kaleidoscope-builder fixed for builds of virtual hardware

This commit induces the following changes:

bin/kaleidoscope-builder

  * ccache dummy compiler and executables are now generated in a way
    that allows using the same CCACHE_WRAPPER_PATH for virtual and
    non-virtual builds

  * virtual builds are now triggered by either specifying the full FQBN with x86
    as architecture or by defining ARCH=x86

etc/kaleidoscope-builder.conf

  * COMPILER_PREFIX and COMPILER_PATH are now determined (if not predefined)
    based on ARCH or FQBN

Signed-off-by: Florian Fleissner <florian.fleissner@inpartik.de>

bin/kaleidoscope-builder

@@ -58,23 +58,42 @@ build_filenames () {
 
 enable_ccache () {
     if  [ "$(command -v ccache)" ]; then
-    if ! [ -d "$CCACHE_WRAPPER_PATH" ]; then
-	mkdir -p "$CCACHE_WRAPPER_PATH"
-	ln -s "$(command -v ccache)" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}gcc"
-	ln -s "$(command -v ccache)" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}g++"
-	ln -s "${AVR_NM}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}nm"
-	ln -s "${AVR_OBJCOPY}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}objcopy"
-	ln -s "${AVR_AR}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}ar"
-	ln -s "${AVR_SIZE}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}size"
-    fi
-    export CCACHE_PATH=${COMPILER_PATH}/
-    CCACHE_ENABLE="-prefs compiler.path=${CCACHE_WRAPPER_PATH}/"
+      if ! [ -d "$CCACHE_WRAPPER_PATH" ]; then
+         mkdir -p "$CCACHE_WRAPPER_PATH"
+      fi
+      
+      if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}gcc" ]; then
+         ln -s "$(command -v ccache)" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}gcc"
+      fi
+      
+      if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}g++" ]; then
+         ln -s "$(command -v ccache)" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}g++"
+      fi
+      
+      if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}nm" ]; then
+         ln -s "${AVR_NM}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}nm"
+      fi
+      
+      if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}objcopy" ]; then
+         ln -s "${AVR_OBJCOPY}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}objcopy"
+      fi
+      
+      if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}ar" ]; then
+         ln -s "${AVR_AR}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}ar"
+      fi
+      
+      if ! [ -h "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}size" ]; then
+         ln -s "${AVR_SIZE}" "${CCACHE_WRAPPER_PATH}/${COMPILER_PREFIX}size"
+      fi
+    
+      export CCACHE_PATH=${COMPILER_PATH}/
+      CCACHE_ENABLE="-prefs compiler.path=${CCACHE_WRAPPER_PATH}/"
     fi
 }
 
 
 firmware_size () {
-    if [ "${BOARD}" = "virtual" ]; then
+    if [ "${ARCH}" = "x86" ]; then
         echo "[Size not computed for virtual build]"
         return
     fi
@@ -245,7 +264,7 @@ compile () {
         # We want literal backslashes here, not arrays.
 	      ARDUINO_PACKAGES="-hardware \"${ARDUINO_PACKAGE_PATH}\""
     fi
-
+    
     SAVED_BOARD="${BOARD}"
     SAVED_FQBN="${FQBN}"
     if [ -e "${SKETCH_DIR}/.kaleidoscope-builder.conf" ]; then
@@ -253,8 +272,12 @@ compile () {
         BOARD="$(. "${SKETCH_DIR}"/.kaleidoscope-builder.conf && echo "${BOARD}")"
         # shellcheck disable=SC1090
         FQBN="$(. "${SKETCH_DIR}"/.kaleidoscope-builder.conf && echo "${FQBN}")"
-        if [ "${SAVED_FQBN}" = "${FQBN}" ] || [ -z "${FQBN}" ]; then
-            FQBN="keyboardio:avr:${BOARD}"
+        if [ -n "${BOARD}" ]; then
+            if [ -z "${ARCH}" ]; then
+               FQBN="keyboardio:avr:${BOARD}"
+            else
+               FQBN="keyboardio:${ARCH}:${BOARD}"
+            fi
         fi
     fi
 

etc/kaleidoscope-builder.conf

@@ -12,10 +12,26 @@ LIBRARY="${LIBRARY:-${SKETCH}}"
 
 BOARD="${BOARD:-model01}"
 MCU="${MCU:-atmega32u4}"
-if [ "${BOARD}" = "virtual" ]; then
+
+if [ -z "${ARCH}" ]; then
+   ARCH=$(echo "${FQBN}" | sed -n -e 's/^[^:]\+:\([^:]\+\).*/\1/p')
+fi
+
+if [ "${ARCH}" = "x86" ]; then
     FQBN="${FQBN:-keyboardio:x86:${BOARD}}"
+    
+    # Set the compiler path for virtual builds (x86)
+    #
+    if [ -z "${COMPILER_PATH}" ]; then
+       COMPILER_PATH="/usr/bin"
+       COMPILER_PREFIX=""
+    fi
 else
-    FQBN="${FQBN:-keyboardio:avr:${BOARD}}"
+   ARCH="avr"
+fi
+
+if [ -z "${FQBN}" ]; then
+   FQBN="${FQBN:-keyboardio:avr:${BOARD}}"
 fi
 
 ########
@@ -141,9 +157,11 @@ ARDUINO_IDE_VERSION="10607"
 ###### Executable paths
 ######
 
+# Allow the compiler path to be empty for x86 builds
+COMPILER_PATH="${COMPILER_PATH-${ARDUINO_TOOLS_PATH}/avr/bin/}"
 
-COMPILER_PATH="${COMPILER_PATH:-${ARDUINO_TOOLS_PATH}/avr/bin/}"
-COMPILER_PREFIX="${COMPILER_PREFIX:-avr-}"
+# Allow the compiler prefix to be empty for x86 builds
+COMPILER_PREFIX="${COMPILER_PREFIX-avr-}"
 AVR_SIZE="${AVR_SIZE:-${COMPILER_PATH}/${COMPILER_PREFIX}size}"
 AVR_SIZE_FLAGS="${AVR_SIZE_FLAGS:--C --mcu=${MCU}}"
 AVR_OBJDUMP="${AVR_OBJDUMP:-${COMPILER_PATH}/${COMPILER_PREFIX}objdump}"