kaleidoscope-builder: Remove extraneous whitespace

Drop a bunch of empty lines, trailing spaces, and similar things.

Signed-off-by: Gergely Nagy <algernon@keyboard.io>
pull/264/head
Gergely Nagy 7 years ago
parent 7a423ced8b
commit a2cee84455

@ -1,4 +1,4 @@
#!/usr/bin/env perl
#!/usr/bin/env perl
use warnings;
use strict;
@ -17,17 +17,14 @@ for my $path (@paths) {
my ($key,$val) = split(/=/,$line,2);
$devices{$path}{$key} = $val;
}
if (($devices{$path}{'ID_VENDOR_ID'} == $vid) &&
if (($devices{$path}{'ID_VENDOR_ID'} == $vid) &&
($devices{$path}{'ID_MODEL_ID'} == $pid) ) {
if ($devices{$path}{'ID_MM_CANDIDATE'}) {
warn "Yikes. ModemManager wants to pwn your keyboard";
}
warn "Yikes. ModemManager wants to pwn your keyboard";
}
print $devices{$path}{DEVNAME};
exit(0);
print $devices{$path}{DEVNAME};
exit(0);
}
}

@ -2,7 +2,6 @@
set -e
######
###### Build and output configuration
######
@ -10,7 +9,7 @@ set -e
build_version () {
GIT_VERSION="$(cd $(find_sketch); git describe --abbrev=4 --dirty --always)"
LIB_VERSION="$(cd $(find_sketch); (grep version= ../../library.properties 2>/dev/null || echo version=0.0.0) | cut -d= -f2)-g${GIT_VERSION}"
BUILD_PATH="${BUILD_PATH:-$(mktemp -d 2>/dev/null || mktemp -d -t 'build')}"
OUTPUT_DIR="${OUTPUT_DIR:-output/${LIBRARY}}"
OUTPUT_PATH="${OUTPUT_PATH:-${SOURCEDIR}/${OUTPUT_DIR}}"
@ -23,17 +22,13 @@ build_filenames () {
ELF_FILE_PATH="${OUTPUT_PATH}/${OUTPUT_FILE_PREFIX}.elf"
}
firmware_size () {
if [ "${BOARD}" = "virtual" ]; then
echo "[Size not computed for virtual build]"
return
fi
## This is a terrible hack, please don't hurt me. - algernon
## This is a terrible hack, please don't hurt me. - algernon
MAX_PROG_SIZE=28672
@ -81,13 +76,11 @@ flash () {
sleep 3s
find_bootloader_ports
flash_over_usb || flash_over_usb
}
flash_over_usb () {
sleep 1s
${AVRDUDE} -q -q -C ${AVRDUDE_CONF} -p${MCU} -cavr109 -D -P ${DEVICE_PORT_BOOTLOADER} -b57600 "-Uflash:w:${HEX_FILE_PATH}:i"
}
flash_from_bootloader() {
@ -96,14 +89,12 @@ flash_from_bootloader() {
flash_over_usb || flash_over_usb
}
program() {
prepare_to_flash
flash_with_programmer
}
flash_with_programmer() {
${AVRDUDE} -v \
-C ${AVRDUDE_CONF} \
-p${MCU} \
@ -152,7 +143,7 @@ compile () {
ARDUINO_PACKAGES=""
if [ -d ${ARDUINO_PACKAGE_PATH} ]; then
ARDUINO_PACKAGES="-hardware \"${ARDUINO_PACKAGE_PATH}\""
ARDUINO_PACKAGES="-hardware \"${ARDUINO_PACKAGE_PATH}\""
fi
${ARDUINO_BUILDER} \
@ -238,9 +229,9 @@ clean () {
}
reset_device() {
find_device_port
check_device_port
reset_device_cmd
find_device_port
check_device_port
reset_device_cmd
}
check_device_port () {
@ -254,7 +245,6 @@ check_device_port () {
fi
}
usage () {
cat <<EOF
Usage: $0 SKETCH commands...
@ -327,7 +317,6 @@ if [ -e "${SOURCEDIR}/kaleidoscope-builder.conf" ]; then
. "${SOURCEDIR}/kaleidoscope-builder.conf"
fi
. ${ROOT}/etc/kaleidoscope-builder.conf
if [ ! -z "${VERBOSE}" ] && [ "${VERBOSE}" -gt 0 ]; then
@ -336,7 +325,6 @@ else
ARDUINO_VERBOSE="-quiet"
fi
cmds=""
## Export vars

@ -4,8 +4,6 @@
SKETCH="${SKETCH:-${DEFAULT_SKETCH}}"
LIBRARY="${LIBRARY:-${SKETCH}}"
########
######## Keyboard hardware definitions
########
@ -18,12 +16,10 @@ else
FQBN="${FQBN:-keyboardio:avr:${BOARD}}"
fi
########
######## Host OS specific commands
########
## Platform-specific overrides
# Shamelessly stolen from git's Makefile
uname_S=$(uname -s 2>/dev/null || echo not)
@ -48,55 +44,46 @@ find_device_port() {
DEVICE_PORT="$(perl ${DEVICE_PORT_PROBER} ${VID} ${SKETCH_PID})"
}
reset_device_cmd() {
stty -F ${DEVICE_PORT} 1200 hupcl
}
MD5="md5sum"
find_bootloader_ports() {
find_device_vid_pid
DIR=$(dirname "$(readlink -f "$0")")
DEVICE_PORT_PROBER="${DIR}/find-device-port-linux-udev"
DEVICE_PORT_BOOTLOADER="$(perl ${DEVICE_PORT_PROBER} ${VID} ${BOOTLOADER_PID})"
}
MD5="md5sum"
if [ "${uname_S}" = "Darwin" ]; then
find_device_port() {
DEVICE_PORT="$(ls /dev/cu.usbmodemkbio* 2> /dev/null || echo '')"
DEVICE_PORT="${DEVICE_PORT:-$(ls /dev/cu.usbmodemCkbio* 2> /dev/null || echo '')}"
DEVICE_PORT="${DEVICE_PORT:-$(ls /dev/cu.usbmodemHID* 2> /dev/null || echo '')}"
DEVICE_PORT="${DEVICE_PORT:-$(ls /dev/cu.usbmodemCHID* 2> /dev/null || echo '')}"
DEVICE_PORT="${DEVICE_PORT:-$(ls /dev/cu.usbmodem14* 2> /dev/null || echo '')}"
}
find_device_port() {
DEVICE_PORT="$(ls /dev/cu.usbmodemkbio* 2> /dev/null || echo '')"
DEVICE_PORT="${DEVICE_PORT:-$(ls /dev/cu.usbmodemCkbio* 2> /dev/null || echo '')}"
DEVICE_PORT="${DEVICE_PORT:-$(ls /dev/cu.usbmodemHID* 2> /dev/null || echo '')}"
DEVICE_PORT="${DEVICE_PORT:-$(ls /dev/cu.usbmodemCHID* 2> /dev/null || echo '')}"
DEVICE_PORT="${DEVICE_PORT:-$(ls /dev/cu.usbmodem14* 2> /dev/null || echo '')}"
}
reset_device_cmd() {
/bin/stty -f ${DEVICE_PORT} 1200
}
reset_device_cmd() {
/bin/stty -f ${DEVICE_PORT} 1200
}
ARDUINO_PATH="${ARDUINO_PATH:-/Applications/Arduino.app/Contents/Java/}"
ARDUINO_PACKAGE_PATH="${ARDUINO_PACKAGE_PATH:-${HOME}/Library/Arduino15/packages}"
ARDUINO_LOCAL_LIB_PATH="${ARDUINO_LOCAL_LIB_PATH:-${HOME}/Documents/Arduino}"
ARDUINO_PATH="${ARDUINO_PATH:-/Applications/Arduino.app/Contents/Java/}"
ARDUINO_PACKAGE_PATH="${ARDUINO_PACKAGE_PATH:-${HOME}/Library/Arduino15/packages}"
ARDUINO_LOCAL_LIB_PATH="${ARDUINO_LOCAL_LIB_PATH:-${HOME}/Documents/Arduino}"
MD5="md5"
MD5="md5"
find_bootloader_ports() {
DEVICE_PORT_BOOTLOADER="$(ls /dev/cu.usbmodemkbio* 2> /dev/null || echo '')"
DEVICE_PORT_BOOTLOADER="${DEVICE_PORT_BOOTLOADER:-$(ls /dev/cu.usbmodem14* 2> /dev/null || echo '')}"
}
find_bootloader_ports() {
DEVICE_PORT_BOOTLOADER="$(ls /dev/cu.usbmodemkbio* 2> /dev/null || echo '')"
DEVICE_PORT_BOOTLOADER="${DEVICE_PORT_BOOTLOADER:-$(ls /dev/cu.usbmodem14* 2> /dev/null || echo '')}"
}
fi
######
###### Arduino tools configuration
######
@ -119,17 +106,13 @@ AVR_OBJDUMP="${AVR_OBJDUMP:-${ARDUINO_TOOLS_PATH}/avr/bin/avr-objdump}"
AVRDUDE="${AVRDUDE:-${ARDUINO_TOOLS_PATH}/avr/bin/avrdude}"
AVRDUDE_CONF="${AVRDUDE_CONF:-${ARDUINO_TOOLS_PATH}/avr/etc/avrdude.conf}"
######
###### Source files and dependencies
######
BOARD_HARDWARE_PATH="${BOARD_HARDWARE_PATH:-${ARDUINO_LOCAL_LIB_PATH}/hardware}"
BOOTLOADER_PATH="${BOOTLOADER_PATH:-${BOARD_HARDWARE_PATH}/keyboardio/avr/bootloaders/caterina/Caterina.hex}"
if [ ! -z "${ARDUINO_TOOLS_PATH}" ]; then
ARDUINO_TOOLS_PARAM="-tools ${ARDUINO_TOOLS_PATH}"
fi
@ -137,4 +120,3 @@ fi
if [ ! -z "${AVR_GCC_PREFIX}" ]; then
ARDUINO_AVR_GCC_PREFIX_PARAM="-prefs \"runtime.tools.avr-gcc.path=${AVR_GCC_PREFIX}\""
fi

Loading…
Cancel
Save