Merge pull request #1048 from gedankenexperimenter/doc/device-apis-corrections

Correct broken links and typos in `device-apis.md`
pull/1049/head
Jesse Vincent 3 years ago committed by GitHub
commit 3a9a9dd793
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

@ -27,13 +27,13 @@ amount of custom code one has to write will be minimal.
A `Device` is the topmost level component, it is the interface the rest of
Kaleidoscope will work with. The [`kaleidoscope::device::Base`][k:d:Base] class
is the ancestor of _all_ devices, everything derives from this. Devices that use
an `ATMega32U4` MCU we also have the
[`kaleidoscope::device::ATMega32U4Keyboard`][k:d:a32u4] class, which sets up
some of the components that is common to all `ATMega32U4`-based devices (such as
an `ATmega32U4` MCU we also have the
[`kaleidoscope::device::ATmega32U4Keyboard`][k:d:a32u4] class, which sets up
some of the components that is common to all `ATmega32U4`-based devices (such as
the _MCU_ and the _Storage_).
[k:d:Base]:../src/kaleidoscope/device/Base.h
[k:d:a32u4]: ../src/kaleidoscope/device/ATMega32U4.h
[k:d:Base]: ../../src/kaleidoscope/device/Base.h
[k:d:a32u4]: ../../src/kaleidoscope/device/ATmega32U4Keyboard.h
As hinted at above, a device - or rather, it's `Props` - describe the components
used for the device, such as the MCU, the Bootloader, the Storage driver, LEDs,
@ -42,7 +42,7 @@ in `Props` - the defaults are all no-ops.
All devices must also come with a `Props` struct, deriving from [`kaleidoscope::device::BaseProps`][k:d:BaseProps].
[k:d:BaseProps]: ../src/kaleidoscope/device/Base.h
[k:d:BaseProps]: ../../src/kaleidoscope/device/Base.h
As an example, the most basic device we can have, that does nothing, would look
like this:
@ -66,16 +66,16 @@ components the device ends up using.
The heart of any device will be the main controller unit, or _MCU_ for short.
The [`kaleidoscope::driver::mcu::Base`][k:d:m:Base] class is the ancestor of our
MCU drivers, including [`mcu::ATMega32U4`][k:d:m:a32u4].
MCU drivers, including [`kaleidoscope::driver::mcu::ATmega32U4`][k:d:m:a32u4].
[k:d:m:Base]: ../src/kaleidoscope/driver/mcu/Base.h
[k:d:m:a32u4]: ../src/kaleidoscope/driver/mcu/ATMega32U4.h
[k:d:m:Base]: ../../src/kaleidoscope/driver/mcu/Base.h
[k:d:m:a32u4]: ../../src/kaleidoscope/driver/mcu/ATmega32U4.h
The core firmware will use the `detachFromHost()` and `attachToHost()` methods
of the MCU driver, along with `setup()`, but the driver - like any other
driver - is free to have other methods, to be used by individual devices.
For example, the [`ATMega32U4`][k:d:m:a32u4] driver implements a `disableJTAG()`
For example, the [`ATmega32U4`][k:d:m:a32u4] driver implements a `disableJTAG()`
and a `disableClockDivision()` method, which some of our devices use in their
constructors.
@ -88,16 +88,16 @@ thing that allows us to re-program the keyboard without additional hardware
(aptly called a programmer). As such, the [`base class`][k:d:b:Base] has a
single method, `rebootBootloader()`, which our bootloader components implement.
[k:d:b:Base]: ../src/kaleidoscope/bootloader/Base.h
[k:d:b:Base]: ../../src/kaleidoscope/driver/bootloader/Base.h
Kaleidoscope currently supports [`Catalina`][k:d:b:Catalina],
Kaleidoscope currently supports [`Caterina`][k:d:b:Caterina],
[`HalfKay`][k:d:b:HalfKay], and [`FLIP`][k:d:b:FLIP] bootloaders. Please consult
them for more information. In many cases, setting up the bootloader in the
device props is all one needs to do.
[k:d:b:Catalina]: ../src/kaleidoscope/driver/bootloader/avr/Catalina.h
[k:d:b:HalfKay]: ../src/kaleidoscope/driver/bootloader/avr/HalfKay.h
[k:d:b:FLIP]: ../src/kaleidoscope/driver/bootloader/avr/FLIP.h
[k:d:b:Caterina]: ../../src/kaleidoscope/driver/bootloader/avr/Caterina.h
[k:d:b:HalfKay]: ../../src/kaleidoscope/driver/bootloader/avr/HalfKay.h
[k:d:b:FLIP]: ../../src/kaleidoscope/driver/bootloader/avr/FLIP.h
Like the _MCU_ component, the _bootloader_ does not use Props, either.
@ -113,40 +113,40 @@ to flash new firmware.
The Storage API resembles the Arduino EEPROM API very closely. In fact, our
[`AVREEPROM`][k:d:s:AVREEPROM] class is but a thin wrapper around that!
[k:d:s:Base]: ../src/kaleidoscope/driver/storage/Base.h
[k:d:s:Base]: ../../src/kaleidoscope/driver/storage/Base.h
[chrysalis]: https://github.com/keyboardio/Chrysalis
[k:d:s:AVREEPROM]: ../src/kaleidoscope/driver/storage/AVREEPROM.h
[k:d:s:AVREEPROM]: ../../src/kaleidoscope/driver/storage/AVREEPROM.h
The `Storage` component does use Props, one that describes the length - or
size - of it. We provide an [`ATMega32U4EEPROMProps`][k:d:s:a32u4props] helper,
which is preconfigured for the 1k EEPROM size of the ATMega32U4.
size - of it. We provide an [`ATmega32U4EEPROMProps`][k:d:s:a32u4props] helper,
which is preconfigured for the 1k EEPROM size of the ATmega32U4.
[k:d:s:a32u4props]: ../src/kaleidoscope/driver/storage/ATMega32U4EEPROMProps.h
[k:d:s:a32u4props]: ../../src/kaleidoscope/driver/storage/ATmega32U4EEPROMProps.h
### LEDs
[`kaleidoscope::driver::led::Base`][k:d:l:Base]
[k:d:l:Base]: ../src/kaleidoscope/driver/led/Base.h
[k:d:l:Base]: ../../src/kaleidoscope/driver/led/Base.h
### Keyscanner
[`kaleidoscope::driver::keyscanner::Base`][k:d:ks:Base]
[k:d:ks:Base]: ../src/kaleidoscope/driver/keyscanner/Base.h
[k:d:ks:Base]: ../../src/kaleidoscope/driver/keyscanner/Base.h
## Helpers
[`kaleidoscope::device::ATMega32U4Keyboard`][k:d:a32u4k]
[`kaleidoscope::driver::keyscanner::AVR`][k:d:ks:avr]
[`kaleidoscope::device::ATmega32U4Keyboard`][k:d:a32u4k]
[`kaleidoscope::driver::keyscanner::ATmega`][k:d:ks:atm]
[k:d:a32u4k]: ../src/kaleidoscope/device/ATMega32U4Keyboard.h
[k:d:ks:avr]: ../src/kaleidoscope/driver/keyscanner/AVR.h
[k:d:a32u4k]: ../../src/kaleidoscope/device/ATmega32U4Keyboard.h
[k:d:ks:atm]: ../../src/kaleidoscope/driver/keyscanner/ATmega.h
## Putting it all together
To put things into perspective, and show a simple example, we'll build an
imaginary mini keypad: `ATMega32U4` with `Caterina` as bootloader, no LEDs, and
imaginary mini keypad: `ATmega32U4` with `Caterina` as bootloader, no LEDs, and
four keys only.
### `ImaginaryKeypad.h`
@ -157,9 +157,9 @@ four keys only.
#ifdef ARDUINO_AVR_IMAGINARY_KEYPAD
#include <Arduino.h>
#include "kaleidoscope/driver/keyscanner/AVR.h"
#include "kaleidoscope/driver/keyscanner/ATmega.h"
#include "kaleidoscope/driver/bootloader/avr/Caterina.h"
#include "kaleidoscope/device/ATMega32U4Keyboard.h"
#include "kaleidoscope/device/ATmega32U4Keyboard.h"
namespace kaleidoscope {
namespace device {

Loading…
Cancel
Save