WDT is AVR specific, so it has a much better place in the hardware plugins. Move
it there, and call `KeyboardHardware.setup()` earlier, so it can call
`wdt_disable()` before all the other things it needs.
The delay after WDT disabling moves to the hardware plugin too.
Thanks to @wez and @obra for figuring out what to move where (see
keyboardio/Kaleidoscope#129).
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This is the smallest change to make Kaleidoscope compile for
nRF52 BLE boards.
https://github.com/wez/KaleidoscopeKeyboards
has more code and build machinery for my proof of concept for using
Kaleidoscope as the driver for a keyboard using the new nRF52 based
board from Adafruit.
Implements the `layer.on`, `layer.off`, and `layer.getState` commands, which can
be used to control the active layers from the host.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To be used in places where we have absolutely, positively no clue where a key
event came from, coordinate-wise.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of calling the `.write` method of `ConsumerControl`/`SystemControl`,
which registers the key, sends a report, then unregisters, and reports again,
just `.press` it when the key is pressed, as we did before.
However, since `.press` always sends a report, and so does `.releaseAll`, we
can't have it the same way we do for `Keyboard`. We need to explicitly release
the consumer/system key, when the triggering key is released too. Not doing so
makes the key stuck, as we never release it, and that will upset the operating
system very much.
With this patch, we do an explicit release when the key toggles off, and thus,
we support both holding the key, and allowing the OS to trigger repeat, and, the
key won't be stuck, either!
Fixes#120.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
We want to allow plugins to change how keys are looked up - or where they are
looked up from -, and for this, the way we do that final lookup from `keymaps`
or elsewhere, must be overrideable.
We do this by having a `getKey` function pointer in the `Layer_` class, which
defaults to `getKeyFromPROGMEM`. Any plugin, or sketch, can change where
`getKey` points to, and thereby change the way keys are looked up.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
If we want to allow plugins to implement EEPROM storage, it is best if we don't
do anything with EEPROM in the core firmware. As such, remove the
`Layer.defaultLayer` call from `Kaleidoscope.setup`.
With that gone, the `keymap_count` argument is obsolete, so drop it from
`Kaleidoscope.setup()` - but we keep an temporary `setup()` with the old arity,
so that plugins can be updated at a slower pace.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The `USE_PLUGINS()` macro is a clever hack, to make it seem like
`Kaleidoscope.use()` is type-safe. It pushes its arguments into an appropriately
typed array, so anything that does not fit the criteria, will trigger a compiler
error.
It then never uses the array, and passes the plugins over to
`Kaleidoscope.use`, adding the trailing `NULL`, making it even easier to
use.
Since the array this macro creates is never used, the compiler will
optimize it out fully. As such, by using this macro, we incur neither
any size penalties, nor any run-time penalties. Everything happens at
compile-time.
Fixes#100.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
To make things easier, just include the main header. It includes
everything else we need, and this way we do not need to cherry pick, nor
care if any of the other headers move, disappear, etc.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Having the hooks, and the hook methods in the Kaleidoscope object means
we don't have to litter the definitions of the arrays around, and that
the hooks are more tied to the object. We pollute the global namespace
less, and having them in the object means that the hook helper functions
will not be optimized out if not used within the Kaleidoscope repo.
All in all, this saves us about 56 bytes of code, allows us to remove
some hacks, and pulls things that are closely knit, closer together.
While there, also changed the name of the `custom_handler_t` and
`custom_loop_t` types to `eventHandlerHook` and `loopHook` (both under
the `Kaleidoscope_` class), to better reflect what they are for.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
The plugin.h header only defined the KaleidoscopePlugin class, and while
there was a reason it was separate from Kaleidoscope.h, that reason is
long gone. Merge it there, and remove any reference to plugin.h, as it
is not needed anymore.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Since we pre-fill the cached `keyMap` with the value of `DefaultLayer`, there is
no need to check that layer again, looking for a non-transparent key. Whatever
is there, will be used anyway.
This way we save a cycle for keys that are transparent everywhere but the
default layer.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
We fill the cached `keyMap` with the value of `DefaultLayer`, so if that is the
only layer active, then we can bail out early.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of going through all the active layers each time we are looking for a
key, whenever we switch layers, compute the effective keymap, and store the
indexes. This makes the lookup a considerably faster operation, and lookups
happen far more often than layer switching.
This comes at a cost of ROWS*COLS amount of memory, and a bit of code, but on
the flip side, the lookup operation is now O(1), which is a very nice property
to have, if you want responsiveness. Changing layers is marginally slower,
however, but even with 32 active layers, doing the computation once, instead of
potentially many dozens of time, is still worth it.
We could further reduce the memory requirements if we stored more columns per
byte, but that's for a future optimization.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Instead of always iterating through all layers, which slows us down
considerably, keep track of the highest active one, and start from there.
This has a VERY noticeable impact on the speed at which we finish a scan cycle.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Momentary layer switchers were broken, because they had the flags/keyCode parts
swapped. Apparently, I missed these when swapping the rest.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
It had the COLS & ROWS defines, which are hardware-specific, and were moved to
the hardware lib.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Moved all of the hardware-specific code to a separate library. As such, use the
special `KEYBOARDIO_HARDWARE_H` define to include the appropriate header, as set
by the board's `boards.txt`.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
All of the plugins have been updated, there is no need to keep the deprecated
functions around anymore.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When toggling a layer, the same keycode should toggle the layer off, too.
Without this, toggling layers won't work at all, because the target layer will
never be turned off.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Jesse Vincent
Jesse Vincent
Wez Furlong
Gergely Nagy