#!/usr/bin/env bash
# kaleidoscope-builder - Kaleidoscope helper tool
# Copyright (C) 2017-2018  Keyboard.io, Inc.
#
# This program is free software: you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation, version 3.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along with
# this program. If not, see <http://www.gnu.org/licenses/>.

set -e

######
###### Build and output configuration
######


_read_conf_files() {
	for conf_file in \
		"${HOME}/.kaleidoscope-builder.conf" \
		"$(pwd)/.kaleidoscope-builder.conf" \
		"$(pwd)/kaleidoscope-builder.conf"; do
		if [ -e "${conf_file}" ]; then
			# shellcheck disable=SC1090
			. "${conf_file}"
		fi

	done
}

cmd_configure_arduino_cli() {
	if [ -z "${ARDUINO_CLI}" ]; then
		cmd_install_arduino_cli
	fi
	if [ -z "${ARDUINO_CLI_CONFIG}" ]; then
		_run_arduino_cli config init
	fi
}

_run_arduino_cli() {
	"${ARDUINO_CLI}" "$@"
}


_arduino_prop() {
	pref=$1
	# Strip the preference name. And then strip leading and trailing quotations
	_arduino_props | grep --max-count=1 "${pref}=" | sed -e s/^.*"${pref}"=// -e 's/^"//' -e 's/"$//'
}

_arduino_props() {
	if [ "x${_ARDUINO_PREFS}x" == "xx" ]; then
		_ARDUINO_PREFS=$(_run_arduino_cli --fqbn "${FQBN}" compile --show-properties "${SKETCH_FILE_PATH}")
	fi
	echo "$_ARDUINO_PREFS"
}


_set_executable_paths() {
	uname_S=$(uname -s 2>/dev/null || echo not)

        if [ "${ARCH}" = "virtual" ]; then
                if [ "${uname_S}" = "FreeBSD" ]; then
                        : "${COMPILER_PATH:=/usr/local/bin/}"
                else
                        : "${COMPILER_PATH:=/usr/bin/}"
                fi
                COMPILER_PREFIX=""
        fi


	# Allow the compiler path to be empty for virtual builds
	# should use compiler.path instead of appending bin, but we don't have substitution het
	: "${COMPILER_PATH=$(_arduino_prop 'runtime.tools.avr-gcc.path')/bin}"

	COMPILER_SUFFIX=""

	C_COMPILER_BASENAME=$(basename "${CC:-gcc}")
	CXX_COMPILER_BASENAME=$(basename "${CXX:-g++}")
	AR_BASENAME=$(basename "${AR:-ar}")

	# Allow the compiler prefix to be empty for virtual builds
	COMPILER_PREFIX="${COMPILER_PREFIX-avr-}"
	: "${AVR_OBJDUMP:=${COMPILER_PATH}/${COMPILER_PREFIX}objdump}"
	: "${AVR_OBJCOPY:=${COMPILER_PATH}/${COMPILER_PREFIX}objcopy}"
	: "${AVR_NM:=${COMPILER_PATH}/${COMPILER_PREFIX}nm}"
	: "${AVR_SIZE:=${COMPILER_PATH}/${COMPILER_PREFIX}size}"
}

_set_build_paths() {
	# We need that echo because we\re piping to cksum
	# shellcheck disable=SC2005
	SKETCH_IDENTIFIER="$(echo "${SKETCH_FILE_PATH}" | cksum | cut -d ' ' -f 1)-${SKETCH_FILE_NAME}"

	: "${KALEIDOSCOPE_TEMP_PATH:=${TMPDIR:-/tmp}/kaleidoscope-${USER}}"

	: "${KALEIDOSCOPE_BUILD_PATH:=${KALEIDOSCOPE_TEMP_PATH}/build}"
	: "${KALEIDOSCOPE_OUTPUT_PATH:=${KALEIDOSCOPE_TEMP_PATH}/output}"

	: "${SKETCH_BUILD_DIR:=${SKETCH_IDENTIFIER}/build}"
	: "${SKETCH_OUTPUT_DIR:=${SKETCH_IDENTIFIER}/output}"

	: "${BUILD_PATH:=${KALEIDOSCOPE_BUILD_PATH}/${SKETCH_BUILD_DIR}}"
	: "${OUTPUT_PATH:=${KALEIDOSCOPE_OUTPUT_PATH}/${SKETCH_OUTPUT_DIR}}"


        : "${CORE_CACHE_PATH:=${KALEIDOSCOPE_TEMP_PATH}/arduino-cores}"


	: "${LIB_PROPERTIES_PATH:="../.."}"
	GIT_VERSION="$(
		cd "${SKETCH_DIR}"
		if [ -d .git ]; then echo -n '-g' && git describe --abbrev=4 --dirty --always; fi
	)"
	LIB_VERSION="$(
		cd "${SKETCH_DIR}"
		(grep version= "${LIB_PROPERTIES_PATH}/library.properties" 2>/dev/null || echo version=0.0.0) | cut -d= -f2
	)${GIT_VERSION}"


	: "${BOOTLOADER_PATH:=$(_arduino_prop 'runtime.platform.path')/bootloaders/$(_arduino_prop 'bootloader.file')}"
	: "${OUTPUT_FILE_PREFIX:=${SKETCH_BASE_NAME}-${LIB_VERSION}}"
	: "${HEX_FILE_PATH:=${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.hex}"
	: "${HEX_FILE_WITH_BOOTLOADER_PATH:=${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}-with-bootloader.hex}"
	: "${ELF_FILE_PATH:=${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.elf}"
	: "${LIB_FILE_PATH:=${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.a}"

	mkdir -p "$BUILD_PATH"

}




_absolute_filename() {
	echo "$(cd "$(dirname "$1")" && pwd)/$(basename "$1")"
}

_find_sketch() {
	# If we got a path to the .ino, get the directory we really want
	if [[ -n "$SKETCH" && -f "$SKETCH" ]]; then
		SKETCH="$(dirname "$SKETCH")"
	fi

	SKETCH_DIR="${SKETCH:-$(_absolute_filename "$(pwd)")}"
	SKETCH_BASE_NAME=$(basename "${SKETCH_DIR}")
	SKETCH_FILE_NAME="${SKETCH_BASE_NAME}.ino"

	# Arduino sketches are usually a file inside directory Foo named Foo.ino, so try that as a fallback
	for dir in \
		"${SKETCH_DIR}" \
		"src/" \
		"."; do
		if [ -f "${dir}/${SKETCH_FILE_NAME}" ]; then
			SKETCH_DIR="${dir}"
			SKETCH_FILE_PATH=$(_absolute_filename "${dir}/${SKETCH_FILE_NAME}")
			return
		fi
	done


	# Didn't find a sketch
	echo "I couldn't find your sketch (.ino file)" >&2
	exit 1
}

_prompt_before_flashing() {
	flashing_instructions=$(_arduino_prop 'build.flashing_instructions')
	: "${flashing_instructions:="If your keyboard needs you to do something to put it in flashing mode, do that now."}"

	printf '%b\n\n' "${flashing_instructions}"
	echo "When you're ready to proceed, press 'Enter'."

	# We do not want to permit line continuations here. We just want a newline.
	# shellcheck disable=SC2162
	read
}


cmd_flash() {
        _set_up_environment
	#TODO (arduino team) I'd love to do this with their json output
	#but it's short some of the data we kind of need
	port=$(_run_arduino_cli board list --format=text | grep "$FQBN" |cut -d' ' -f 1) 
	_prompt_before_flashing
	_run_arduino_cli upload --fqbn "${FQBN}" --port "${port}" "${ARDUINO_VERBOSE}"
}


cmd_hex_with_bootloader() {
	_set_up_environment


	awk '/^:00000001FF/ == 0' "${HEX_FILE_PATH}" >"${HEX_FILE_WITH_BOOTLOADER_PATH}"
	echo "Using ${BOOTLOADER_PATH}"
	cat "${BOOTLOADER_PATH}" >>"${HEX_FILE_WITH_BOOTLOADER_PATH}"
	ln -sf -- "${OUTPUT_FILE_PREFIX}-with-bootloader.hex" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest-with-bootloader.hex"
	cat <<-EOF

		Combined firmware and bootloader are now at ${HEX_FILE_WITH_BOOTLOADER_PATH}
		Make sure you have the bootloader version you expect.

		And TEST THIS ON REAL HARDWARE BEFORE YOU GIVE IT TO ANYONE

	EOF
}

cmd_compile() {
	_set_up_environment

	install -d "${OUTPUT_PATH}"

	echo "Building ${SKETCH_FILE_PATH}"

	# This is defined in the (optional) user config.
	# shellcheck disable=SC2154
	${compile_HOOKS}

	if [ -e "${SKETCH_DIR}/.kaleidoscope-builder.conf" ]; then
		# shellcheck disable=SC1090
		BOARD="$(. "${SKETCH_DIR}"/.kaleidoscope-builder.conf && echo "${BOARD}")"
		# shellcheck disable=SC1090
		FQBN="$(. "${SKETCH_DIR}"/.kaleidoscope-builder.conf && echo "${FQBN}")"
		if [ -n "${BOARD}" ]; then
			: "${ARCH:=avr}"
			FQBN="keyboardio:${ARCH}:${BOARD}"
		fi
	fi

	_CMD_CXX="${CXX:-${COMPILER_PREFIX}${CXX_COMPILER_BASENAME}${COMPILER_SUFFIX}}"
	_CMD_CC="${CC:-${COMPILER_PREFIX}${C_COMPILER_BASENAME}${COMPILER_SUFFIX}}"
	_CMD_AR="${AR:-${COMPILER_PREFIX}${AR_BASENAME}${COMPILER_SUFFIX}}"

	# shellcheck disable=SC2086
	_run_arduino_cli compile \
		--fqbn "${FQBN}" \
		--libraries "${KALEIDOSCOPE_DIR}/.." \
		--build-path "${BUILD_PATH}" \
		--output-dir "${OUTPUT_PATH}" \
	        --build-cache-path "${CORE_CACHE_PATH}" \
		--build-properties "compiler.path=${COMPILER_PATH}/" \
		--build-properties "compiler.c.cmd=${_CMD_CC}" \
		--build-properties "compiler.cpp.cmd=${_CMD_CXX}" \
		--build-properties "compiler.ar.cmd=${_CMD_AR}" \
		--build-properties "compiler.c.elf.cmd=${_CMD_CXX}" \
		--build-properties "compiler.cpp.extra_flags=${LOCAL_CFLAGS}" \
		--warnings all ${ARDUINO_VERBOSE} \
		"${SKETCH_FILE_PATH}"

	if [ -z "${LIBONLY}" ]; then
		cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.hex" "${HEX_FILE_PATH}"
		cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.elf" "${ELF_FILE_PATH}"
		ln -sf "${OUTPUT_FILE_PREFIX}.hex" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.hex"
		ln -sf "${OUTPUT_FILE_PREFIX}.elf" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.elf"
	else
		cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.a" "${LIB_FILE_PATH}"
		ln -sf "${OUTPUT_FILE_PREFIX}.a" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.a"
	fi

	if [ "${ARDUINO_VERBOSE}" == "--verbose" ]; then
		echo "Build artifacts can be found in ${BUILD_PATH}"
	fi
}

cmd_size_map() {
	_set_up_environment
	"${AVR_NM}" --size-sort -C -r -l -t decimal "${ELF_FILE_PATH}"
}

cmd_disassemble() {
	_set_up_environment
	"${AVR_OBJDUMP}" -C -d "${ELF_FILE_PATH}"
}

cmd_clean() {
	_set_up_environment
	if [ -d "$OUTPUT_PATH" ]; then
		rm -rf -- "${OUTPUT_PATH}"
	fi
}

_set_up_environment() {
	_find_sketch
	_set_build_paths
	_set_executable_paths
}


cmd_help() {
	cat <<-EOF
		Usage: $0 SKETCH commands...

		Runs all of the commands in the context of the Sketch.

		Available commands:

		  help
		    This help screen.

		  compile
		    Compiles the sketch.

		  clean
		    Cleans up the output directory.

		  size-map
		    Displays the size map for the sketch.

		  disassemble
		    Decompile the sketch.

		  flash
		    Flashes the firmware using avrdude.

	EOF
}

if [ $# -lt 1 ]; then
	cmd_help
	exit 1
fi

_read_conf_files

# shellcheck disable=SC1090

if [ -n "${VERBOSE}" ] && [[ "${VERBOSE}" -gt 0 ]]; then
	ARDUINO_VERBOSE="--verbose"
else
	ARDUINO_VERBOSE=""
fi

if [[ -z "${ARCH}" && -n "${FQBN}" ]]; then
	ARCH=$(echo "${FQBN}" | sed -n -e 's/^[^:]\+:\([^:]\+\).*/\1/p')
fi

: "${BOARD:=model01}"
: "${ARCH:=avr}"
: "${FQBN:=keyboardio:${ARCH}:${BOARD}}"



if [ $# -eq 2 ]; then 
	SKETCH="$1"
	shift
fi

if [ $# -eq 1 ]; then
	cmd="$(echo "$1" | tr '-' '_')"
	"cmd_${cmd}"
	exit $?
else
	"You passed more than two arguments to $0"
	help
	exit 1 
/
fi