A number of devices declared the bootloader in their device properties as
`BootLoader`, while the base class, and anything using it, was looking for
`Bootloader`. This resulted in these devices using the default, dummy
bootloader, rather than the one we intended to set.
This patch corrects that, and everything's using `Bootloader` now, including the
documentation.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This simple plugin does nothing more than provide a `version` focus command,
which will print the firmware version configured at build-time (defaulting to
"0.0.0").
This is a header-only plugin, so that Arduino compiles it in the same
compilation unit as the main sketch, allowing us to set the version from the
sketch, if so desired.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
The Model100 has a lot more space available compared to the Model01, so we can
have more layers in EEPROM. While we could have more than 8, 8 is the limit that
OneShot and dual-use keys support via Chrysalis, so to avoid potential
confusion, lets have 8 layers only.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This enables the IdleLEDs, Qukeys, OneShot, Escape-OneShot and DynamicMacros
plugins for the Model100 sketch. None of these - apart from IdleLEDs - cause any
change in behavior unless first configured so.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This new plugin lets us store a default palette and colormap in PROGMEM.
Rather than teaching Colormap to pull from either EEPROM or PROGMEM, this
implements an entirely separate plugin, `DefaultColormap`, which is able
to *push* a palette and colormaps into Colormap.
When `DefaultColormap.setup()` is called, it checks if Colormap's storage area
is empty (both palette and the map must be empty), and if so, copies the
built-in palette and colormap over, and forces a refresh, and it has done its
job.
It does provide an additional Focus command too, `colormap.install`, which will
forcibly copy both palette and colormaps over. Useful for resetting back to a
factory setting.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
To be able to set a theme from the firmware itself, we need a couple of helper
methods. First, we need to be able to update the palette without using Focus,
and we also need to be able to update a single LED without committing it. On top
of that, we'll likely want to know if the theme is initialized.
To this end, we introduce `updatePaletteColor()`, which updates an entry in the
palette, but does not commit it, and `isThemeUninitialized()` which does as the
name suggests: it checks if the palette and the theme slices are all uninitialized.
We also change `updateColorIndexAtPosition()` to not commit. The single user of
it was FingerPainter, and we update that to do an explicit commit after.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This test verifies that PrefixLayer doesn't clear held non-modifier keys from
the report before sending the prefix sequence.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This new plugin provides a way to set a default (but configurable, via Focus)
led mode, or use a specific one if EEPROM is uninitialized.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This basically reverts 07dcf1dc9b, returning the
plugin to its original behaviour of persisting the current led mode. We do this
because we'll be using a new, different plugin to set the default led mode, to
not conflate the two different functionalities.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
`kaleidoscope::driver::storage::AVREEPROM` wasn't implementing its own
`isSliceUninitialized()` method, and relied on the Base class to do so. However,
since we're not using `virtual` methods, the base class was using
`Base::read()` (which always returns 0) rather than `AVREEPROM::read()`, so
`isSliceUninitialized()` always returned false.
To fix this, we implement the function in `AVREEPROM`, and let the default
implementation in Base always return false.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This plugin provides a shared virtual keys array used by Macros and
DynamicMacros, along with some functions to interact with it (`press()`,
`release()`, `tap()`, `clear()`).
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
The plugin was both more complex and less accurate than it could have been. For
simplicity, it used a weighted average, with each cycle getting twice the weight
of the previous one. As a result, the reported average really only took into
account the last three or four cycles. On a keyboard with LEDs, some cycles
take much longer than others because of relatively rare updates, so this could
lead to misleading results, with the "average" cycle time usually being reported
as lower than it really should have been, and occasionally much higher.
This new version computes an evenly-weighted mean cycle time for each interval,
and runs more efficiently, by dividing the total elapsed time by the number of
cycles that has passed since the last report, rather than computing the time for
each individual cycle.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
We'd like to be able to set the default LED mode via Focus, so it can be
configured via Chrysalis. However, we may not want auto-save, so make that
configurable too.
To preserve the EEPROM layout, the highest bit of the previous led mode index
setting was repurposed for the auto save setting. This lets us set the default
mode to anything between 0 and 126 (or 127, if auto save is turned off).
While there, we also add an `onNameQuery` handler, to make it easier for
Chrysalis to detect if the plugin is available.
This addresses the Kaleidoscope parts of keyboardio/Chrysalis#846.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Gergely Polonkai
Jesse Vincent
Gergely Nagy
Gergely Nagy
Michael Richters
iliana etaoin