You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Kaleidoscope/implementation/Model01.cpp

151 lines
3.4 KiB

#include <Arduino.h>
#include "WS2812.h"
#include "Model01.h"
sx1509Class Model01_::leftsx1509(LEFT_SX1509_ADDRESS);
sx1509Class Model01_::rightsx1509(RIGHT_SX1509_ADDRESS);
WS2812 Model01_::LED(LED_COUNT);
Model01_::Model01_(void) {
}
void Model01_::leds_setup() {
LED.setOutput(LED_DATA_PIN);
LED.setColorOrderGRB(); // Uncomment for RGB color order
}
void Model01_::led_set_crgb_at(byte row, byte col, cRGB color) {
LED.set_crgb_at(key_led_map[row][col], color);
}
cRGB Model01_::get_key_color(byte row, byte col) {
return LED.get_crgb_at(key_led_map[row][col]);
}
void Model01_::led_set_crgb_at(uint8_t i, cRGB crgb) {
LED.set_crgb_at(i, crgb);
}
void Model01_::led_sync() {
LED.sync();
}
void Model01_::scan_row(byte row) {
if (left_initted) {
leftsx1509.updatePinState(left_rowpins[row], LOW);
leftsx1509.sendPinStates();
leftsx1509.fetchPinStates();
}
if (right_initted) {
rightsx1509.updatePinState(right_rowpins[row], LOW);
rightsx1509.sendPinStates();
rightsx1509.fetchPinStates();
}
}
void Model01_::finish_scanning_row(byte row) {
if (left_initted)
leftsx1509.updatePinState(left_rowpins[row], HIGH);
if (right_initted)
rightsx1509.updatePinState(right_rowpins[row], HIGH);
}
void Model01_::scan_left_col(byte row, byte col,uint8_t *state) {
//If we see an electrical connection on I->J,
*state <<= 1;
if (left_initted && leftsx1509.readPrefetchedPin(left_colpins[col])) {
*state |= 0;
} else {
*state |= 1;
}
}
void Model01_::scan_right_col(byte row, byte col, uint8_t *state) {
//If we see an electrical connection on I->J,
*state <<= 1;
if (right_initted && rightsx1509.readPrefetchedPin(right_colpins[col])) {
*state |= 0;
} else {
*state |= 1;
}
}
boolean Model01_::right_hand_connected(void) {
if (right_initted) {
return true;
} else {
return false;
}
}
void Model01_::pins_setup() {
right_initted = setup_sx1509(rightsx1509, right_colpins, right_rowpins);
left_initted = setup_sx1509(leftsx1509, left_colpins, left_rowpins);
rightsx1509.fetchPinStates();
}
void Model01_::make_input(sx1509Class sx1509, uint8_t pin) {
sx1509.pinDir(pin, INPUT); // Set SX1509 pin 1 as an input
sx1509.writePin(pin, HIGH); // Activate pull-up
}
void Model01_::make_output(sx1509Class sx1509, uint8_t pin) {
sx1509.pinDir(pin, OUTPUT);
sx1509.writePin(pin, HIGH);
}
int Model01_::setup_sx1509 (sx1509Class sx1509, uint8_t colpins[], uint8_t rowpins[]) {
byte initted;
for (int counter = 0; counter < 10; counter++) {
initted = sx1509.init();
if (initted)
break;
}
if (initted) { // init ok
// In order to use the keypad, the clock must first be
// configured. We can call configureClock() with the default
// parameters (2MHz internal oscillator, no clock in/out).
sx1509.configClock();
// the debounceConfig function sets the debounce time. This
// function's parameter should be a 3-bit value.
// 3: 4ms * 2MHz/fOSC
sx1509.debounceConfig(4);
for (int i = 0; i < LEFT_ROWS; i++) {
make_output(sx1509, rowpins[i]);
}
for (int j = 0; j < LEFT_COLS; j++) {
make_input(sx1509, colpins[j]);
sx1509.debounceEnable(colpins[j]);
}
}
return initted;
}