mkfile_dir := $(dir $(abspath $(lastword $(MAKEFILE_LIST)))) # If the sketch is defined ifneq ($(SKETCH),) # If the sketch isn't a directory, we want to get the directory the sketch is in ifeq ($(wildcard $(SKETCH)/.),) SKETCH_DIR := $(dir $(SKETCH)) endif else # If the sketch wasn't defined as we came in, assume the current directory # is where we're looking SKETCH_DIR := $(realpath $(CURDIR)) endif SKETCH_BASE_NAME := $(notdir $(SKETCH_DIR)) SKETCH_FILE_NAME := $(addsuffix .ino, $(SKETCH_BASE_NAME)) # Find the path of the sketch file SKETCH_DIR_CANDIDATES = $(sketch_dir) src/ . sketch_exists_p = $(realpath $(wildcard $(dir)/$(SKETCH_FILE_NAME))) SKETCH_FILE_PATH := $(firstword $(foreach dir,$(SKETCH_DIR_CANDIDATES),$(sketch_exists_p))) include $(mkfile_dir)/arduino-cli.mk ifeq ($(FQBN),) export FQBN = $(call _arduino_prop,build.fqbn) ifneq ($(VERBOSE),) $(info Arduino provided FQBN $(call _arduino_prop,build.fqbn)) endif endif # We -could- check to see if sketch-dir is in git before running this command # but since we'd just return an empty value in that case, why bother? GIT_VERSION := $(shell git -C "$(SKETCH_DIR)" describe --abbrev=6 --dirty --alway 2>/dev/null || echo 'unknown') ifeq ($(SKETCH_IDENTIFIER),) SKETCH_IDENTIFIER := $(shell echo "${SKETCH_FILE_PATH}" | cksum | cut -d ' ' -f 1)-$(SKETCH_FILE_NAME) endif BUILD_PATH ?= $(KALEIDOSCOPE_BUILD_PATH)/$(SKETCH_IDENTIFIER) OUTPUT_PATH ?= $(KALEIDOSCOPE_OUTPUT_PATH)/$(SKETCH_IDENTIFIER) OUTPUT_FILE_PREFIX := $(SKETCH_BASE_NAME)-$(GIT_VERSION) HEX_FILE_PATH := $(OUTPUT_PATH)/$(OUTPUT_FILE_PREFIX).hex HEX_FILE_WITH_BOOTLOADER_PATH := $(OUTPUT_PATH)/$(OUTPUT_FILE_PREFIX)-with-bootloader.hex ELF_FILE_PATH := $(OUTPUT_PATH)/$(OUTPUT_FILE_PREFIX).elf LIB_FILE_PATH := $(OUTPUT_PATH)/$(OUTPUT_FILE_PREFIX).a ifeq ($(FQBN),) possible_fqbns := $(shell $(ARDUINO_CLI) board list --format=json |grep FQBN| grep -v "keyboardio:virtual"|cut -d: -f 2-) possible_fqbn = $(firstword $(possible_fqbns)) $(info *************************************************************** ) $(info ) $(info Arduino couldn't figure out what kind of device this sketch ) $(info is for. Usually, Arduino looks in a file called `sketch.json` ) $(info to figure this out. ) ifneq ($(possible_fqbn),) fake_var_to_run_shell := $(shell $(ARDUINO_CLI) board attach $(possible_fqbn)) $(info ) $(info I have detected a connected device supported by Kaleidoscope and) $(info attepted to automatically resolve this issue by running the) $(info following command:) $(info ) $(info $(ARDUINO_CLI) board attach $(possible_fqbn)) $(info ) $(info If the build fails or $(possible_fqbn) doesn't) $(info look like your keyboard, you may need to manually edit your) $(info `sketch.json` file or run ) $(info ) $(info $(ARDUINO_CLI) board attach ) $(info ) $(info manually, specifying the FQBN for your keyboard. ) $(info ) $(info *************************************************************** ) else $(info ) $(info I'm unable to detect your keyboard, you may need to manually ) $(info edit your `sketch.json` file or run ) $(info ) $(info $(ARDUINO_CLI) board attach ) $(info ) $(info manually, specifying the FQBN for your keyboard. ) $(info ) $(info *************************************************************** ) $(error ) endif endif DEFAULT_GOAL: compile #$(SKETCH_FILE_PATH): # @: # dummy recipe for the sketch file .PHONY: compile configure-arduino-cli install-arduino-core-kaleidoscope install-arduino-core-avr .PHONY: disassemble decompile size-map flash clean all test all: compile @: ## Do not remove this line, otherwise `make all` will trigger the `%` rule too. disassemble: ${ELF_FILE_PATH} $(call _arduino_prop,compiler.objdump.cmd) \ $(call _arduino_prop,compiler.objdump.flags) \ "${ELF_FILE_PATH}" size-map: ${ELF_FILE_PATH} $(call _arduino_prop,compiler.size-map.cmd) \ $(call _arduino_prop,compiler.size-map.flags) \ "${ELF_FILE_PATH}" ${ELF_FILE_PATH}: compile ${HEX_FILE_PATH}: compile BOOTLOADER_PATH := $(call _arduino_prop,runtime.platform.path)/bootloaders/$(call _arduino_prop,bootloader.file) hex-with-bootloader: ${HEX_FILE_PATH} $(QUIET) awk '/^:00000001FF/ == 0' "${HEX_FILE_PATH}" >"${HEX_FILE_WITH_BOOTLOADER_PATH}" $(QUIET) cat "${BOOTLOADER_PATH}" >>"${HEX_FILE_WITH_BOOTLOADER_PATH}" $(QUIET) ln -sf -- "${OUTPUT_FILE_PREFIX}-with-bootloader.hex" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest-with-bootloader.hex" $(info Combined firmware and bootloader are now at) $(info ${HEX_FILE_WITH_BOOTLOADER_PATH}) $(info ) $(info Make sure you have the bootloader version you expect.) $(info ) $(info ) $(info And TEST THIS ON REAL HARDWARE BEFORE YOU GIVE IT TO ANYONE.) clean: $(QUIET) rm -rf -- "${OUTPUT_PATH}"/* ifneq ($(LOCAL_CFLAGS),) local_cflags_property = --build-property "compiler.cpp.extra_flags=${LOCAL_CFLAGS}" else local_cflags_property = endif # If you set KALEIDOSCOPE_LOCAL_LIB_DIR to the name of a directory, # all of the Arduino libraries inside that directory should be used # in preference to any library with the same name further dow the search path ifneq ($(KALEIDOSCOPE_LOCAL_LIB_DIR),) _arduino_local_libraries_prop = --libraries "${KALEIDOSCOPE_LOCAL_LIB_DIR}" endif compile: kaleidoscope-hardware-configured $(QUIET) install -d "${OUTPUT_PATH}" $(QUIET) $(ARDUINO_CLI) compile --fqbn "${FQBN}" ${ARDUINO_VERBOSE} --warnings all ${ccache_wrapper_property} ${local_cflags_property} \ ${_arduino_local_libraries_prop} ${_ARDUINO_CLI_COMPILE_CUSTOM_FLAGS} \ --library "${KALEIDOSCOPE_DIR}" \ --libraries "${KALEIDOSCOPE_DIR}/plugins/" \ --build-path "${BUILD_PATH}" \ --output-dir "${OUTPUT_PATH}" \ --build-cache-path "${CORE_CACHE_PATH}" \ "${SKETCH_FILE_PATH}" ifeq ($(LIBONLY),) $(QUIET) cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.hex" "${HEX_FILE_PATH}" $(QUIET) cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.elf" "${ELF_FILE_PATH}" $(QUIET) ln -sf "${OUTPUT_FILE_PREFIX}.hex" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.hex" $(QUIET) ln -sf "${OUTPUT_FILE_PREFIX}.elf" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.elf" else $(QUIET) cp "${BUILD_PATH}/${SKETCH_FILE_NAME}.a" "${LIB_FILE_PATH}" $(QUIET) ln -sf "${OUTPUT_FILE_PREFIX}.a" "${OUTPUT_PATH}/${SKETCH_BASE_NAME}-latest.a" endif ifneq ($(VERBOSE),) $(info Build artifacts can be found in ${BUILD_PATH}) endif #TODO (arduino team) I'd love to do this with their json output #but it's short some of the data we kind of need flashing_instructions = $(call _arduino_prop,build.flashing_instructions) flash: ${HEX_FILE_PATH} ifneq ($(flashing_instructions),) $(info $(shell printf $(flashing_instructions))) else $(info If your keyboard needs you to do something to put it in flashing mode, do that now.) endif $(info ) $(info When you're ready to proceed, press 'Enter'.) $(info ) @$(shell read _) $(QUIET) $(ARDUINO_CLI) upload --fqbn $(FQBN) \ $(shell $(ARDUINO_CLI) board list --format=text | grep $(FQBN) |cut -d' ' -f 1 | xargs -n 1 echo "--port" ) \ --input-dir "${OUTPUT_PATH}" \ $(ARDUINO_VERBOSE)