You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Kaleidoscope/doc/plugin/OneShot.md

189 lines
6.2 KiB

# Kaleidoscope-OneShot
One-shots are a new kind of behaviour for your standard modifier and momentary
layer keys: instead of having to hold them while pressing other keys, they can
be tapped and released, and will remain active until any other key is pressed.
In short, they turn `Shift, A` into `Shift+A`, and `Fn, 1` to `Fn+1`. The main
advantage is that this allows us to place the modifiers and layer keys to
positions that would otherwise be awkward when chording. Nevertheless, they
still act as normal when held, that behaviour is not lost.
Furthermore, if a one-shot key is tapped two times in quick succession, it
becomes sticky, and remains active until disabled with a third tap. This can be
useful when one needs to input a number of keys with the modifier or layer
active, and still does not wish to hold the key down. If this feature is
undesirable, unset the `OneShot.double_tap_sticky` property (see later).
To make multi-modifier, or multi-layer shortcuts possible, one-shot keys remain
active if another one-shot of the same type is tapped, so `Ctrl, Alt, b` becomes
`Ctrl+Alt+b`, and `L1, L2, c` is turned into `L1+L2+c`. Furthermore, modifiers
and other layer keys do not cancel the one-shot effect, either.
## Using One-Shot Keys
To enter one-shot mode, tap _quickly_ on a one-shot key. The next
normal (non-one-shot) key you press will have the modifier applied,
and then the modifier will automatically turn off. If the Shift key is
a one-shot modifier, then hitting `Shift, a, b` will give you `Ab`,
_if you hit shift quickly._
Longish keypresses do not activate one-shot mode. If you press `Shift,
a, b`, as above, but hold the Shift key a bit longer, you'll get `ab`.
To enter sticky mode, _tap twice quickly_ on a one-shot key. The
modifier will now stay on until you press it again. Continuing the
`Shift` example, tapping `Shift, Shift` _quickly_ and then `a, b, c,
Shift, d, e, f` will give you `ABCdef`.
This can be a bit tricky; combining this plugin with
[LED-ActiveModColor](LED-ActiveModColor.md)
will help you understand what state your one-shot is in; when a
one-shot key is active, it will have a white LED highlight; when
sticky, a red highlight.
## Using the plugin
After adding one-shot keys to the keymap, all one needs to do, is enable the
plugin:
```c++
#include <Kaleidoscope.h>
#include <Kaleidoscope-OneShot.h>
#include <kaleidoscope/hid.h>
// somewhere in the keymap...
OSM(LeftControl), OSL(_FN)
KALEIDOSCOPE_INIT_PLUGINS(OneShot);
void setup() {
Kaleidoscope.setup();
}
```
## Keymap markup
There are two macros the plugin provides:
### `OSM(mod)`
> A macro that takes a single argument, the name of the modifier: `LeftControl`,
> `LeftShift`, `LeftAlt`, `LeftGui` or their right-side variant. When marked up
> with this macro, the modifier will act as a one-shot modifier.
### `OSL(layer)`
> Takes a layer number as argument, and sets up the key to act as a one-shot
> layer key.
>
> Please note that while `Kaleidoscope` supports more, one-shot layers are
> limited to 8 layers only.
## Plugin methods
The plugin provides one object, `OneShot`, which implements both one-shot
modifiers and one-shot layer keys. It has the following methods:
### `.isActive()`
> Returns if any one-shot key is in flight. This makes it possible to
> differentiate between having a modifier or layer active, versus having them
> active only until after the next key getting pressed. And this, in turn, is
> useful for macros that need to fiddle with either modifier or layer state: if
> one-shots are not active, they need not restore the original state.
### `.isPressed()`
> Returns true if any one-shot key is still held.
### `.isSticky(key)`
> Returns if the key is currently sticky.
### `.isModifierActive(key)`
> Returns if the modifier `key` has a one-shot state active. Use this together
> with `hid::isModifierKeyActive` to catch cases where a one-shot modifier is
> active, but not registered yet.
### `.cancel([with_stickies])`
> The `cancel()` method can be used to cancel any pending one-shot effects,
> useful when one changed their minds, and does not wish to wait for the
> timeout.
>
> The optional `with_stickies` argument, if set to `true`, will also cancel
> sticky one-shot effects. If omitted, it defaults to `false`, and not canceling
> stickies.
### `.inject(key, keyState)`
> Simulates a key event, specifically designed to inject one-shot keys into the
> event loop. The primary purpose of this method is to make it easier to trigger
> multiple one-shots at the same time.
>
> See the example sketch for more information about its use.
## Plugin properties
Along with the methods listed above, the `OneShot` object has the following
properties too:
### `.time_out`
> Set this property to the number of milliseconds to wait before timing out and
> cancelling the one-shot effect (unless interrupted or cancelled before by any
> other means).
>
> Defaults to 2500.
### `.hold_time_out`
> Set this property to the number of milliseconds to wait before considering a
> held one-shot key as intentionally held. In this case, the one-shot effect
> will not trigger when the key is released. In other words, holding a one-shot
> key at least this long, and then releasing it, will not trigger the one-shot
> effect.
>
> Defaults to 200.
### `.double_tap_sticky`
> Set this boolean property to make the plugin treat a double-tap of a one-shot
> key as making it sticky until a third tap. Setting it to `false` disables this
> behaviour, in which case double-tapping a one-shot modifier will just restart
> the timer.
>
> Defaults to `true`.
### `.double_tap_sticky_layers`
> The same as `.double_tap_sticky`, but only applies to layers. The two can be
> set separately.
>
> Defaults to `true`.
### `.double_tap_time_out`
> Set this property to the number of milliseconds within which a second
> uninterrupted tap of the same one-shot key will be treated as a sticky-tap.
> Only takes effect when `.double_tap_sticky` is set.
>
>
> Setting the property to `-1` will make the double-tap timeout use `.time_out`
> for its calculations.
>
> Defaults to -1.
## Dependencies
* [Kaleidoscope-Ranges](Ranges.md)
## Further reading
Starting from the [example][plugin:example] is the recommended way of getting
started with the plugin.
[plugin:example]: ../../examples/OneShot/OneShot.ino