|
|
|
|
# Technomancy Atreus
|
|
|
|
|
|
|
|
|
|
This is a plugin for [Kaleidoscope][fw], that adds hardware support for the
|
|
|
|
|
[Atreus][atreus]. Supports both the pre- and post-2016 variants with an A* MCU,
|
|
|
|
|
the hand-wired variant from [FalbaTech][falba] with a Teensy2, and the legacy
|
|
|
|
|
teensy2 variant too.
|
|
|
|
|
|
|
|
|
|
To select which one to build for, you can either use the Arduino IDE, and select
|
|
|
|
|
the appropriate Pinout and CPU, or, if using `kaleidoscope-builder`, you can add
|
|
|
|
|
a `LOCAL_CFLAGS` setting to `.kaleidoscope-builder.conf`.
|
|
|
|
|
|
|
|
|
|
For the post-2016 variant (the default, also used by the handwired variant from
|
|
|
|
|
FalbaTech), if you want to explicitly select it, add
|
|
|
|
|
`-DKALEIDOSCOPE_HARDWARE_ATREUS_PINOUT_ASTAR=1`. For the pre-2016 variant, add
|
|
|
|
|
`-DKALEIDOSCOPE_HARDWARE_ATREUS_PINOUT_ASTAR_DOWN`. For the legacy teensy2 variant, add `-DKALEIDOSCOPE_HARDWARE_ATREUS_PINOUT_LEGACY_TEENSY2=1`.
|
|
|
|
|
|
|
|
|
|
To be able to flash the firmware, one will need the [Teensy Loader
|
|
|
|
|
CLI][teensy_cli] tool in addition to Arduino, if using a Teensy. If using an A*
|
|
|
|
|
MCU, the additional tool is not required.
|
|
|
|
|
|
|
|
|
|
[teensy_cli]: https://www.pjrc.com/teensy/loader_cli.html
|
|
|
|
|
[fw]: https://github.com/keyboardio/Kaleidoscope
|
|
|
|
|
[atreus]: https://atreus.technomancy.us/
|
|
|
|
|
[falba]: https://falba.tech/
|
