	###### Executable paths
	######

	# Allow the compiler path to be empty for virtual builds
	# should use compiler.path instead of appending bin, but we don't have substitution het
	: "${COMPILER_PATH=$(get_arduino_pref 'runtime.tools.avr-gcc.path')/bin}"

	COMPILER_SUFFIX=""

	C_COMPILER_BASENAME=$(basename "${CC:-gcc}")
	CXX_COMPILER_BASENAME=$(basename "${CXX:-g++}")
	AR_BASENAME=$(basename "${AR:-ar}")

	# Allow the compiler prefix to be empty for virtual builds
	COMPILER_PREFIX="${COMPILER_PREFIX-avr-}"
	: "${AVR_OBJDUMP:=${COMPILER_PATH}/${COMPILER_PREFIX}objdump}"
	: "${AVR_OBJCOPY:=${COMPILER_PATH}/${COMPILER_PREFIX}objcopy}"
	: "${AVR_NM:=${COMPILER_PATH}/${COMPILER_PREFIX}nm}"
	: "${AVR_AR:=${COMPILER_PATH}/${COMPILER_PREFIX}ar}"
}

build_version() {
	: "${LIB_PROPERTIES_PATH:="../.."}"
	GIT_VERSION="$(
		cd "${SKETCH_DIR}"
		if [ -d .git ]; then echo -n '-g' && git describe --abbrev=4 --dirty --always; fi
	)"
	LIB_VERSION="$(
		cd "${SKETCH_DIR}"
		(grep version= "${LIB_PROPERTIES_PATH}/library.properties" 2>/dev/null || echo version=0.0.0) | cut -d= -f2
	)${GIT_VERSION}"
}

build_paths() {
	# We need that echo because we\re piping to cksum
	# shellcheck disable=SC2005
	SKETCH_IDENTIFIER="$(echo "${SKETCH_FILE_PATH}" | cksum | cut -d ' ' -f 1)-${SKETCH_FILE_NAME}"
	: "${KALEIDOSCOPE_TEMP_PATH:=${TMPDIR:-/tmp}/kaleidoscope-${USER}}"

	: "${KALEIDOSCOPE_BUILD_PATH:=${KALEIDOSCOPE_TEMP_PATH}/sketch}"
	: "${KALEIDOSCOPE_OUTPUT_PATH:=${KALEIDOSCOPE_TEMP_PATH}/sketch}"

	: "${SKETCH_OUTPUT_DIR:=${SKETCH_IDENTIFIER}/output}"
	: "${SKETCH_BUILD_DIR:=${SKETCH_IDENTIFIER}/build}"

	: "${BUILD_PATH:=${KALEIDOSCOPE_BUILD_PATH}/${SKETCH_BUILD_DIR}}"
	: "${OUTPUT_PATH:=${KALEIDOSCOPE_OUTPUT_PATH}/${SKETCH_OUTPUT_DIR}}"

	: "${CCACHE_WRAPPER_PATH:=${KALEIDOSCOPE_TEMP_PATH}/ccache/bin}"
	: "${CORE_CACHE_PATH:=${KALEIDOSCOPE_TEMP_PATH}/arduino-cores}"

	mkdir -p "$CORE_CACHE_PATH"
	mkdir -p "$BUILD_PATH"
}

build_filenames() {
	: "${OUTPUT_FILE_PREFIX:=${SKETCH_BASE_NAME}-${LIB_VERSION}}"
	: "${HEX_FILE_PATH:=${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.hex}"
	: "${HEX_FILE_WITH_BOOTLOADER_PATH:=${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}-with-bootloader.hex}"
	: "${ELF_FILE_PATH:=${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.elf}"
	: "${LIB_FILE_PATH:=${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.a}"
}

enable_ccache() {
	if [ -z "${CCACHE_NOT_SUPPORTED}" ] && [ "$(command -v ccache)" ]; then
		if ! [ -d "$CCACHE_WRAPPER_PATH" ]; then
			mkdir -p "$CCACHE_WRAPPER_PATH"

			if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}${C_COMPILER_BASENAME}" ]; then
				ln -s "$(command -v ccache)" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}${C_COMPILER_BASENAME}"
			fi

			if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}${CXX_COMPILER_BASENAME}" ]; then
				ln -s "$(command -v ccache)" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}${CXX_COMPILER_BASENAME}"
			fi

			if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}nm" ]; then
				ln -s "${AVR_NM}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}nm"
			fi

			if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}objcopy" ]; then
				ln -s "${AVR_OBJCOPY}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}objcopy"
			fi

			if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}ar" ]; then
				ln -s "${AVR_AR}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}ar"
			fi

			if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}size" ]; then
				ln -s "${AVR_SIZE}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}size"
			fi
		fi

		export CCACHE_PATH=${COMPILER_PATH}/
		CCACHE_ENABLED=1

	fi
	if [ $CCACHE_ENABLED ]; then
		COMPILER_PATH_PROP="${CCACHE_WRAPPER_PATH}/"
	else
		COMPILER_PATH_PROP="${COMPILER_PATH}"
	fi

}


find_sketch() {
	SKETCH_DIR="${SKETCH:-$(absolute_filename "$(pwd)")}"
	SKETCH_BASE_NAME=$(basename "${SKETCH_DIR}")
	SKETCH_FILE_NAME="${SKETCH_BASE_NAME}.ino"

	# Arduino sketches are usually a file inside directory Foo named Foo.ino, so try that as a fallback
	for dir in \
		"${SKETCH_DIR}" \
		"src/" \
		"."; do
		if [ -f "${dir}/${SKETCH_FILE_NAME}" ]; then
			SKETCH_DIR="${dir}"
			SKETCH_FILE_PATH=$(absolute_filename "${dir}/${SKETCH_FILE_NAME}")
			return
		fi
	done
	echo "I couldn't find your sketch (.ino file)" >&2
	exit 1
}

find_device_vid_pid() {
	: "${VID:=$(get_arduino_pref 'build.vid')}"
	: "${SKETCH_PID:=$(get_arduino_pref 'build.pid')}"
	: "${BOOTLOADER_PID:=$(get_arduino_pref 'bootloader.pid')}"
	: "${BOOTLOADER_VID:=$(get_arduino_pref 'bootloader.vid')}"
}

prompt_before_flashing() {
	flashing_instructions=$(get_arduino_pref 'build.flashing_instructions')

	if [ "x${flashing_instructions}x" = "xx" ]; then
		flashing_instructions="If your keyboard needs you to do something to put it in flashing mode, do that now."
	fi

	printf '%b\n\n' "${flashing_instructions}"
	echo ""
	echo "When you're ready to proceed, press 'Enter'."

	# We do not want to permit line continuations here. We just want a newline.
	# shellcheck disable=SC2162
	read
}


flash() {
	compile "$@"

	find_device_vid_pid
	# Check to see if we can see a keyboard bootloader port.
	# If we -can-, then we should skip over the "reset to bootloader" thing
	find_bootloader_ports
	if [ -z "${DEVICE_PORT_BOOTLOADER}" ]; then
		prompt_before_flashing

		# This is defined in the (optional) user config.
		# shellcheck disable=SC2154
		${preFlash_HOOKS}

	find_device_port
	run_arduino_cli upload \
                --fqbn "${FQBN}" \
		--port "${DEVICE_PORT}" \
		--verbose

	fi
	run_arduino_cli upload \
                --fqbn "${FQBN}" \
		--port "${DEVICE_PORT_BOOTLOADER}" \
		--verbose

	# This is defined in the (optional) user config.
	# shellcheck disable=SC2154
	${postFlash_HOOKS}
}


hex_with_bootloader() {
	compile

	: "${BOOTLOADER_PATH:=$(get_arduino_pref 'runtime.platform.path')/bootloaders/$(get_arduino_pref 'bootloader.file')}"

	awk '/^:00000001FF/ == 0' "${HEX_FILE_PATH}" >"${HEX_FILE_WITH_BOOTLOADER_PATH}"
	echo "Using ${BOOTLOADER_PATH}"
	cat "${BOOTLOADER_PATH}" >>"${HEX_FILE_WITH_BOOTLOADER_PATH}"
	ln -sf -- "${OUTPUT_FILE_PREFIX}-with-bootloader.hex" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest-with-bootloader.hex"
	cat <<-EOF

		Combined firmware and bootloader are now at ${HEX_FILE_WITH_BOOTLOADER_PATH}
		Make sure you have the bootloader version you expect.

		And TEST THIS ON REAL HARDWARE BEFORE YOU GIVE IT TO ANYONE

	EOF
}

compile() {
	find_sketch
	set_executable_paths
	build_version
	build_paths
	build_filenames
	enable_ccache

	install -d "${OUTPUT_PATH}"

	echo "Building ${SKETCH_FILE_PATH}"

	# This is defined in the (optional) user config.
	# shellcheck disable=SC2154
	${compile_HOOKS}

	SAVED_BOARD="${BOARD}"
	SAVED_FQBN="${FQBN}"
	if [ -e "${SKETCH_DIR}/.kaleidoscope-builder.conf" ]; then
		# shellcheck disable=SC1090
		BOARD="$(. "${SKETCH_DIR}"/.kaleidoscope-builder.conf && echo "${BOARD}")"
		# shellcheck disable=SC1090
		FQBN="$(. "${SKETCH_DIR}"/.kaleidoscope-builder.conf && echo "${FQBN}")"
		if [ -n "${BOARD}" ]; then
			: "${ARCH:=avr}"
			FQBN="keyboardio:${ARCH}:${BOARD}"
		fi
	fi

	_CMD_CXX="${CXX:-${COMPILER_PREFIX}${CXX_COMPILER_BASENAME}${COMPILER_SUFFIX}}"
	_CMD_CC="${CC:-${COMPILER_PREFIX}${C_COMPILER_BASENAME}${COMPILER_SUFFIX}}"
	_CMD_AR="${AR:-${COMPILER_PREFIX}${AR_BASENAME}${COMPILER_SUFFIX}}"
	run_arduino_cli compile \
		--fqbn "${FQBN}" \
		--libraries "${KALEIDOSCOPE_DIR}/.." \
		--build-path "${BUILD_PATH}" \
		--output-dir "${OUTPUT_PATH}" \
		--build-properties "compiler.path=${COMPILER_PATH_PROP}" \
		--build-properties "compiler.c.cmd=${_CMD_CC}" \
		--build-properties "compiler.cpp.cmd=${_CMD_CXX}" \
		--build-properties "compiler.ar.cmd=${_CMD_AR}" \
		--build-properties "compiler.c.elf.cmd=${_CMD_CXX}" \
		--build-properties "compiler.cpp.extra_flags=${LOCAL_CFLAGS}" \
		--warnings all \
		"${SKETCH_FILE_PATH}"

	if [ -z "${LIBONLY}" ]; then
		cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.hex" "${HEX_FILE_PATH}"
		cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.elf" "${ELF_FILE_PATH}"
		ln -sf "${OUTPUT_FILE_PREFIX}.hex" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.hex"
		ln -sf "${OUTPUT_FILE_PREFIX}.elf" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.elf"
	else
		cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.a" "${LIB_FILE_PATH}"
		ln -sf "${OUTPUT_FILE_PREFIX}.a" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.a"
	fi

	if [ "${ARDUINO_VERBOSE}" == "--verbose" ]; then
		echo "Build artifacts can be found in ${BUILD_PATH}"
	fi

	BOARD="${SAVED_BOARD}"
	FQBN="${SAVED_FQBN}"
}

get_arduino_pref() {
	pref=$1
	# Strip the preference name. And then strip leading and trailing quotations
	MESSAGE=$(dump_arduino_prefs | grep --max-count=1 "${pref}=" | sed -e s/^.*"${pref}"=// -e 's/^"//' -e 's/"$//')
	echo "$MESSAGE"
}

dump_arduino_prefs() {
	if [ "x${_ARDUINO_PREFS}x" == "xx" ]; then
		_ARDUINO_PREFS=$(run_arduino_cli --fqbn "${FQBN}" compile --show-properties "${SKETCH_FILE_PATH}")
	fi
	echo "$_ARDUINO_PREFS"
}

find_all_sketches() {
	for sketch_name in ./*.ino \
		$([ -d examples ] && find examples -name '*.ino') \
		src/*.ino; do
		if [ -d "$(dirname "${sketch_name}")" ] || [ -f "${sketch_name}" ]; then
			p="$(basename "${sketch_name}" .ino)"
			if [ "${p}" != '*' ]; then
				case "${sketch_name}" in
				examples/*/${p}/${p}.ino)
					echo "${sketch_name}" | sed -e "s,examples/,," | sed -e "s,/${p}\\.ino,,"
					;;
				*)
					echo "${p}"
					;;
				esac
			fi
		fi
	done | sort
}

build_all() {
	plugins="$(find_all_sketches)"

	for sketch in ${plugins}; do
		$0 "${sketch}" compile
	done
}

size_map() {
	compile

	"${AVR_NM}" --size-sort -C -r -l -t decimal "${ELF_FILE_PATH}"
}

disassemble() {
	compile

	"${AVR_OBJDUMP}" -C -d "${ELF_FILE_PATH}"
}

decompile() {
	disassemble
}

clean() {
	find_sketch
	build_paths
	if [ -d "$OUTPUT_PATH" ]; then
		rm -rf -- "${OUTPUT_PATH}"
	fi
}

find_bootloader_ports() {
	if [ -n "${DEVICE_PORT_BOOTLOADER}" ]; then
		echo "DEVICE_PORT_BOOTLOADER=\"${DEVICE_PORT_BOOTLOADER}\" predefined."
		return
	fi

	: "${BOOTLOADER_VID:=${VID}}"
	if [ "${uname_S}" = "Darwin" ]; then
		DEVICE_PORT_PROBER="${KALEIDOSCOPE_BIN_DIR}/find-device-port-macos"
		DEVICE_PORT_BOOTLOADER="$(perl ${DEVICE_PORT_PROBER} ${BOOTLOADER_VID} ${BOOTLOADER_PID})"
	elif [ "${uname_O}" = "Cygwin" ]; then
		DEVICE_PORT_PROBER="${KALEIDOSCOPE_BIN_DIR}/find-device-port-windows.ps1"
		DEVICE_PORT_BOOTLOADER="$(powershell -noprofile -executionpolicy bypass ${DEVICE_PORT_PROBER} ${BOOTLOADER_VID} ${BOOTLOADER_PID} -Format COM)"
	elif [ "${uname_S}" = "FreeBSD" ]; then
		DEVICE_PORT_PROBER="${KALEIDOSCPE_BIN_DIR}/find-device-port-freebsd"
		DEVICE_PORT_BOOTLOADER="$(perl ${DEVICE_PORT_PROBER})"

	else

		DEVICE_PORT_PROBER="${KALEIDOSCOPE_BIN_DIR}/find-device-port-linux-udev"
		DEVICE_PORT_BOOTLOADER="$(perl ${DEVICE_PORT_PROBER} ${BOOTLOADER_VID} ${BOOTLOADER_PID})"
	fi
}

find_device_port() {
	if [ -n "${DEVICE_PORT}" ]; then
		echo "DEVICE_PORT=\"${DEVICE_PORT}\" predefined."
		return
	fi

	if [ "${uname_S}" = "Darwin" ]; then
		DEVICE_PORT_PROBER="${KALEIDOSCOPE_BIN_DIR}/find-device-port-macos"
		DEVICE_PORT="$(perl ${DEVICE_PORT_PROBER} ${VID} ${SKETCH_PID})"
	elif [ "${uname_O}" = "Cygwin" ]; then
		DEVICE_PORT_PROBER="${KALEIDOSCOPE_BIN_DIR}/find-device-port-windows.ps1"
		DEVICE_PORT="$(powershell -noprofile -executionpolicy bypass ${DEVICE_PORT_PROBER} ${VID} ${SKETCH_PID} -Format Cygwin)"
		DEVICE_COM_PORT="$(powershell -noprofile -executionpolicy bypass ${DEVICE_PORT_PROBER} ${VID} ${SKETCH_PID} -Format COM)"
	elif [ "${uname_S}" = "FreeBSD" ]; then
		DEVICE_PORT_PROBER="${KALEIDOSCOPE_BIN_DIR}/find-device-port-freebsd"
		DEVICE_PORT="$(perl ${DEVICE_PORT_PROBER})"
	else
		DEVICE_PORT_PROBER="${KALEIDOSCOPE_BIN_DIR}/find-device-port-linux-udev"
		DEVICE_PORT="$(perl ${DEVICE_PORT_PROBER} ${VID} ${SKETCH_PID})"
	fi
}


usage() {
	cat <<-EOF
		Usage: $0 SKETCH commands...

		Runs all of the commands in the context of the Sketch.

		Available commands:

		  help
		    This help screen.

		  compile
		    Compiles the sketch.

		  clean
		    Cleans up the output directory.

		  size-map
		    Displays the size map for the sketch.

		  disassemble
		    Decompile the sketch.

		  flash
		    Flashes the firmware using avrdude.

	EOF
}

help() {
	usage
}

if [ $# -lt 1 ]; then
	usage
	exit 1
fi

# Temporary migration for old makefiles
# I'm not thrilled about how we default to system Arduino dirs.
if [ -n "${BOARD_HARDWARE_PATH}" ]; then
	ARDUINO_DIRECTORIES_USER="${BOARD_HARDWARE_PATH}/../"
fi

: "${KALEIDOSCOPE_DIR:=$(
	cd "$(dirname "$0")"/..
	pwd
)}"
# shellcheck disable=SC2034
: "${KALEIDOSCOPE_BIN_DIR:=${KALEIDOSCOPE_DIR}/bin/}"

identify_os
read_conf_files
configure_arduino_cli_env

# shellcheck disable=SC1090

if [ -n "${VERBOSE}" ] && [[ "${VERBOSE}" -gt 0 ]]; then
	ARDUINO_VERBOSE="--verbose"
else
	ARDUINO_VERBOSE="--quiet"
fi

: "${BOARD:=model01}"

if [[ -z "${ARCH}" && -n "${FQBN}" ]]; then
	ARCH=$(echo "${FQBN}" | sed -n -e 's/^[^:]\+:\([^:]\+\).*/\1/p')
fi

: "${ARCH:=avr}"
: "${FQBN:=keyboardio:${ARCH}:${BOARD}}"

if [ "${ARCH}" = "virtual" ]; then
	adjust_for_virtual_build
fi

if [ "${uname_O}" = "Cygwin" ]; then
	adjust_for_cygwin
fi

## Parse the command-line
##  - anything that has a =, is an env var
##  - from the remaining stuff, the first one is the Library/Sketch
##  - everything else are commands
##
##  - if there is only one argument, that's a command

cmds=""

## Export vars
for i in $(seq 1 $#); do
	v="$1"
	shift

	case "${v}" in
	*=*)
		# Exporting an expansion is *precisely* what we want here.
		# shellcheck disable=SC2086,SC2163
		export ${v}
		;;
	*)
		cmds="${cmds} ${v}"
		;;
	esac
done

# Word splitting is desired here.
# shellcheck disable=SC2086
set -- ${cmds}

if [ $# -eq 1 ]; then
	cmd="$(echo "$1" | tr '-' '_')"
	${cmd}
	exit $?
fi

SKETCH="$1"
shift

cmds=""

# shellcheck disable=2034
for i in $(seq 1 $#); do
	cmds="${cmds} $(echo "$1" | tr '-' '_')"
	shift
done

for cmd in ${cmds}; do
	${cmd}
done