Some users have pointed out that certain keys (in particular, `space` &
`backspace`) are inconvenient to require the minimum prior interval to make a
qukey resolve to a modifier (especially `shift`). We could blacklist those keys,
but it's hard to predict what they all might be. The problem is mainly one for
very fast typists, and therefore I expect it to show up when following the
"normal" printable keys, not often other keys.
This could also be made into a configurable list, but I'd prefer not to do so
unless there's serious demand for it, as Qukeys already has too many settings.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
Unintended modifiers are becoming an increasingly big problem among users of
Qukeys. This change adds yet another configuration option to prevent this from
happening while users are typing fast. It introduces a new requirement to make a
qukey eligible to become a qukey; a minimum amount of time that must pass
between the keypress event for a non-modifier key and the subsequent keypress
event of the qukey.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
Previously, we used index-ordering for layers, meaning, we looked keys up based
on the index of active layers. This turned out to be confusing, and in many
cases, limiting, since we couldn't easily shift to a lower layer from a higher
one. As such, index-ordering required careful planning of one's layers, and a
deeper understanding of the system.
This patch switches us to activation-ordering: the layer subsystem now keeps
track of the order in which layers are activated, and uses that order to look
keys up, instead of the index of layers. This makes it easier to understand how
the system works, and allows us to shift to lower layers too.
It does require a bit more resources, since we can't just store a bitmap of
active layers, but need 32 bytes to store the order. We still keep the bitmap,
to make `Layer.isActive()` fast: looking up a bit in the bitmap is more
efficient than walking the active layer array, and this function is often used
in cases where speed matters.
As a side effect of the switch, a number of methods were deprecated, and similar
ones with more appropriate names were introduced. See the updated `UPGRADING.md`
document for more details.
Plugins that used the deprecated methods were updated to use the new ones.
Fixes#857.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This change makes Qukeys require a certain minimum amount of time for a
key to be held before it is eligible to get its alternate (i.e. modifier)
value. This should help faster typists avoid unintended modifiers in the
output.
Signed-off-by: Michael Richters <gedankenexperimenter@gmail.com>
This adds a googletest-based test harness (with googletest pulled into
`testing/googletest`, so we have a fixed state of it), and a few test
cases that demonstrate its use.
Original work by Eric Paniagua in #898, with minor cleanups by Gergely
Nagy.
Signed-off-by: Eric Paniagua <epaniagua@google.com>
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Key masking was a bandaid, and we have better ways to achieve the same thing
now. All current users have been switched over to different methods now, so lets
deprecate the masking.
We only put the `DEPRECATED` label on the `maskKey` method, because the rest are
used internally too, and we do not want to emit warnings for those.
Fixes#884.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
To make their purpose clearer, rearrange our state: we now have the row-based
array on the top level, instead of every member being an array on its own. The
name of the state variable was changed to `matrix_state_`, to reflect its
purpose. This also allowed us to have its members be named `current`,
`previous`, `debouncer` and `masks`.
All devices using these APIs, and the documentation were updated accordingly.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This drops the now unused `ATMEGA32U4_KEYBOARD`, `ATMEGA32U4_DEVICE_PROPS`,
`ATMEGA_KEYSCANNER_PROPS`, `ATMEGA32U4_DEVICE`, `ATMEGA_KEYSCANNER_PROPS`, and
`ATMEGA_KEYSCANNER_BOILERPLATE` macros.
These were macros that made the code less verbose, but none of them were
future-proof, and all of them were pretty opaque. Using them did not help one to
understand the code.
All use of these have been changed to use the raw structures as-is, which is
more verbose, but much more extensible, and a whole lot clearer in intent
aswell.
Since these are not particularly user facing macros, I opted not to include them
in `UPGRADING.md`, and removed them without prior deprecation.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
In order to be able to access the devices as the at-seat user, without having to
fiddle with distro-specific permissions and groups, we need to tag it both
`uaccess` and `seat`, and have the rule sorted before the one that applies
permissions based on these tags. As such, the file had to be renamed as well.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Add a removal date for the removal of the `Key` property direct access, and also
document the deprecation of the HID facade, with the same removal date of the
old APIs.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This has been deprecated in March, 2019, has been a no-op since. While no
removal schedule was posted at the time, I believe it is safe to drop it now.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Originally scheduled for removal by mid-March. This also removes the similarly
deprecated named hardware object aliases.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This reverts commit c917acb8a1, because that
introduced breaking changes, and we want to address the problem in a different
way instead.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This introduces a new plugin - `FlashHelper` - to aid with firmware-assisted
flashing. During the flashing process, this plugin can temporarily disable the
`Prog` key.
Addresses the firmware part of keyboardio/Chrysalis#509.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
The new plugin exposes some layer control functions over Focus, to be able to
control layers from the host side.
Fixes#780.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
When setting the idle timeout to zero, stop checking for idleness, and never
turn the LEDs off. Setting the timeout to a higher value again will resume the
plugin's functionality.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
The old device API (`Hardware.h`, basically) along with some other related
symbols (`ROWS`, `COLS`, etc) were deprecated, they emit warnings, but not
removal date was set. Lets do that now.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
While we added the new APIs and the entry in UPGRADING.md last summer, a removal
date was never announced. Lets fix that now, and remove these in March.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Remove two entries from the ToC, which were removed. We do not explicitly list
items below "Removed APIs", and these two were moved there a while ago.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
OneShot has dropped the old stickability controls almost a year ago, and that's
already part of UPGRADING.md. Remove the note that they will be removed - they
already were.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
This adds `LEDControl.disable()` and `LEDControl.enable()` which disable and
enable LED operations, respectively. These are meant to replace the current
`LEDControl.paused` property (which is getting deprecated with this change), and
do some additional work on top of just disabling or re-enabling future updates
and sync. Namely, `disable()` will also turn LEDs off, while `enable()` will
refresh them all, too.
We also add a dedicated `Key_LEDToggle` key to disable/enable LEDs. This is
useful when one wants to turn LEDs off, without changing active LED mode to
`LEDOff`.
Signed-off-by: Gergely Nagy <algernon@keyboard.io>
Michael Richters
Romain Heller
Jesse Vincent
Graeme Geldenhuys
Gergely Nagy
Eric Paniagua
Eric Paniagua
tokencoder
Daniel Deutsch
Travis Northcutt