Kaleidoscope/tools/kaleidoscope-builder

#! /bin/sh

set -e

firmware_size () {
	## This is a terrible hack, please don't hurt me. - algernon

	MAX_PROG_SIZE=28672

	output="$($@ | grep "\\(Program\\|Data\\):" | sed -e 's,^,  - ,' && echo)"

	PROGSIZE="$(echo "${output}" | grep Program: | cut -d: -f2 | awk '{print $1}')"

  PERCENT="$(echo ${PROGSIZE} ${MAX_PROG_SIZE} | awk "{ printf \"%02.01f\", \$1 / \$2 * 100 }")"

	echo "${output}" | sed -e "s,\(Program:.*\)(\([0-9\.]*%\) Full),\1(${PERCENT}% Full),"
}

find_sketch () {
    SKETCH="${SKETCH:-${DEFAULT_SKETCH}}"
    LIBRARY="${LIBRARY:-${SKETCH}}"

    for path in "hardware/keyboardio/avr/libraries/Kaleidoscope-${LIBRARY}/examples/${SKETCH}" \
                    "examples/${LIBRARY}" \
                    "src" \
		    "."; do
        if [ -f "${path}/${SKETCH}.ino" ]; then
            echo "${path}"
            return
        fi
    done
    exit 1
}

prepare_to_flash () {
    if [ ! -e "${HEX_FILE_PATH}" ]; then
        compile
    fi

    echo "Press ENTER when ready..."
    read a
}

flash () {
    prepare_to_flash
    reset_device
    sleep 3s
    flash_over_usb

}

flash_over_usb () {
    avrdude -q -q -p${MCU} -cavr109 -D -P ${DEVICE_PORT_BOOTLOADER} -b57600 "-Uflash:w:${HEX_FILE_PATH}:i"

}

program() {
    prepare_to_flash
    flash_with_programmer
}

flash_with_programmer() {

    avrdude -v \
		        -p${MCU} \
		        -cusbtiny \
		        -D \
		        -B 1 \
		        "-Uflash:w:${HEX_FILE_PATH}:i"
}

hex_with_bootloader () {
    if [ ! -e "${HEX_FILE_PATH}" ]; then
        compile
    fi

	  cat ${HEX_FILE_PATH} | awk '/^:00000001FF/ == 0' > ${HEX_FILE_WITH_BOOTLOADER_PATH}
	  echo "Using ${BOOTLOADER_PATH}"
	  ${MD5} ${BOOTLOADER_PATH}
	  cat ${BOOTLOADER_PATH} >> ${HEX_FILE_WITH_BOOTLOADER_PATH}
    cat <<EOF

Combined firmware and bootloader are now at ${HEX_FILE_WITH_BOOTLOADER_PATH}
Make sure you have the bootloader version you expect.

And TEST THIS ON REAL HARDWARE BEFORE YOU GIVE IT TO ANYONE

EOF
}

build () {
    compile $@
    size $@
}

compile () {
    install -d "${OUTPUT_PATH}"

    echo "Building ${OUTPUT_DIR}/${SKETCH} (${LIB_VERSION}) ..."

    ${compile_HOOKS}

    if [ -d "${ARDUINO_LOCAL_LIB_PATH}/libraries" ]; then
        local_LIBS="-libraries \"${ARDUINO_LOCAL_LIB_PATH}/libraries\""
    fi

    ${ARDUINO_BUILDER} \
        -compile \
		    -hardware "${ARDUINO_PATH}/hardware" \
		    -hardware "${BOARD_HARDWARE_PATH}" \
		    ${ARDUINO_TOOLS_PARAM} \
		    -tools "${ARDUINO_PATH}/tools-builder" \
		    -fqbn "${FQBN}" \
        ${local_LIBS} \
		    -libraries "${BOARD_HARDWARE_PATH}/.." \
        -libraries "${ROOT}" \
        -libraries "." \
		    ${EXTRA_BUILDER_ARGS} \
		    -build-path "${BUILD_PATH}" \
		    -ide-version "${ARDUINO_IDE_VERSION}" \
		    -warnings all \
        ${ARDUINO_VERBOSE} \
		    -prefs "compiler.cpp.extra_flags=-std=c++11 -Woverloaded-virtual -Wno-unused-parameter -Wno-unused-variable -Wno-ignored-qualifiers" \
		    ${ARDUINO_AVR_GCC_PREFIX_PARAM} \
		    "$(find_sketch)/${SKETCH}.ino"

    cp "${BUILD_PATH}/${SKETCH}.ino.hex" "${HEX_FILE_PATH}"
    cp "${BUILD_PATH}/${SKETCH}.ino.elf" "${ELF_FILE_PATH}"
    ln -sf "${OUTPUT_FILE_PREFIX}.hex" "${OUTPUT_PATH}/${SKETCH}-latest.hex"
    ln -sf "${OUTPUT_FILE_PREFIX}.elf" "${OUTPUT_PATH}/${SKETCH}-latest.elf"
	  rm -rf "${BUILD_PATH}"
}

_find_all () {
    for plugin in hardware/keyboardio/avr/libraries/Kaleidoscope-*/examples/* \
                      examples/* \
                      src/*.ino; do
        if [ -d "$(dirname ${plugin})" ] || [ -f "${plugin}" ]; then
            p="$(basename "${plugin}" .ino)"
            if [ "${p}" != '*' ]; then
                echo "${p}"
            fi
        fi
    done | sort
}

build_all () {
    plugins="$(_find_all)"

    for plugin in ${plugins}; do
        export SKETCH="${plugin}"
        export LIBRARY="${plugin}"
        $0 ${plugin} build
    done
}

size () {
    if [ ! -e "${HEX_FILE_PATH}" ]; then
        compile
    fi

	  echo "- Size: firmware/${LIBRARY}/${OUTPUT_FILE_PREFIX}.elf"
	  firmware_size "${AVR_SIZE}" -C --mcu="${MCU}" "${ELF_FILE_PATH}"
	  echo
}

size_map () {
    if [ ! -e "${HEX_FILE_PATH}" ]; then
        compile
    fi

    "${AVR_NM}" --size-sort -C -r -l "${ELF_FILE_PATH}"
}

decompile () {

    if [ ! -e "${HEX_FILE_PATH}" ]; then
        compile
    fi

    "${AVR_OBJDUMP}" -d "${ELF_FILE_PATH}"
}

clean () {
    rm -rf "${OUTPUT_PATH}"
}

reset_device () {
    ${RESET_DEVICE}
}

usage () {
    cat <<EOF
Usage: $0 SKETCH commands...

Runs all of the commands in the context of the Sketch.

Available commands:

  help
    This help screen.

  compile
    Compiles the sketch.

  size
    Reports the size of the compiled sketch.

  build
    Runs compile and report-size.

  clean
    Cleans up the output directory.

  size-map
    Displays the size map for the sketch.

  decomple
    Decompile the sketch.

  reset-device
    Reset the device.

  flash
    Flashes the firmware using avrdude.

  build-all
    Build all Sketches we can find.
EOF
}

help () {
    usage
}

if [ $# -lt 1 ]; then
    usage
    exit 1
fi

## Parse the command-line
##  - anything that has a =, is an env var
##  - from the remaining stuff, the first one is the Library/Sketch
##  - everything else are commands
##
##  - if there is only one argument, that's a command

ROOT="$(cd $(dirname $0)/..; pwd)"
export ROOT
export SOURCEDIR="$(pwd)"

if [ -e "${HOME}/.kaleidoscope-builder.conf" ]; then
    . "${HOME}/.kaleidoscope-builder.conf"
fi

if [ -e "${SOURCEDIR}/.kaleidoscope-builder.conf" ]; then
    . "${SOURCEDIR}/.kaleidoscope-builder.conf"
fi

if [ -e "${SOURCEDIR}/kaleidoscope-builder.conf" ]; then
    . "${SOURCEDIR}/kaleidoscope-builder.conf"
fi


. ${ROOT}/tools/kaleidoscope-builder.conf


cmds=""

## Export vars
for i in $(seq 1 $#); do
    v="$1"
    shift

    case "${v}" in
        *=*)
            export ${v}
            ;;
        *)
            cmds="${cmds} ${v}"
            ;;
    esac
done

set -- ${cmds}

if [ $# -eq 1 ]; then
    cmd="$(echo $1 | tr '-' '_')"
    ${cmd}
    exit $?
fi

SKETCH="$1"
shift

if [ "${SKETCH}" = "default" ]; then
    SKETCH="${DEFAULT_SKETCH}"
fi

cmds=""

for i in $(seq 1 $#); do
    cmds="${cmds} $(echo $1 | tr '-' '_')"
    shift
done

LIBRARY="${SKETCH}"

export SKETCH
export LIBRARY

for cmd in ${cmds}; do
    ${cmd}
done